The ultimate scooter clutch [MUST SEE] Reveno clutch
Вставка
- Опубліковано 2 сер 2024
- REVENO CLUTCH:
www.rollingwrenchdenver.com/p...
REVENO CVT kit:
www.rollingwrenchdenver.com/p...
If you are looking to get the most performance out of your scooter clutch, this one will blow all other out of the water. The scooter clutch by Reveno is very impressive. It uses motorcycle clutch technology in a scooter! Whaaat! - Навчання та стиль
Thanks for another great video! Cheers!
I feel as though content as well-crafted as what you guys do inspires people a great deal. When you teach a person valuable things you contribute to their life. It's obvious that the purpose of your videos is to share and inform. You guys do a nice job.
Dang dude! I really appreciate you 🙏. It’s nice to get validation of the time and effort I put into these videos. UA-cam is full of a lot of negativity. Thanks again
The 'rattling' dry clutch is a status symbol in motorcycling. Just like the whine of gears from gear driven cams.
well i like the functionality of the clutch but I dont like the sound.
Just got it today! Your the man brother your products always pro!! Thank for assembling the whole clutch too.
Installed on the 49cc...... little rain earlier so I wait to ride it. Love the sounds at idle!
Did you have any issues with performance after install? We installed on 2020 Ruckus, immediately the spacer was getting chewed up, and the performance was lacking, we put stock clutch back on, and performance is fine. Any suggestions. We have made other mods, and no issues. Thanks for any suggestions.
If you want a happy medium on the sliders ive seen alot of people use 3x12g and 3x14g sliders
Thats nice.. Sometimes the problem of the cvt in scooters is the dragging and vibration when you take off.. that kind of a cluth asseble is very good i think.. Bec the pad doesnt slide with the bell
That looks like a very sick clutch thank you for showing us that another great video can’t wait to see you next one👍👍👍👍👍
Been snoopin your vids for over a week, you are seriously inspiring me dude! You are soooo helpful..:) Thanks for the work! Aloha from Kaua'i!
Dude! I appreciate you for the support 🙏🏻💯
This is the kind of centrifugal clutch design that should be in-use/available within the power-sports market. (Go-carts, mini-bikes & the like) ;)
I have a 150cc with a 58mm kit with a full ported and cut head to 25 and I have a total of 54 grams in the variator and it makes your bike take off a whole lot faster without messing with the gearing and the other tip is to try to make a build with no starter flywheel my current bike doesn’t have the big starter flywheel and it helps a whole lot with the acceleration
Looked them up on theyre website. Which one works on the gy6? Now ive got the maddog with a 150 but plan on getting the 232 later on. Will the same one work?
Hey Matt I just ordered this item with the contra spring. What size is the contra spring and what size rollers or sliders to start off with
whats the added speed with this clutch to a 150cc?
Does reveno make a clutch for a ruckus 50 cc with vereator to match
Thats the real traditional Clutch! 😁
is it individual roller weight or total roller weight factor that effects the variator movement? because some people mix their roller weight in one variator.
What is the best rear shock absorber? I just got one clone ruckus and it vibrates a lot.
Hi man. Just out of topic question from your video. What do you call that round female socket where you attach that rear paddock stand? Wanting to remove my center stand to make my scoot lighter but will need a rear paddock stand if ever i have to fix the cvt and all. Thanks
Awesome bro,git a question, if i do something similar do i need upgrade my carburetor also instead of stock carburetor, i got a 125cc nibbi racing carburetor, just curious, would i get even better results and performance, i just haven't had the time to install it,i work a lot,so far your videos have been very helpful to me understanding the gy6 engine of my new bike since im a new rider an new gesr head of having to wrench on my bike to lesrn.
