by the way I am a 3D printer parts manufacturing factory. Mechanical designer of extruder. Any improvements to the 3D printer extruder hope that users can interact and communicate.
Awesome video man, the manual hand drill is definitely my favourite, but all very useful items. Just need to get my hands on a 3D printer and computer.😎
I just have a question - for the water pump, do you need something to secure the motor to the fan blade ? Because it looked like the motor could move in and out. I look forward to making my own btw.
Printing profiles will change dependant on what's being printed and what is being printed with. Your better off learning what the settings do. There is a plugin for cura that explains what each setting is, in detail. If you click on the c marketplace icon, next to your profile picture in Cura, you'll be taken to the list of available plugins. It's listed at the top, under premium, it doesn't cost anything.
@@3DPrintsBuilds Many thanks for this answer and this tips, so I have to configure this in cura or prusa sw and link to the camera, or directly in the marlin firmware?
fascinating the way you shoot so that the printer seems to be stationary which method you use. can you make a video or give me directions on how to do it?
Merhaba, yazıcının tablsına yapıştırdığın bant kağıt bant mı? Bende ender3v2 var tablaya doğru düzgün yapışmıyor bazen baskının yarısında falan kenarları kalkıyor senin gibi bant yapsam düzelir mi acaba? Videolar çok güzel olmuş eline sağlık.
Hello, is the tape paper tape you stick to the printer's table? I have rare3v2, it does not stick properly to the tray, sometimes its edges are removed in half of the print or something. If I make a tape like you, will it improve? The videos are very good.
How the hell does one do the timelapse with the printhead at the home position, is that done in the gcode after each layer does it home and then take the snapshot?
try using tree supports you will probably save material (btw if you have a reason for using regular supports let me know cause i kinda want to make cool timelapses as well but in general tree supports are way better than regular supports) btw amazing video man
Your item number 5 could have a hex opening with a small magnet glued inside. Make the opening a little fatter. No need for the thread or the nut. Cheers.
pity he chopped off the useful end too ... just had to slot his handle and no cutting needed ... tbh ... a hex key is made with its handle .. so a new one is never really needed ... and it works in tight places and open places as bought from the store ...
for the box cutter could you buy coated blades that fit in the case and for the temple tool,is there a way to allow each piece to come up but have then on a bar on top?
@@TiaDzn PLA is not toxic to print, but if you like to print something, which directly in contact with food, its recommended to use other filaments like PETG. Because PLA melting temp is lower and you cant use hot water to washes these things and 3d printed surfaces can collect bacteria easily. PLA material(not 3d filament) is used to make disposable packaging and also for medical implants. You can google it and find out more info.
That 3d printed scraper is going to fail really fast. The one I printed was falling apart after one use. 3d printed tools are not strong enough for any real use.
@@3DPrintsBuilds My point is, the music is so LOUD it's hard to comprehend the voice. There's a HUGE royalty free music industry now thanks to UA-cam !
many useful creations
Allen Key Handles....saves my fingers from painful acupuncture. Thank you.
Was that a model of a brake pad? Cute.
Yes it is brake pad model. It's one piece of my 3D printed wheel and brake system kit. Video link: ua-cam.com/video/QeqBxDsUiKk/v-deo.html
So smooth prints on the Z axis, that's amazing!!!
Haven[t managed to get that out of my Ender yet
Yeah he's got that thing hella tuned. Damned impressive.
Very good application case recommendation and application.
great
by the way
I am a 3D printer parts manufacturing factory. Mechanical designer of extruder.
Any improvements to the 3D printer extruder hope that users can interact and communicate.
Vise is cute & useful as well
your timelapses look better and better, keep it up
Thanks!
Awesome video man, the manual hand drill is definitely my favourite, but all very useful items. Just need to get my hands on a 3D printer and computer.😎
Thanks!
@Moon Doritos ok.
Love the 3D printed screwdriver
Super cool.
I just have a question - for the water pump, do you need something to secure the motor to the fan blade ? Because it looked like the motor could move in and out. I look forward to making my own btw.
You can use glue.
Exelent vídeo! Can u share your printing profile?
Printing profiles will change dependant on what's being printed and what is being printed with. Your better off learning what the settings do. There is a plugin for cura that explains what each setting is, in detail. If you click on the c marketplace icon, next to your profile picture in Cura, you'll be taken to the list of available plugins. It's listed at the top, under premium, it doesn't cost anything.
8. and 9. and the sanding paper holders is amazing and very useful.
Where do I find Ice or snow to use the ice scraper??
Where there is snow 🙄 go to siberia theres some snow. Dont come to finland 😳 its our snow
@@jerrylindstrom3323 😪😪
Number 8 is my favorite.
your prints are really beautiful! Which filament do you use?
PLA, different brands.
Great idea's thanks
Nice Video like always!
Thanks!
Really cool compilation!
Thanks!
Nice print quality! 👍🏻
Thanks!
Hi friend, great tools... what is the name of the tape you put on the ender's table?
I print on plain glass and tape(masking tape) is under the glass.
Just one question, how do you do to create a video of 3d printing without seeing the head?
After every layer the hotend moves away from the print and the picture is taken.
@@3DPrintsBuilds Many thanks for this answer and this tips, so I have to configure this in cura or prusa sw and link to the camera, or directly in the marlin firmware?
