I'm a mechanic, we usually just get new or remanufactured modules. Never thought to send a board out for repairs. I'm so used to dealing with the manufacturer and aftermarket that it never crossed my mind. Some are very expensive. Might be worth having repaired. Not to mention that it can take weeks to aquire sometimes.
the biggest issue with a lot of automotive electronics is the presence of potting compounds, conformal coatings (principally for environmental and anti-explosion concerns - keeping the weather out and fire in) and a host of anti-tamper measures generally making them a bear to work on. if you consider the labour required to curcumvent those, diagnose and repair the fault THEN return it to OE standards... is probably why you don't see a lot of refurbished ECU's about, particularly when there's the option of buying them from breakers. also, from experience trying to repair a potted/coated PCB is the stuff of nightmares, it's really hard work not to do more damage to the board and/or components just removing the stuff.
This is how my brother became successful doing 1 man plant repairs. He could fix things in a couple of days that other service centers would take weeks to do.
@@kaelin000 yep, the conformal coating is a big pain in the ass. Some boards are just dipped in simple varnish(Valeo/Aptive BSI boards), some are coated with silicone(Hirschmann boards in the BMW sharkfin antennas), but the new standard is epoxy resin. The new Valeo windshield wiper motor assys are filled with epoxy resin. The motor housing contains the relay and the electronic board for the timed wiping and the rain sensor. If the relay fails(which are usually do), then you need to replace the whole assembly with the perfectly fine motor and electronics.
You are clearly building a reputation in the PCB Repair circle, where those responsible for 100s of Thousand Dollars worth of Machinery are turning to you for repairs of such items.... To think - just how far you have come in such a short period of time is quite amazing... That RTX 1070 of your's that needed repair during Covid was a God send.
Those Ferretti yachts cost around $1m a shot, so the owner can probably well afford a ‘super expedited service’ fee :-) The control panel incorporates a wireless link to a pendant controller for the engines and side thrusters which is worn on a lanyard around your neck, so the boat owner can reverse the craft into a tight mooring space while standing away from the helm.
@@filips7158after talking to multiple boat owners I can happily say I probably will never buy one. Not too interested in the hobby but more power to those who enjoy it🤘🏾.
Who doesn't love a "money is no object" customer? If there is any indicator that you are the man, it's when you are sought out by this type of customer.
These are usually the worst people to deal with ... unrealistic expectations and they think you "owe" them when its said and done ... unless the dude didn't actually say that and he's just rich as f*ck
I've repaired a similar output stage on a board for a nearby farmer's John Deere years ago. The cable leading to a solenoid next to the plow was just shorted to ground because of mechanical damage. The guy fixed the cable and I replaced the failed transistor and I also had to repair the PCB with a bypass wire. As I know, he's still using that tractor on his field. So I think the yacht owner will be also satisfied, as I think, there was a similar problem on the vehicle.
I’m a technician for a certain fast food chain, a lot of our boards are going down on all our equipment and we usually junk the boards and replace (1,100 per board), if you see a big order from your store; you’ll know the request I submitted got approved 👍
Ladies more slender fingers are frequently more useful in such work. ME here that started as an EE, and worked for several companies where electronics & microelectronics utilized women as the primary line workers. Excellent skills those women had.
When you stated the component was fused to the board, I heart sank for the customer. I was glad when you removed the part without incident. Great job, Alex.
It's really special watching a human being reach the highest level of a certain skill and then show their craft to the world. Narrow talent is a just beautiful
love this guys work very smart indeed and i could never understand why people would ever be unhappy with him and his repairs or stuff he just could not fix and he is straight forward with his customers
I like how the channel author manages to avoid the long investigations on the boards and concentrates on the ones where the job is clear. We don't see what's behind the scene ofc but that's actually smart (or so it appears)
It's truly amazing to witness your capabilities. If we were to establish the concept of UA-cam mentors, I must say, you would undoubtedly stand out as the finest mentor I've ever had. I extend my heartfelt gratitude for the tireless effort you invest in disseminating your extensive knowledge. Your humility is evident, never seeking self-aggrandizement or anything in return. My wife and I firmly believe in the power of spreading positive influence, whether it pertains to refining social skills or, in your case, generously sharing years of experience and wisdom. I may not have an exact grasp of the duration you've been engaged in this noble endeavor, but I am acutely aware that the process of accumulating such a wealth of knowledge would demand a significant investment of time-potentially up to two decades-if I were to tread that path independently. Thank you for making a profound impact, one that transcends cultural boundaries and languages.
