Sal, just want to thank you, keep these videos coming. This helped both me and a coworker get spun up initially and I've referenced it a couple of times since then on small items I forgot along the way. Cheers!
When you try to use the join the network at the moment 20:18, The popup raises, How do you know the error is related to access policy or vlan name? I got why this happen but didn't got the way of troubleshooting and how know the VLAN issue.
Hi Peter, thanks for the comment! It will support back to the 17/27/3700 series APs. Take a look at the release notes www.cisco.com/c/en/us/td/docs/wireless/controller/9800/16-12/release-notes/rn-16-121-9800.html#id_114714
Sal, thank you very much for this video. I just want to ask if we can use the same subnet 192.168.1.0/24 for out of bound interface and Ap manager configurations on the same controller. For example 192.168.1.3 /24 for out bound interface and 192.168.1.4/24 for ap manger settings.
Hello Sal, Thanks for the great content...Keep up the good work! Quick question: Can you show how to configure an AP that isn't on the same layer 2 subnet to join the WLC via DHCP option 43 & DNS? Thanks again. Looking forward to your response. Cheers!
It’s not the adder license that would cause that. They will still register but give you out of compliance warnings, if you didn’t have enough licenses. You have something else going on.
After configuring the controller as you brilliantly showed thanks. I can't get data through to my security device device. data is not flowing. please help
Hi Sal, which ports on the controller should we physically connect a LWAP (9130 to be precise)..is it on the TwoGigbitEthernet/0/0 port that you configured in your video?
Hi. quick Question... How do you bypass the day0 wizard and create a trust point on the 9800-l? i have already defined the mgmt-interface as trust point
wireless config vwlc-ssc key-size 2048 signature-algo sha256 password 0 MYPASSWORD You first need to shut the Radios down - ap dot11 24ghz shutdown and ap dot11 5ghz shutdown Also Add a country Code such as: ap country US
Our Stand-Alone devices will not have access to the Internet. Can you still activate your license without the internet using a simple copy and paste? Also, any plans on creating a video for more advanced settings?
Hi Sal, ygreat video bro, However I do not understand where did you associate the DHCP scope for the clients? how do they know which IP address to take? I only see you configure 2 SSID but no more information related. I trully appreciate. Thanks in nadvanced.
Dhcp typically comes from your network. You would usually have a dhcp server somewhere. I run mine on my switch. If you have no other place to run dhcp you can configure it on the 9800.
I have upgraded my AP 9115 to 17.5 Embedded WLC but after booting it is not provisioning SSID ..Can you help me on that ??? The Ethernet interface of EWC has been assigned manual ip and the switch port the EWC is connected is trunk port having Native vlan 10.My laptop is connected to access port of the vlan10 .Please help me on this??
I own an old 2504. This model looks sweet. But it'll probably be a couple of decades, before this one gets affordable for lab use unfortunately. I really wish Cisco would make scaled down lab models, limited to 5 APs.
Sal, awesome video, I have to admit the new IOS kinda confuses me, can you go deeper into AVC, RRM, DCA, TPC, RF Profiles, WLAN Profiles, and more into an enterprise like deployment? You mentioned you would on a separate video, and I am pretty sure your followers would definitely appreciate the value add.
Max throughput is 5gig. The dual ports are for redundancy. There is a performance license you can get. It basically takes off the software limit. Depending on traffic size you can expect anywhere between 5-10gig/sec with the license.
Hi Muhammad! You need to give the interface an IP address so you can reach it. If you dont statically set it, and rely on DHCP you would never know how to get to it. In my case I know what IP addresses are available. I take my statically assigned IP addresses out of my DHCP Scope. Hope that helps!
So bizarre to me that they went to Micro USB and not USB-C. They pulled this same trick w/ Mini USB, adopting it just when it got dropped by everyone. In 2 years I'm not going to be able to find a MicroUSB cable and have to support these for a decade after.
Thank you so much!!! I have some questions regarding the 9800-l at home, and I have a few questions for you!!! I am trying to become an expert in Configuring the controller....I live in Dallas, Texas....Do you live in Dallas???? If not, I need to share my contact number with you...I "need," to be good as you!!!
