CRAFTSMAN R110 Riding Lawn Mower

Поділитися
Вставка
  • Опубліковано 28 сер 2024
  • Quick review of a clients riding mower, 2019 model year, machine was left outside for at least 8 months. fuel system was full of water and debris, engine was severely overfilled with oil, after correcting all of these issues it is now running like a top ready to be returned to our client.
    moral of story, do not leave your machine outside not covered up, if you want to leave your machine outside get 2 15x15 foot tarps, lay one on ground, ride mower onto the tarp, then use second one to cover top of machine, this allows machine to stay as dry as possible out side, plus use heavy bricks on each corner to keep tarp on machine.
    #craftsman
    #craftsmanr110
    #r110ridingmower

КОМЕНТАРІ • 119

  • @markshuput5228
    @markshuput5228 Рік тому +6

    I've had mine since 2017. Every fall, I deep clean and service this unit and have never had an issue with it. Great machine, and I take good care of it.

    • @randalltanner9316
      @randalltanner9316 5 місяців тому +1

      I checked out my mower this winter,fixed steering and lube the assets cut the grass. Already

    • @paulmysliborski4832
      @paulmysliborski4832 2 місяці тому

      Same here. Religious maintenance, and mine works like new. I have the Powermore 382cc on mine. (Better than the Briggs 344cc IMO.).

  • @rapidsqualor5367
    @rapidsqualor5367 2 роки тому +4

    I have one of these. This design has many name plates, including Troy-Bilt and Cub Cadet. Mine was purchased in 2017 and is a Craftsman R1000 . At 2:00 into this video, the machine will not run without something there. There is a button/lockout the chute depresses. At 6:05 the battery tray & hold-down can get rusty but replacements are available.
    At 7:17 in the video is the mowers biggest weakness, it's stamped deck. See what that spring attaches to ? That engages the blade. It pivots on that nut and pushes the blade brake away while a pulley tensions the deck belt. If rust weakens the pivot hole in the deck you lose the ability to engage the blade. I'm on my third deck. I also rebuilt the steering. No problems with engine or electrical (other than new battery). It's modded to cut in reverse. When it finally dies, I'm going to buy the same design. Perfect size for 1/2 acre, great mower.

  • @rrad8106
    @rrad8106 3 роки тому +7

    Bought on in March of this year and I love it! We have a small, sloped lot and it has no issues with hauling my girth (320lbs) around. We're into November now, and I am primarily using it for mulching in leaves. Use it weekly; have not hit any issues with it at all.

  • @derekbowe1532
    @derekbowe1532 5 місяців тому +1

    Thanks for the very informative video! Needed it before I hop on my R110 for the season.🙂

  • @stansmad
    @stansmad 2 роки тому +3

    Bought mine basically brand new about 2 years ago from a fellow who took it in on a trade. He only used it 3 times as his yard was too small for a rider. Got it for $500 and I love it ! 😀 My yard is small but was tired of pushing. Also somewhat sloped so I have to be creative while mowing. It has been flawless so far. Would recommend to anyone with a smaller area.

  • @mr.ponstan7522
    @mr.ponstan7522 3 роки тому +2

    Thanks for the video. It is very useful for me. I enjoyed using the mower today. Using a walk behind was getting to be too much to cut the whole area I have. Without this video I would've been walking. Thanks again.

  • @genevievevalle3286
    @genevievevalle3286 4 роки тому +2

    Thank you for showing how to turn the mower on I know nothing about riding mowers so this tutorial was great. Thanks 😊

  • @johndoran1754
    @johndoran1754 3 роки тому +5

    Got one a couple months ago, highly recommended

  • @TanNguyen-ge8wx
    @TanNguyen-ge8wx 4 роки тому +6

    Dear friend, after. I had trouble I learned, when someone bought Craftman R110 or R100 same model. If you started not working, you needed to check on PTO ( Blade Engage ) Lever go Down ( up < * ) it's not start (* >reverse Down, it's Star ) if you don't do that, it's won't Start and you needed push Clutch/Brake Pedal so harder, will start.

  • @jordanjohnson5784
    @jordanjohnson5784 3 роки тому +1

    Good info. Nice overview/review. I appreciate you taking the time to go over this machine. I am thinking about buying one.