I really enjoy these soldering videos. I attempted to teach myself soldering (this was years before the public internet) for plumbing pipes and also electronics. I did buy a few very good books that coverred soldering. Anyway, all I did was make a big mess, I just gave up after a few attempts because I didn't have an actual project I needed to get done.
What i would like to see, if the customer agrees of course, is that when you fix a board like this which you cant test. That the person who brought it in makes a short vid of it actually working in the vehicle or device they put it into.. Not sure how this would work but there might be customers up for it as they probably heard of you through word of mouth or youtube. (maybe give them a small discount)
OK so delicate second-stage physical repair. It's the fault-finding I find interesting. My lesson from this is about using low-melt solder to help desolder.
I hope the customer orders genuine versions of those components from a reputable supplier to have on hand in case the knockoff ones fail, for the next repair. But they may not even know that ordering something with the same number from Ama*** is not the same as ordering it from Digikey/Mouser/whatever.
The only thing I understood was it was a Ferretti motherboard. The rest was totally incomprehensible to a non-techie, but the video was absolutely fascinating. The skill and precision it takes to repair these components is amazing.
About the only time in life you'd be happy paying premium for three hours and only getting 16 minutes :D Enjoyed seeing something a bit bigger, and the challenges that brought. Wouldn't have thought to snip the pins, I'll remember that. Nice.
When soldering tabs on the power supply, you must make sure that the TAB is fully soldered to the pad on the PCB. This both for conductivity and for heat transfer. A little dab of solder paste on the PAD should do the trick as capillary action can not be counted on with such heat slugs. Now about the engineer who designed the board. Those parts are severely under heat sinked for the size loads that the part is designed for. The engineer may have made the right calculations if the load may be significantly less than the part is capable of.
That's what the hot air tool was for. With the flux under the thermal pad, the solder would have wicked along the entire length of the metal interface.
Bro I run a super small marine electronics company out of New orleans, I'm always pulling broken gear off of vessels. If you ever want an old radar system, transducer depth system or old marine display to have for a repair video for free to keep and play with let me know I'll save you the next one I pull off.
@VashStarwind without schematics you'd just be guessing. Hopefully a boat tech that can get a board repaired can also understand wider electronics repair on the other boat equipment that probably caused this failure.
If the customer is requesting to change specific components then it is assumed that the customer knows what the issue is and your job is to change the components as requested. 🤷♂️ That’s what they’re paying. Not for diagnosis.
Ship ahoy! Anchors away! Splice the main sail, and so on! Blimey! How long before NASA come calling on Alex to remotely fix the wandering rover on the planet Mars? Awesome Alex!
You know they're paying Alex a boat load of money when he holds the board up very carefully with shaky hands haha. But serious chat, you do amazing work and the pun was definitely intended.
Mind playing tricks, when Alex first used hot air and mentioned the smell it's like I could literally smell it. If you know you know! You just don't forget that charred board smell! It's no telling what that control board cost💲 Nice work!
It's lucky the customer has tested the drivers and bias components before supplying only the output devices. I'd expect a cascade failure when there's that much destruction. I guess they were going to test it back on the yacht and find out if they had fixed the over-current situation
that's clean. and money was no object. *and* customer provided the parts. how awesome was that? that's awesome, *that's* how awesome that was. that was an extra weeks worth of vacation is how awesome that was. that's why you got into this business, is how awesome that was.
Wow. so that was amazing. thank you. I burnt my board soldering an electrical tester. it was our final exam in soldering course as part of electronics core. that was over 20 yrs ago. fun video. brings back memories of school.
The parts that you have been replaced looks like switching some high current motor or something else so if the parts burn like that probably new parts will burn again owner has to be carrefull about that.the job was easy for Alex he did well what the customer needs well done
You would hope the owner knows exactly what he switched on that burnt out the board and has replaced it. Maybe it was a freak accident like a motor stalled by a rope tangle or something.
The customer could be an expert on those parts for all you know. Maybe they accidently shorted something and don't have soldering skills. They just needed someone who could take the parts and put them on fast.
@@southerncharity7928 No, being able to diagnose something doesn't mean you have the skills to do component replacement, nor the equipment, time, space etc....
20 years ago we had a rare old cnc machine Mobo go out. Only one was sourced in Israel, so a (un) lucky employee with a passport got to fly to Israel, get handed a Mobo box , and get back on a plane for return...as I recall, it was $8000 for the trip and fees. and another $10,000 for board. Production line was $38,000 an hour lost revenue. When our lasers went out , a service man from AUSTRALIA would fly out ASAP overnight and stay till job was done , then go back to OZ. Now we have you to call! Nice.
