2 strokes are more popular for tuning, which is why this frame is more geared towards 2 strokes, but with a 4 stroke mounting plate it can be done. www.bikeberry.com/4-stroke-mounting-plate.html www.bikeberry.com/motorized-4-stroke-26-motor-ready-bicycle-w-2-4l-in-frame-gas-tank-diy.html
Is it possible to add a battery and automatic start as well as head and tail lights? I'm being forced to insure as well as register MVA this bike here in Baltimore if I want to use it as a commuter bike (a mile or so to work).
Talib Akil Bey wow man, that’s a shame! What happened to freedom of the people to ride our bikes without being harrased! You can’t take them on the freeway, they’re one seaters, and you can still pedal them!
I bought a Sprocket at $12 to replace plastic pulley.Ebay.Don't forget to drill through the mount bracket and into frame,to put a hardened screw through so the tensioner won't twist into your wheel.
Can you PLEASE tell me what forks to use on these frames. I Ordered just a frame thinking an easy transfer and I'm being screw by the front forks and have no idea how or what forks to put on. Any information would be helpful and MUCH APPRECIATED.
You need a inch and 1/8 headset unit that is semi integrated and an inch and 1/8 Fork either threaded or non threaded depending on which headset you get
I like mine. Only complaint i have is for whatever reason no matter what the rubber seal on the gas caps ALWAYS break an get torn up when screwing it on the tank?
We apologize for any problems this may have caused. Contact our customer service representatives at 1-800-317-0479. We'll try to help you however we can.
One extra note: Dont use a master link. It'll fall off and leave you stranded. When you push the pin in the chain out, leave it in the outer plate and reconnect them with the pin. 10x stronger and more reliable than a master link. Just my 2 cents.
Preston Golden Great question! This bike is compatible with our 4-stroke engine kits but the do require the use of a Heavy duty mounting plate. Below is a link to the part you would need. www.bikeberry.com/heavy-duty-4-stroke-mount-plate.html
Thanks for watching! We love these new frames and we hope you get a chance to build one. It took no time at all to put this motorize bike together (less than 4 hours). What should we show you next? Leave a comment down below :)
Update . Had to replaced the broken incomplete fork, it had no shocks, sleeves or mounts for brakes which I never recieved. Had to purchase a sprocket adaptor from Archers Bikes in Mesa AZ. These guys are lifesavers. The front axel was cracked , no tube in the janky front tire . Alll of the replacement parts i ordered were completly wrong. They said send them back and they will refund me. But why should I trust them to be honest when I cant even get a complete bike , only be buried in endless online paperwork that leads no where. Oh and the freewheel on the back wheel was pressed on backwards so thats a whole set of wheels that are junk! Some one from thier Facebook page threatned me with "recourse" if I didnt stop complaining on thier page implying I was making false statements. Here's what I know .I paid 549 dollars for a bike that was not what they advertised, an additional 215 dollars in replacement parts that were wrong for the application. 1000 dollars later and thanks to Archers Bikes I am way better off. I tried to delete my account, which they said only thier I.T dept can do that? Really? Unsubscribed from them only to continue to recieve adversements from them. The only kind of recourse I did recieve was an offer to recieve a discount on my next purchase of some large ammount of money! People are right these people are just a money pit and will bury you in paperwork that goes nowhere, take you money and send you junk!
