Just make sure to watch it at 0.25 playback speed for a realistic interpretation... Hate videos sped up faster then actual operation when doing a demonstration.
Hello, I'm waiting for the Evo pro 3030, I'm glad it has better engines and the extension to 60 cm. I think it's great but my question is if the drivers that the board brings support them since I understand they need more than 2A to work optimally
nema 17 2A have big joke, toy machine, minimum good aluminium milling machine can build need nema 23 or 34 motors 4-6A drivers 1000x1000x300 work area less than 800$ easy build. if want cut aluminium need minimum nema 23 470 oz motors. nema 17 not have torque move good, need waste lot lot time milling only 0,1mm pass.
Still waiting... replenishment was announced on Amazon for September 25 but now delivery is available in 1 or 2 months. Hurry up, Genmitsu's 3030 is just around the corner
i wish i found this before i got the genmitsu 3020, i would have gone for this one instead. the leadscrew nuts are a big upgrade, are those on only the Y axis or an all axes?
After reading the comments i noticed the pro will be released in the next few days. Will you sell upgrade kits for those that just have the evo? I just ordered mine today but would love all axis on linear rails. If i want to upgrade to ball screws is that something you will offer or can i find something thatd work online?
Hello, this is the purchase link for the upgrade base. www.amazon.com/dp/B0BRJM8YZG/ Stepper motors with greater torque will be available later. At present, this structure is relatively difficult to install the ball screw, and there are too many places that need to be changed. Although Evo uses a T-shaped screw, the gap is adjustable, and the precision of the machine can meet most of the engraving needs.
I wish I could buy an Evo "Pro" that came with the 3040 linear rail extension base and 65mm mount for around $750. No point in paying for the smaller base with linear rods and the smaller mount and spindle if I'm going to immediately uninstall them and add my own router. Let me know if you end up offering something like that and If I haven't bought something else yet I'll snatch one up for sure.
Hi, thanks for your suggestion, we are planning this way. The Evo "Pro" is expected to be released next month. At the same time, we will use 42-60mm Nema17 motor to increase the torque. Look forward to it!😊
@@AnoleXofficial I see that the prices have dropped on your website (as opposed to Amazon) so I can get the router, extended base, and 65mm mount for $700 which seems like a great deal. If I'm not worried about missing out on the better stepper motors, can you tell me if it's worth waiting for the Pro or if I should buy now (it's getting hard to wait since I really want one!) Thanks so much Joe
@@seetheflow Hi Joe, it's a good deal to buy now. For stepper motors with greater torque, we will provide upgrade kits in the future, and you can upgrade them later if you need them. We will now ship from our US warehouse and your order will be processed within 48 hours. Thanks😊
Or if package with makita is too much work , is there another way that the power supply come with enough watt to feed makita , I buy the router myself is either okay.
makita etc, handrouter machine have totally worst spindle what can buy, lot better have cheapen but better real 800W aircooler ER 16 spindle, strong more and silent lot more, makita router have horriple high noise, not newer can use if want neighbours can sleep and live too. if use next 2-3 house far not can peoples live and sleep. noise have horriple big.
makita router not has plan used cnc, worst big noise machine, no torque lot, lot better have minimum air cooled 800W spindle lot more power than makita, router used spindle have worst option what waste money. same cost lot better 800W air or 1,5KW water cool spindle.
anyone else slow it down to .25 to see the real speed? still looks good at normal speed
As the first thing.
I hate videos where the speed was increased.
Hi, thanks for share. I am trying to cut it im my DIY router. What rpm is used to mill this 6061 aluminum?
This is insanely good for the price.. wow.. Im buying one of these asap
Just make sure to watch it at 0.25 playback speed for a realistic interpretation... Hate videos sped up faster then actual operation when doing a demonstration.
It’s still impressive!@@DUIofPhysics
Would this machine be suitable for 12mm 7075 t6?
Yes, it is recommended to upgrade the 1.5kw spindle to get higher efficiency and smooth cutting surface
That spindle doesn't look like the 300w version you are selling with the machine
it says in the video it using the Makita RT0701C so not the standard 300w spindle, the Makita is 1/4 HP or around 700-800W
Do you ship to Mexico from amazon?