I repair tube amplifiers from the late 1940's through 80's and I would love to transition to this someday as I turn down work on all modern, double sided PCB amps. I learn a lot from watching you, thank you.
I’m sure you will find many of the newer modelling amps are multilayer boards, with loads of via holes to cause issue. Even in the early 2000’s some consumer HiFi’s had 5 layer boards.
While Northridge Fix's content is fantastic for component level repair, also checkout Barevids amplifier repairs (also youtube channel); he is UK based and does in car audio amplifier work that I assume is transferrable to other amplifiers - his repairs often include the troubleshooting process of the different sections of D class amps.
See, to me, those old tube amps are a lot more complicated than a modern PCB. Most of the time all the components are just soldered to each other in line, and stuffed into a box. I always figure it out eventually, but it sure would help if everything were nicely fastened to a board.
There's no way that the board didn't suffer more damage with those kind of burnt components. But I would guess that was the very first thing that was told to the customer. So the customer gets what the customer requests, if he's willing to pay.
When I was in the Army I was a 27E, one of the only MOS at the time that repaired its own test equipment. I worked on Dragon, Tow, Javelin launcher's and trackers. I could repair a lot of the equipment and yet there was still stuff I sent to be repaired by civilians. This is what I imagine the civilians did.
I met Alex a few months ago for my wife’s soaked macbook. We had an educational conversation about why my Crapple phone sucks and why Samsung phones rules. I now own 2 Samsung phones. Hope the house hunting works in your favor!
From the title alone i already knew what would be said "Money is no issue get it done today" Words from the owner and crews and maintenance people of every yacht ever - i deal with them quite often in my trade, and have pulled some impressive hail mary's to get things done. I also take tips 🙂 That said half the time they want pure unobtainium from a small country across the globe NDA'd and its wild.
I used to design some electronics for a containership company. I spoke with these guys what theire experience was with this matter. They said that either you do nothing, not even seal the electronis or clousure so that there is plenty of ventilation, or you have to seal it of so incredible well that in the future repairs will be impossible. Half solutions will cause moisture build up and you be worse off then doing nothing. These ships would offcourse sail from the north to the tropics.
I dont know much about the if the moist air with salt affects electronics in such a negative way, but what I can say is that there will be no liquid water on the parts and the air shouldnt be more moist than inside a house located next to the sea. So if that usage is ok without a coating, this should be as well.
Thanks - soft solder and flux magic on a set of BTS 442 E2 Infineon Technologies' Smart Highside Power Switches. If curious, you can search for an application note describing common use in automotive (& marine apparently) design to switch 12 volt battery loads.
Great fix. Any update on if it worked? I always get leery when people hand you parts in unmarked bags of unknown origin. On top of that, those chips got hot. Id speculate other damage to the nearby components and whatever the heck those chips controlled could potentially have an issue that could cause the problem to occur again.
its really a lot easier than you think. having the correct tools makes a huge difference. experience is secondary. you can find boards in just about any broken electronics to practice desoldering and removing components ¯\_(ツ)_/¯
I used to do some super basic soldering with RC stuff, but only watching this because I find it interesting. The way you clean up low melt solder is so fascinating. Why does the solder stick to the copper braid and not stay on the board?
Just watched a Ferretti promotional video. Location was remote and exotic, basically saying go ahead, enjoy your $xx million dollar yacht and head out to that destination of your dreams... drop auto-anchor, mix up a nice martini and go for a dip in the hot tub with your honey(s)...Just hope that consumer grade mobo does not fail, because there is no redundancy built-in to get you out!
You really think this million dollar yacht is housing it's board where it gets exposed to air instead of a sealed compartment? Besides, he didn't remove any coating before soldering so I don't think it had any to begin with.
@@cleitonfelipe2092 Oh really? Not trying to be a dick or anything but you can clearly see the coating on it in the beginning. That strong smell he was smelling was the coating melting. You cannot solder conformal coating, as this is the nature of soldering. He vaporized the coating with the iron and added new solder. I would have done it the same way. Pretty much all boat PCBs, even those in an enclosure. especially on a Feretti, are conformally coated. The last thing you want is to open the enclosure for service or whatever and have a drop of salt water land on the PCB. I assume he left off the coating so that the customer's technician could test it properly. Probing through the coating is a bitch.