Hello, I'm johnboy and new to gy6'ing i have a icebear mojo magic 150cc trike with a chain, so my question is do i also have a belt on the bike under the aluminum cover on the lefthand side. I've had to charge out carburetor. Because i didn't know about foam air filter oil and there special oil needed. The problem now is the bike seems to be jerky after a stop. It's coming from rearend and goes away once i get some speed. Is it because of chair or a bad belt under that cover. Help... Follow up question the bike has kick start but it hard and seems to not
Recoil. I have bad hip on right side so i have purchased a battery jumper device if needed.
New to the scooter gearing side. I have a Gilera Runner VXR 200 that I like to do some wheele and im not really good at it. I want the bike to come up by its self, I got the polini 9roller variator, polini kV belt and the polini clutch & bell kit adjustable springs tension, but I haven't installed anything as of yet just want to know what I need or should or shouldn't I put them nee parts in?
Thanks in advance
Is there any upgrade or modify suggestion that I can do to make my gy6 150cc scooter more fuel efficient?
Sounds good u done a good job
Using it for a year now, it's just jump on every start! Love it!
What do you have it on? Gy6? What kind of riding do you have?
@@RollingWrench no, it's just a Taiwan make scooter in Hong Kong daily use… the acceleration is a lot faster and it do save more fuel!
And the sound do remind a lot of older biker about the 2 stroke bike with dry clutch at the 80s
grygry777 I like the sound :-)
Right,so how much money you out.HA!Ha!
Thanks for all the 50f video's
is it safe the clutch axis hang on? doesnt have the transmission cover a bearing to rest the clutch axis?
Hi Vespa GTV300 model when using the reveno clutch jcosta suitable for use in the variator
Steve from Annapolis watch out AmStar 150 we're going all out high performance camshaft Clarks shoes nice pic carburetor you really get me charged up keep up the good work thank you you got my vote
Proubley wonten have no problem seeing it if it go that fast that's perfect thumbs up my new friend
Is it ok to install for nmax click aerox or Honda pcx?
How large is that nut you have to remove on the old clutch?
I wonder if this clutch would work for the 90cc 2 stroke ATVs I would be very interested
Question? Is it possible to swap a kawasaki tricity 200cc engine with a 90cc engine? I am a beginner to scooters. I wanted to start to a lower phase before going with higher speed. If it is possible, where can I buy a 90cc engine from Honda or Kawasaki? I hope that some could direct me to the right direction. Thanks in advance.
Your bike sure does boogie!
Hello sir, can you feature a kawasaki curve 115cc which I believe uses a gy6 engine. But I don't know what variant of gy6 it is. Thanks in advance
MR Rolling Wrench sounds like a Coleman CU 2000 Brigs & Stratton Off Road Mini Bike. Thanks for your videos U The Man.
Thanks for the support 🙏💯
@@RollingWrench do you guys still put together Maddog icebear Chinese scooter? If you do, have you guys tried the Gen IV version? Thanks hope to hear from you soon..
@@RollingWrench can this work on a 2 stroke Zuma 90cc
What motor do you have in there?
excelente sistema de embrague!! espero encontrar disponible para burgman 150cc
Can i install on my 115cc Yamaha rayZr scooter
Any videos on oil coolers?
Great video, Matt! That clutch looks pretty awesome. I wish Reveno made a clutch like that for the stock Ruckus motor.
Thank you 🙏. Actually they do.
hey broo, what it's honda motor?
Hilmi YusufH ya, Honda GET engine
Matt why didn't you go for the heavier your sliders. The clutch seemed to grab right off the line so improve the top end.... Paul
Do all scooter clutch have the same clutch size?
Steve from Annapolis High Performance camshaft and carburetor clutch kit already got the header exhaust thanks
Cool stuff! Is the fuel injection module working together with the ignition system?
Thank you. They are separate units.
Will this clutch kit fit a 250cc 4 stroke gy6
Will this new clutch kit you have work with my gy6 racer 50 I want a clutch that’s not going to slip
now when you say its a 70% increase, is that over stock or over something like a ncy or other aftermarket clutch?
