Carbon Steel Metal Alloys Wood Hole Saw Cutting Set || Unboxing and Usage
Вставка
- Опубліковано 26 тра 2020
- POWER & HAND TOOLS - CARBON STEEL METAL ALLOYS, WOOD, PLASTIC HOLE SAW CUTTING SET
11 PCS HOLE SAW KIT CIRCLE WOOD / TIMBER CUTTER ROUND PLASTER HOLE SAW (19-64mm)
Hello friends, In this video, I have unboxed hole saw kit and explained how to use with drill machine step by step.
-----------------------------------------------------
BUYING LINK: amzn.to/3lft8EU
-----------------------------------------------------
DISCLAIMER:-
NEVER OPERATE THIS MACHINE(Drill Machine) UNLESS SAFEGUARDS ARE IN PLACE
Material:- Carbon Steel
In Package:-
- 8 hole saw cutter (19-64mm)
- Mandrel
- Drive plate
- 2.5mm Allen key
Feature:-
Suitable for cutting wood, thin sheet metal, plastic and thin alloys.
#holesawset
#holesawcuttingset
#drillingholesaw
#holesawtools
Channel link:-
/ kissanhomeengineering
Facebook page:-
/ kissanhomeengineering
LIKE | | SHARE | | COMMENT | | SUBSCRIBE - Навчання та стиль
Finally, my cardboard cutting woes are solved.
Thanks for clearly demonstrating how to unite the pieces. The larger assembly of my own set was jammed and I hadn't wanted to lean on it harder to make it unscrew (as it seemed engineered to do) in case it broke. So you relieved me of that ta and also helped me twig to the interchangeability of the drill.
Thank you. Almost one year back I purchased this machine, but not knowing how to assembled it. After watching demonstration, I am relaxed. Thanks.
The whole point of the drill bit is that you do half on one side and half on the other side, since you see the hole made by the bit on the other side. That way the wood would not be burned.
Thanks for suggestion
Thx so much for this video!
it s been so helpful thanks much
Can we make hole in glass by this drill bit. I purchased this one so I want to know.
You have to use sponge with water to protect the wood from burning
Very good
useful video
use some water to cool them off and use slower RPMs
I don't get 1 inch size, what to do?
I have a set of theses and like said,drill half then flop and drill other half,if you try all the way on a 2x4 it heats up,burns wood and gets stuck,tried it to see and bingo it’s not made for straight through,half and half,lol
mine is so hard to put
The wood is almost burning. You should slow a bit the spinning
Bahut badhiya
Wat Price tis
how well these can cut on metals
Only thin sheets of iron can be cut.
Mainly suitable for plastic, rubber and wood.
ok..thnx
You are driving the drill speed to the maximum, use a slower speed on the drill and the wood wouldn't burn. If you use that speed using a using a hole-saw for metal on metal you will destroy even the costliest premium hole-saw available in the market . .
Can I use it in Bosch 500 re drill.
Yeah
Kitne ₹₹ ki li bhaie ??
Kulang pang lock sa dalawang buyas
I tried to use on bamboo and plywood but it just wouldn't stand. It would keep going sideways. Any help how to hold it on one place?
i m having the same issue, the bit wouldnt stand on the spot and it keeps rotating the entire stuface, how did you fix this issue
price please tell me
where is get this product bro????
Amajon/Flipcart Online Shopee .
smoking the hell out of those bits........they dull ??
What is safe guard.please reply for farther subcribtion
Hand gloves
Goggles etc.
Does it work on metal?
No
Please take notice,all materials either soft or very thin,lol
You canTalk too.
2.5mm allen screw details send me brother
Alen screw size
Guess he was afraid to even try metal,lol
See the wood smoking,half and half it works better,he let it cool down COULDNT have removed it if he didn’t,lol been there done it,lol.
Merr pass rotery hamer me kese lagegi
Usme nhi lagegi
@@KISSANHOMEENGINEERING kyu nhi legega
@@KISSANHOMEENGINEERING phn no dedo
Legaaggagagagaagagga nhhnhii
@@bmcg8888 kyu bhia
I have one of these knock off sets and literally the WORST hole saws ever. Cutting teeth, wait what cutting teeth??? These tools are literally stamp steel and the teeth aren’t even sharp as you can clearly see when cutting wood in the video. Being tho my set came as a gift, I have to now sharpen the whole set. Good thing I don’t use these tools that often lol
Boy cuts cardboard good,lol,how about metal,lol
sound dont let u hear voice thumbs down on this video