Hope not. My experience with mainboards with EMP/spike type damage is that you get other components that seemed ok at the time of the initial repair failing a few days, weeks or months later. Usually tell them they need to replace the board - if that happens. Insurance companies are surprisingly understanding of this.
I'm a mechanic, we usually just get new or remanufactured modules. Never thought to send a board out for repairs. I'm so used to dealing with the manufacturer and aftermarket that it never crossed my mind. Some are very expensive. Might be worth having repaired. Not to mention that it can take weeks to aquire sometimes.
the biggest issue with a lot of automotive electronics is the presence of potting compounds, conformal coatings (principally for environmental and anti-explosion concerns - keeping the weather out and fire in) and a host of anti-tamper measures generally making them a bear to work on. if you consider the labour required to curcumvent those, diagnose and repair the fault THEN return it to OE standards... is probably why you don't see a lot of refurbished ECU's about, particularly when there's the option of buying them from breakers.
also, from experience trying to repair a potted/coated PCB is the stuff of nightmares, it's really hard work not to do more damage to the board and/or components just removing the stuff.
This is how my brother became successful doing 1 man plant repairs. He could fix things in a couple of days that other service centers would take weeks to do.
@@kaelin000 yep, the conformal coating is a big pain in the ass. Some boards are just dipped in simple varnish(Valeo/Aptive BSI boards), some are coated with silicone(Hirschmann boards in the BMW sharkfin antennas), but the new standard is epoxy resin. The new Valeo windshield wiper motor assys are filled with epoxy resin. The motor housing contains the relay and the electronic board for the timed wiping and the rain sensor. If the relay fails(which are usually do), then you need to replace the whole assembly with the perfectly fine motor and electronics.
Parrts for these sorts of ships are usually one offs and t is a bit hard to find replacement parts for.
It would helpful if manufacturers released service manuals.
You are clearly building a reputation in the PCB Repair circle, where those responsible for 100s of Thousand Dollars worth of Machinery are turning to you for repairs of such items.... To think - just how far you have come in such a short period of time is quite amazing... That RTX 1070 of your's that needed repair during Covid was a God send.
What gpu is an rtx 1070?
@@ahmadomar1-v3t gtx 1070, still a workhorse of a GPU
rtx lol
Those Ferretti yachts cost around $1m a shot, so the owner can probably well afford a ‘super expedited service’ fee :-) The control panel incorporates a wireless link to a pendant controller for the engines and side thrusters which is worn on a lanyard around your neck, so the boat owner can reverse the craft into a tight mooring space while standing away from the helm.
Not that much better than the boat in my back yard. I bet that guy also has problems and isn't all that happy. Oh well...
@@filips7158after talking to multiple boat owners I can happily say I probably will never buy one. Not too interested in the hobby but more power to those who enjoy it🤘🏾.
@@filips7158 Can't spell assume without ass...
Better use logitech bluetooth controller 😅
@@filips7158 just a big hole in the water to throw money into...lol!
Who doesn't love a "money is no object" customer?
If there is any indicator that you are the man, it's when you are sought out by this type of customer.
I hate being that customer...
These are usually the worst people to deal with ... unrealistic expectations and they think you "owe" them when its said and done ... unless the dude didn't actually say that and he's just rich as f*ck
@@johnh1353 -> Ferretti Yacht, just let that SINK :D
Worst customers are the ones that say that, tell you whats wrong with whatever you are working on, and give you the parts.
@@johnh1353 If you agreed to do the job then, yes, you validated the expectations and now do owe it to them.
I've repaired a similar output stage on a board for a nearby farmer's John Deere years ago. The cable leading to a solenoid next to the plow was just shorted to ground because of mechanical damage. The guy fixed the cable and I replaced the failed transistor and I also had to repair the PCB with a bypass wire. As I know, he's still using that tractor on his field. So I think the yacht owner will be also satisfied, as I think, there was a similar problem on the vehicle.
@@DR_1_1 lightning strike is fairly common
Hopefully dude fixed whatever caused those ICs to blow in the first place.. other wise its just gonna happen again
Yeah they did look stinky! A bit of juice came through them
yeah i was thinking the same@theanimalchannel-og9wt
i was thinking the same.
I had exactly the same thought. Why did they blow in the first place?
Maybe he shorted some wires while doing some work. Happened to me once when I mixed up the colors of the wires.
Thanks for fixing my board. Was very pleased
I’m a technician for a certain fast food chain, a lot of our boards are going down on all our equipment and we usually junk the boards and replace (1,100 per board), if you see a big order from your store; you’ll know the request I submitted got approved 👍
I have no idea what you did but i love using electronics as a consumer and i was in awe watching your skills on display. You are the Man!
