'It's a Glock, it's perfect', continues to change out every single thing that could possibly be changed. I love Glock fan boys. 😂 Sweet piece regardless.
Some people change parts because they can. The market supports Glock and some people have the money to invest in their hobby and some people hate, usually the ones who don’t have the money
Tate Craft slowing it to 1/4 speed doesn’t help. It’s still pretty much worthless as a how to. If you are going to waste viewer time, why not spend 10-15 seconds showing the stippling for a small area then do 20x for the rest.
I like the snake-like pattern. With the rough edges around the Glock logo on the left grip panel, I'd probably just go ahead and stipple that section too. And I would definitely cerakote the the whole grip to get a uniform color so that any rough edges between the sanded or stippled areas and the untouched areas would disappear.
Love the pattern. Love the lines. That Glock emblem though, especially because it’s green, looks very messy. If you just got rid of it and stippled over that as well it would be perfect. Just my opinion.
I gotta know.. What do you hunt with a 40 S&W?? I could see a 10mm being used for hunting but not it's neutered little brother the 40.. I will have to say that I also thought the color of the FDE & OD Glocks went clean thru.. Wow they are ceracoating them instead.. I also want an OD G26 but after seeing that the frame is painted I think I'll have to pass.. And now after reading the comment below I now know what you hunt with the 40 = Smart Asses..
Nice work, however, the only parts you really need to improve the trigger is the lighter firing pin spring, a 3.5 connector and the rounded safety plunger with a lighter spring. About $30 in total.
Raftika wood burner came from Walmart or any craft store. The Micro air die grinder came from harbor freight, you could also use a dremel if you don’t have a compressor.
Soldier For Christ Thanks. I’ve often wondered what it would look like with just a black slide. I need to borrow one my friends 19s and see what I think about it. Awesome screen name btw!
Devin Hartlage thanks I appreciate that. Unfortunately I make my own tips for the pattern that you see in this video. However the gator pattern I use a small “chisel” tip laid on its side. I hope that info is helpful.
I have a genuine question: In a previous video, you used a wood carving tool to create one of the CLEANEST borders I've seen on any youtube video. Now almost two months later, you appear to use either your rotary tool or soldering iron to create your outline. The previous one looks far nicer than this one. Why did you switch up your methods? Genuinely not talking shit like some, I appreciate your tutorials for giving me ideas that I didn't think of...
@@tristarcustoms77 Oh snaps, I saw January and assumed this year. Sorry about that! And, Kudos to you for figuring out better methods =) I'm in the middle of stippling my frame, and I'm heading out to buy one of those v shaped wood gouging tools lol
Stefano Bono I draw them out with a straight edge. Then cut the line with a sharp hot iron. Then follow those cut line with engraving tools for the border.
Please tell me you left it black! Got a 19x, do you do any stippling work for people? I'm to scared to attempt stippling myself lol too cheap to shell out money for another frame if I mess it up.
Ryan Hendley yes I am. You can message me on Facebook or Instagram you can find the details for that in the description also you can reach me at (606)499-771one
Absolutely. I do it every week. Contact me for more information on Facebook or Instagram @TristarCustoms or if your not on social media can be emailed at tristarcustoms.tn@gmail.com
GlocksNthings this is something I considered doing but the high cost of glock frames along with the wide variety stippling patterns and options offered just makes this unwise business decision on my end.
Randy Vertrees hey man thanks for the feedback! I can’t remember the brand but it is a wood burning iron, and I make my own tips I start with a factory tip and modify it to suit my needs. The rotary tool is a micro air die grinder and I use dremel style attachments. I use the sanding drum quite a bit.
@@tristarcustoms77 Sorry for my question, but the black color on green glock frame how can you obtained? Thanks! I would like the same effect on my Glock 19x, black grip on Tan frame...
Hunter the German Shepherd he’s a local guy so I don’t think that particular song is available for download anywhere I’ll talk to him and see if there’s a way you can get it.
Brother, I need to know the song you play in your time-lapses; please! I tried to find it without success. Could you please help a Brother out who loves good music? Many thanks!!
Dr. Brian Hoffman the song is “Goin’ Home” by my good buddy Ken Wilson. I’m not sure if you can find it online anywhere but I’ll try to find out for you.
I know the GlockStore (and probably countless other places) does Cerakoting. I've had guns Cerakoted and it is an excellent finish - much better than Duracoat. It's very hard and I believe the X guns are factory Cerakoted.