Very nice 3d tools i am abbo . Lg swiss man Rolf
Excellent 3d print tools.
fascinating the way you shoot so that the printer seems to be stationary which method you use. can you make a video or give me directions on how to do it?
Octoprint does that
I just got a Mars 3 would I be able to make these on a resin printer and would they be functional if so??
I haven't tried it myself, but I think you can.
what sliсer you used? very interesting fill draw
I use Ultimaker Cura
what filament do you use and what temperature?
I mostly use PLA 210-215°C and PETG 235-240°C
what are those sheets you put on the bed of the printer?
I use plain glass on the bed and under the glass is masking tape.
Merhaba, yazıcının tablsına yapıştırdığın bant kağıt bant mı?
Bende ender3v2 var tablaya doğru düzgün yapışmıyor bazen baskının yarısında falan kenarları kalkıyor senin gibi bant yapsam düzelir mi acaba?
Videolar çok güzel olmuş eline sağlık.
Hello, is the tape paper tape you stick to the printer's table?
I have rare3v2, it does not stick properly to the tray, sometimes its edges are removed in half of the print or something. If I make a tape like you, will it improve?
The videos are very good.
3 numara saç spreyi kullan ben öyle yapıyorum
Can you tell me which filament is best for strength wise i would like print some pdr dent kits
Nylon or asa filament
Great Video I like it!!!
Thanks!
Vc poderia desponibilizar este arquivo e eu comprei uma 3d para mim mas ainda não sei mexer direito para fazer os projetos para imprimir
How the hell does one do the timelapse with the printhead at the home position, is that done in the gcode after each layer does it home and then take the snapshot?
Yes
try using tree supports you will probably save material (btw if you have a reason for using regular supports let me know cause i kinda want to make cool timelapses as well but in general tree supports are way better than regular supports)
btw amazing video man
Why did you cut the Allen Keys if you could do the hole bigger and could still Use the hole key?
But overall amazing designes.
mini Vise is the best one
How do you do a time-lapse video without the machine in the way the entire time? I've been recording my builds but the machine is always in the way
Your item number 5 could have a hex opening with a small magnet glued inside. Make the opening a little fatter. No need for the thread or the nut.
Cheers.
pity he chopped off the useful end too ... just had to slot his handle and no cutting needed ... tbh ... a hex key is made with its handle .. so a new one is never really needed ... and it works in tight places and open places as bought from the store ...
por que no pones los enlaces de los modelos para poder compartirlos.
All models files are in the description.
wonderful video, amazing quality prints.
Thanks!
for the box cutter could you buy coated blades that fit in the case and for the temple tool,is there a way to allow each piece to come up but have then on a bar on top?
Awesome👍👍
which material is this? pla?
I used mostly pla, but you can use stronger material like petg or abs.
@@3DPrintsBuilds is pla toxic to print? sorry but I’m a newbie!
@@TiaDzn PLA is not toxic to print, but if you like to print something, which directly in contact with food, its recommended to use other filaments like PETG. Because PLA melting temp is lower and you cant use hot water to washes these things and 3d printed surfaces can collect bacteria easily. PLA material(not 3d filament) is used to make disposable packaging and also for medical implants. You can google it and find out more info.
Really nice video !
Thanks!
Печать ради печати. Все это можно купить магазине.
К монтажу видео претензий нет - сделано отлично.
cool~
Hi! How do you do such time-lapse?? Please tell me
He sets up the print head to return to the corner after finishing each layer, and then the camera takes a photo. I think.
With octoprint and great camera
pump needs an o ring or it will get wet and short out. And the music made me mute.
U don't like to party
Wera wants their style back.
geat idea , great tools !
👍👍👍
That 3d printed scraper is going to fail really fast. The one I printed was falling apart after one use. 3d printed tools are not strong enough for any real use.
Or just know the tools you are using and their limitations. I wouldn't use a twig as a cane.
@@laughatchaos right.
The water pump should be much bigger
Genial tu video… lastima UA-cam Un anuncio cinco segundos antes de terminar el video…. Desvirtuado youtube
Boa noite
Who wants to tell him the purpose of the right angle on the allen keys lol
🔥❤👍
Where the hell are my time stamps
Found it
2:00 is kinda sus
manual hand drill: for the person with a 3d printer but no drill 😂
awsome
Thanks!
😀👍
Drill need some lubricant
The music! Why???
Без платный пластик.
Like it.
Who else saw the ice scraper and went “Nope, too short”
I want buy 3D Printer Machine but so Expensive
can you try n fnd some annoying music for the next vid?
Looks like you mixed up word endings full and less.
Rule #1: Never 3D-print what you can easily buy.
At least never design unless you improve it...
The music is way to loud and awful! Great video otherwise. 😉
Thanks! The music is already turned down by 50% , next time I will turn it down more and try to find better music.
@@3DPrintsBuilds great channel by the way very useful. 😁
I just subscribed buddy. ☺️
@@lookuptv6755 Thanks again! :)
Why do these videos always have such HORRENDOUS music ??
It's difficult to find good music, which is copyright free. You can always recommend some good background music.
@@3DPrintsBuilds My point is, the music is so LOUD it's hard to comprehend the voice.
There's a HUGE royalty free music industry now thanks to UA-cam !
que pedo como se harma
The music is really annoying!
Насос полная шляпа.
Все это похоже на китайские дерьмовые игрушки.
A lot of useless prints
if i didnt have the option to mute this video, i wouldnt watch it. js. sns. love the content tho.