I haven't done any work like this for a while, am fully equipped tough. And watching you work gives me the itch to get back to it again 😄
aching for lead poisoning, are ya?
@@lolbotswhat?
@@lolbots Don't eat the solder, wash your hands and you will be fine...
Can't get enough of your videos. I could watch full work-day-long videos of your repairs 😂
Yeah Alex should live streaming 😅
i used to work as an Engineer for big electronic contract manufacturer, the ladies that does rework have amazing skills.
Ladies more slender fingers are frequently more useful in such work. ME here that started as an EE, and worked for several companies where electronics & microelectronics utilized women as the primary line workers. Excellent skills those women had.
@@kurtfrancis4621Work center full of Female technicians and Male QA😂
That low melting point solder is so satisfying ❤
"The crooked pad will still make the boat go straight" 💀😂
When you stated the component was fused to the board, I heart sank for the customer. I was glad when you removed the part without incident. Great job, Alex.
Yeah, what an awful day it would be for them not to go out on their multi million dollar yacht lol
@@zqzjlmao
@@zqzj I don't covet or envy someone because they have more money than I. He's just another customer needing a part fixed. I don't care if he's rich.
why he can afford a new board....
@@TermitesRGood1 do you think if he ordered a new board he'd get it within three hours?
It's really special watching a human being reach the highest level of a certain skill and then show their craft to the world. Narrow talent is a just beautiful
love this guys work very smart indeed and i could never understand why people would ever be unhappy with him and his repairs or stuff he just could not fix and he is straight forward with his customers
That's because he also charges for a no-fix.
I like how the channel author manages to avoid the long investigations on the boards and concentrates on the ones where the job is clear. We don't see what's behind the scene ofc but that's actually smart (or so it appears)
It is so good watching an expert like you work
It's truly amazing to witness your capabilities. If we were to establish the concept of UA-cam mentors, I must say, you would undoubtedly stand out as the finest mentor I've ever had. I extend my heartfelt gratitude for the tireless effort you invest in disseminating your extensive knowledge. Your humility is evident, never seeking self-aggrandizement or anything in return.
My wife and I firmly believe in the power of spreading positive influence, whether it pertains to refining social skills or, in your case, generously sharing years of experience and wisdom. I may not have an exact grasp of the duration you've been engaged in this noble endeavor, but I am acutely aware that the process of accumulating such a wealth of knowledge would demand a significant investment of time-potentially up to two decades-if I were to tread that path independently.
Thank you for making a profound impact, one that transcends cultural boundaries and languages.
a quick trip in the superyacht would have been a good reward for that awesome job !
I really enjoy these soldering videos. I attempted to teach myself soldering (this was years before the public internet) for plumbing pipes and also electronics. I did buy a few very good books that coverred soldering. Anyway, all I did was make a big mess, I just gave up after a few attempts because I didn't have an actual project I needed to get done.
Loved the video Alex. "Where is solder when you need it". Yep. Not on the iron, that's for sure.
Thanks for picking up where Rossman left off. Stellar job!
What i would like to see, if the customer agrees of course, is that when you fix a board like this which you cant test. That the person who brought it in makes a short vid of it actually working in the vehicle or device they put it into.. Not sure how this would work but there might be customers up for it as they probably heard of you through word of mouth or youtube. (maybe give them a small discount)
Super idea, especially this one.
I must also admit, id love to see which yacht this board ends up in. Would love a mini video of them installing it back onto the yacht tbh xD
These people don't film for discount
Somebody has a date with their mistress tomorrow!
Really enjoy your instructional videos!
OK so delicate second-stage physical repair. It's the fault-finding I find interesting. My lesson from this is about using low-melt solder to help desolder.
I thought that was a new board until I realised you managed to reseat that crooked tab, wow! Great work!
I hope the customer orders genuine versions of those components from a reputable supplier to have on hand in case the knockoff ones fail, for the next repair. But they may not even know that ordering something with the same number from Ama*** is not the same as ordering it from Digikey/Mouser/whatever.
The box they were in was labeled kinda sketch.
The only thing I understood was it was a Ferretti motherboard. The rest was totally incomprehensible to a non-techie, but the video was absolutely fascinating. The skill and precision it takes to repair these components is amazing.
this is the "explain in fortnite terms" trend, but nice haha
youre doing all work for that guy from now on ....awesome work brother hell see it like night and day ..congrats on the new client
About the only time in life you'd be happy paying premium for three hours and only getting 16 minutes :D Enjoyed seeing something a bit bigger, and the challenges that brought. Wouldn't have thought to snip the pins, I'll remember that. Nice.