You can try to buy it from Amazon US. Amazon may charge a remote delivery fee. Thanks
Hello, I'm waiting for the Evo pro 3030, I'm glad it has better engines and the extension to 60 cm. I think it's great but my question is if the drivers that the board brings support them since I understand they need more than 2A to work optimally
Yes, we have tested it
nema 17 2A have big joke, toy machine, minimum good aluminium milling machine can build need nema 23 or 34 motors 4-6A drivers 1000x1000x300 work area less than 800$ easy build. if want cut aluminium need minimum nema 23 470 oz motors. nema 17 not have torque move good, need waste lot lot time milling only 0,1mm pass.
This is our 3030-Evo Pro, thanks Luck for sharing.
ua-cam.com/video/9ucWF4hsm4s/v-deo.htmlsi=3jHnk2S5jmuOi6Qj
Still waiting... replenishment was announced on Amazon for September 25 but now delivery is available in 1 or 2 months. Hurry up, Genmitsu's 3030 is just around the corner
@@rafaelgoldstein8956 The machine has entered the Amazon warehouse and is now available for sale
i wish i found this before i got the genmitsu 3020, i would have gone for this one instead. the leadscrew nuts are a big upgrade, are those on only the Y axis or an all axes?
Thank you. All three axes use anti-backlash nut blocks.
Can this thing mill aliminum lowers and frames?
Looking good!
After reading the comments i noticed the pro will be released in the next few days. Will you sell upgrade kits for those that just have the evo? I just ordered mine today but would love all axis on linear rails. If i want to upgrade to ball screws is that something you will offer or can i find something thatd work online?
Hello, this is the purchase link for the upgrade base. www.amazon.com/dp/B0BRJM8YZG/
Stepper motors with greater torque will be available later. At present, this structure is relatively difficult to install the ball screw, and there are too many places that need to be changed. Although Evo uses a T-shaped screw, the gap is adjustable, and the precision of the machine can meet most of the engraving needs.
I wish I could buy an Evo "Pro" that came with the 3040 linear rail extension base and 65mm mount for around $750. No point in paying for the smaller base with linear rods and the smaller mount and spindle if I'm going to immediately uninstall them and add my own router.
Let me know if you end up offering something like that and If I haven't bought something else yet I'll snatch one up for sure.
Hi, thanks for your suggestion, we are planning this way. The Evo "Pro" is expected to be released next month. At the same time, we will use 42-60mm Nema17 motor to increase the torque. Look forward to it!😊
@@AnoleXofficial sounds great! Do you have any kind of notifications I can sign up for or should I just keep an eye out on your UA-cam page?
@@seetheflow Hello, you can subscribe to my UA-cam channel and Amazon store, you can also follow our website
@@AnoleXofficial I see that the prices have dropped on your website (as opposed to Amazon) so I can get the router, extended base, and 65mm mount for $700 which seems like a great deal. If I'm not worried about missing out on the better stepper motors, can you tell me if it's worth waiting for the Pro or if I should buy now (it's getting hard to wait since I really want one!)
Thanks so much
Joe
@@seetheflow Hi Joe, it's a good deal to buy now. For stepper motors with greater torque, we will provide upgrade kits in the future, and you can upgrade them later if you need them. We will now ship from our US warehouse and your order will be processed within 48 hours. Thanks😊
spindle rpm?
Ca avalé bien pour une si petite machine reste à voir en precision
كم ثمن هذه الماكينة واين مكان تصنيعها
www.anolexcnc.com
Was using an 1/8” or 1/4” bit?
1/8" O-Flute bit
@@AnoleXofficial wdym O-flute?
hi i want to have the evo pro 3030 with makita router, how to make a order with that ?
Or if package with makita is too much work , is there another way that the power supply come with enough watt to feed makita , I buy the router myself is either okay.
makita etc, handrouter machine have totally worst spindle what can buy, lot better have cheapen but better real 800W aircooler ER 16 spindle, strong more and silent lot more, makita router have horriple high noise, not newer can use if want neighbours can sleep and live too. if use next 2-3 house far not can peoples live and sleep. noise have horriple big.
makita router not has plan used cnc, worst big noise machine, no torque lot, lot better have minimum air cooled 800W spindle lot more power than makita, router used spindle have worst option what waste money. same cost lot better 800W air or 1,5KW water cool spindle.
i want the pro EVO!!!!!!! comment from Taiwan
Bundan nasıl alabilirim
Our website: www.anolexcnc.com
Pretty much makes my decision for me…