    • @dontupdateifitworks.424
      @dontupdateifitworks.424 2 роки тому

      WAIT TIL JOEY & " HUNTER: MANDATE ELECTRIC : & GET A USED ABANDON SHEEP ELETRIC $7,000.00 BUYER?
      UNLESS THE AS AD THEM TO THE AK-47 'S LAWS? 😭💸🤬💉☠️ GAS? GOOD LUCK?
      For our children , their children & their children's children!
      Global warming? Catalytic converters next & a propeller on our helmets! Solar cell : flight suits" & solar covers you must push them out of the garage or climb up & down from the roof? 😵‍💫😂🛐🛑😠😡🫣😫🔥⚰️

  • @baileyfrazier2635
    @baileyfrazier2635 2 роки тому +2

    Not a bad little mower for the money and for small yards.A major defect and continuing problem is the steering gears are poor quality.They consist of sproket and comb like gear plate are very soft and wear down quickly and the steering wheel loses control.

  • @spookerr
    @spookerr 2 роки тому +1

    I had mine model 29900 for about 5 years now. So far so good. But I keep it inside the garage and treat it as best as I can.

  • @william38022
    @william38022 4 роки тому +4

    I just bought this mower from Lowes about a week ago I have two narrow gateways to go through between two different properties so it is very convenient however it does have its issues I would like to see the gearshifter moved off to the side,,,right between your legs is a pain and the more you use the gear shifter going between forward reverse the more the knob starts to work off of the gear shifter and you have to push it back down,,, it will pop if I decelerate quickly through the muffler and the steering has no return whatsoever making tight turns

  • @cast_cal
    @cast_cal 2 роки тому +6

    R110: How To mow in Reverse, blades engaged, WITHOUT disconnecting wires! OKAY, put it in Neutral, brake pedal engaged. Start the engine as normal. Before you move an inch, turn the key from GREEN 🟢 to YELLOW 🟡 "R ➡️ F" mode. Which is "Reverse to Forward" mode, press the YELLOW triangle⚠️ , a light comes on. Keep It On Yellow 💛 for your entire mowing session! Now, to go Forward, press your foot break down, put it in Forward gear on the knob under your seat (blades engaged or not), key remains in YELLOW 💛, you are moving Forward. Then when you want to reverse, foot break down, put it in Reverse Gear on the knob under your seat (blades engaged or not), key remains in YELLOW 💛 , you are moving in Reverse. Since it's "not recommended", the directions are NOT clear. But no wire cutting ✂️ necessary. Enjoy 🚜 ⚠️💛 ⬅️➡️ 😊

  • @jonmcclane7433
    @jonmcclane7433 Рік тому

    Thanks Chris, I just bought this mower, and your video helped. Then I see you’re a Gun guy and like Combloc weapons. subscribed!

  • @bozenagamboa8120
    @bozenagamboa8120 4 роки тому +5

    After 29 days I'm returning to Lowe's the Craftsmen 30" mower. The break is very hard to press and while releasing it to drive to front or to back the mower is often standing up on the back 2 wheels. Very dangerous plus smallest uneven ground (less as 12% or lager hole in the ground) I felt as the machine will overturn. It's true that the price is very affordable, easy to maneuver front wheels but the shaft to change gear hard to reach if you are on uneven terrain because you need to balance with your body the mower to avoid flip over. Another experience is that even if I changed the gear from REVERSE to FRONT (while pressing break) the mower was going to reverse! It started to move to front after I once again pressed the break and released it.
    Please also note that if you purchase that mower with the store delivery, you can return the mower during 30 days from the date of purchase NOT delivery date. If you got Lowe's delivery 10 days after the date of purchase you are left with only 20 days to return it.

    • @maryboyd4918
      @maryboyd4918 2 роки тому

      Thanks for the info I just bought this and my slope is pretty steep and it says in the manual it’ll cut off going up slopes and to go in reverse if it cut off. I’m terrified of the thing tipping over because mine slopes on the south and east side so either way I’ll be cutting across the slopes not up and down.