What did you do to the trigger guard?!🤮 I prefer my Glock stock but if I were to have the frame done I would have it done by laser. And you are more likely to have issues putting after market parts in your gun.
Glock's are decent tools. CZ's are amazing tools with many features glock's should have. Glock grip angles, finger grooves, and palm swells are not ergonomic and very annoying for me. The only factory Glock lowers I own are a 20/21 and a 29 frame, because Spectre doesn't make a lower for 10mm. Have a 19, 23, and 27 with Spectres' polymer80 v2 frames. Like them a lot, still not as accurate, or as nice as my cz sp01, 97bd, and Shadow 2. Really really wish cz offered a 10mm!
@J M Find me some pictures of CZ's with blown apart slides and frames. I'm sure there are a couple. Now go shoot a bunch of reloads through your glock with its unsupported chamber. Either or, I will wait.
pros and cons of stippling... all it does is 'cook' the synthetics... a crust 'rises' and there is left a series of small 'valley's' . just try this... take a small knife and simply knock off the snots that are elevated above the plain of the surface. they are turned into dried out crusty shit. they pop right off. if you remove all of them... you'll have remaining small valleys that are set into the frame material. now that in itself has a good look to it.. however... allot of frame material, due to stippling with a heat gun/tool/point etc is permanently lost
Unless competition shooting I just don’t get the point of stripping your pistol and putting all new parts in it? And after all that left the crappy stock sights. And no I’m not hating, just my observations and opinion
Are people really referring to the marked outline borders as "rough" lol? Acetone or alcohol to remove the drawn on borders and it (the borders) won't look as rigid. Looks good! I would however, add some more stippling at the index points. Looks unfinished, in my opinion. Personally, I dig the stipple style. Reminds me of the good ol' rattlers we have here in South Texas haha! On a side note, I feel like people make UA-cam accounts for the sole purpose of crapping on other folks' videos just to feel better about themselves. Jeeeez!
Arthur G I appreciate feedback like this man. I’m usually tempted to reply to the hate comments but I’ve decided some people just live a miserable life to be so negative lol I’ve actually made a few changes to this gun, and I’d post an update video but this particular glock is at the bottom of a river at the moment 😒. Long story. I’ve also changed the way I do my borders as well which I’ll post in my next video.
@@tristarcustoms77 No prob! Looking towards the new video. Bummer that the gun is at the bottom of the river. A snorkel set and an underwater metal detector on hand for such situations would be handy haha! There's videos of folks finding all kinds of goods at the bottom of rivers. Wouldn't doubt if someone finds your Glock sooner or later.
@@tristarcustoms77 I'll pass..... I'll try and post up a picture of frame modifications and stippling work....if this is an old video can you link any recent work???
Shootasaurus Rex look me up on Instagram at tnt_customs_division you’ll see a lot of stuff. I’m actually about a week away from having my FFL for my new shop so I’m hoping to turn out some new videos after that
No I left the color scheme the same. I haven’t mentioned it on here yet that I can remember but this gun has actually been at the bottom of a river for almost two years now 😔😅 lol
ESt Oak Well I’m glad to be of some inspiration! Haha yeh I went kayak fishing on the river when it was too high and fast.. lesson learned. It’ll make an epic video though if ever make time to go look for it and actually find it lol
Jordan Ballew either way its a nice gun i havnt been a fan of glocks but the glock19 from what i hear is one of the smaller clocks at least with the amount of rounds in a mag that it has which is why i wanted one for concealed carry
Xboxblowz 1011 it was depressing there for a while... This month makes two full years that it’s been there. I’d like to go back and look for it. It would make a killer video
thanks for the tips. heads up tungsten is heavier than steel . it is designed to reduce muzzle rise
I agree with your decision to not cerakote the pistol.The black contrasts handsomely with the green, excellent choice.Looks awesome.
"In case i have to defend my life underwater"...
...I'm dead😂...
C. Remmington haha I’m glad you appreciate the sarcasm!
Lol
I got a good laugh out of that too.
I had to rewind that shit make sure i heard it correctly 🤣🤣🤣
'It's a Glock, it's perfect', continues to change out every single thing that could possibly be changed. I love Glock fan boys. 😂
Sweet piece regardless.
Mike Justice, I guess Gaston didn’t think “Glock adequacy” had the same ring to it.😂
Some people change parts because they can. The market supports Glock and some people have the money to invest in their hobby and some people hate, usually the ones who don’t have the money
Texas Ghost not really, imagine buying the “perfect home” but having to dump 100 grand into it lol to make it “more perfect.”