What's the best quality, most durable, longest lasting, fastest, longest distance range, 4 stroke motorized bicycle that already comes with the motor mounted? Basically ready-to-go
I Know You're Right But for a gas bike I recommend a 4 stroke for range and reliability. Pedal starting a bike (2stroke) is a pain in the ass sometimes! The best ones you have to make yourself. The 2 I own, I’ve basically disassembled and rebuilt upgraded. I will leave one 2 stroke and convert my one with saddle bags to a 4 stroke engine! These companies don’t provide warranties and the bikes always break down unless you upgraded them with heavy duty parts. Most of the guys in your area usually have no idea what the fuck they’re doing and shouldn’t be building and selling anything! UA-cam has installation videos and you can find the upgrades on amazon, Ride on brother!⛽️🚲
Hey! I have a problem with my bike. I was using the first 3 tanks 16:1, and the engine ran really really good. I had the muffler off. I have finished the break-in period. I am now using 32:1 gas, 95 octane (The other is 100 wich I think is too strong). I have just now started to feel the bike not having power a couple of weeks ago. One morning I started it up, and it wasn't accelerating, it's idling very slow, sometimes even stopping (The idle screw is in so much, that if i twist it 1/4, I can't twist the throttle) the spark plug is light grey, i have fully cleared it with baking soda, and with a pin, put it back, still. I have tried every possible C-Clip position (Stock NT carburetor) If I don't have the throttle at least 1/2 pulled the engine doesn't ignite (From what I can hear) and only goes if I have it pulled fully. I have sealed both sides on the intake manifold with red hi-temp silicone (It doesn't melt untill 340 something celsius, or 644 fahrentheit) and it still does that. Not sure if it's an air leak still. I do have the low idling, wich when I'm not moving and have the clutch pulled, for some reason it fluctuates in RPM's a bit. I also hear a ratling or clanking sound inside the engine. I have looked into it and saw like a white paint like thing on the walls, they looked like they were dripping, but were completely dry. Could it be that my piston rings broke? Or does it not have compression? The head bolts are tight, the manifold has 1 screw that broke, also the part of the engine broke that the screw should be going into. I have replaced them with hex screws but still the same problem.
There could be an issue with the jet, which may need cleaning or replacing. There is also the possibility that it may be an issue with compression or with the carburetor. Contact our customer service representatives at 1-800-317-0479. We'd be happy to help you solve any problems you may have.
It turns out that the cylinder wall had all the chrome plating come off and all scratched. The piston destroyed it. I'm getting a new cylinder wall and piston too.
Yes, sometimes it does not fit in re first try. You might have hand file the side holes a bit just in case if it does not fit in properly. I have that type of problem and it is not a big deal for me. Who knows these gas tank frame may have improved.
1dirtysancho Instagram... I completely dissasemble and go thru every nut and bolt work my magic on every part then reasonable to my standards then reassemble making sure to loc-tite every single fastener to ensure many many miles of knees in the breeze Kool aid smiles.
I like the kit, the ' death pop ' chain tensioner, and model airplane plastic throttle turn me off . Fix those small flaws, and you have an excellent bike, well thought out .
Won't your muffler rattle off you didn't seem to use lock nuts Also is this compatible with the anti vibration mounts And the gasket for gas tank I wish was a little beefier for a better deal cause mine was kinda drippy at first till I attacked it with plumbers tape. Over all I love your bikes and your videos And will be likely watching many more of your kinda funny videos
Guys incorporate elastomer antivibe units into frame most of those 2 stroke engine kits vibrate like bees in a tin, The Antivibe rubbers found on Generator units, 40mm is plenty enough too tame those things. Also something under the chain tentioner, 5mm rubber matt should be enough to remove buzz but keep tight.
@@leroycoleman8501 in Florida you don't need one but keep in mind the bike cannot go over 15-30mph and you are required to have a front and rear light if you are riding at night
Thank you youtube for giving guys like me a platform to expose this shady company. And if anyone is trying to make a decision on who to buy thier bike parts from I hope they read this and save themselves a whole lot of time and money!
I have only three issue of this bike. The right part of the fork that hold the wheel is a bit bent. The peddle crank rod is a bit bent and the tires don't last long, it only last me 5 months. I replace them with continental bicycle tires and tubes. Haven't noticed any signs of wear. The parts are going to be replaced soon so its not a big deal for me
i m having the hardest time w 2 stroke engine . wont start . the only thing im suspicious about is the oil . the kit is chinese and it recommended 10w40 oil instead of 2 stroke . could that b the reason it wont start ? any help appreciated
im using 2 stroke oil with 30:1 ratio theres spark n gets wet may air leak ? i tighten the nuts n felt like it was trying to start but didnt . so i disassembled the exhaust n cleaned w spray multi task but i dont really sure if its clogged to stop from running , i will install again n try
Maybe there is an air leak somewhere. Stock carburetor does not have a very tight connection to intake manifold. Mine was leaking air through there and also would not start.