  • @crystalfleming3081
    @crystalfleming3081 3 роки тому

    I am seriously excited. I had one GIVEN to me, and it's fixed ready to roll, except the front tires won't hold air. So, that I'm taking to get ordered tomorrow and I won't have to use the PHD mowers (push here dummy, thank you Auntie)

  • @frankwrogg2515
    @frankwrogg2515 Рік тому +1

    These newer ones have a smaller engine, and this week the craftsman model was twice what i paid in 2012.

  • @johnp1839
    @johnp1839 2 місяці тому

    Great video. With this mower can you change speeds while driving or do you need to break with the clutch before adjusting your speed? Thanks 😊

  • @MannyG32968
    @MannyG32968 4 роки тому +1

    Excellent review! Good info and especially on some of the issues with regards to having water in the tank and what happens when you disregard your machine!

  • @RobertSmith-mr3zh
    @RobertSmith-mr3zh 2 роки тому +1

    The only requirements to start the mower are #1 mow deck disengaged #2 clutch/brake pedal pressed. It can be set at any speed it does not need to be in park, it can be in forward or reverse and still start. Also, there is a middle position on the key that when placed there after starting, you can press the little yellow triangle, then the mower will mow in reverse without killing the engine. That mower should have died when he got off of it due to a safety switch under the seat, it must be defective or bypassed.

    • @Pete391
      @Pete391 11 місяців тому

      If you set the brake in park, the mower wont die if your not on the seat.....

  • @dontupdateifitworks.424
    @dontupdateifitworks.424 2 роки тому +1

    IF IT MOVES: LUBRICATE IT!
    IF IT DON'T: CLEAN & PAINT IT ( Got an leather guy to reapolster the seat - I never cut in the rain or left it out so why not! If he can do my 87 HD SEAT? WHY NOT?😀
    USE IT FOREVER!

  • @Minoradventures43
    @Minoradventures43 4 місяці тому

    This lawnmower is very easy to flip.

  • @craigortega1862
    @craigortega1862 2 роки тому +1

    Just bought one!! Can't wait to use it now!!!

  • @elsa840
    @elsa840 2 роки тому

    Helpful information. Maybe show how to drain the fluid and clean the carburetor 😁

  • @itiongo
    @itiongo 3 роки тому +1

    Very in depth review!

  • @jebucha
    @jebucha 4 роки тому +6

    How steep of an actual slope were you on when it kept losing traction? I'm considering buying on of these but we have fairly steep slopes on either side of our house because it's a walk-out basement. Seeing this makes me very leery of this model (or perhaps the small rear-engine models in general).

    • @whiskeylies4221
      @whiskeylies4221 4 роки тому

      I have this type of mower. I would not recommend for slopes but it cuts great on flat ground.

  • @charlessanders1342
    @charlessanders1342 4 роки тому +2

    I have basically same mower but in a Murray version has 10.5 briggs. No reverse mow button had to remove wire clip to mow in reverse. The mower works great and it very peppy and mine has popped a wheelie when I was in a rut and both back tires got traction. The mower fits in my shed Great as it has a 42" door. I put a extender handle on speed shifter so don't have to reach down so far to adjust speed. I paid $964 for it last spring '19 from walmart as they have since raised the price to $1164 since lowes and Home depot sells there's for $1199 which is priced to high for this mower. You can buy a troy bilt front engine 42" mower for $1299 Which would be a better bang for the buck.

  • @ericphillips6612
    @ericphillips6612 5 місяців тому

    I have the same R110, and I have lost 1st and 2nd speed. Works fine as long as 3+ is selected. Any ideas. Not service center in my area works on craftsman.

  • @rogerchanin6786
    @rogerchanin6786 4 роки тому

    I have the 04' one I like it a lot!

  • @ashleyjolly8840
    @ashleyjolly8840 2 роки тому

    Love this!! Super helpful!! I’ve had mine a couple months- do you know why the blade won’t engage ? It Used to and stopped doing it 🤦🏻‍♀️

  • @wiley210
    @wiley210 Рік тому

    Got a good question for you, please and thank you. I left my gas cap off and sat on the seat, felt like a blew a rock out from under the mower, it started but wouldn't move. My idler arm was broken??? Could I have caused that? ps LOL I am not heavy, 167 lbs. The gas lid actually had a red mark and a small area indented, and the grill under the seat had a small busted area on the circular part? Thank you,.
    Probably should of watched this video right after I purchased the mower, Thank you so very much, very helpful!!!

