How do i get the Pin i am programming a jeep wrangler 2019 brand new ecu after flashing and i wanted to synchronize the immo system it asking for a 4 digit PIN code and i don’t know how to get it 😢
I heard a rumor that the pin is different from the dealer and won't work? Maybe it's true? How long did you wait to use the pin as it rolls? Also, do you have NASTF?
@@markmccormickkeys I have a buddy that works in parts he gave me the pin on the spot it didn't work and then he regenerated a new one within 10 minutes none of them worked.
You can program the key. But, you need a dealer to change the sales code to reflect that the car has a remote start. This is the difficult part that I haven't figured out yet.
I hate WiTech. You need to regester your computer at www.mopartsp.com. It's very difficult. The good news is that they have the best tech support out of all the OEMs. Call them at1 (844) 948-3242
Unfortunately, this new generation FCA system is not supported by any aftermarket tools. Hopefully soon? I have my doubts as this system is very similar to the new Ford F-150/Maverick/Bronco 2021+ models. These cars use Can-FD along with cloud-based programming. I think the aftermarket tools are going to take some time to figure these out. Thanks for watching.
@@markmccormickkeys IIt is very easy to program a third key...Especially on hands-free push button start...center console, lift out the cardboard bottom and you will see and indentation in the plastic. Put first programmed key in slot and push button to power up, but NO FOOT on brake, after 3-5 seconds, shut off power. Remove first key and put second key in same spot and do same procedure, then finally do same for third key - if programming works, you will get a key programmed message in the message center...I did it for an old key for a totaled vehicle I had, works fine.. That's what I found on the Mavericks don't know if that'll help
@@OscarHernandez-rj1dl Correct. That only works when you have two original keys. It's very rare for a customer to request a 3rd key from us. Mostly, it's for a second key or all keys lost.
hello thank you tor the video so i have grand cherokee 2021 AKL if i got the pin code from the natsf can the autel 608pro2 or the smart pro program the key ? or if i give you the car information can u send me the code ? thanks 👍
I wish. I tried everything I had including VXdiag, Autel, and Xtool VCI and nothing worked. This stupid car is the reason I spent $2K on the Cardaq 3+. I don't regret it.
Autel im608 list this auto. If it’s a grand Cherokee if it’s a wagoner it’s not listed. Is this a new system that’s not supported by them or some other machine? 2-2-24
@@markmccormickkeys Thanks for the video and information, I have a 2024 Grand Cherokee, could not find the 12-8 connector, now I know why, it is not there!
I'm unaware of the Supergoose. It looks promising. Do you know if it works with WiTech? If it does, you should be good to go.stellantisiop.com/iop/app/landing
@@TannerBugatti I hope that's true but in my experience you have to buy the vin subscription plus tech authority and PIN code. Let me know if you find out this is not the case. Thanks.
$30 for pin, $50 for WiTech 3 day, $37 for Tech Authority 3 day... you answered this to another person here. How can I get it? I am in Venezuela south america, Do I have to use a VPN?
hello friend, sorry I didnt see your answer,,, I already have cardag plus 3, aftermarket dealer account with witech and tech authority, just need the NASTF. can you get it?@@markmccormickkeys
Great video Mark! Have you done any with unlocked used OEM keys yet? One of my dealers tried a while ago and it said the fob was already programmed to another vehicle. When I read them they said unlocked. Just curious. Thanks.
Thank you for all the information and please keep the videos coming! They’re very insightful
Thank you very much.
So there is no way to do this ones with the 12+8 cable? Im using autopropad g2 but was not successful in finding the connector to it unfortunately
Unfortunately, no. This is a whole new system. I think it's going to be a while before any aftermarket tools cover this.
Correct. Gateway is larger, has one large harness. I agree with Marc...gonna be a while before a bypass is found
@@Jasonlmc06hope the bypass is found I've 1 akl situation 23
How do i get the Pin i am programming a jeep wrangler 2019 brand new ecu after flashing and i wanted to synchronize the immo system it asking for a 4 digit PIN code and i don’t know how to get it 😢
What tools do you have?
I’m using Bosch MDI 2 for GM i bought all 3 subscriptions i used Autel im608 to pull pin but it gave me 5 digits pin
Did you manage to get the pine my friend. I need it as well please
So I got the pin from the dealer but it doesn't work I think you have to get the pin from the dealer connect website. I am stuck on this one.
I heard a rumor that the pin is different from the dealer and won't work? Maybe it's true? How long did you wait to use the pin as it rolls? Also, do you have NASTF?