I just got this bike. If you look at back of bike where tire axle slides in horizontally it is not that way anymore. The bike i was sent about a week ago, the tire is installed vertically like normal (from under bike than pulled up at an angel) bikes you would buy at Walmart. When i questioned this they said this changed 6 years ago. But why do all their Bbr Tuning frames and complete 26 " Bikes on their site still show bike with a horizontal rear axle hook up. Even this video still shows the back axle horizontal hook up. This video and the companion to it are dated Dec. 2016 and Jan. 2017. Has anyone bought one of these bbr tunig 26" complete bikes with the rear axle hook up the way its shown here or did you get a vertical rear axle hook up like i did.
I spent 1000 dollasrs on a bike and parts which i cant track because the tracking number is bogus! My bike front forks are incomplete so I CANT MOUNT THE CALIPER BRAKES THAT I PAID FOR BUT NEVER RECIEVED ! aLSO THERES NO SOPROKET ADAPTOR THAT THEY SAY COMES ON THE BIKE!!!!
You need to get a pull start...if you start it by dumping the clutch all the time it will bust the studs out of the motor..and then you got left with a piece of Doo Doo...
This can certainly be the case with casual riders. Clutch start is very popular and standardized in closed circuit racing, and there is also the option of electric start engines. We carry most variations of engines that to fit every individuals needs.
how good do they glide compared to a bike with no motor ? my idea is to get going and glide most the time . want to actually pedal at times . need video of pedaling on the road . peal it. lol. thanks .. reply please. glide would extend very high milage . thanks .
A bike with a motor modification will maintain a similar coast experience as an unmodified bike. If installed correctly, it should not impede pedaling but may feel a bit sluggish when pedaling from a complete stop, due to the extra weight.
Having a brake and a clutch on the left handle grip if goofy! Why not include a double throw brake lever on the right side and the clutch on the right! Also on kit should come with that death trap chain tensioner! Heck one can be made using a simple spring and piece of metal and a longer spring! I guess the point I want to make is that if you know it's junk don't offer it! Include only quality parts in your kits! He you guys want to be known, be known for quality!
We're sorry you've had a negative experience with our service. We do try to work with every customer in solving any problem they may have, though, we are occasionally faced with conflicts regarding what we are capable providing. These conflicts may be due to void or expired warranty, item availability, or the lack of cooperation from the customer to find a solution. Contact our customer service representatives at 1-800-317-0479, we'd be happy to work with you in finding a solution.
You people that use that Chinese junk chain tensioner and end up pinching that chain so tightly in its turnaround from the drive axle make me laugh at the fact that you don't seem to realize that by doing that you put enormous stresses on the chain and all the other components. A real mechanic would not want to use such a setup on their own machine. It is bad engineering.
The stock parts for the engine are garbage, fuel line and filter, spark plug, spark plug wire, automotive fuel line and filter mr gssket brand, and accell hi supression 8mm sparkplug wire for higher performance and the ngk spark plug,just the wire alone produces very noticeable power and with the plug adds more to that power, try it sometime... thanks for the video
The bike frame should have mounting points for chain tensioner , rear motor mount also the u brackets are not as strong as mounting steel. By using thick rubber pieces on engine mounting points reduce vibrations.
What I've noticed by watching these videos of this guy installing these motors and parts he's really no more advanced then a hobbyist like for instance to two levers on one end of The Handlebar it's not that hard to get ahold of a double cable brake lever I love go on my bike it's like 20 bucks on Amazon
Whats your point? 1st off this is a "how to vid" its supposed to be a easy build vid and to show how easy it is to build using their kits + their bikes. However saying the guy doesn't have any real building skill just cause what his building in the video isn't hard is dumb
Why’s do you advertise a motorized bicycles that you won’t even stick to what you promised to your costumer. I reads many complaints that you don’t even care to correct or re inverse what’s they ordered and what pay for ? I was thinking of buying motorized bicycles from your company and what I have read in the costumers survey is not good.