  • @eliang87
    @eliang87 4 роки тому +1

    Thank you

  • @bencannon6989
    @bencannon6989 2 роки тому +1

    can you put a bagger on this

  • @johnfrancis166
    @johnfrancis166 4 роки тому +2

    I have the same mower but with the Troy Bilt label. If I get off of the seat while the engine is running, a kill switch shuts off the engine for safety. Did you disable the kill switch on this machine? If so, you are disabling a safety feature for the operator. I really like this machine. I have had it for three seasons and it works very well for me. Thanks for the video.

    • @worddunlap
      @worddunlap Рік тому

      If you have it in Park (stop) with blade disengaged and in Neutral you can get off the seat with the engine still running.

  • @wendellcody2785
    @wendellcody2785 4 роки тому +2

    I am having a problem with my blade engaging, what causing that problem

  • @ccmoran1
    @ccmoran1 4 роки тому +3

    I've got the same mower but I have a distinct rattle that comes from the front when I engage the mower and mowing. The rattle goes away when the mower ia not engaged

    • @william38022
      @william38022 4 роки тому +1

      Not to sound sarcastic or anything however have you raised it up and looked under the deck to make sure nothings wrapped around the blade

    • @scstinger5
      @scstinger5 4 роки тому +1

      I had the same issue with mine. There is a chrome colored wire bracket that holds the blade belt in place if it happens to fall off. It’s between the frame and the cutting deck, one side of it hooks into the frame and the other side bolts onto the frame. In mine the bolt fell off or may have never been installed as it was always loud and rattled. I just installed a new bolt and washers that I had lying around and now it’s quieter then it’s ever been. There are pictures of where the bracket goes in the owners manual if you still have it.

  • @GarnettLeary
    @GarnettLeary 3 роки тому +1

    Liked year 1. Year 2 not so much. Cleaned carburetor, fresh fuel, fuel filter, air, etc.. runs a while then sounds like it’s idling up then shuts off. I don’t have the parts sticker under my seat. I have a book but doesn’t specify spark plug. I tried an E3-20 and it’s worse. What should I be using? I’m seriously debating taking this thing out with a shotgun and hiring someone. I absolutely hate this machine.

    • @johnbillings4111
      @johnbillings4111 3 роки тому

      If I was you I would replace the Briggs engine with a kohler as in my experience they are much better

    • @manofculture4945
      @manofculture4945 3 роки тому

      There could possibly be a bunch of garbage inside the gas lines or the gas tank that is clogging the gas from entering inside. Or it could be the gas tank cap that is clogged that does not let there be any pressure. Try to test the gas cap by taking it off when it’s about to shut off or use it without the cap for a while

  • @patsygardiner8999
    @patsygardiner8999 2 роки тому

    I have trouble with moving the gear from neutral to forward. So, I have to move it to forward when I'm off the machine, then start it while it's in forward. Doesn't want to go up a small sloped area, so I go down instead of up. Also, I had to have the break adjusted after using it 3 times. Otherwise, it has a nice cut. Question, can a snow blade be attached?

  • @kevinsears6346
    @kevinsears6346 Рік тому

    Can someone tell me where the hose from the air filter attaches? It came loose and I have no idea where to attach it. Fuel line is on just fine.

  • @nancyboucher476
    @nancyboucher476 2 роки тому

    I have this mower but purchased mine in @2015, the only difference I see is that I cannot reverse unless I disengage the cutter blade. Do you know if there is a way to over this so that I can mow in reverse?

  • @cecilgeorge1921
    @cecilgeorge1921 2 місяці тому

    Show how to remove left front spindle on R110

  • @user-dm6sq3lu1e
    @user-dm6sq3lu1e Рік тому

    I had my Craftsman Riding Mower for 2 years and now it won't start. Its just clicking. Do I need a new battery?

  • @TSyoyo
    @TSyoyo Рік тому

    Anybody know why this mower shakes when you engage the blade? I know there are many things that can cause this, just wondering if anyone else had this problem with this mower?

