Thank you for this. I would rather like and subscribe to you than Chrysler. I was able to flash a 1989 plymouth voyager. The best van ever made. You are a life saver.
Awesome video. Got a 2014 Chrysler 300s on a trade. Bags blown, deer hit. Won't detect new programed key. Says remote start disabled. Won't start. Reflash and clear codes . Then car may run??????????
Curious if there is a way to restore all the vehicle modules to factory programming? Used an electronic modification and it corrupted the workings within all the modules. Can you reflash all the modules to completely wipe the modules from the interference caused by the electronic modification? Thanks.
@@slaterrockshop4564 awesome great. Thank you. Do you need to have a specific update or TSB to be able to update or can you just update and restore the modules regardless? Thanks.
@@ryanj1221 there's a way to just do a basic flash on a module. I can't remember where you navigate to get to it, but I remember it was way harder to find the right tab than it should be
I know this is old but, they aren't asking for the Jbox serial #. There is a 25 digit serial # in the app itself that's tied to your laptop. Took me a while to figure this out
When starting mandatory PCM update witech 2.0 says "staring chrysler flash process" and fails "can open communication with module" I know pcm is worikng as can read dtc and car runs normally. any ideas?
Thank you for this! This video was extremely helpful. This allowed me to skip creating an account, to see what's on the other side!
Thank you for this video! I was missing the one subscription and I was stuck until I watched this. Very helpful! 👌
Great simple video! Thanks,.... So we can all remember!
Thank you for this. I would rather like and subscribe to you than Chrysler. I was able to flash a 1989 plymouth voyager. The best van ever made. You are a life saver.
That was voted van of the year in 89 and garth brooks won a cma that year too
i am bout to do a 96. bout a wiTech 2.0 cable however i do a Autel J box do I still have to follow these steps?
Awesome video.
Got a 2014 Chrysler 300s on a trade.
Bags blown, deer hit.
Won't detect new programed key.
Says remote start disabled.
Won't start.
Reflash and clear codes . Then car may run??????????
Unsure, sounds like that could be a tricky one!
Curious if there is a way to restore all the vehicle modules to factory programming? Used an electronic modification and it corrupted the workings within all the modules. Can you reflash all the modules to completely wipe the modules from the interference caused by the electronic modification? Thanks.
You can try reflashing one module at a time and see what happens
@@slaterrockshop4564 awesome great. Thank you. Do you need to have a specific update or TSB to be able to update or can you just update and restore the modules regardless? Thanks.
@@ryanj1221 there's a way to just do a basic flash on a module. I can't remember where you navigate to get to it, but I remember it was way harder to find the right tab than it should be
Thanks for the video, do you if this is the same process to program a bcm on 2022 Ram TRX?
It should be
Thank you very much for the video.
What drivers do you remember? It doesn't was to register my jbox bc serial number is shorter
I know this is old but, they aren't asking for the Jbox serial #. There is a 25 digit serial # in the app itself that's tied to your laptop. Took me a while to figure this out
Thanks for the help man
hello sir I have a Dodge Neon car model 2018, can you program it remotely via TV program
I cannot , sorry
When starting mandatory PCM update witech 2.0 says "staring chrysler flash process" and fails "can open communication with module" I know pcm is worikng as can read dtc and car runs normally. any ideas?
Don't have a clue, sorry. I hate chrysler btw
HOW DO YOU SET UP YOUR AUTEL JBOX? IS ASKING ME THE SERIAL NUMBER IS SHORTER
I had to go to autel website and download drivers for the device. When I program a chrysler dodge I dont believe I needed the serial number.
😩😫 pain in the butt man !! great video
Do you think this works on dodge 2018 and up?
It should
Can you please do a video on the whole process of setting up an account
I had to call their customer help number and have them walk me through it. It was complicated. I would give them a call
ua-cam.com/video/kSkICNBBM9k/v-deo.html
Svp how to register the micropod on europe region
You location? State?
Sc
It's getting worse every year with Chrysler went through the same crap
Yes, I feel like they are working against us
wonder if there's a hacked version with the files. 3 subs is rediculous
Absolutely is! We are charging more than the dealer to program!
Don’t ever buy the vin script. I thought it would save me money. Welp I can’t get it to work so another $50 for the normal script and it works.