Sup with that radiator? make a video about oil cooling bro!!
When is the renovo clutch for the Honda get engine going to be available again?
How many millimeters in 150cc stock carburetor comes with
My motor bike is kymco grand dink 150cc. It is ok to use the Reveno cluth?
Will this work on a honda ch80
i’m trying to upgrade my 50cc ice bear mini max and I need help on parts to upgrade without using a bigbore kit. I have done some works in it I have changed the airfilter and the exhaust but the cvt is that i’m trying to upgrade and trying to derestrict it. please anyone help me
can it fit to scomadi TT125?
What the name of clutch spring torgue remover tool
Hello great video I would like to know if I can get this kit for a 2014 Burgman 200, I would like it to engage sooner ya give me more top end, if you can help me out that would be great and thanks.
I have a question I ordered a big bore kit 80cc for my 49cc would I have to change my carburetor or is the stock one fine? Thanks
You can upjet your stock carburetor and it would work/run but to get the must out of the bbk you should upgrade carburetor stock carb is normally 18mm with the 80cc (47mm?? Kit) maybe run a 20mm carb delete airbox uni fitler or cone filter... also them stock carbs normally dont let you adjust air/fule they cap it..
Will it fit my Kymco Like 150i ?
Feel good to see you wear thai’s beer Chang. I’m your Fan from Thailand. Building my Ruckus from scratch
Sweet! Thanks you 🙏. I love Thailand, it’s my favorite place in the world
Nah i love that clanking of the cluch
i have a GY6 have you heard Sinski? 125cc can you give me some flyball combination for stock engine and springs
So where can i order one of these scooters online at?
good friend has this kit for Honda pcx 150 2019?
I'll look but hope Reveno makes that clutch for the BMW C600/C650/C650GT which all use the same clutch and needs this system!
It will get better as it beds in.
Buying one next week for my icebear 😎😎
Fantastic video
Thank you 🙏🏻
Is their a torque spec for that nut?
Can I use this clutch on a Sym 50cc scooter, with a big bore kit? It’s a 2 stroke.
Im gonna get it anyways! I trust Matt's judgement on it! Thanks for the review bud!
I trust Matt as well ,he didn't have my sizes,so went to Reveno web-site order what the engineer said would work,I went to fine tuning,I performance clutch worked way better.Email Reveno to start a return no refund and you tune the wrong way and mess up the warranty you on your on.Look at my post
I have a cheap Chinese .49cc scooter with a CF 250cc engine stuffed in it. I'm looking for a better clutch for it after a bit more power and a gear up kit. Would love to know if this clutch is made for the larger engines. The engine is still stock but with a slight advance to the timing and I'm sick of the clutch getting hot when I ride it hard. Makes it hard to do wheelies when the clutch is slipping and chattering. This design looks to be the answer toy prayers, if one is made for my engine.
Could you still hear the clinging dry clutch sound when you cover them with stock engine cover?
You can almost not hear it with the cover installed.
Hi there!
I run a 110 cc Honda Navi scooter!
Would like to change da rollers! Wat weight of rollers do you suggest I go wit to get more horsepower!
Thanks!
if you want more acceleration goo for 6 8gs for balls. if you want to have more top speed goo for 6 12gs but if you want decent acceleration and top speed goo for 8/12 or 10/13 or 8/12 its up ti your ride habits.
I have a 150cc Hammerhead buggy Chinese version of the gy6. I'm definitely trying to get more grab for hill climbing. I'm still running complete stock setup. Not fun. Had to take different paths to bypass steep hills. Will be upgrading soon. Would you recommend that clutch setup for my buggy???
It will probably work great! But to be honest I have no experience with this clutch in a buggy
cool stuff and review man.....nwy, is it fit on any 150cc scooter?
Thank you 🙏. It will work with a 150 as well
Any updates on how these hold up? Can you change engagement rpm? Im extremely interested in getting one for a 170cc buggy build im working on.