@@markmccormickkeys I have a buddy that works in parts he gave me the pin on the spot it didn't work and then he regenerated a new one within 10 minutes none of them worked.
@@monsonlockandkeyI've an AKL situation please let me know the solution if found. I know some nob doing them from my end but he want tel me.
Just so you know. The dealer pin is not the same as the aftermarket J2534 pin. There are not interchangeable.
Thanks for the info. I learned this on a 2023 Promaster all keys lost.
I have jeep wagoneer 2022 can I program it with witech? If yes help me with the process plz
You can program the key. But, you need a dealer to change the sales code to reflect that the car has a remote start. This is the difficult part that I haven't figured out yet.
pin from NASTF is numbers or file?
NASTF only in my experience. Some aftermarket tools will pull a 5 digit pin but this one is looking for a 4 digit.
Where can i subscribe to access witech ? I try with chrysler and i never can get to the next step in their website, i have my nasft and license
I hate WiTech. You need to regester your computer at www.mopartsp.com. It's very difficult. The good news is that they have the best tech support out of all the OEMs. Call them at1 (844) 948-3242
Hi
Can i use autel V200 witech and nastaf ? or i need AE Z Flasher 3 ?
V200 works. I made a mistake. V200 does not work with WiTech. Sorry.
I TRYED WITH ALL FACTORY STUFF AND DEALER PIN CODE DOES NOT WORK YOU NEED NASTF
I stated in the video and wrote it down on the notepad that you need NASTF for the pin.
Y didn't u use the 608 or 508 ?
Unfortunately, this new generation FCA system is not supported by any aftermarket tools. Hopefully soon? I have my doubts as this system is very similar to the new Ford F-150/Maverick/Bronco 2021+ models. These cars use Can-FD along with cloud-based programming. I think the aftermarket tools are going to take some time to figure these out. Thanks for watching.
@@markmccormickkeys thank you
@@markmccormickkeys IIt is very easy to program a third key...Especially on hands-free push button start...center console, lift out the cardboard bottom and you will see and indentation in the plastic. Put first programmed key in slot and push button to power up, but NO FOOT on brake, after 3-5 seconds, shut off power. Remove first key and put second key in same spot and do same procedure, then finally do same for third key - if programming works, you will get a key programmed message in the message center...I did it for an old key for a totaled vehicle I had, works fine..
That's what I found on the Mavericks don't know if that'll help
@@OscarHernandez-rj1dl Correct. That only works when you have two original keys. It's very rare for a customer to request a 3rd key from us. Mostly, it's for a second key or all keys lost.
Yes correct just had one ask last week for a thrid
do you really need to buy the two subscription in order to program the key?
I wish is was not the case. It doesn't make sense to me. Yes you need two subscriptions.
Did you manage to get the pine my friend. I need it as well please
Hello I would like to ask about pin code key from where can I get that please if you can help me with that
NASTF or a friendly dealer.
Did you manage to get the pine my friend. I need it as well please
Do you need the nastf just to get the pin code or for the subscription too?
You can buy a subscription to Witch and Tech Authority without NASTF. Pin requires NASTF
Hello ..
I have every things in this video
But how i can get the pin nastf code
sdrm.nastfsecurityregistry.org/register
Is the pincode from nastf a rolling pincode? Or when i program the key can i get the pin code from a friend of mine thats got nastf?
Only good for 72 hours in my experience.
It’s against nastf rules for your friend to get the PIN code for you and they could lose their access.
Thanks John. It's not worth the risk. I'd lose NASTF access for my whole company.
hello thank you tor the video
so i have grand cherokee 2021 AKL if i got the pin code from the natsf can the autel 608pro2 or the smart pro program the key ?
or if i give you the car information can u send me the code ?
thanks 👍
I can't get the pin for you. It violates NASTF rules. Also, I don't think Autel has any provision for this car.
@@markmccormickkeysdo you think it’s the same process for a 2022 wagoneer as what you did here ?
Can I do the work with a J2534 of Autel and a laptop?
I wish. I tried everything I had including VXdiag, Autel, and Xtool VCI and nothing worked. This stupid car is the reason I spent $2K on the Cardaq 3+. I don't regret it.
@@markmccormickkeysvas6154 or mangoos i believe
Autel im608 list this auto. If it’s a grand Cherokee if it’s a wagoner it’s not listed. Is this a new system that’s not supported by them or some other machine? 2-2-24
Autel doesn't work in my experience.
Did you use the 12-8 connector cables, to connect to observe? Where were they under glovebox area?