In the marine business, money talks. Anything associated with the ocean cost two times more than on land.
Thanks for the video Alex.
And three (or more) times airborne!
@@MiGujack3 *Ha, ha! So right!*
5x!!!!$$$$$😂😂😂
When soldering tabs on the power supply, you must make sure that the TAB is fully soldered to the pad on the PCB. This both for conductivity and for heat transfer. A little dab of solder paste on the PAD should do the trick as capillary action can not be counted on with such heat slugs.
Now about the engineer who designed the board. Those parts are severely under heat sinked for the size loads that the part is designed for. The engineer may have made the right calculations if the load may be significantly less than the part is capable of.
That's what the hot air tool was for. With the flux under the thermal pad, the solder would have wicked along the entire length of the metal interface.
I have little to no idea what I am looking at during certain times of the video, but I thoroughly enjoy this type of content by you. 10/10 as always!
I have been fixing my own electronics for years. Didn't realize I could turn it into a job. That's awesome. Cool video.
Bro I run a super small marine electronics company out of New orleans, I'm always pulling broken gear off of vessels. If you ever want an old radar system, transducer depth system or old marine display to have for a repair video for free to keep and play with let me know I'll save you the next one I pull off.
What about a quick test measurement on an obvious short that may has caused the issue? Maybe ist only a shorted cap or something...
You only do what the customer requests, anything else is folly.
@@Paperghost Ooo we a have a half ass'r in the comments...
@VashStarwind without schematics you'd just be guessing. Hopefully a boat tech that can get a board repaired can also understand wider electronics repair on the other boat equipment that probably caused this failure.
Short didn't cause that. Reversed polarity caused it.
If the customer is requesting to change specific components then it is assumed that the customer knows what the issue is and your job is to change the components as requested. 🤷♂️ That’s what they’re paying. Not for diagnosis.
Ship ahoy! Anchors away! Splice the main sail, and so on! Blimey! How long before NASA come calling on Alex to remotely fix the wandering rover on the planet Mars? Awesome Alex!
Another nice job Alex. Hopefully the circuit on that 3rd pad from the left that was damaged was still making a connection.
I usually go over a lot of my boards w/ 99% iso --- and a soft toothbrush.
I find that it does a much better job than a q-tip/swab
You know they're paying Alex a boat load of money when he holds the board up very carefully with shaky hands haha. But serious chat, you do amazing work and the pun was definitely intended.
100%. I asked everyone to stay at least 100ft away from me while working on the board.
A yacht load of money
@@NorthridgeFix man all those ribbon cables hanging off made me nervous.
Mind playing tricks, when Alex first used hot air and mentioned the smell it's like I could literally smell it. If you know you know! You just don't forget that charred board smell! It's no telling what that control board cost💲
Nice work!
1million apparently it controls nearly all motor and thrust ect on a super yacht
It's lucky the customer has tested the drivers and bias components before supplying only the output devices. I'd expect a cascade failure when there's that much destruction. I guess they were going to test it back on the yacht and find out if they had fixed the over-current situation
that's clean. and money was no object. *and* customer provided the parts. how awesome was that? that's awesome, *that's* how awesome that was. that was an extra weeks worth of vacation is how awesome that was. that's why you got into this business, is how awesome that was.
Nice job! I thought there was going to be a torn pad or two as burn't as it looked. Low melt solder is awesome as is your skills.
Flux and low melt solder have been my friends. Nice repair.
Wow. so that was amazing. thank you. I burnt my board soldering an electrical tester. it was our final exam in soldering course as part of electronics core. that was over 20 yrs ago. fun video. brings back memories of school.
Marine boards are conformal coated. That bad smell was weeks ticking off of your life. Hope you're in a well ventilated place.
prolly not....with $ 1000's on the line and hours to repair, common sence health and fans take a second place
You are very professional and a good teacher. Kind regards.
Those BTS442e2 are SMART high side switches with overload over heat over current and all sorts of protection .none of which worked.
Beautifully done. Hats off to you buddy!
The parts that you have been replaced looks like switching some high current motor or something else so if the parts burn like that probably new parts will burn again owner has to be carrefull about that.the job was easy for Alex he did well what the customer needs well done
Yeah looks like he has a motor with all three windings shorted from the damage to those triacs
You would hope the owner knows exactly what he switched on that burnt out the board and has replaced it. Maybe it was a freak accident like a motor stalled by a rope tangle or something.