Sorry, your comment is a little difficult to understand. Yes we have some unhappy customers who left bad reviews, but bad reviews does not mean we provided bad service. We also have a large portion of positive reviews that reflect our business model.
jun Boloy truth of the matter is most of those kits come with cheap plastic parts that should have been metal! Like the throttle for example. Why would you make the inside of the throttle instead of metal?! The hub for the sprocket usually dislocates because it’s bolted to weak rubber that warps under normal use! The chain tensioner that are in the kit works temporarily, so I deem them useless! You can turn them into great bikes once you spend a lot of money on upgrades because of the cheap garbage the kits come with and the kind of bike you use for your platform!⛽️🚲
Every time I buy from bikeberry I get fast shipping and the equipment is DIY. These guy's are always awesome.
simple method of hooking the chain just remove the output gear cover use the provided sparkplug tool to turn the small gear to feed your chain.
why not make a frame like this one for a 4 stroke motor?
You can use this for 4 stroke but need this mounting plate www.bikeberry.com/heavy-duty-4-stroke-mount-plate.html
2 strokes are more popular for tuning, which is why this frame is more geared towards 2 strokes, but with a 4 stroke mounting plate it can be done.
www.bikeberry.com/4-stroke-mounting-plate.html
www.bikeberry.com/motorized-4-stroke-26-motor-ready-bicycle-w-2-4l-in-frame-gas-tank-diy.html
Why even build a 4 stroke? Lol
They are just fine sure but kind of pointless
Can the sprocket be changed to a bigger tooth sprocket?
are you guys able to do a tutorial video on how to install the 2 stroke jackshaft kit?
This setup is the best value in the world. Also easy to build for the novice.
Can u tell me this wheel name?...I mean... Without spoke wheel... What said? Name of this type of wheel?
Is it possible to add a battery and automatic start as well as head and tail lights? I'm being forced to insure as well as register MVA this bike here in Baltimore if I want to use it as a commuter bike (a mile or so to work).
Talib Akil Bey wow man, that’s a shame! What happened to freedom of the people to ride our bikes without being harrased! You can’t take them on the freeway, they’re one seaters, and you can still pedal them!
Yes it can be done. They have full kits for adding e-starts.. lights just get scooter/mopad parts controls
can u do a video showing how to assemble a bike
Do you have instructions on how to assemble and install all the fork shaft components?
That is one awesome looking frame and rims !
I bought a Sprocket at $12 to replace plastic pulley.Ebay.Don't forget to drill through the mount bracket and into frame,to put a hardened screw through so the tensioner won't twist into your wheel.
Can you PLEASE tell me what forks to use on these frames. I Ordered just a frame thinking an easy transfer and I'm being screw by the front forks and have no idea how or what forks to put on. Any information would be helpful and MUCH APPRECIATED.
Patrick Fanitzi check out my bmx Motorized bike
You need a inch and 1/8 headset unit that is semi integrated and an inch and 1/8 Fork either threaded or non threaded depending on which headset you get
The kit needs a spring loaded chain tensioner!
nicholascremato and a metal throttle, upgraded sprocket and hub!
I like mine. Only complaint i have is for whatever reason no matter what the rubber seal on the gas caps ALWAYS break an get torn up when screwing it on the tank?
We apologize for any problems this may have caused. Contact our customer service representatives at 1-800-317-0479. We'll try to help you however we can.
Find an Oring thats Fuel proof and install instead
Stock762 same for me too
How much is the kit Bicycle and engine cost and to ship it to Brazil ? thank you
One extra note: Dont use a master link. It'll fall off and leave you stranded. When you push the pin in the chain out, leave it in the outer plate and reconnect them with the pin. 10x stronger and more reliable than a master link. Just my 2 cents.
You need to make a youtube video of this technique
how do i get this spacer in between sproket and frame of rear wheel. ? looks like it helps not put stress on the frame!
great video, more detail than I've seen before. it's a petcock, however, not a fuel valve ;)
I’ve all ready built two moto bikes but I like watching how to build them
Will this frame accommodate a 4cycle bike engine as well?
yes
Preston Golden Great question! This bike is compatible with our 4-stroke engine kits but the do require the use of a Heavy duty mounting plate. Below is a link to the part you would need. www.bikeberry.com/heavy-duty-4-stroke-mount-plate.html
Whats that spacer on the sproket?
