Це відео не доступне.
Перепрошуємо.
Fanhome Build the Knight Rider KITT - Stages 27-30 - Installing the Turbine
Вставка
- Опубліковано 15 сер 2024
- This is a 1:8 scale model car from the hit series "Knight Rider". You can get this collection from
bit.ly/knight_...
PROMO CODE: KITT
There is are some Facebook groups to compliment this build at
/ 261261845895546
/ 214695960752480
and some mod groups at
/ 628879174742153
/ 151602310444856
Blueprints for this build and the cushioned building mat can be bought from
www.partworkupg...
If you would like the shirt I am wearing in this build series head on over to
www.bit.ly/wayn...
00:00 - Introduction
01:01 - Stage 27 - Assembly of the Air Compressor
08:03 - Stage 28 - Assembly of the Gearbox
16:28 - Stage 29 - Assemble the Chassis Rear Section
22:47 - Stage 30 - Chassis Beam Assembly
Subscribe to World of Wayne at bit.ly/307c9rj
Support the channel and see the behind the scenes videos and blogs on my Patreon channel at
/ worldofwayne
----------------------------------------------------------------------------------------
My Social Media:
www.linktr.ee/w...
My Amazon Store
If you like anything you see in these videos I have an Amazon store here. Check it out
UK: www.bit.ly/worl...
US: www.bit.ly/worl...
Get Amazon Music at
www.getamazonmu...
#knightrider #kitt #fanhome #transam #pontiac #firebird
If you enjoyed this video or some of my other content please consider pressing the SUBSCRIBE button and hitting the BELL next to it so you get notified when I release a new video. You will find all the links and information you want in the expanded video description. If you have any questions or comments please leave them below. You can also see my behind the scenes video logs on my Patreon at www.patreon.com/worldofwayne
i am going to call this " The world of wayne two thousand"
@@procta2343 😂😂😂
Comment on the turbine engine. You know on the TV show you could not see K. I. T. T engine bay was never shown. Even when something happened to KITT ! So my mom bought me the model car. K.I.T.T ENGINE WAS A REGULAR 82 TRANS AM MOTOR ! There was an option for A turbocharger on the engine. A chrome piece that sat on top of the motor. That was Depressing for a teenager in the '80s! What make this model exciting for me is to see they took time to do the fictional engine. The turbine engine looks like a ram air induction!!!! WOW !!!!!! Also turbo boost and high burst SPEED makes sense! The teenager in me finally has closure. Lol 🤣😆
Yeah, they never showed the engine. Even when kit fell into the acid bath and died there. Or the attack from Goliath...
I've seen pics of another Kitt model - smaller scale, I think - with a futuristic looking engine, but completely different to this one.
Have a search.
I FINALLY was able to buy this in the USA, as of early October/late September 2022. I should add, again ..my stepfather was a retired LAPD motor cop, and he worked on the "Knight Rider" show, among others ..including "Baywatch". Also? "Back to the Future". He was amazed by the frozen DeLorean scenes.
Oy glad to see you back in the UK safe !...and not got shot in the Bum outside of wonderfest...........................Cheers !!!
Thank you for your videos I really enjoy watching them
LOVE the Ram's banner!!!!!!!!!!!
Kitt is bigger than I thought it'd be. Black on black is a great colour scheme, very 80s chic.
I would LOVE to see that automotive turbine engine (and its accessories and exhausts) made to 1/25th scale for installation in the original MPC Knight Rider model kit, as well as other 1/25th scale model car kits as an aftermarket custom accessory. Currently, the only way to do this is to locate an old Jo-Han Chrysler Turbine kit, and those are getting harder and harder to find . . . .
Thanks for posting this!
Last 2 bits installed are the track bar (panhard rod) bracket and the floor for the spare tire compartment (I had to replace that thing... total pain cutting like 30 spot welds). There will be 2 bars coming off of the rod bracket, one will screw to the chassis on the left behind the wheel and another one to the rear axle (first bar is the track bar brace and second one is the actual track/panhard bar).
Kind of weird how there's no real upper support for the turbine assembly. At least as of yet. I'm betting that the one bit you left loose is going to hold one or both of the parking brake "cables" as that's near where the left side cable bolts in...
If you watch the fanhome build,most of the pipes are cut down in length. Doesn't tell you that in the magazine, not sure how much difference it makes. Still a better build than the F40.
It is looking good and next time you will be fitting the exhausts into place
Cheers for the video much appreciated ❤
In France they hav the semi trucks collection+they also brought out the knight industry's truck or lorry in1:43scale. You might still be able to getta hold of1on Ebay
There's a guy here in the states who's found the original truck and trailer from the series and is trying to restore it he also has kitt from season 4 if memory serves me.
Hi Wayne. Think you’ve missed short radiator tube. There’s wiring errors in the instructions. Step 28 - 10 is totally contradicted by 29 - 3. Cable 28l can’t go to 3 pins. I ended up watching Fanhome video 28/29- they cut the tubes different to what was supplied, but very good visual guide to get everything connected. Recommend.
Yep. Thanks for that.!I connected it now
A link to that video would be nice so others can make the correct connections too.
Those cables were a nightmare, took mine apart about 4 times until I was happy with it, instructions were thrown out of the window 😂
Cool build! But I think you got the transmission pan on wrong 🤔....
All changed now lol
@@WorldofWayneUK lol! Sorry my ocd was bugging me on that one 😅
@@WorldofWayneUK D'oh! Nevermind my comment above. Fixed I see.
