I'm actually holding back on some stuff now because there are idiots all over that would use ideas for the bad. I do what I can to help and inspire. But sometimes I let a few concepts slip non intentionally. Esp when talking about chemical reaction potentials hehe.
You and your videos have always been interesting, what you have done is become better at explaining yourself and your concepts on video. Been watching for a while, love seeing your progress friend. @@joellagace1679
This is pretty awesome, and also very useful , i got solar where i live, no grid, and batteries are the most expensive part of the setup. I have 3/4 of the batteries i got unbalanced, which makes my whole system completely unusable at night. Thank God for dc leds. Would love to see you demo this in practice - and especially if you can address real practical use - meaning with which setup can i have this design, while also connected to my solar charger and inverter, do i need to physically change modes and run your charging trick while not charging with solar, or is this safe under all charging and discharging phases. My setup is 2s2p each being 12v150ah or 24v300ah in total nominal ( its gel so about half can be utilized ). Once your system balances out, it's a 24v circuit, which is what i have here, except no bms or any balancing apart from me changing battery locations fml Anyhow hope this finds you well, thanks a lot and all the best 🙏💜
@@brianp5210 Plasma channel made an impressive electret from polyurethane I believe. It had a permanent polarised field of static electricity. And it picked stuff up like a magnet or repulsed.
@@brianp5210 and by ambient atmospheric I am referring to the charge in the room, electrits do intract with the relic neutrinos there for may potentially be used a neg mag, weither there is a way to build an opposite of a standard generator with the thought of collecting remains to be seen,tested....
Great post Joel. Now, how do we choose the correct capacitor such that we do not fry Battery B with too high a voltage spike? I have seen many batteries die from the high voltage spaking they've gotten from my Pulse Electric Motor setups. Using an SCR (Thyristor) with a voltage ref could be an option. However I am seeking the best and most efficient method that doesn't hurt the battery and ultimately allow for an energy gain. Any insights you can offer for determining this spike-handling setup would be great. Cheers. :)
I'd suggest a fractal capacitor array. Robert Murray Smith did an excellent video on the subject. You can repeatedly halve the voltage or double the voltage to reach the desired transformation which suits your batteries.
because the balancing can swing back and forth in time. Once one battery see's a higher potential of the other. And if you are very lucky at some point when both get to the same voltage the cap will dump half of its charge on each battery. This system wants to always balance, So if you pri is higher it will try and balance out, if the secondary is higher it will try and balance it back into the primary etc...
Joel and these impulses won't burn the battery? If one battery is permanently loaded and reduces power relative to the other, do you have to switch the load source or will the one charged higher charge the loaded one?
Well you can go home and play with your 30 year old Bedini system and not learn anything new :) or you are welcome to stick around and catch up! Your choice.
Your videos are getting more interesting 😊😁
I'm actually holding back on some stuff now because there are idiots all over that would use ideas for the bad. I do what I can to help and inspire. But sometimes I let a few concepts slip non intentionally. Esp when talking about chemical reaction potentials hehe.
You and your videos have always been interesting, what you have done is become better at explaining yourself and your concepts on video. Been watching for a while, love seeing your progress friend. @@joellagace1679
This is as simple and smart as free energy can get! Go Joel!
Another great video thanks for more inspiration Potential difference capacitive charging
Great video, the schematics are very helpful.
@@TheFairKnight hello fellow ancap. 👋
- From an agorist.
✌️
Nice!
This is great. Thanks Joel! 👏 👍
Great job!
Nice! ❤
yes, a collapsing magnetic field should give a plus in output ...
INSANE AWSOME BROTHER 👍👍👍👍👍✅🏆
This is pretty awesome, and also very useful , i got solar where i live, no grid, and batteries are the most expensive part of the setup. I have 3/4 of the batteries i got unbalanced, which makes my whole system completely unusable at night. Thank God for dc leds. Would love to see you demo this in practice - and especially if you can address real practical use - meaning with which setup can i have this design, while also connected to my solar charger and inverter, do i need to physically change modes and run your charging trick while not charging with solar, or is this safe under all charging and discharging phases. My setup is 2s2p each being 12v150ah or 24v300ah in total nominal ( its gel so about half can be utilized ). Once your system balances out, it's a 24v circuit, which is what i have here, except no bms or any balancing apart from me changing battery locations fml
Anyhow hope this finds you well, thanks a lot and all the best 🙏💜
Awesome! I wonder if this would be even more efficient if one were to use the Tesla power transfer method in combination with this circuit?
Sounds brilliant. Curious if this is dealing at all with high voltage spikes, as those don’t work great for the batteries I have (LifePo4).
Maybe you could try using your wond-up coax cable?
Awesomeness.. could you stuff an electrit in the coil? Or pre coil to hassen the influx of the ambient atmospheric... ?
Edited because people seem to have the ability to write pretty well but can't seem to read. You guys are more lost than I am lmao
@@brianp5210 Plasma channel made an impressive electret from polyurethane I believe. It had a permanent polarised field of static electricity. And it picked stuff up like a magnet or repulsed.
@@ianjackson4571 exactamundo!
@@brianp5210 and by ambient atmospheric I am referring to the charge in the room, electrits do intract with the relic neutrinos there for may potentially be used a neg mag, weither there is a way to build an opposite of a standard generator with the thought of collecting remains to be seen,tested....
Great post Joel. Now, how do we choose the correct capacitor such that we do not fry Battery B with too high a voltage spike? I have seen many batteries die from the high voltage spaking they've gotten from my Pulse Electric Motor setups. Using an SCR (Thyristor) with a voltage ref could be an option. However I am seeking the best and most efficient method that doesn't hurt the battery and ultimately allow for an energy gain. Any insights you can offer for determining this spike-handling setup would be great. Cheers. :)
I'd suggest a fractal capacitor array. Robert Murray Smith did an excellent video on the subject. You can repeatedly halve the voltage or double the voltage to reach the desired transformation which suits your batteries.
Maybe you can connect more batteries in series to match the voltage?
You can use a Toroid coil, it's more efficient.
Assymetric potential differentials 🤗
Can I use multiple coils in series to improve impedance?
Best to use one big coil.
What is the cap non polarized?
because the balancing can swing back and forth in time. Once one battery see's a higher potential of the other. And if you are very lucky at some point when both get to the same voltage the cap will dump half of its charge on each battery. This system wants to always balance, So if you pri is higher it will try and balance out, if the secondary is higher it will try and balance it back into the primary etc...
Joel and these impulses won't burn the battery? If one battery is permanently loaded and reduces power relative to the other, do you have to switch the load source or will the one charged higher charge the loaded one?
But in this specific picture the coil back emf spike will jus shorts out across the coil.
❤
🪫💥🔋💚
Can't order RestoraLax because Canada is on a postal strike! 🤬
Chaotic, insubstantial babbling.
Someone is hurt lol
@joellagace1679 You !
Such quality opinion from a person like you lmao. Maybe read the comments from others that know this stuff as well as me to help you out.
@@joellagace1679 More insubstantial babbling.
Well you can go home and play with your 30 year old Bedini system and not learn anything new :) or you are welcome to stick around and catch up! Your choice.