First off I want to thank you for the video it will make it a lot easier for my 1990 Eddie Bauer bronco 2 gas tank removal ! Vehicle hasn’t run in 13 years old gas ⛽️ ! Your video will make it easier to put in a new tank & fuel pump sender etc! Thanks !!!
im truly happy i could help! your comment alone made this video worth making! i remember when i tried to find info on my B2 but could not so i made this to help others like yourself im truly happy i could help thanks for the comment!
I hope you don't mind, but I place a link of this video in one of my videos for people who want to drop this tank. I briefly talked to you on the fb bronco 2 owner forum. You did an awesome job with this video.
1/2"-20 Inlet - 1/8"-27 Outlet In-Line Ford Fuel Filter Motorcraft 28644TT. i also put a common line fuel filter as well before the fuel pump in the center of the line just out of the gas tank. if you need any more help lmk
Guys Make sure to add a Fuel Tank Sealant to your new Fuel tank before you install it so it dose not rust and clog up your stuff 8oz POR 15 Fuel Gas Tank Sealer Repair 49216 - Stops Rust Corrosion & Leaks www.ebay.com/itm/255576356205?hash=item3b8189b56d:g:nyUAAOSwzttio2Zp
@@HookerGaming haha, ok. I have a towing receiver bolted to the frame, and I’m thinking that’s getting in the way. That’s gonna be a PIA if I have to unbolt that just to get the skid plate on, but we’ll see. Thnx
@@HookerGaming after trying I found that my rear bumper is an OEM Bronco II and has a towing lip that extends under the bumper and blocks the skid plate from going up with the jack. I’m going to have to remove that dam lip, with rusted bolts, to get the skid plate back up in place.
Hey im doing the installation job for the fuel tank on my B2 again, i pulled off a new tank i had put on 2 years ago. i have to order a new one. You need to put this into your new gas tank to stop it from rusting, 8oz POR 15 Fuel Gas Tank Sealer Repair 49216 - Stops Rust Corrosion & Leaks www.ebay.com/itm/255576356205?hash=item3b8189b56d:g:nyUAAOSwzttio2Zp
🔥If i helped you feel free to get me a cup of Coffee=)
Also Like & subscribe, Thank you ^_^
First off I want to thank you for the video it will make it a lot easier for my 1990 Eddie Bauer bronco 2 gas tank removal ! Vehicle hasn’t run in 13 years old gas ⛽️ ! Your video will make it easier to put in a new tank & fuel pump sender etc! Thanks !!!
im truly happy i could help! your comment alone made this video worth making! i remember when i tried to find info on my B2 but could not so i made this to help others like yourself im truly happy i could help thanks for the comment!
I hope you don't mind, but I place a link of this video in one of my videos for people who want to drop this tank. I briefly talked to you on the fb bronco 2 owner forum. You did an awesome job with this video.
Used this for my install. Nice vid man lovely rear bucket seats!
Thanks!! Saved me a ton of mistakes
Thanks for the video dude! Glad I didn’t have to remove the bumper
Nice job! Wow, that b2 is super clean underneath, cleaner than mine which is pretty clean...
Nice vid, very informative
1st
Thanks. I was looking for how to remove the wiring harness from the top of the tank without dropping the tank. Guess I have to drop the tank anyway.
GRACIAS TOTALES!
Very helpful. Semper Fi
This might help me on my 89 ford bronco ii
It take me and I friend bout two days
I have an 85 as well, it's been sitting for awhile. Won't start after a tune up, thinking I need to replace the fuel pump, maybe carburetor?
Clean or replace the carb there not that expensive. and add a electronic fuel pump and a fuel pressure regulator and you should be good
Any chance you know the fuel filter for that? I cannot find the right one that fits flush with the carb. Any help is awesome!
1/2"-20 Inlet - 1/8"-27 Outlet In-Line Ford Fuel Filter Motorcraft 28644TT. i also put a common line fuel filter as well before the fuel pump in the center of the line just out of the gas tank. if you need any more help lmk
Thank you so much! I seriously appreciate the info! Bought probably 5 different brands and none thread without breaking the seal and leaking
There's a diesel bronco? What the fuck no way
Bro you got a carburetor video?
i can make one if you need one, whats up? what do you want a vid about?
Guys Make sure to add a Fuel Tank Sealant to your new Fuel tank before you install it so it dose not rust and clog up your stuff
8oz POR 15 Fuel Gas Tank Sealer Repair 49216 - Stops Rust Corrosion & Leaks
www.ebay.com/itm/255576356205?hash=item3b8189b56d:g:nyUAAOSwzttio2Zp
part 2!!!!
You know i had part 2 its floating around somewhere. anything i can answer?
You never made an install video. I can’t get the dam skid plate to go back on🤦🏻♂️🤦🏻♂️🤦🏻♂️
use the Car Jack and some 2 by 4 as spacers to get you more height and hack it up.
Just play my video in reverse XD
@@HookerGaming haha, ok. I have a towing receiver bolted to the frame, and I’m thinking that’s getting in the way. That’s gonna be a PIA if I have to unbolt that just to get the skid plate on, but we’ll see. Thnx
@@HookerGaming after trying I found that my rear bumper is an OEM Bronco II and has a towing lip that extends under the bumper and blocks the skid plate from going up with the jack. I’m going to have to remove that dam lip, with rusted bolts, to get the skid plate back up in place.
Hey im doing the installation job for the fuel tank on my B2 again, i pulled off a new tank i had put on 2 years ago. i have to order a new one. You need to put this into your new gas tank to stop it from rusting,
8oz POR 15 Fuel Gas Tank Sealer Repair 49216 -
Stops Rust Corrosion & Leaks
www.ebay.com/itm/255576356205?hash=item3b8189b56d:g:nyUAAOSwzttio2Zp
WHERE ARE YOUR SHOES MAN