We have the same level OCD. I would have turned the switch around also. LOL
Have you seen the Knightrider historians channel on youtube? They search for props from the show, and they've just found the trailer for the truck. They already have the cab, and they looking to restore both to their show liveries.
Nice. Yep I do watch that channel
The gearbox sump doesn't look right. I've never seen one hanging off the side like that. But I'm no expert.
At the 8:36 mark in your video, look at Stage 12...the Sump should be in an orientation that tapers along with the bottom of the transmission. CLEARLY looked odd the first time I saw you put it on. May have the l-bracket inside wrong as well. You're gonna be tearing down quite a bit to fix that all that, I'm afraid.
Looking Good Wayne. Keep up the good work.
I am considering a 350 from 1/8th scale model of a Bandit style Trans am Am!
Notice the damper spring cap on left wheelarch doesn't have a cap on like right wheelarch
Not only quite clear. Stage 28 as well as stage 30 had errors. For stage 28, there were errors in the naming for the pipes and the parts called 30A and 30B are switched. In the instructions in step 1, 30A is mentioned however 30B is shown. The same for step 3, 30B is mentioned however 30A is shown. The parts themselves are correctly placed, but the naming is wrong.
The gearbox pan is the wrong way round lol
Yer I realised lol. Had to do something wrong didn’t I lol
@@WorldofWayneUK I couldn't not stare at this the whole time.
@@robinaroundtown...2194 nooooo. I just undid the two screws holding the engine in and tilted it up enough to get to the gearbox screws
This pack was definitely tricky. Those pipes were not well labelled in the magazine. I had to watch the official fanhome video for it. They had the guy cutting the pipes down which made it look neater overall.
Also I hate to point out mistakes, but you have the black transmission pan the wrong way round. Also there was instructions to attach one of those 3 thicker pipes when mounting the engine. Easily done, this was a complicated pack
Hope you can sort it out simply 👍🏻
Yep. All done and correct now
Exactly where did you found the offcial fanhome video, I can't seem to find it.
@@renefrijhoff2484 over at the Fanhome UK UA-cam channel. Under the playlists they have the official build videos for Kitt, currently goes up to about issue 66 I think.
It's weird this not being in the US yet. Mind you the DVD of the Battle of /Britain/ was released in America first. Go figure. Some decisions make no sense.
I really do want it
superbe video nous en france ont est au numero 83 na na na lol j ai toujours un grand plaisir a regardé tes video qui mon inspiré a faire ma chaine youtube aussi gros like de posé
The engine reminds me of the V2 rocket's turbopump, lol.
That small fat hose coming off the radiator goes to engine leaving you with 2 hoses not 3
👍🏻
Stage 28 is the first stage I’ve started, and had to stop. After a break, I’ll figure out how to continue. The directions are horrible. I wish everything was (little hoses) were labeled in some way.
In issue 29 you attach hose 28I into the battery. In issue 28 both ends of 28I have already been attached to 26H and 23C .... does anyone know what hose actually attaches to the battery port nearest the engine
I think possibly 28H and 28I have been switched in the instructions. That would solve it if 28I is supposed to go from the compressor to the battery
It's already here now I just ordered it and got my first 2 issues. Any word on what's going on with eaglemoss?
Welcome back
👍
that black sump thing is on wrong mate.just looking at my engine cos cant get it to fit yet.
How long did stage 27 take you in total? Because it took me three whole hours, some of those pieces were so fiddly!
wonder if they will extend the build with super pursuit mode conversion
Cant work these hoses out. Thought I'd figured it out but nope
Do you feel that the car is a bit low… I think it should ride a bit higher
Am i the only one who's slightly disappointed that the turbine appears to be a transversal design on a RWD car?
Do you watch the knight rider historians channel on yt? They've just found the trailer for the truck (they already have the cab)
Yep. It's a great channel
I wish they put a real life engine in the model. I know that KITT has a turbine(as per the show) but it still would be nice for a real engine.
Thank you for the videos, they are very helpful with my build….. and I’m debating on whether or not to do the Titanic after KITT is done. I’m also currently building a KITT from a 91 Firebird… so I’m doing the 1/8, and a full size!
Thanks again….. I’ve been following you since the beginning of the DeLorean build from Eaglemoss.
damn ı wanted to this so much ; but its onkly avaıble ın 5 country and they dont send without subscription (it would be good if theysend all parts in single shipment
What Size Part Work Upgrade Mat do you use
A2
you got the trany pan backward
When will the next issues be in for the knight rider model
When next delivery arrives
@@WorldofWayneUK okay thank you
When the next part of the fast and the furious Dodge charger coming-out
Probably 4 weeks now as I just released one a couple of days ago
I see that one of you were wondering
Any luck finding a Gundam model kit and would like to see a picture of my Gundam?
Haven’t found one yet
How's the Enterprise redux coming along?
It’s not atm. I’m waiting to see how the saucer connects to the stardrive section
Where did you get the t-shirt
bit.ly/waynestore
When is he gonna be finished
It’s 110 stages so a little while yet
@@WorldofWayneUK thx Wayne keep up the good work
u put the black plastic part on the gear box wrong just so u know
So you get 4 stages each time so it costs £40.00 a month ?
Yep
most magazines have so low parts inside at 1 magazine was just 2 plastic parts very small and that was all and i pay 13 euro no wonder thats 110 magazines and need 2 years before done.. more parts in a magazine and you can have it done in 1 year and need just 50 magazines, fanhome know why they do that so that you build 2 years..
But then you will be paying 4x the amount every month
🙏🙏💞💞👍👍🍺🍺🇦🇺🇦🇺🐕🐕
Lol