Fix & clean Bosch/Siemens dryer- Fiksaa ja puhdista Bosch/Siemens kuivausrumpu
Вставка
- Опубліковано 8 тра 2017
- If your Bosch/Siemens dryer thinks water tank is full when it's not, reason is most likely dirty float switch. With this video you can clean it and fix the problem in 30minutes.
Subscribe if you want more videos!
Jos Bosch/Siemens kuivausrumpusi valittaa täyttää vesisäiliötä, vaikka säiliö ei ole täynnä, syy on todennäköisesti tahmainen uimurikytkin. Tämän videon avulla puhdistat uimurin ja vian 30 minuutissa. - Навчання та стиль
Although I have the heat pump version, this gave the right idea and I got mine fixed. But it's a little bit different. If you have the heat pump version, remove the top panel and the right hand side panel, Behind the motor and the belt you'll find a pump cover. It's iin a little bit awkward place, but removing the belt and fiddling with the motor gives you enough room. Your best friend here is a wet vacuum cleaner, the easiest solution is to keep water flowing from the opening under the water tank (the one it uses for self-cleaning the condenser) and vacuum it from the pump opening. This will flush all the dirt into the pump recess and let you clean it away. And of course, clean the pump itself.
Kiitos hyvistä ohjeista. Itse taidan purkaa sivuseinän kautta, mahtuu paremmin työskentelemään ja samalla putsata nukkaa kunnolla.
Wow. You made that look a lot easier than it was. When I popped that white tube out, I had no clue where it came from! 😂
Thanks for the vid. All fixed. Save me a couple hundred quid I bet. 👍
you saved my siemens dryer! thank you soooo much!
Kiitos, lähti kone taas pelittämään!🎉
Kiitos aivan mahtavasta videosta. Sen avulla korjasin kuivausrumpumme! Käy ja kukkuu taas👌
Big thumps up HARRI, works like charm!
My pleasure! Did it as note to myself as machine needs attention twice a year.
Fixed the problem for me. Great video and easy to follow instructions!
Great video thanks Harri!
YESSS! it worked!
It looked a little bit different (it did not have the floater but some iron parts) But you got me started. Cleaned it all up and Voila, it runs like a charm. My dryer is fine now and i can do my own maintenance from now on.Will be doing this every once in a while.
Many thanks for uploading! Think it saved me a lot of money. (don't we all love that)
Thank you for this video! I managed to fix a Siemens E46 30 using this video. Note however that screw to remove the cover is a Torx T15 on this particular model. Good to know since it hard to see/find.
This solved my problem. Thank you!
Thanks for the video!
Thank you so much!
What is the size of the allen screw used? cant seem to find one that fits
Kiitos Harri! Pelastit minua. 😁🇫🇮
Ole hyvä! Itse joudun tekemään tämän operaation parin kuukauden välein.
Thanks for good instructions. I still also have that key symbol shown and the machine wont start. Have tried to power off. Anyone got suggestions or know where I could find the manuals online?
thanks it works now perfect video
thank you
onnistu, taas kuivaa!
Minulla on auttanut jo pelkästään se, että olen imuroinut pois sen "möhnän" mitä vesialtaan suojakannen alta on löytynyt. Toki se edellyttää imuria, jolla voi imuroida vettä.
Mainio vinkki!
Key error comes on display and dosent start I have same dryer
power off and after 10 seconds power on
What if you have the same problem but my tumbler have a self cleaning condenser
Check the comment I just left to the main thread. Been there, done that :)
The whole instructions are actually here. Although this handles only the cleaning of the sensor. I had the pump already clogged, so I had to clean that too. But this video shows how to reach them, the pump is next to the sensor. ua-cam.com/video/D-5WB1Pl9Nc/v-deo.html
@@shamr0ck75 Thanks 🙏
Lähti lapasesta tää puhdistus 🤣
Ideoita kennojen puhdistukseen?