Hello, I’m not great with UA-cam and was hoping I could find an email address to chat directly about our network needing an upgrade at an Assisted Living facility I manage. If you would be interested in helping recommend a great system I would be happy to donate/support your channel! Please let me know, Thank You!
Lock feature not explained...some people are new to these things ..please ask Cisco community to not just put out advanced jargon or the next company will make it simpler.
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
The official Cisco videos on this are basically worthless. Thank you for cutting to the point and showing what 99% of want to see.
Sal, just want to thank you, keep these videos coming. This helped both me and a coworker get spun up initially and I've referenced it a couple of times since then on small items I forgot along the way. Cheers!
I LOVE the login screen background.
Just wanted to say Thank you! Always enjoy your videos! Happy Holidays from a fellow Collab/Network Engineer.
Thank you for the video!
When you try to use the join the network at the moment 20:18, The popup raises, How do you know the error is related to access policy or vlan name? I got why this happen but didn't got the way of troubleshooting and how know the VLAN issue.
Thanks for sharing as always. Just a quick question. Would it only support 9100 catalyst APs?
Hi Peter, thanks for the comment! It will support back to the 17/27/3700 series APs. Take a look at the release notes www.cisco.com/c/en/us/td/docs/wireless/controller/9800/16-12/release-notes/rn-16-121-9800.html#id_114714
Dang it! I have 2600’s all over my building. That’s a bummer
Sal, thank you very much for this video. I just want to ask if we can use the same subnet 192.168.1.0/24 for out of bound interface and Ap manager configurations on the same controller. For example 192.168.1.3 /24 for out bound interface and 192.168.1.4/24 for ap manger settings.
Hello Sal,
Thanks for the great content...Keep up the good work!
Quick question: Can you show how to configure an AP that isn't on the same layer 2 subnet to join the WLC via DHCP option 43 & DNS? Thanks again.
Looking forward to your response.
Cheers!
Hello.
Can you please advise on Adder licenses for APs.I have configured 3504-WLC but couldnt discover the APs
It’s not the adder license that would cause that. They will still register but give you out of compliance warnings, if you didn’t have enough licenses. You have something else going on.
After configuring the controller as you brilliantly showed thanks. I can't get data through to my security device device. data is not flowing. please help
Hi Sal, I am getting error while submitting finish.. I am keep service port and wireless management port on different vlan.
Hello, did you choose random IP for WIreless management IP?
Quick question, I wonder how to access the controller via macOS terminal? Thanks
Its very cool and it will help during my set up.
Where did you get the IP address 192.168.40.5 from at 13:35 ??
Hi Sal, which ports on the controller should we physically connect a LWAP (9130 to be precise)..is it on the TwoGigbitEthernet/0/0 port that you configured in your video?
Hi. quick Question... How do you bypass the day0 wizard and create a trust point on the 9800-l? i have already defined the mgmt-interface as trust point
wireless config vwlc-ssc key-size 2048 signature-algo sha256 password 0 MYPASSWORD
You first need to shut the Radios down - ap dot11 24ghz shutdown and ap dot11 5ghz shutdown Also Add a country Code such as: ap country US
what commands do I have to configure on the C9800-CL to perform smart license with policy? would really appreciate if you can share commands here
It’s probably easier to set it up via the gui.
Hi.
Now, the most important! What address IP your computer received when you log in TestSSID? I didn't see you setting any DHCP server.
Yes, #THUMBSUP - Thank you, another good vidoe on WLC.
Our Stand-Alone devices will not have access to the Internet. Can you still activate your license without the internet using a simple copy and paste? Also, any plans on creating a video for more advanced settings?
Hi my friend, are you interested in reviewing rj45 crimp tool kit?
Hi unfortunately i do not do manufacture requested product reviews.
Hi Sal, ygreat video bro, However I do not understand where did you associate the DHCP scope for the clients? how do they know which IP address to take? I only see you configure 2 SSID but no more information related. I trully appreciate. Thanks in nadvanced.