  • @MUDKIP1552
    @MUDKIP1552 4 роки тому

    Bought this last .. It's been a nightmare to learn how to use if you're used to a regular tractor lawn mower. if your upgrading from a 21 inch walk behind you will love it.. but issues continue today I backed it out changed from bagger to mulch now refuses to start. won''t even click ..battery good. but can't find anything for support on what's going on... spend the extra 200 buck and get something that will work with alot more attachments.

    • @Iflew727
      @Iflew727 4 роки тому +4

      I know at least some models have a kill switch sensor which must be depressed by either the bagger or the mulcher. The mulching plate might not be depressing it fully.

    • @georgedavis8557
      @georgedavis8557 4 роки тому

      Does anyone know howto clean the mower

    • @TanNguyen-ge8wx
      @TanNguyen-ge8wx 4 роки тому

      MUDKIP1552, me too, I brought go back to Lowers change 4 times, can't started, I didn't known how starter

  • @Ashtonbashton947
    @Ashtonbashton947 2 роки тому

    I have the 29000 series, battery won't hold a charge and need to replace. What battery can I replace it with. Sears says the battery for this mower is no longer available.

  • @clterry07
    @clterry07 Рік тому

    question : how do you adjust the speed control on that unit .. my unit is stuck in one gear .. thanks..

  • @marcielivingston9938
    @marcielivingston9938 2 роки тому

    does the transmission make winding noise when it goes forward and is there a weight limit ?

  • @varthdader6869
    @varthdader6869 Рік тому +1

    Has anyone modified the brake/clutch lever? To small for my foot.

    • @Patriottoo2
      @Patriottoo2 9 місяців тому

      I noticed the same problem, but have not added an improvement, yet. Size 8 pedal... size 13 foot.

  • @william38022
    @william38022 4 роки тому +2

    Have you had any issues with a pop or a backfire if you go from running idle all the way down to low idol quick

    • @tonynsx
      @tonynsx 4 роки тому +2

      Check your spark plug. Mine had the same issue but after replacing the spark plug; it’s running smooth.

  • @LadyBug.82
    @LadyBug.82 3 роки тому +1

    How do you clean under the deck?

  • @angelabradley9801
    @angelabradley9801 Рік тому

    🎉

  • @ceciliaball3509
    @ceciliaball3509 3 роки тому +1

    How Do You Remove The Battery From This Mower, It's On The Side And Locked In Place..So Low I Cant Figure Out How To Remove The Battery. Help Please.

    • @ceciliaball3509
      @ceciliaball3509 3 роки тому

      Please Tell Me How To Remove This Battery.

    • @fdavis1969
      @fdavis1969 3 роки тому

      @@ceciliaball3509 you need a socket wrench in order to remove the one screw holding the bar across the top in place. After that it comes right out.

    • @ceciliaball3509
      @ceciliaball3509 3 роки тому

      @@fdavis1969 We Just Spent Over 40 Minutes Trying To Do That And Could Not Reach The Bolt Properly To Use The Socket Wrench Because Of The Way The Bolt Is Facing. This Is So Frustrating Because We Will Have To Hire Someone To Remove The Battery For Us And Replace It Every Winter When We Want To Store The Battery. We Had To Leave It In Place And Not Be Able To Use The Mower. I Wish They Would Have Left The Battery Under The Seat. But Thank You For Responding.

    • @fdavis1969
      @fdavis1969 3 роки тому

      @@ceciliaball3509 I was so frustrated because my battery had given out and I couldn't get the old one out. Between that and the kill switches built in to this thing I was about to call a repair man. Finally I saw the one screw holding that arm in place It prevents you from lifting it up. I don't know how I can show you a picture of what I did. My email is davisf1969@yahoo.com. if you send me a message I can respond with a couple of pics to try and help you out.

    • @marshawiley8277
      @marshawiley8277 3 роки тому

      How do I change my battery? Can't get it out! Please help me!

  • @chrisallen9655
    @chrisallen9655 3 роки тому

    I just got mine and got it started fine but when I put it in gear and release the brake it doesn't move. Not sure what to do.

  • @0602djdes
    @0602djdes 4 роки тому

    Bro thanks for the tutorial

    • @scotthawk6171
      @scotthawk6171 3 роки тому

      Has anyone had TROUBLES with rack and pinion R110.