It is an adapter for our older model of sprockets, allowing the sprocket to be mounted to the disc brake mount that is used on our mag wheels.
Thanks for watching! We love these new frames and we hope you get a chance to build one. It took no time at all to put this motorize bike together (less than 4 hours). What should we show you next? Leave a comment down below :)
Do u offer any liquid cooling systems for this , i want to take my bike on a 300mile roadtrip
ỏm wni pvey
Anh Nguyen english?
Update . Had to replaced the broken incomplete fork, it had no shocks, sleeves or mounts for brakes which I never recieved. Had to purchase a sprocket adaptor from Archers Bikes in Mesa AZ. These guys are lifesavers. The front axel was cracked , no tube in the janky front tire . Alll of the replacement parts i ordered were completly wrong. They said send them back and they will refund me. But why should I trust them to be honest when I cant even get a complete bike , only be buried in endless online paperwork that leads no where. Oh and the freewheel on the back wheel was pressed on backwards so thats a whole set of wheels that are junk! Some one from thier Facebook page threatned me with "recourse" if I didnt stop complaining on thier page implying I was making false statements. Here's what I know .I paid 549 dollars for a bike that was not what they advertised, an additional 215 dollars in replacement parts that were wrong for the application. 1000 dollars later and thanks to Archers Bikes I am way better off. I tried to delete my account, which they said only thier I.T dept can do that? Really? Unsubscribed from them only to continue to recieve adversements from them. The only kind of recourse I did recieve was an offer to recieve a discount on my next purchase of some large ammount of money! People are right these people are just a money pit and will bury you in paperwork that goes nowhere, take you money and send you junk!
Why is the wiring just left dangling? The connections are exposed. On my bike it's all concealed
What's the best quality, most durable, longest lasting, fastest, longest distance range, 4 stroke motorized bicycle that already comes with the motor mounted? Basically ready-to-go
We do not sell any preassembled gas bikes. If you want something ready to ride on arrival your best bet would be to purchase an electric bicycle.
BikeBerrycom What's the best one you guys sell?
I Know You're Right But for a gas bike I recommend a 4 stroke for range and reliability. Pedal starting a bike (2stroke) is a pain in the ass sometimes! The best ones you have to make yourself. The 2 I own, I’ve basically disassembled and rebuilt upgraded. I will leave one 2 stroke and convert my one with saddle bags to a 4 stroke engine! These companies don’t provide warranties and the bikes always break down unless you upgraded them with heavy duty parts. Most of the guys in your area usually have no idea what the fuck they’re doing and shouldn’t be building and selling anything! UA-cam has installation videos and you can find the upgrades on amazon, Ride on brother!⛽️🚲
I’m a little nervous ordered this bike and motor sure be here today but ups says it only weighs 29lbs?!?!
give us a call and we can help you out. (800)317-0479
nerdy nomad wow, sounds like an incomplete shipment. If it comes to you like in the vid, you will have a beautiful build!!
What is the "white wire" do??
It is for auxiliary power, such as head lights.
hello I see few video but nothing about to install the cranset I need help
Where can I get a sprocket like this one?
Bikeberry.com
Check out our website or contact our customer service representatives at 1-800-317-0479.
Hey! I have a problem with my bike. I was using the first 3 tanks 16:1, and the engine ran really really good. I had the muffler off. I have finished the break-in period. I am now using 32:1 gas, 95 octane (The other is 100 wich I think is too strong).