You can change all of that. However I wouldn’t run it on a buggy. It’s to much weight
How do you know what year motor you have for your GY6? Because I have a 1pe40QMB 2 stroke
*080900352*?
Also pick up 1E40QMB 2T
*110959887* how do I find year, make, model and piston size???
I just wanna share my scoot. 😊 I got Honda click 150i and I'm using a flyball 3x 12g mixed with 3x 15g all stack except that I removed the speed limiter at the ECU. From 126 kmph in a center stand to 146 kmph
How do you remove the limiter from the ecu ??
is there any clutches that reveno makes for the honda ruckus nps50?
Working on it. Sit tight
you should probably use the 2 face curoa wire due to its flexibility and better durability. I also just switch to the DrPulley 12.5gram. Those things sure perform better but also noiser as hell and more expensive. (4 times the price for the roller origin)
Can I put a middle of the road up grade on a 150 gy6 Chinese scooter moped long case and how do I order from rolling wrench I have the cash but need to know where to order ??? Lmk asap
So I have a 150cc Tao Tao powermax, what clutch and weight do you recommend. I mainly want to keep the tuning I have, good accel, but my top speed is 55-60ish
please email him
You need light grams how much grams you have in your variator (rollers)
hi guys sorry for the question i know i will be mention a non gy6 i would like to upgrade my clutch for my Honda helix 250 and the gy6 is a variation of the same engine block does anyone know is will work the cutch upgrade gy6 on a helix looks almost the same
How is the carb Sir
I saw that Reveno made this clutch for the 50cc GY6 as well.
Good video. I may do this to my gy-6...
I have a 49cc Jonway. Thank u👍
You need to put that money for better or a scooter for the price you will spend getting that clutch only,plus the cost of fine tuning
@@mickeycollins3108 ya if u want to tune a 50cc scooter u should definetly buy a 2t
First get a big bore kit better carb, camshaft, cylinder head and then you will have enough power to make use from this clutch otherwise normal centrifugal type cluth will be enough.
Cant find your website what is your website to order parts from you? I have a X pro 200cc saber adult scooter. I need complete clutch assembly variator kit for it. Can you help ?
Hello how about gas consumption with reveno
Que tal te resultó reveno ?
Thanks
Best I have seen is a brand called LCR racing for minarelli. they are a small company like Team Cristofolini and only produce to order, but it went with the 2fast billet torque driver. The Stage6 torque control clutch is a formidable clutch too, you can adjust pretty much anything about it
You got the right state of mind with that ,reveno is high price,no return, costly for fine tuning
I see them on high end drag builds .. it's the same old adage : speed is a question of money, how fast do you want to go?
@@shoominati23 ,so true,
@@mickeycollins3108 Sure it will cost you a lot if you know nothing about tuning LoL.
@@user-ij9nc2rm3f I know stock clutch is just as good for slot less money.on 50cc with 5 g slider weights
would this clutch work with the 50cc? or will it only work with a gy6 swap
Only gy6 :-(
Do you need a motorcycle license for 150 cc scooter
I can tell 🤔 your ruckus is extremely healthy, just by watching them speedo # jump . Dig the vids Salute 🙌
To help with the ringing..... this thought is dependent how hot the outer "bell" gets, could you take a slice out of a lawnmower tire inner tube (think huge rubber band) and stretch it over the outer portion to act as sound dampening?
Ya, i think you could
So what do you do when pads get low do you just buy more pads
I was wondering the same thing, is this clutch rebuildable? It looks like there are construction screws on the back side.
How's the wear n tear of this clutch? Does it require frequent servicing?
I have had mine for about a year now. Everything is cool. No servicing yet
No clutch for kymco xciting 400i ??
would this fit a Taotao motor with a 100 cc kit?
stock 49.5cc.
yes another model
We need to see it on the get
How you get that. ? Because they don’t ship to United States. I’m trying to get that to my scooter