Wow, cleared an obstructed pilot jet, after third attempt, used 28AWG wire. Works like a charm, no choke to stay alive. I am jetted per RYCA rich jets set for the S40 CS1. Idles right nice. K&N air and short megaphone. I like the backfiring exhaust.
There's a lot of good info in this, he's obviously made the mistakes, and learned from them, it's much easier just to trust what this guy says than try dumb shit like hitting a screw driver with a hammer thinking that does something!
Looking at a s40 as a first bike. How often should you have to clean the carb and is there a way to maintain it that would extend the time between cleaning?
I think you only really need to do this deep cleaning if necessary, I have that bike and just want to clean everything up, not like it's been sitting like this one in the video so I'll just pour some carb cleaner in the gas tank
I have the same bike my carburetor is acting up if i use a spray bottle with gas it will stay runing but every time I turn the gas on it dies do you know why
I have the S40 and when i pulled the carb to clean the idle jet i noticed that the throttle cable only opens the throttle plate, so what pulls up the main jet needle as throttle is increased ??
Erm ... tear it all way down and remove all rubber to side and needed soak it carb cleaner 1 -gal cleaner kit! REASON: just 1 little piece them black dust spots will plug up your new jets.. ! at minium i would wash it in carb cleaner or soap water.. like purple power.. dam.. i see alot debris.. ! cant afford it/ luv sonic cleaner though
Wow, cleared an obstructed pilot jet, after third attempt, used 28AWG wire. Works like
a charm, no choke to stay alive. I am jetted per RYCA rich jets set for the S40 CS1.
Idles right nice. K&N air and short megaphone. I like the backfiring exhaust.
And great video. Good angles and explanations. Makes it look a lot easier than some others I've watched.
That carb ain't right.
Thanks for the informative video!
Super detailed and helpful. Ride on brother
💥 S 💨 A 💨 V 💨 A 💨 G 💨 E 💥👍🏻☮️
Best wishes from Germany!🤞🏻🕊☮️
Thanks for the great video!! Good explanations and great info!
BTW, if you're unlucky enough to lose the float bowl pin, you can use a similar gauge nail, cut to fit.
Good video! But bro has 3 tools there and mis named 2 of the 3.. 😂
Sonic cleaner will eat holes in brass and aluminum btw!
outstanding
Am I crazy or does he sound like the main character on king of the Hill?😅
subbed to be the 1k follower. Thanks for the vid
Do you still have the item number for this rebuild kit? I may need to rebuild mine.
There's a lot of good info in this, he's obviously made the mistakes, and learned from them, it's much easier just to trust what this guy says than try dumb shit like hitting a screw driver with a hammer thinking that does something!
Great bike. When you put a pod filter on the carbi what do you do with the vacuum input plug on the carbi?
Looking at a s40 as a first bike. How often should you have to clean the carb and is there a way to maintain it that would extend the time between cleaning?
I think you only really need to do this deep cleaning if necessary, I have that bike and just want to clean everything up, not like it's been sitting like this one in the video so I'll just pour some carb cleaner in the gas tank
I'm gonna sell mines, are you in California?
DO NOT touch it.
ONLY clean if/when necessary.
I have the same bike my carburetor is acting up if i use a spray bottle with gas it will stay runing but every time I turn the gas on it dies do you know why
I have the S40 and when i pulled the carb to clean the idle jet i noticed that the throttle cable only opens the throttle plate, so what pulls up the main jet needle as throttle is increased ??
great video! where did u buy this kit? do u have a link for it? i just installed open pipe as well popping like a crazy lol ! thanks
I do not use a kit, I buy jets in carious sizes and keep them in stock.
awesome video.how often do you need to clean the carb?
Only if/when it needs it.
You mentioned having carburetor conversion kit. Where might I find one? I'm wanting to do a bobber build on my ls 650
One fellow on ETSY.com makes a great kit!
Hank Hill is that you?
Yes, Boomhauer, it's me!
Do you know what kind of carb this is? I can’t seem to find a replacement
were you ever able to find one?
Erm ... tear it all way down and remove all rubber to side and needed soak it carb cleaner 1 -gal cleaner kit! REASON: just 1 little piece them black dust spots will plug up your new jets.. ! at minium i would wash it in carb cleaner or soap water.. like purple power.. dam.. i see alot debris.. ! cant afford it/ luv sonic cleaner though
Where can I get a quality jet kit that isn't cheap Chinese crap?