Lots of 1911 guys do the same thing..
Glocks are perfect the same way that a Honda Civic is perfect. Basically it lasts forever and gets the job done lol
"Why do you run Glocks?" *Proceeds to shoot and target and hit one time*
While filming.
I love how reliable Glocks are.
Precedes to change every component possible. 🤣
That's some rough borders, but nice stippling. good job.
Keep the tri-color. The black green gold work well together plus it sets off the stippling.
Man that came out super nice! Makes me want to DIY stippling my 19 as well.
It would have been nice to show how you actually did the stippling, not at 20x. It looks great.
Mike Zaloudek exactly so fucking stupid to do it 20x speed so you can’t see his technique
Joseph Langone you do realize you can slow the video down, right? 🙄
Tate Craft slowing it to 1/4 speed doesn’t help. It’s still pretty much worthless as a how to. If you are going to waste viewer time, why not spend 10-15 seconds showing the stippling for a small area then do 20x for the rest.
You didn't read the description did you...
I like the snake-like pattern. With the rough edges around the Glock logo on the left grip panel, I'd probably just go ahead and stipple that section too. And I would definitely cerakote the the whole grip to get a uniform color so that any rough edges between the sanded or stippled areas and the untouched areas would disappear.
Glocks much like Harleys can be unique and stand out if left stock. But looks great, needs a ride to Gun Week!
Should do a vid on stipple techniques and designs. Turned out really nice!
Michael Vazquez I’ve got a video for that filmed! I’m in the editing process right now hopefully I’ll have it uploaded by next week
That is awesome. I'd love see it when it's up. Thanks man!! 👍
@@tristarcustoms77 did you upload a vid on how to do thia pattern? Its amazing and would like to do on my g19
that alligator pattern looks really good on the main parts of the gun but it looks weird on the accelerator cuts and the under cut.
Nice job. I like it but the only issue I see is the boarders. It's rough, you could've spent a little extra time and cleaned em up.
Love the pattern. Love the lines. That Glock emblem though, especially because it’s green, looks very messy. If you just got rid of it and stippled over that as well it would be perfect. Just my opinion.
Strike while the irons hot! Fantastic, definitely snake like, looks great, good work.
skylark thank you! Much appreciated!
That stippling is badass!!!
Wanted to see procedure but wasnt possible at the warp speed video. I was bummed to see it ffwd so much.
How could a person take a tan glock frame and make the stipple black
You have to stipple the frame first, the tape off everything but the stippled area then paint it black.. I’ve done it before in grey frames
How many watts is your Iron? and I can't find an iron that short here in the Philippines. Do you sell the tips you used?
25 Watts I think. I do not sell the tips.
@@tristarcustoms77 Imma need to do some experimental tips then and check the outcomes! Thanks for the reply!
I gotta know.. What do you hunt with a 40 S&W?? I could see a 10mm being used for hunting but not it's neutered little brother the 40.. I will have to say that I also thought the color of the FDE & OD Glocks went clean thru.. Wow they are ceracoating them instead.. I also want an OD G26 but after seeing that the frame is painted I think I'll have to pass.. And now after reading the comment below I now know what you hunt with the 40 = Smart Asses..
The glock 40 is a 10mm.
Plenty of guys shooting hogs with 40 cal on here if you search
That design is so clean
what tip are you using to ahcieve the viper pattern
@@connerenglish2820 I make it. It’s basically a triangle shape with one side having a radius. Start with a round tip and grind it to the desired shape
Nice work, however, the only parts you really need to improve the trigger is the lighter firing pin spring, a 3.5 connector and the rounded safety plunger with a lighter spring. About $30 in total.
Sueweeet ! That’s what’s up brother! That is a great pistol.
My is the same way. I bought the 26 and it’s a paint too. I thought it was the full polymer but it’s painted.
It's beautiful how does it feel and work?
Christopher Bernadel it worked and felt excellent before I lost it in the river lol
Beautiful work brother!
christian Hancock thank you!
Where can I buy the tools you used to do this?
Raftika wood burner came from Walmart or any craft store. The Micro air die grinder came from harbor freight, you could also use a dremel if you don’t have a compressor.
Tristar Customs can you do this again but put the camera focus on your stippling work?
What's the cost to get that viper job done on a p80, the same as the glock on the video? I'm interested in getting it done.
Nice looking gun. I wouldnt cerakote it either but I think the original black slide would look better with that green frame. Good video.
