Bosch DIY Hole Saw Kit
Вставка
- Опубліковано 11 гру 2019
- This kit got mediocre reviews on Lowes.com, It doesnt make the most precise cut but for the light DIY person it might be something to look into. www.lowes.com/pd/Bosch-8-Piec...
Visit our website - www.toolsinaction.com
Instagram - / toolsinaction
Check us out on Facebook - / toolsinaction
Get Tools in Action Gear - www.tiagear.com - Навчання та стиль
Super old school design, I remember my dad had these from Craftsmen back in the 70s. Throwback DIY stuff.
Dude my dad has had one of these for 30yrs
Andrew & Mattie Walter
Yes exactly, really good one and space saving. tools guys aren’t up to date 😳
Same here... at least 30 years old. I think it is still in the basement some place. Everyone pretty much stopped using them in favor of the dedicated individual hole saws and these guys act like they've just discovered fire. What's next... :-)
I've got one too that was buried in my dad's toolbox. I didn't realize that the blades came out and tried making the one size hole with all of the blades mounted. I thought the drill was too weak. It's kinda like a uni-bit hole saw.
I had one 30 years Ago ! But I like the Arbor hole Saws Better .
Just found one of these, maybe 50 years old, in a dark dank corner of my Dad's shed and gave it a try. I now know why it was relegated to the dark dank corner of the shed. Not sure how this thing ever made it into production. The cheap Chinese adjustable circle cutter (fly cutter), whirly gig dispenser of emergency room trips, that I bought out of curiosity works ten times better. Maybe it's time to invest in a good set of hole saws.
Surprised you haven't seen them before. They've been available here in the UK from several manufacturers for as long as I can remember and I presume they're not new over there. Tip: lightly oil them before each use as they can get super hot (because each inch of diameter x each 1,000 rpm = 36mph). Oil won't stop the cutting edge getting hot but it will help to make the temperature change through the whole blade more gradual and thus avoid metal fatigue... these things are quite springy and if a big one lets go at 3,000+ rpm you may end the day with fewer fingers than you woke up with. If your drill has variable speed, use the slowest speed that works for the particular job.
That's slick for the compact size for an 8 bit kit, compared to the MONSTER BOXES for side by side storage. Plus that ease of the plug removal..... practically fell out on its own compared to even the jagged leverage design hole saws.
It's Bosch, there's gonna be far more than 6 holes and done, it'll last a long while
I have seen a kit like this before. Not a new thing however I thing they redesigned and for the price, a must have for the tool bag!
Just got one of these and didn't know how to set it up. Thanks guys
Hi These have been available in Australia for decades but they are definitely a DIY thing. But if you need a hole that size and you dont have a real one of the right size they are OK
Just bought an older set like this. Mine is different from your's in that each blade has 2 holes (opp each other)at the bottom & 2 holes through edge of blue part where you insert a pin to lock each blade down. Also there's a spring under drill bit to help push core out.
I just used the one that had been in our garage for over 50 years ... it worked ... time to put it back on the peg board ...
There not bad for I would definitely add one of these to my tool chest, I still have the Bosch set you guys hooked me up with years ago which are badass by the way! Thanks for the video guys keepem comin! TIA#1!!
Thanks brother
I bought one of those back in the 80s. Don't remember the brand but it was cheap. Still have it and it works fine. Not meant for a two by four.
My favourite new tool. I'm putting holes in everything 😁
After I saw your video before blackfriday, I picked it up for $11, brought it to work,i found (the smaller sizes are more Wobbly when starting, the bigger ones are a little easier but) they only lasted a few holes. For a guy who needs a few holes or few different size hole it can be a life saver!
Exactly
These are so old. I have some that my grandfather bought way back when.
My dad had this exact thing in the 70s. It's mine now!
The reason why it bind up is because when you stop it and start to cut again the teeth lock into the wood. You got to back it out first
The spyder hole saw kit with the core ejection is the best hole saw I've used bar none.
Yes, those rock!
That is a very old design. Can find them all over the internet and run into them often at auctions and estate sales. They are Spring steel multi hole saws. I have a couple missing some blades that are different cut depths. I wouldn't waste the money the dont stay sharp long at all.
What is the maximum diameter of such a nozzle Hole Saw? I need to drill a hole with a diameter of 20-25 cm, is it possible?
Best tool channel. Enjoy your videos cut a hole with all seven on there at once
For the guy that maybe changes out a door once every few years or has to do some plumbing repair, this is the perfect kit.
Yes it did look wobbly! I guess it’s the open side as you said! Interesting concept, seems quick though?
I find it useful to drill a pilot hole first - slightly smaller than the pilot bit on the actual kit. This helps to get you going straight right from the start. A large diameter hole saw at high revs is going to generate a significant amount of torque, which is another reason for not using large ones at high speed on a hand held drill without a stabilising handle.
