I’ve got one on a well built 171 and I really like it. My only wish is that it would start to grab 500 rpm sooner. Really a minor tweak just for me and my setup. I love it otherwise and wouldn’t swap it for anything else currently on the market.
Reveno has a better version 2.0 to improve the rolling bearings inside to make the action smoother and reduce the chance of getting stuck and also has a mute kit to eliminate the metal knocking sound. My DRG158 is installed with the Reveno-2.0 front and rear groups in Taiwan's many modified products and interesting motorcycles also welcome everyone to travel or settle in Taiwan
GY6 can be installed. You can ask him if he can import Reveno version 2.0 from Taiwan. Front and rear groups. My DRG158 in Taiwan is also a GY6 engine, but I installed 2.0.
Do these work on higher rpm/power setups? been interested but I'm scared it will get smoked engaging at 9000rpm in a 30hp drag application (with proper break in first)
I am having trouble with performance exhaust it won’t get past the bottom of the frame what do I need to do heat it and bend it so it goes past the frame and then heat it to go up so I can put muffler on?
I installed one from another ruckus I just boght and I took it for a ride and noticed that when I let go of the throttle the rear wheel sometimes lockes up is that normal?
Türkiyeden selam Volta APEC PS5 125 cc var Uzerinde GY6 alt yapisi mevcut baga kaydırıcı ölçüleri 18×14 14gr bu parça benim makine icin olurmu 743 20 30 bando kayış var
I am not going updated my Piaggio Mp3 250 IE no more Matt because do not make engine no more for it ( Quasar )! I am going save up the money for a used Spyder or Massimo spider!
Usually just the bushings break. There's a bushing removal tool though. You'll also need a common Micrometer to measure the bushing dimensions for replacement.
Definitely getting one of these, and your rear disc brake kit for both of my GY6 swapped Rucks. 👍🏽👍🏽
Good choice! Thanks for the support
Thanks for the video Rolling Wrench 🔧
I have a 50cc trike and I’ve upgraded everything except the varator and clutch how much is it for a 1p39qmb engine?
I’ve got one on a well built 171 and I really like it. My only wish is that it would start to grab 500 rpm sooner. Really a minor tweak just for me and my setup. I love it otherwise and wouldn’t swap it for anything else currently on the market.
We can do different springs. This will solve that issue :-) I’m glad you love it :-)
So if I am doing the 125cc big bore kit yominashi cam and I have the yoshimura exhaust whitch clutch size should I get?
Reveno has a better version 2.0 to improve the rolling bearings inside to make the action smoother and reduce the chance of getting stuck and also has a mute kit to eliminate the metal knocking sound. My DRG158 is installed with the Reveno-2.0 front and rear groups in Taiwan's many modified products and interesting motorcycles also welcome everyone to travel or settle in Taiwan
Good day do have reveno clutch for 4 S YAMAHA 110 or 115cc MIO SPORTY,NOUVO,
Thanks
hi there, any Reveno clutches for the Genuine RoughHouse 50 2t, PGO RoughHouse 50 2t?
heey question, can I fit that clutch to my 125cc cmc italjet ? its a gy6 engine tho
GY6 can be installed. You can ask him if he can import Reveno version 2.0 from Taiwan. Front and rear groups. My DRG158 in Taiwan is also a GY6 engine, but I installed 2.0.
Buddy... Please guide me to choose reveno clutch for my TVS Ntorq 125...
Love it, i will be buying one of these soon!
You will love it!
Una pregunta ese se puede instalar en un motor gy6 150cc china ?
Can you tell me which clutch I need for a Honda PCX 150 thanks Mo.
www.rollingwrenchdenver.com/products/honda-pcx-reveno-clutch-2-0?ToPasteboard
how long can a titanium torque drive last if you have a back rider always?i found out that it is not as durable as the metal counterpart
Do these work on higher rpm/power setups? been interested but I'm scared it will get smoked engaging at 9000rpm in a 30hp drag application (with proper break in first)
Is there or will there be a 2.0 version for Dio 50?
Would love to put a turbo on my razor 150 Chinese GYS…🙏🏼
I am having trouble with performance exhaust it won’t get past the bottom of the frame what do I need to do heat it and bend it so it goes past the frame and then heat it to go up so I can put muffler on?
Can a Reveno Clutch fit on a 150cc short case motor?
Yes
Can u get that for the X max 125cc ??
I need for kymco súper 8x 150cc 2021
I installed one from another ruckus I just boght and I took it for a ride and noticed that when I let go of the throttle the rear wheel sometimes lockes up is that normal?
No, definitely not normal. This wouldn’t be clutch related. This sounds pulley related
@@RollingWrench ok. I'll take a look. Thanks bro
Link for the clutch pulleys? I'm doing a reveno on 50f zuma
No clutch pulley needed on the zuma 50f. Just remove your old clutch and install the Reveno
Would these work on the new Ezgo golf cart engine has a kymco 150 cc engine
I wouldn’t recommend these clutches for anything but a scooter. It’s to much weight for this style clutch
Kymco engines are not the same as common GY6 engines.
Kymco is expensive.
I'd sell it & just go buy a common gy6 Chinese scooter.
can this dry clutch stable in 300km trip or it will be overhead ?
Ya, no problem. The only issue is when you are trying to do burnouts and stuff. Otherwise these clutches are incredibly reliable
Türkiyeden selam Volta APEC PS5 125 cc var Uzerinde GY6 alt yapisi mevcut baga kaydırıcı ölçüleri 18×14 14gr bu parça benim makine icin olurmu 743 20 30 bando kayış var
I have a Kymco super150, when I get 28mph it bougs down. What could be cause of it?
Jetting. Watch my how to tune a carburetor video
How I wish to have one...
We need a GET Clutch!!
Will this work for a vespa 150??
Yes
1:48 Maybe some blue tape would suffice if one didn't grind the socket too hard into it..
That would work too
I am not going updated my Piaggio Mp3 250 IE no more Matt because do not make engine no more for it ( Quasar )! I am going save up the money for a used Spyder or Massimo spider!
Reveno clutch how it work
Can the reveno clutch be used on a Honda dio af18
Yes :-) www.rollingwrenchdenver.com/products/copy-of-gy6-reveno-clutch
@@RollingWrench would I need to shim it
@@Burronster no you would remove your original clutch from your original pulley and install this clutch in its place
Does anyone know how to replace engine mounts On a 150cc gy6?
Usually just the bushings break.
There's a bushing removal tool though.
You'll also need a common Micrometer to measure the bushing dimensions for replacement.
@@noneshere okay thank you I will buy the tool tonight.
@@noneshere do you have a link for the removal tool? It sounds like these bushings could be a yearly replacement.
oh my god the audio is just.....IT ACTUALLY HURTS ugh but thanks for the info
Does anybody know if you can put a GY6 171cc Big Bore Kit (QMJ157) on a QMB139 engine?
No you can’t. They are two totally different engines
:) no ładny wynik
It can reached India 🇮🇳
I stay with the old design… its more heavy Duty
I haven’t killed a Reveno yet. It’s been 2 years in my 232cc
Which one would I get for a get ruckus?
It works on Horizontal Minarelli 50cc? Like Yamaha Aerox eg
Yes it does
www.rollingwrenchdenver.com/products/yamaha-zuma-genuine-buddy-roughhouse-2t-reveno-clutch?_pos=1&_sid=2f9876b84&_ss=r