Soldier For Christ Thanks. I’ve often wondered what it would look like with just a black slide. I need to borrow one my friends 19s and see what I think about it. Awesome screen name btw!
Boy oh boy that’s one hell of a craft...
What type of tips are you using to do your gator scales and you raptor scales awesome work man great job
Devin Hartlage thanks I appreciate that. Unfortunately I make my own tips for the pattern that you see in this video. However the gator pattern I use a small “chisel” tip laid on its side. I hope that info is helpful.
@@tristarcustoms77 thanks again for the info man great work and video again.
I have a genuine question:
In a previous video, you used a wood carving tool to create one of the CLEANEST borders I've seen on any youtube video. Now almost two months later, you appear to use either your rotary tool or soldering iron to create your outline. The previous one looks far nicer than this one. Why did you switch up your methods?
Genuinely not talking shit like some, I appreciate your tutorials for giving me ideas that I didn't think of...
Ahmed Fahmy you watched the videos out of order my man.
@@tristarcustoms77 Oh snaps, I saw January and assumed this year. Sorry about that! And, Kudos to you for figuring out better methods =) I'm in the middle of stippling my frame, and I'm heading out to buy one of those v shaped wood gouging tools lol
Ahmed Fahmy thanks I appreciate it. And I actually use a shallow u-gouge.
Ahmed Fahmy I order them from eBay or amazon whichever has them cheaper
How did you get such straight lines.
Stefano Bono I draw them out with a straight edge. Then cut the line with a sharp hot iron. Then follow those cut line with engraving tools for the border.
Please tell me you left it black! Got a 19x, do you do any stippling work for people? I'm to scared to attempt stippling myself lol too cheap to shell out money for another frame if I mess it up.
lol read the info and watched the whole vid....I'll be reaching out if this pandemic dies down and y'all taking orders
Also might try and highlight the Glock logo on the slide with black paint...in use restore....works out great
Testors...not restore...lol
Are you still working firearms? I do not know how to get in contact with you, would love for you to work on a couple of my glocks
Ryan Hendley yes I am. You can message me on Facebook or Instagram you can find the details for that in the description also you can reach me at (606)499-771one
I really like that texturing. That's nice.
Glock does not color mold it's polymer. I'm a pro cerakote applicator. Enjoy the different looks that can be created. great stippling.
Mike Robertson thanks for the info! I appreciate the feedback.
That is not true. Glock has made polymer colors. Grey, tan for 19x, and an od green in limited release.
Tell that to my undercut, finger-groove-less FDE two-tone G19 Gen 4. It was FDE all the way through.
Have you done a dragon scale one?
abel rougemont send me a picture of it please.
Awesome Work! Love your videos. I'm new to your channel. God Bless You Brother!
Daniel Cronon thanks man much appreciated! Glory to God!
Do you do this if some one mailed you something
Absolutely. I do it every week. Contact me for more information on Facebook or Instagram @TristarCustoms or if your not on social media can be emailed at tristarcustoms.tn@gmail.com
What tip are you using ?
I made it
Would you be able to show me a pic?
@@gustavoargueta5811 yeh shoot me an email which you can find in the description or find me on Instagram or Facebook
Black is awsome and do u have any gen 4!stripped 19/23/32 frames that u offer for sale already stippled
GlocksNthings this is something I considered doing but the high cost of glock frames along with the wide variety stippling patterns and options offered just makes this unwise business decision on my end.
What Iron and tips are you using.. Also which rotary took and attachment is that?
Randy Vertrees hey man thanks for the feedback! I can’t remember the brand but it is a wood burning iron, and I make my own tips I start with a factory tip and modify it to suit my needs. The rotary tool is a micro air die grinder and I use dremel style attachments. I use the sanding drum quite a bit.
Great upgrade, dude!
Thanks man!
@@tristarcustoms77 Sorry for my question, but the black color on green glock frame how can you obtained? Thanks!
I would like the same effect on my Glock 19x, black grip on Tan frame...
Well good music! And its cold outside! lol Nice video!
Cody Monroe thanks man I appreciate it!!
I’m surprised you did all of those upgrades for the trigger assembly but didn’t polish the trigger bar, connector, plunger... etc. nicely done though.
My Glock is like my Wrangler...I have so many options to customize them to how I want them to be...
Bo Jackson exactly! Make it however you want it brother!
Help me out i cant fine this song anywhere who’s the singer and song called? Thanks and like your video
Can i buy this tip
"Gotta represent the Faith." Awesome!