"A crooked pad will still make the boat go straight" ... philosophical stuff right there
This is the only channel on UA-cam that can turn chicken shit into chicken soup! Excellent work! It really is better than factory.
Is the customer aware that changing the components doesn;t mean that the problem is solved? :P :P :P
The customer could be an expert on those parts for all you know. Maybe they accidently shorted something and don't have soldering skills.
They just needed someone who could take the parts and put them on fast.
@@leonkernanno, such an expert would have the soldering skills.
The customer mentioned something about replacing a battery that caused this damage. They were very specific on what needed to be done.
Those are output MOSFETs, more than likely they know what they did on the output to cook them. And, probably not the first time.
@@southerncharity7928 No, being able to diagnose something doesn't mean you have the skills to do component replacement, nor the equipment, time, space etc....
Very professional looking finish. I am impressed. Job very well done. Camera work excellent as is the audio.
Alex sir so happy to work on the big boards got rid of repairs on those regular smd's for a while😊
20 years ago we had a rare old cnc machine Mobo go out. Only one was sourced in Israel, so a (un) lucky employee with a passport got to fly to Israel, get handed a Mobo box , and get back on a plane for return...as I recall, it was $8000 for the trip and fees. and another $10,000 for board. Production line was $38,000 an hour lost revenue.
When our lasers went out , a service man from AUSTRALIA would fly out ASAP overnight and stay till job was done , then go back to OZ. Now we have you to call! Nice.
I repair tube amplifiers from the late 1940's through 80's and I would love to transition to this someday as I turn down work on all modern, double sided PCB amps. I learn a lot from watching you, thank you.
I’m sure you will find many of the newer modelling amps are multilayer boards, with loads of via holes to cause issue. Even in the early 2000’s some consumer HiFi’s had 5 layer boards.
While Northridge Fix's content is fantastic for component level repair, also checkout Barevids amplifier repairs (also youtube channel); he is UK based and does in car audio amplifier work that I assume is transferrable to other amplifiers - his repairs often include the troubleshooting process of the different sections of D class amps.
See, to me, those old tube amps are a lot more complicated than a modern PCB. Most of the time all the components are just soldered to each other in line, and stuffed into a box. I always figure it out eventually, but it sure would help if everything were nicely fastened to a board.
There's no way that the board didn't suffer more damage with those kind of burnt components. But I would guess that was the very first thing that was told to the customer. So the customer gets what the customer requests, if he's willing to pay.
When I was in the Army I was a 27E, one of the only MOS at the time that repaired its own test equipment. I worked on Dragon, Tow, Javelin launcher's and trackers. I could repair a lot of the equipment and yet there was still stuff I sent to be repaired by civilians. This is what I imagine the civilians did.
I wish I had customers that bring the needed components themselves and say "money is no object". That's a good life...
Low-melt solder is nice. I have used low-melt solder from NRF.
Well done ❤.. its been 3 year watching your vedios ❤😊 all are very informative 👏
Your soldering skills are excellent. My soldering skills suck.
I met Alex a few months ago for my wife’s soaked macbook. We had an educational conversation about why my Crapple phone sucks and why Samsung phones rules. I now own 2 Samsung phones. Hope the house hunting works in your favor!
From the title alone i already knew what would be said
"Money is no issue get it done today"
Words from the owner and crews and maintenance people of every yacht ever - i deal with them quite often in my trade, and have pulled some impressive hail mary's to get things done. I also take tips 🙂
That said half the time they want pure unobtainium from a small country across the globe NDA'd and its wild.
I hope he takes the Northridge Family on a day out on the Yacht after this super service.
Would you apply a conformal coat to keep out the moisture ? I would imagine that would be important in a marine environment.
May not be necessary as it probably is in a watertight box anyway
I used to design some electronics for a containership company.
I spoke with these guys what theire experience was with this matter.
They said that either you do nothing, not even seal the electronis or clousure so that there is plenty of ventilation, or you have to seal it of so incredible well that in the future repairs will be impossible. Half solutions will cause moisture build up and you be worse off then doing nothing.
These ships would offcourse sail from the north to the tropics.
@@chantalslut I wonder if sticking a decrescent pack inside the enclosure will help keep moisture down. I am sure this is not a common problem.