  • @originalsmountup2019
    @originalsmountup2019 3 роки тому +3

    Video starts at 8:30

  • @sherrykerr4345
    @sherrykerr4345 3 роки тому

    I have a craftsman 247290000 rear engine mower. It will not move, not in forward, reverse or neutral. I fixed it once before, but can't remember how. I think someone had to push in the clutch and I had to release something under the back. Can you help me

  • @hectorgonzalez8565
    @hectorgonzalez8565 Рік тому

    How do you fix r110 if the blades don't engage?

  • @kevingibson996
    @kevingibson996 Рік тому

    If my riding more won't get in good from the reverse and it just stick it won't move what is the

  • @kevingibson996
    @kevingibson996 Рік тому

    My riding mower won't move and it won't start it's locked in it won't move and it won't start how do I fix it or what is the problem

  • @tomanderson3767
    @tomanderson3767 3 роки тому

    Blade won’t engage found screw on deck of mower any ideads

  • @eddiecolon2963
    @eddiecolon2963 Рік тому

    How do you change the oil in this mower no filter ?

  • @matthewh117
    @matthewh117 2 роки тому

    What year was it made?

  • @georgeplunkey9193
    @georgeplunkey9193 Рік тому

    How much is this

  • @dontupdateifitworks.424
    @dontupdateifitworks.424 2 роки тому

    Line over? Net~nanny? Wasn't me! But when your helper comes: ARTHRITIS , with a TKR &
    PENDING, T-HIP-R SURGERIES, my SEARS ( RIP) Craftsman is getting lonely? Even with bolts in the tire tread : no parts ? She will still turn 3100 RPM & USALLY ON THE SECOND PULL ( with my " weak" arm , I don't ever want to go through a :" TNR" again and you won't too!
    The German & UK are releasing their BRIGGS & STRATTON MODLE " 625i" with a battery start & no pull! I have been dri starting for years -- OEM RECOIL IS $99.60 & THE OEM PULL CORD IS $ 12.50 + SLIPPING & FONDLING! THE NEW MOWER DIDNT COST THAT MUCH - THEN THEY SAID $700.00 - $800.00 FOR A " CLOSEST" replacement - direct from China? The Germans won't export until......

  • @suedaily5445
    @suedaily5445 4 роки тому +1

    What type an weight of oil do u use in this mower??

    • @GeorgiaRidgerunner
      @GeorgiaRidgerunner 3 роки тому

      Straight 30 weight oil is sufficient
      The oil container will say sae 30 on it you can use other other oils
      Like 15w30 just so long as it says
      30 note temperature at time of use should be taken into consideration
      but sae 30 is adequate for most temperatures in your manual you should have an oil viscosity to temperature diagram if you do not
      Have the manual you can probably
      Find it on line hope this helps

  • @matthewc4451
    @matthewc4451 3 роки тому

    How big of a roller can this pull?

  • @joeparrish4894
    @joeparrish4894 4 роки тому +1

    Is the engine shroud and steering wheel housing cover made of plastic?

  • @terrellscaife2411
    @terrellscaife2411 2 роки тому

    So how much did you buy this for

  • @MrINFINITI8
    @MrINFINITI8 2 роки тому

    Anybody know how to order a replacement front well for this riding lawn mower

  • @alainciappi6382
    @alainciappi6382 2 роки тому

    je cherche pour faire la vidange d'un moteur briggs et stratton 875mini rider60rde ou se trouve le bochon de vidangedu readystart 190cc

  • @johnh6345
    @johnh6345 2 роки тому

    How do you clean under the deck near the blades? There is no hose connection on the deck

  • @nicoleingle206
    @nicoleingle206 4 роки тому +1

    Can you scoot up the seat

    • @vette9305
      @vette9305 3 роки тому

      Ya remove the bolts under it set it then out the bolts back in

  • @hd28picker
    @hd28picker 3 роки тому +2

    Hey, I just bought one of these today. I don't appreciate you saying this is just a cheesy machine. By the way, stop and blow your nose every now and then. O one wants to hear you sniffing the en tire video....

  • @lisamonsivais8016
    @lisamonsivais8016 3 роки тому

    When do you know when to change the gears?