Zeno916 you got it! Only thing that really matters
That is a work of art.great job.
John Allen thanks man!
What tip did you use?
Sylthaya I make the tips that I use
Can we see pic of the tip u used
What was the name of that song??
Hunter the German Shepherd “Goin’ Home” by Ken Wilson
Cumberland Gap Tactical can’t find it for some reason
Hunter the German Shepherd he’s a local guy so I don’t think that particular song is available for download anywhere I’ll talk to him and see if there’s a way you can get it.
I am looking for a very aggressive stippling job on my 19x what would you recommend?
NAF Solutions
Brother, I need to know the song you play in your time-lapses; please! I tried to find it without success. Could you please help a Brother out who loves good music? Many thanks!!
Dr. Brian Hoffman the song is “Goin’ Home” by my good buddy Ken Wilson. I’m not sure if you can find it online anywhere but I’ll try to find out for you.
are the factory green frame glocks cerakoted or green plastic? im wanting one but assumed they were green dyed polymer. anyone know?
I know the GlockStore (and probably countless other places) does Cerakoting. I've had guns Cerakoted and it is an excellent finish - much better than Duracoat. It's very hard and I believe the X guns are factory Cerakoted.
820hurleyj they are factory cerakoted, but all other glock frames are black polymer.
So perfection equals a company making it better over and over ?
What did you do to the trigger guard?!🤮 I prefer my Glock stock but if I were to have the frame done I would have it done by laser. And you are more likely to have issues putting after market parts in your gun.
I like the tri-tone
Line work 4 stipple 7 overall video 10
Looks Sharp!!
What kind of tool did you use to grind off the factory/ green coating?
Pastor Doogie it’s a micro air die grinder. And I use a dremel style sanding drum.
its good for your personal tool in your toolbox but you couldn’t sell me that work just too messy for paid custom work
I agree. Those lines are anything but straight, and that trigger guard is something else. But for personal use that's a pretty good job
Of everything to not upgrade you chose the plastic sights... vro.
You messed up on the undercut
Hi!!!!!!its rowen!!!!!!love your channel!!!!!!!
love your work
Glock's are decent tools. CZ's are amazing tools with many features glock's should have. Glock grip angles, finger grooves, and palm swells are not ergonomic and very annoying for me. The only factory Glock lowers I own are a 20/21 and a 29 frame, because Spectre doesn't make a lower for 10mm. Have a 19, 23, and 27 with Spectres' polymer80 v2 frames. Like them a lot, still not as accurate, or as nice as my cz sp01, 97bd, and Shadow 2. Really really wish cz offered a 10mm!
@J M Find me some pictures of CZ's with blown apart slides and frames. I'm sure there are a couple. Now go shoot a bunch of reloads through your glock with its unsupported chamber. Either or, I will wait.
Im not a glock guy but i do like that stipiling job. Would be nice on a 43
Bakken Cutter I’ll hook you up man.
Got to take your time on the edges buddy. I like the design but just some feedback.
Anthony Pritchard thanks man. This a old video and have since changed my border techniques. Thanks for the feedback!
Tristar Customs I’m either using the wrong bit or my rpm’s are wrong. Any vid on how you’re doing borders now?
What song is that?
Z marchal the name of the song is “Fear” by Ken Wilson. He’s a local artist and good friend of mine.
Great work. Next time I head to Norris I’m going to look you up. Got a 26 that needs stippling
Eric Ison sounds great! I’ll take care of it for you.
pros and cons of stippling... all it does is 'cook' the synthetics... a crust 'rises' and there is left a series of small 'valley's' . just try this... take a small knife and simply knock off the snots that are elevated above the plain of the surface. they are turned into dried out crusty shit. they pop right off. if you remove all of them... you'll have remaining small valleys that are set into the frame material. now that in itself has a good look to it.. however... allot of frame material, due to stippling with a heat gun/tool/point etc is permanently lost
Glock perfection remove every glock part put the frame, ahhh perfection
my favorite mod yet WTG
Unless competition shooting I just don’t get the point of stripping your pistol and putting all new parts in it? And after all that left the crappy stock sights. And no I’m not hating, just my observations and opinion
Are people really referring to the marked outline borders as "rough" lol?
Acetone or alcohol to remove the drawn on borders and it (the borders) won't look as rigid.
Looks good! I would however, add some more stippling at the index points. Looks unfinished, in my opinion.
Personally, I dig the stipple style. Reminds me of the good ol' rattlers we have here in South Texas haha!