I have just now started to feel the bike not having power a couple of weeks ago. One morning I started it up, and it wasn't accelerating, it's idling very slow, sometimes even stopping (The idle screw is in so much, that if i twist it 1/4, I can't twist the throttle) the spark plug is light grey, i have fully cleared it with baking soda, and with a pin, put it back, still. I have tried every possible C-Clip position (Stock NT carburetor) If I don't have the throttle at least 1/2 pulled the engine doesn't ignite (From what I can hear) and only goes if I have it pulled fully. I have sealed both sides on the intake manifold with red hi-temp silicone (It doesn't melt untill 340 something celsius, or 644 fahrentheit) and it still does that. Not sure if it's an air leak still. I do have the low idling, wich when I'm not moving and have the clutch pulled, for some reason it fluctuates in RPM's a bit. I also hear a ratling or clanking sound inside the engine. I have looked into it and saw like a white paint like thing on the walls, they looked like they were dripping, but were completely dry.
Could it be that my piston rings broke? Or does it not have compression? The head bolts are tight, the manifold has 1 screw that broke, also the part of the engine broke that the screw should be going into. I have replaced them with hex screws but still the same problem.
There could be an issue with the jet, which may need cleaning or replacing. There is also the possibility that it may be an issue with compression or with the carburetor. Contact our customer service representatives at 1-800-317-0479. We'd be happy to help you solve any problems you may have.
It turns out that the cylinder wall had all the chrome plating come off and all scratched. The piston destroyed it. I'm getting a new cylinder wall and piston too.
How about what size petcock to get that's not included
On a scale of 1 to 10 how solid are those Wheels on the bike I've been thinking about getting some
What size free wheel sprocket fits the 26inch bbr bike chain I’m getting the rims
can you do a video on the lightning cdi box next because i bot one and dont know how to install it
You asked for it: ua-cam.com/video/kEET3-v1t2M/v-deo.html
How much that in frame in the Philippines sir? And in the Philippines we can buy that frame?
I have a 29 BCA bike will a 50cc fit on it off of a 26"
Does the front mounts on frame support 8mm studs like my bbr angle fire motor?
Yes, sometimes it does not fit in re first try. You might have hand file the side holes a bit just in case if it does not fit in properly. I have that type of problem and it is not a big deal for me. Who knows these gas tank frame may have improved.
You should let me build one for you with my custom touches such as hand made aluminum Port matched intake and exhaust gaskets custom boost bottles
Sounds great! We just might take you up on this offer.
BikeBerrycom my trick boost bottle fools everybody!!!😎 I'll send you guys a link on my Instagram
1dirtysancho Instagram... I completely dissasemble and go thru every nut and bolt work my magic on every part then reasonable to my standards then reassemble making sure to loc-tite every single fastener to ensure many many miles of knees in the breeze Kool aid smiles.
Boost Bottles dont work.
the latest thing is 4cyc with belt drive
Definitely a fun option. There's a perfect engine for everyone
You guys made a custom frame without a dedicated bracket for the chain tensioner? Why??
I like the kit, the ' death pop ' chain tensioner, and model airplane plastic throttle turn me off . Fix those small flaws, and you have an excellent bike, well thought out .
Do you guys sell just the frames? I have a neck and bars i want to use and want a Springer frontend.
Yeah they do
Where do you connect the wires for the kill switch?
What? He shows that in the vid. And there is only 1 spot to put them. Black with black bule with red
I need one
EXCELLENT VIDEOS, What frame fits a HONDA GX160 engine?
Your moms frame might take it
Won't your muffler rattle off you didn't seem to use lock nuts
Also is this compatible with the anti vibration mounts
And the gasket for gas tank I wish was a little beefier for a better deal cause mine was kinda drippy at first till I attacked it with plumbers tape.
Over all I love your bikes and your videos
And will be likely watching many more of your kinda funny videos
what shot is 26?
How much for one of those bikes? Without the motor.
looks good
Guys incorporate elastomer antivibe units into frame most of those 2 stroke engine kits vibrate like bees in a tin, The Antivibe rubbers found on Generator units, 40mm is plenty enough too tame those things. Also something under the chain tentioner, 5mm rubber matt should be enough to remove buzz but keep tight.
We do carry a vibration motor mount which fulfills your exact requirements.
Will this work with the Flying Horse 5G 4-Stroke Bicycle Engine Kit?