I dont know much about the if the moist air with salt affects electronics in such a negative way, but what I can say is that there will be no liquid water on the parts and the air shouldnt be more moist than inside a house located next to the sea. So if that usage is ok without a coating, this should be as well.
Simply amazing, your skills make it look so easy.
Great stuff ! would be nice with feedback from customers. 👍
Looks like an old engine control board. Very antiquated. I work on these boats every day and haven't seen one that old. Probably early 2000's.
These are why I love your videos, never know what your going to get 😂
15:09 solid moment
Solid... Solid . Solid... Solid.. super solid..
A board repair on a connected ribbon cable you sir are a pro.
You’re doing great , I’m getting there myself .
Words of wisdom "A crooked pad will still make the boat go straight" 😂🤣
Very dicey! More power to you for doing this repair. I would have refused it. Any other failed components?
He's smiling a lot, cuz he knows he'll get a lot of money ;)
I wonder what caused the heat damage in the first place, was it just the customer battling to remove those already faulty components?
Thanks - soft solder and flux magic on a set of BTS 442 E2 Infineon Technologies' Smart Highside Power Switches. If curious, you can search for an application note describing common use in automotive (& marine apparently) design to switch 12 volt battery loads.
well done, cant wait to get some stuff form your online store
Great fix. Any update on if it worked? I always get leery when people hand you parts in unmarked bags of unknown origin. On top of that, those chips got hot. Id speculate other damage to the nearby components and whatever the heck those chips controlled could potentially have an issue that could cause the problem to occur again.
You make it look so easy.
its really a lot easier than you think. having the correct tools makes a huge difference. experience is secondary. you can find boards in just about any broken electronics to practice desoldering and removing components ¯\_(ツ)_/¯
That electronic microscope will save a lot of eye strain !! 🙂
I used to do some super basic soldering with RC stuff, but only watching this because I find it interesting. The way you clean up low melt solder is so fascinating. Why does the solder stick to the copper braid and not stay on the board?
It's called capillary action. It's because of the surface tension of the solder. It's the same reason oil moves up a lamp wick.
Just watched a Ferretti promotional video. Location was remote and exotic, basically saying go ahead, enjoy your $xx million dollar yacht and head out to that destination of your dreams... drop auto-anchor, mix up a nice martini and go for a dip in the hot tub with your honey(s)...Just hope that consumer grade mobo does not fail, because there is no redundancy built-in to get you out!
Those are the best jobs where the customer diagnosis the problem and even brings the parts. If it doesn't work, not your problem.
I wonder what the charge for repair was... urgent same day with "no bill is too high" mentality just curious.
What caused the catastrophic failure? Whats stopping it from failing again in the same way?
You’r a real Artist 🙏
Endlessly fascinating to watch this! You've inspired me to take an electronics class!
The power of using lemon soldiers! Wow!
If you didn't add a new layer of conformal coating at the end u should ask the customer to do it, boat stuff gets wet.
Absolutely agree! Salt water is even much worse for electronics than ordinary water. Even the air on a yacht in sea water can cause corrsion...
You really think this million dollar yacht is housing it's board where it gets exposed to air instead of a sealed compartment?
Besides, he didn't remove any coating before soldering so I don't think it had any to begin with.
There was none. Maybe work on your spelling and punctuation instead of telling others how do do their job wrong.
@@cleitonfelipe2092bingo
@@cleitonfelipe2092 Oh really? Not trying to be a dick or anything but you can clearly see the coating on it in the beginning. That strong smell he was smelling was the coating melting. You cannot solder conformal coating, as this is the nature of soldering. He vaporized the coating with the iron and added new solder. I would have done it the same way.
Pretty much all boat PCBs, even those in an enclosure. especially on a Feretti, are conformally coated. The last thing you want is to open the enclosure for service or whatever and have a drop of salt water land on the PCB.
I assume he left off the coating so that the customer's technician could test it properly. Probing through the coating is a bitch.
Beautiful to watch you work....
Nice work, as always! I wonder what happened to that board. Would a short circuit cause that kind of damage? Lightning strike?
My thought was lightning strike
Hope not. My experience with mainboards with EMP/spike type damage is that you get other components that seemed ok at the time of the initial repair failing a few days, weeks or months later. Usually tell them they need to replace the board - if that happens. Insurance companies are surprisingly understanding of this.
A crooked pad will still make the boat go straight😂
Something about it looks so pretty too me - with the solder and the flux and the flow - LoL !!
I've found that flux is conductive so it's essential to get it completely removed
I use boxes and boxes of Kim Wipes at all of my customer sites. They are the best.