Nope. JL is a new platform. No aftermarket tools work on this.
@@markmccormickkeys Thanks for the video and information, I have a 2024 Grand Cherokee, could not find the 12-8 connector, now I know why, it is not there!
So let’s say I’m using a Supergoose from Opus IVS (Drew Technologies). Would I just go thru Stellantis to get my PIN code?
I'm unaware of the Supergoose. It looks promising. Do you know if it works with WiTech? If it does, you should be good to go.stellantisiop.com/iop/app/landing
Never mentioned if you had to buy the MicroPod? Were you able to just use the CarDaq?
No need for the Micropod. The Cardaq 3+ works great on these. Autel VCI will not work.
You sell the pin
pin code??
I'm sorry, no.
Did you manage to get the pine my friend. I need it as well please
Have you tried a different VCI? I don't want to drop 1.5k on a CarDAQ for newer Chrysler vehicles.
Yes, the only one I found that works is the Cardaq or Micropod. I didn't want to spend either.
@@markmccormickkeys I see that WiTech has VIN subscriptions, is this required? Can it be used in place of the two subscriptions?
@@TannerBugatti I hope that's true but in my experience you have to buy the vin subscription plus tech authority and PIN code. Let me know if you find out this is not the case. Thanks.
Mangoose 3 plus well work
Can we use obdstar?
No way.
What’s the total Cost to get set up as you are if you don’t mind Me Asking? Do you have a good website to purchase CarDaq 3 from?
Amazon for the Cardaq. Nastf is through the company I work for. Plus the laptop. 3K minimum plus a few headaches along the way.
Did you manage to get the pine my friend. I need it as well please
$30 for pin, $50 for WiTech 3 day, $37 for Tech Authority 3 day... you answered this to another person here. How can I get it? I am in Venezuela south america, Do I have to use a VPN?
NASTF. Do you have it?
hello friend, sorry I didnt see your answer,,, I already have cardag plus 3, aftermarket dealer account with witech and tech authority, just need the NASTF. can you get it?@@markmccormickkeys
I have followed all your recomendations on the video, I have jeep grand cherokee 2023 AKL
Plz send me contact
You sell the pin? Your contac please
I'm sorry, no.
I need to do a Jeep grand cherokee 2023 AKL. Can you support us?
Yes. Do all the things in the video. I assume it's similar but I haven't done one ask yet. Did you do the things in the video?
i have the j2534 CANFD but I need the account for witech 2.0 . I need a way to get it. How did you get it my friend?
Cool, do you have NASTF?
I dont my friend. can you get it for me please?@@markmccormickkeys
No my friend I am trying to get it yet@@markmccormickkeys
Thanks for this!
Im a nastf member. What website did you go to get the PIN code to program?
stellantisiop.com/iop/app/secure/dashboard
Did you manage to get the pine my friend. I need it as well please
@@dashtyATG you go to the link he provided , tap on the model (jeep,fiat, etc.) then at the top of the website you click on key code
@@dashtyATG after that make sure at the very bottom you sign in to nastf then click on “key code launch “
Happy New Year,Question do i have to buy a 3 day subscription to be able to buy the pin?
Great video Mark! Have you done any with unlocked used OEM keys yet? One of my dealers tried a while ago and it said the fob was already programmed to another vehicle. When I read them they said unlocked. Just curious. Thanks.
I'm unaware of anyone unlocking these. I'll try to find out more information and report back asap. Thanks for the compliments.
I should also mention: reading chip status is often hit or miss on many newer smart keys in my experience.
hello. how can I contact you?
You just did. Hello.
Yep my locksmith friend is charging 750 for this key- I see why
I ageee.
Brother, how can I contact you?
You just did! What's up?
@@markmccormickkeys I would like to ask about PIN code from where can I get that
Price of pin code?
$30 for pin, $50 for WiTech 3 day, $37 for Tech Authority 3 day.
Where did you buy pincode I tried to got dealer provided pin code but did not work @@markmccormickkeys
Very helpful thank you 👍🙏
Glad it was helpful!
OBD ports?
Yes!
www.bestkeysupply.com/products/jeep-grand-cherokee-5button-m3nwxf0b1-oem1732?ref=xswjodc8
ua-cam.com/video/kSkICNBBM9k/v-deo.htmlsi=BknnG16JQK_Jxkaj
TOTAL BULL CRAP TRY ANOTHER VIDEO
I promise I did the job. No edits. My intention was to help others out. I'm sorry you feel this way.
This guy is a troll. This video is legit. Thanks for the info.