Calvin Williams yes it would
do you have to have a lisence to drive it on the streets
Depends on your local state and city regulations.
okay thanks i'm in illinois
@@leroycoleman8501 in Florida you don't need one but keep in mind the bike cannot go over 15-30mph and you are required to have a front and rear light if you are riding at night
Are they any 4 stroke engine options?
nicholascremato ive seen a few youtuber just mount the 4 stroke mount over the pedestral mount..
What is the bottom bracket size
It's a standard one piece bb
What is the price?
I've been trying for days to get ahold of bike berry to order the bike nobody's answer's the phone or returns my calls
is the rims plastic
This is fantastic!!!
Thank you youtube for giving guys like me a platform to expose this shady company. And if anyone is trying to make a decision on who to buy thier bike parts from I hope they read this and save themselves a whole lot of time and money!
I have only three issue of this bike. The right part of the fork that hold the wheel is a bit bent. The peddle crank rod is a bit bent and the tires don't last long, it only last me 5 months. I replace them with continental bicycle tires and tubes. Haven't noticed any signs of wear. The parts are going to be replaced soon so its not a big deal for me
and four strokes fit?
i m having the hardest time w 2 stroke engine . wont start . the only thing im suspicious about is the oil . the kit is chinese and it recommended 10w40 oil instead of 2 stroke . could that b the reason it wont start ?
any help appreciated
Ahmad Mustafa As long as it's two stroke oil and the ratio is right, it's fine. Does the spark plug get wet? Is there a spark?
im using 2 stroke oil with 30:1 ratio
theres spark
n gets wet
may air leak ?
i tighten the nuts n felt like it was trying to start but didnt . so i disassembled the exhaust n cleaned w spray multi task but i dont really sure if its clogged to stop from running , i will install again n try
Maybe there is an air leak somewhere. Stock carburetor does not have a very tight connection to intake manifold. Mine was leaking air through there and also would not start.
hi
im going to try that thanx
god bless
let me know if that worked for you
I want one of these frames so bad
I want one please give me information
are these engines from China or are they a decent quality?
I just got this bike. If you look at back of bike where tire axle slides
in horizontally it is not that way anymore. The bike i was sent about a
week ago, the tire is installed vertically like normal (from under bike
than pulled up at an angel) bikes you would buy at Walmart. When i
questioned this they said this changed 6 years ago. But why do all their
Bbr Tuning frames and complete 26 " Bikes on their site still show bike
with a horizontal rear axle hook up. Even this video still shows the
back axle horizontal hook up. This video and the companion to it are
dated Dec. 2016 and Jan. 2017. Has anyone bought one of these bbr tunig
26" complete bikes with the rear axle hook up the way its shown here or
did you get a vertical rear axle hook up like i did.
probably they didn't change all the add because of the price to redo them
looking for 29"oceancruisertires
Try Harris cyclery online. They have a pretty good selection.
Nice! Very helpful!
I need a good parts venor.
Good
my motor mounts arent matching.....
Give us a call at
Toll Free: (800)317-0479
we will be happy to help
its that back wheel i want
Very helpful
I spent 1000 dollasrs on a bike and parts which i cant track because the tracking number is bogus! My bike front forks are incomplete so I CANT MOUNT THE CALIPER BRAKES THAT I PAID FOR BUT NEVER RECIEVED ! aLSO THERES NO SOPROKET ADAPTOR THAT THEY SAY COMES ON THE BIKE!!!!
That sucks get a refund bro
You need to get a pull start...if you start it by dumping the clutch all the time it will bust the studs out of the motor..and then you got left with a piece of Doo Doo...
This can certainly be the case with casual riders. Clutch start is very popular and standardized in closed circuit racing, and there is also the option of electric start engines. We carry most variations of engines that to fit every individuals needs.
you can install a pullstart yourself they sell them aswell
Definitely worth $600
Ikr
You should of used a better chain tensioner
when are they going to come out with ...new chain ideal pulleys ....for these motors they are worth less and dangers to use >????
That was super easy, i didnt have to do a thing.
OMG look who they hire lol
what's up man.
chain idle pully ? you mean chain tensioner
awesome
Same goes for that junky fuel hose! Don't sell it! Include a quality peices of fuel line with each kit!