On a side note, I feel like people make UA-cam accounts for the sole purpose of crapping on other folks' videos just to feel better about themselves. Jeeeez!
Arthur G I appreciate feedback like this man. I’m usually tempted to reply to the hate comments but I’ve decided some people just live a miserable life to be so negative lol I’ve actually made a few changes to this gun, and I’d post an update video but this particular glock is at the bottom of a river at the moment 😒. Long story. I’ve also changed the way I do my borders as well which I’ll post in my next video.
@@tristarcustoms77 No prob! Looking towards the new video.
Bummer that the gun is at the bottom of the river. A snorkel set and an underwater metal detector on hand for such situations would be handy haha!
There's videos of folks finding all kinds of goods at the bottom of rivers. Wouldn't doubt if someone finds your Glock sooner or later.
I DNT usually like stiple jobs but this one looks pretty good you should teach Robbie weaten at weaten arms how to do this right
Y would you fast forward in the part thats where we need to know how to do it. Allot of talking and no useful information
Absolutely!!
Nice ass work! I would keep the tri-color myself
jason brown thanks I appreciate it!
that's sick AF!!
Who cut those borders? Stevie Wonder?
Should have used some extra money to replace the factory sights which are awful, made of plastic and I've seen them break
Take it a step further a stipple the pierce extension
patellis09 I would stipple the extension but I use that mag in other guns so then it wouldn’t really match.
I truly have gun envy now....
Are you gun shy? Lol
Can't believe someone would pay money for those sloppy borders!
Garry Felton this was before I learned new techniques for borders .. I agree they are pretty sloppy look at some of my other videos
Keep up the good work 👌
That's badass!!
Tungsten is not lighter weight..!!! Mucho more weight than the stainless rod....tungsten is GREAT on a mod 23 in 40 S&W..
John Getz yeh I misspoke
Lookin good.Would look bad ass if you micro stipple your Glock logo...I do it on my ruger bx25 mags works out great..
Great video love the music used too and your accent is cool as fuck,all the best from an Englishman
Beautiful Pistol, I Love the Colors.
So you like Glocks because they will eat a Slushy with you on a cold day? Lol
MoT0R He4D you got it man! Lol 😆
Damm I have to pay you to have my gun stippled like that???
lol it’s an old video but yes... yes you do
@@tristarcustoms77 I'll pass..... I'll try and post up a picture of frame modifications and stippling work....if this is an old video can you link any recent work???
Shootasaurus Rex look me up on Instagram at tnt_customs_division you’ll see a lot of stuff. I’m actually about a week away from having my FFL for my new shop so I’m hoping to turn out some new videos after that
TNT tactical is closed now....
Greg Kerns ....yes?
@@tristarcustoms77 I live close to morristown...and was up that way a while back an I didnt know they shutdown.. ha it's a small world! Good work bro
Greg Kerns lol no doubt.. I appreciate it. Thanks for watching.
@@tristarcustoms77 you're welcome, let me know when you get your FFL and or a shop open. I'll swing by an check it out 👍
Greg Kerns will do man! I’m just playing the waiting game with the ATF right now lol
Hope you didn’t re-cerakote 🤤
No I left the color scheme the same. I haven’t mentioned it on here yet that I can remember but this gun has actually been at the bottom of a river for almost two years now 😔😅 lol
Jordan Ballew well you’ve inspired me to do something very similar! Except for the river part of course, unless it was in a boating accident 😆
ESt Oak Well I’m glad to be of some inspiration! Haha yeh I went kayak fishing on the river when it was too high and fast.. lesson learned. It’ll make an epic video though if ever make time to go look for it and actually find it lol
Perfecting perfection was already accomplished by CZ.
Lmfao, your a funny guy
i think you should have just built the glock 😂 buy the upper and lower and then added the parts that you did
Xboxblowz 1011 lol yeh that’s what I’ve started doing since then. In hindsight I would have changed a ton of things I did in this video lol
Jordan Ballew either way its a nice gun i havnt been a fan of glocks but the glock19 from what i hear is one of the smaller clocks at least with the amount of rounds in a mag that it has which is why i wanted one for concealed carry
Xboxblowz 1011 oh definitely. I’d still be carrying that gun today if I hadn’t lost it in the river 😂
Jordan Ballew sorry to hear that at least there fairly cheap but still 500-600 dollars minimum isnt all to fun to lose haha
Xboxblowz 1011 it was depressing there for a while... This month makes two full years that it’s been there. I’d like to go back and look for it. It would make a killer video