    • @gregnissen3950
      @gregnissen3950 2 роки тому

      It just depends on how fast you want to mow. I personally like to mow on speed #2. It's slow but I'm in no hurry and it cuts the grass well.

  • @hoangasam896
    @hoangasam896 4 роки тому

    IS THERE A KILL SWITCH FOR THE BLADE NOT BEING DISENGAGE? everytime backing up blade disengaged

    • @ChiMasterFlex
      @ChiMasterFlex 4 роки тому +1

      Well, I don't have this mower, but I've watched enough videos to tell you that this is a safety feature. If you do want to mow in reverse while engaged, you need to move the key position to the yellow. There's a couple other videos out there that outline this procedure, good luck

    • @vette9305
      @vette9305 3 роки тому +2

      Put the key in the yellow area and hold the triangle down until a red light comes on and then you will be able to back up

    • @polarbear5740
      @polarbear5740 2 роки тому +1

      @@ChiMasterFlex As with anything it comes down to common sense,if you are cautious and pay attention to your surroundings it's fine.They put the kill switch there for the majority of the idiots out there.

  • @DMA631
    @DMA631 4 місяці тому

    why

  • @BlueberryStinkFinger62
    @BlueberryStinkFinger62 2 роки тому

    MTD builds Craftsman to the Craftsman Specs not MTD Specs

  • @L1ghtstorm
    @L1ghtstorm 2 роки тому

    $1750 now at lowes…no ty overpriced big time

  • @roncavallo7638
    @roncavallo7638 3 роки тому +1

    Horrible piece of junk. My steering keeps breaking and almost killed me once. Junk.

  • @ianlaconianhthesmallengine124
    @ianlaconianhthesmallengine124 3 роки тому

    I don't like those small riding lawn mowers They're junk I have a tractor A Is tractorYou can put different attachments onTractor you just don't cut grass with it

  • @ianlaconianhthesmallengine124
    @ianlaconianhthesmallengine124 3 роки тому

    I actually have a real riding lawn mower it's called a tractor

  • @dontupdateifitworks.424
    @dontupdateifitworks.424 2 роки тому

    GOT A SEARS ( RIP) 1996 REAR ENGINE RIDER( YES>> I STOCKED BELTS, BLADES , CARB parts , BRAKE PULLEYS & ADDED TWO DECK WASHERS! CAN'T TALK TO TOO MANY DEALERS/ " LAWN MOWER PEOPLE about her at her age ( & grade?😂)
    WHEN ITS A MAJOR JOB: they draw an audience & they should sell tickets but they sell so much from them : they pass the savings onto me! 1, 2, 3, !!!
    1. Keep battery on a maintainer & clean carb & air cleaner : as I 🤬 curse ETHANOL!
    2. Change oil like your shoes: put a on a draining hose & a " low point drain" -" wing nut" plug / or get one made, less HOT OIL on the fingers!
    3. Check tire pressure or a tight turn on a low tire will take it over off the rim(- wire tie / ties to collapse & raise the bead. KEEP IT CLEAN GOES WITHOUT SAYING! BUT GET A GATOR BLADE & @1 INCH OR LESS AT A PASS = A FOOD PROCESSOR & GOLF GREEN L AWN! ! SEARS ( RIP) ALeans me away from Toro FWD. Or any other but never a :" 2X battery grass chewer & hill maker : neighbors got one: back to gas ( 100LL aviation gas- no ETHANOL - water, gum or scum + stabilizer - Snow blower too: OIL is your best investment next ! 😀 But never believe 💸😭🤬☠️ " never change oil" claims - it means :" change mowers in 4 -5 seasons! ☠️ " TURNING IT OVER OR UPSIDE DOWN : IS INSANE!
    >>>. WARM, DRAIN ,FILL ,& CHECK CHECK CHECK ? THATS IT! & HOURS NOT CALENDAR'S !
    MY PUSHER IS 27 & DOES HAVE SALVAGE PARTS & I WON'T PAINT HER RIGHT - JUST CLEAN CLEAN CLEAN ( SILICONE SPRAY OR PAINT THE UNDER DECK> OR you can soon feel the:" Prop wash"? 😂😘 But not 💸💸💸🤬😭☠️ enjoy with your partner :