You guys need to upgrade your bbr motor bike with a twin cable brake lever
The pull start kit
how good do they glide compared to a bike with no motor ? my idea is to get going and glide most the time . want to actually pedal at times . need video of pedaling on the road . peal it. lol. thanks .. reply please. glide would extend very high milage . thanks .
A bike with a motor modification will maintain a similar coast experience as an unmodified bike. If installed correctly, it should not impede pedaling but may feel a bit sluggish when pedaling from a complete stop, due to the extra weight.
That masterlink install was painful to watch
Having a brake and a clutch on the left handle grip if goofy! Why not include a double throw brake lever on the right side and the clutch on the right! Also on kit should come with that death trap chain tensioner! Heck one can be made using a simple spring and piece of metal and a longer spring! I guess the point I want to make is that if you know it's junk don't offer it! Include only quality parts in your kits! He you guys want to be known, be known for quality!
خوش مكينه
worst customer service ever . they still owe me a fork that i never got .
We're sorry you've had a negative experience with our service. We do try to work with every customer in solving any problem they may have, though, we are occasionally faced with conflicts regarding what we are capable providing. These conflicts may be due to void or expired warranty, item availability, or the lack of cooperation from the customer to find a solution. Contact our customer service representatives at 1-800-317-0479, we'd be happy to work with you in finding a solution.
You people that use that Chinese junk chain tensioner and end up pinching that chain so tightly in its turnaround from the drive axle make me laugh at the fact that you don't seem to realize that by doing that you put enormous stresses on the chain and all the other components. A real mechanic would not want to use such a setup on their own machine. It is bad engineering.
The stock parts for the engine are garbage, fuel line and filter, spark plug, spark plug wire, automotive fuel line and filter mr gssket brand, and accell hi supression 8mm sparkplug wire for higher performance and the ngk spark plug,just the wire alone produces very noticeable power and with the plug adds more to that power, try it sometime... thanks for the video
The bike frame should have mounting points for chain tensioner , rear motor mount also the u brackets are not as strong as mounting steel. By using thick rubber pieces on engine mounting points reduce vibrations.
This doesn't tell me how to install the forks
What I've noticed by watching these videos of this guy installing these motors and parts he's really no more advanced then a hobbyist like for instance to two levers on one end of The Handlebar it's not that hard to get ahold of a double cable brake lever I love go on my bike it's like 20 bucks on Amazon
$12.50 for a year now,and holding.
Whats your point?
1st off this is a "how to vid" its supposed to be a easy build vid and to show how easy it is to build using their kits + their bikes.
However saying the guy doesn't have any real building skill just cause what his building in the video isn't hard is dumb
C washer bro
Bikeberycom?nummer vatsap?
?
@@bikeberry vatsap nummer ?
@@elsahibquliyev8478 sorry we only speak english and spanish.
Why’s do you advertise a motorized bicycles that you won’t even stick to what you promised to your costumer. I reads many complaints that you don’t even care to correct or re inverse what’s they ordered and what pay for ? I was thinking of buying motorized bicycles from your company and what I have read in the costumers survey is not good.
Sorry, your comment is a little difficult to understand. Yes we have some unhappy customers who left bad reviews, but bad reviews does not mean we provided bad service. We also have a large portion of positive reviews that reflect our business model.
jun Boloy truth of the matter is most of those kits come with cheap plastic parts that should have been metal! Like the throttle for example. Why would you make the inside of the throttle instead of metal?! The hub for the sprocket usually dislocates because it’s bolted to weak rubber that warps under normal use! The chain tensioner that are in the kit works temporarily, so I deem them useless! You can turn them into great bikes once you spend a lot of money on upgrades because of the cheap garbage the kits come with and the kind of bike you use for your platform!⛽️🚲
@@michaelroberson6490 You can purchase stronger manufactured parts, the kits come with standard parts.
BikeBerrycom that’s what I meant.
@@michaelroberson6490 ALL
junk from china
only 599.00 just for the bike no motor
Haha my boy calls the slide a plunger haha he doesn’t know what he’s talking about