Professional wood holder!!
I have had one of those from maybe back in the 60's and never used it. They look like a tool from the dollar store.
Good video. Thankyou
they drill better if you do an outline with the blade first and you put a series of drill holes around perimeter then drill
I allows the dust somewhere to go
LOL, That was me Dan asking about Eric's house. I had to laugh when you told me all he got done this month was gutters. And Dan ...No means No. #TIACREW
Sweet!
The plug and bit are super hot because you guys need to pull out and let the chips loose a few times while doing a hole.. you are just packing them in there... and these things have been around for 30 years..
Had one of these in 1970. You held the blades in with a set screw.
I’ve got one that has 7 blades but cannot figure out how to remove the outer blades so I can use the 1”. I broke one try to get it out. Ridiculous
Mine isn't Bosch but it looks very similar to the kit in the video. With mine you twist anti-clockwise to remove. Wear heavy gloves though as it's easiest if you place your hand over the cutting edge.
Guys, you only have to take the outher layers of till you get the desired diameter
They also work better in a drill press.
those are old as the hills in UK
Don't get me wrong- I'm a huge fan of Bosch tools, but after buying this kit i returned it after attempting one hole. The hole saw wobbled so bad that it caused the pilot bit to fail by bending. Alot of corners cut in this disappointing product. I know Bosch can offer much higher quality DIY Tools and accessories. Nice review though 👍
They have their uses. I've used them many times on things like chipboard, mdf and vinyl flooring. As noted earlier you just have to watch out for the speed/heat... a 4" diameter at 3,000 rpm is over 400mph and that's too much for a light duty DIY product.
A pair of Dorks, not Pro's. That multui Hole saw gadget is one of the oldest tools in my toolbox, from the 1980's.
It’s a really great way to get a bunch of holes was sizes
buy them only to find out it's just easier to get the real deal later on.
My father had 1 since 80s
The bigger diameter blade is going to take more power to drive than the smaller ones.Cheers from here!
Yes, My Father also had the Craftsman version in the 60s. It was a piece of crap.
I can't get my blade off
Wow , these guys are totally stranger to safety XD
I wonder how they've managed to keep their fingers on !
I would get laughed at if I took one of those on site
nooice
Safety last
You guys need to get out more.
NICE EYE PROTECTION!!!!
When I see people not using eye protection I know they are not PROFESSIONALS.
SAFETY STARTS WITH THE LETTER "S" BUT IT BEGINS WITH YOU...............
YOUR MOST IMPORTANT SENSE IS YOUR EYES....AT LEAST PROTECT THAT ONE IF YOU LIKE looking at GIRLS or reading or driving or watching TV..................
If you cut your fingers off at least you can still do the above things.
Great for cutting the core out of a cabbage.
Try one from Metabo its much better 👍
I misread that... thought you said Meccano! 😄
I still have one from 1969 or so.
wow I did not know it was that old.
Guys.....cars....check them out!
They have 4 wheels!
Those have been around forever nothing new
wow harbor freight has the same crap
What? How are those a new concept for you? Have you been living under a rock for the last 30 years?
Anyway, you didn't miss much. Dimensions and center point precision on those are garbage. And depending on the manufacturer blades can get dull before finishing their first hole.
Bought this....junk!! Bosch should have stuck to speakers....these blades are twist lock and COMPLETELY out of round because they are not secure!! Didn’t finish one hole and back they went!
“What ever no is in Spanish....”. Lol. It is no.
This probably as old as you guys. Nothing new at all. I have used up 3 of these of various brands since the 1980's.
its very old school I have a Corsair 7 size. dont forget what makes the difference between a carpenter and a great carpenter. a great one knows how to hide the mistakes. or his/her name is Jesus. lol
I got one and it almost broke my fuck1ng wrist
Don't buy this!!!! Not even worth the $15 bucks I spent on it. To be honest, I didn't expect much based on the money I spent. bit shank snapped after only 5 uses. Blade inserts are flimsy and bend easily.
That is not new. Mine is about 30 years old.
You guys sound like a couple of rookies.
Well we are professional amateurs!
That crap is so old!!!
The guy in the red does not seem very smart
A sphincter says what?
No in Spanish is No lol
This looks like a peice of shit.
Getting out the cores in normal holesaws aren't that tough either.
Bad publicity
that saw design is old and its junk and kill drills!!!!!!!!!
i wouldnt use it for somthing thicher then 1 single plywood,
Junk!!!
THAT IS AN UNSAFE TOOL...
UNSAFE MOUNT.
These new age hole saws are crap.For heavens sake stick to the old round hole saw bits .They make much better holes.
They're hardly "new age". They've been around for as long as I can remember and I'm a grandad.
Don't waste your money on this dangerous piece of crap. It's cheap for a reason.