Dhcp typically comes from your network. You would usually have a dhcp server somewhere. I run mine on my switch. If you have no other place to run dhcp you can configure it on the 9800.
What is the best Access point for warehouses
Does the cisco 9800L support bandwidth limitation or bandwidth control per user?
What settings needs to be done when your WMI and AP vlans are different??
I have upgraded my AP 9115 to 17.5 Embedded WLC but after booting it is not provisioning SSID ..Can you help me on that ???
The Ethernet interface of EWC has been assigned manual ip and the switch port the EWC is connected is trunk port having Native vlan 10.My laptop is connected to access port of the vlan10 .Please help me on this??
How do you configure an access point to act as a controller?
mine does not give you the option to setup http server, why is that? Are you doing it through your laptop CLI? or vmware ESXi?
I own an old 2504. This model looks sweet. But it'll probably be a couple of decades, before this one gets affordable for lab use unfortunately.
I really wish Cisco would make scaled down lab models, limited to 5 APs.
How about the virtual 9800 controller? Same functionality. Just need a server to put it on.
Hey San Thank you... 😁
What is the coverage of access point
Hello Sal,please confirm if the ports 0-3 re fixed RJ45ports..they don't require SFP..is that correct
Correct!
@@CiscoSal thank you...
Sal, awesome video, I have to admit the new IOS kinda confuses me, can you go deeper into AVC, RRM, DCA, TPC, RF Profiles, WLAN Profiles, and more into an enterprise like deployment? You mentioned you would on a separate video, and I am pretty sure your followers would definitely appreciate the value add.
can this support WIPS Configuration?
Nice video & clear explanation , but it is missing the connection diagram & DHCP settings
Could you please do a video on 9800L authentication using LDAP and LocalEAP.
Is the max throughput for this box 20G by Port Channeling the 2 10g uplink ports?
Max throughput is 5gig. The dual ports are for redundancy. There is a performance license you can get. It basically takes off the software limit. Depending on traffic size you can expect anywhere between 5-10gig/sec with the license.
Nice video thanks for making it.
great training thanks
perfect demo
So my wizard never popped up in the cli so I've been having a hard time setting this thing up. It just booted up to the prompt and that's it.
Maybe try a factory reset?
Hey why are choosing the random IP addresses? What if the IP address you randomly chose is in use?
Hi Muhammad! You need to give the interface an IP address so you can reach it. If you dont statically set it, and rely on DHCP you would never know how to get to it. In my case I know what IP addresses are available. I take my statically assigned IP addresses out of my DHCP Scope.
Hope that helps!
So bizarre to me that they went to Micro USB and not USB-C. They pulled this same trick w/ Mini USB, adopting it just when it got dropped by everyone. In 2 years I'm not going to be able to find a MicroUSB cable and have to support these for a decade after.
Hi Sal, sorry, I didn't greet you first.
How much is it?
Thank you!!!
Sal, do you still respond to this Channel???
I do what’s up? 😁
Thank you so much!!! I have some questions regarding the 9800-l at home, and I have a few questions for you!!! I am trying to become an expert in Configuring the controller....I live in Dallas, Texas....Do you live in Dallas???? If not, I need to share my contact number with you...I "need," to be good as you!!!
Haha. I do not live in Dallas. Your best bet would be a training class. If it’s one or two questions i would go to Cisco TAC.
Brilliant!
Great info Sir !
Thanks!
Man this unit is still so expensive in 2022. Can't afford one now.
You can do the virtual controller, or use an AP as the controller. Lot of different options to fit your budget and the scale you need.
Hello,
I’m not great with UA-cam and was hoping I could find an email address to chat directly about our network needing an upgrade at an Assisted Living facility I manage. If you would be interested in helping recommend a great system I would be happy to donate/support your channel!
Please let me know, Thank You!
Lock feature not explained...some people are new to these things ..please ask Cisco community to not just put out advanced jargon or the next company will make it simpler.
Hi Chi, What lock feature are you referring to? The purpose of this channel is to cut through the jargon and show how simple things can be done.
J