Thanks for visiting our YT channel, and please do visit our shop's website: www.charkbait.com You will note we offer excellent value, including braid and mono rigging on most models.
Finally starting to make sense of your Avet reel comparisons and suggested fishing applications. GREAT breakdown of the info on these "go to reels".... Thanks !!!
thanks your for doing the fantastic overview - very informative and great seeing the physical difference against each reel - plus also nice getting suggestions on application and what to spool with
Just stopped by charkbait yesterday to get some advise on a good 20-40 size rod and boy you guys are very informative I was talking to Beta for at least 1hr just discussing about rods and fishing tips in general. I'll be there today as we'll to pick up some fishing supplies.
I have 2 SX (one a raptor) and an MXL, LX, HX and HXJ and absolutely love them. I have them on a couple of the rainshadow rods the guys sell, and couple of united composite rods and one of the toro tamer travel rods and they cover all my saltwater fishing needs from here in NC bottom fishing, and on all my trips down to florida to fish the middle grounds and the dry tortugas. Mark and they guys are where all my rods and reels came from. Super helpful and really work hard to keep customers happy.
Thanks for the info. I'm confused on which reel to get now. I was leaning towards an avet mxj or mxl, but the penn fathom star drag reel looks pretty good too. Too bad it doesn't have cast control though.
6:10 is just brilliant info. I gotta give Mark a call and see what U.C. blank he recommends for an LX Raptor filled with 40# JB to be used for 5/7oz. iron jig casting to school tuna.
I was thinking of getting the hxw for tarpon and kingfish from a pier, down here in Florida. I was wondering what and how I should spool it with. I was thinking braid backing and mono top shot of about 40lb or 50lb. Would you suggest that for this reel
hi! ill be fishing for tuna.i do want 25 lb test line and 40.whats the type of avet reel is suited for this that i can cast the bait and will fit on seeker rod and what type of seeker rod.planning to put spectra underneath ..thnks...
I'm planing on fishing Catalina and channel islands and some San Diego. Which reel should I get to pair up with a seeker stealth rod. Planning on going for yellowtail and white sea bass
Can you use the magnetic cast knob to also alter clicker tension in free spool once your bait is already in the water? For instance, if I'm fishing for fish that are spooked once they feel the tension/drag of that clicker when it's on. I believe you can do this with the Okuma Andros with their cast knob but I'm wondering if you can do it on the Avet reels, and in the particular the SX MC 5.3 model.
Im thinking o get the lx or the hxw. which one would you suggest for king fish, shark, and maybe a tarpon, a dividing factor is how's the free spool for both. I heard the hx does have a great free spool
Hi Mark, awesome videos, I just wanted to share something interesting I found out with a buddy of mine who land based shark fishes as well. I was testing the drag on my avet LX with a properly calibrated scale and I found that, even with the preset nowhere near locked down, pushing 21lbs at strike, and 30lbs at full with perfect free spool too, I had it attached to a rod but the preset could easily be clicked down 10 more turns and we already well exceeded the drag ratings no problem. my friend has an 80w and said if he cranks the preset up he pushes 100lbs easily, I thought he was joking but I tested it out for my self on my LX and damn, they really do put out at least 60% more drag than there rated... by any chance have you or your customers noticed this as well?
Yeikes talk about a late reply... Yes, Avet reels can produce more drag than manufacturer states BUT one should not exceed their numbers. You're moving the spool across a plane, go too far and right side spool bearing can be damaged. Do not exceed mfg parameters for best long term performance. Those that do go beyond the limit will pay a service price replacing bearings.
I have a question about rock fishing. I'm planning on going rock fishing out of channel islands. I heard they got some monsters there. Is a 30# setup ok or would I need to bump it up to a 40# setup?
Thanks for the reply and help, how long of a rod should I put it on? I was thinking 8-9ft of a rod because Everyone Tells me i need a rod that size to get it out farther is that true?
Hey I currently have a 50w and mxl mc and love them but I was thinking about getting a sx or mj for redfish, carp, catfish, and maybe trolling for largemouth, which one would you prefer? Also on bdourodoors I saw avet just came out with a sxj but I think that'd be a little bit too narrow for what I like
I'm going to purchase an 80W 3 speed this week. Do you have a gold one (right handed) in stock? How much would I expect to pay postage to OZ using express or something quicker?
Hello. I have an 8ft 20-50lb penn carnage deckhand rod. I'm looking for a reel that will handle both casting and bottom fishing. What do you think of the mxj or mxl?
hey in need of some help here. im looking for a reel that fits my fishing best and not to sure what avet to go for. im looking for a sturgeon, halibut, salmon ,albacore reel because thats what ill mostly be targeting. i do trolling jigging and live bait. whats your best recommendation. im a california fisherman
I own a MXJ MC and a Diawa Saltiga 2Speed. I wanted to get another Avet Raptor (should have gotten the MXL Raptor before). I fish waters out of So.Cal/LA mostly, but sometimes go into Mexico on overnights out of San Diego. I was wondering if I should get the HXJ Raptor (it's on sale and only about 20'ish more than the MXL Raptor. Is the HXJ overkill? Would I ever need the reel that big?
I fish shimano product, I fish off of deerfield pier in southern florida and I have to cast off a Pier I used a Torium 16 on a 7ft rod and i was thinking about getting a avet as my next reel but but I don't know which one would be better for casting and how long of a rod it should go on I plan on putting around 15lb mono on it. I would be using it as a casting reel for kings, bonita, and big mackeral.
I finally found an Avet reel at a local store but the storekeeper didn't know anything about them. They had a HXW on the shelf. Now that I actually saw one first hand, I want to buy one that is: HXW size. Lever drag feature. RAPTOR for higher drag. 2 Speeds. MC for aided cast control. Which model number do I need to order?
I made an update to this video which may prove helpful to you. Also, please visit our website - CharkBait.com and navigate to the Reel section and then the Avet G2/Raptor page. There you'll find the information on the model you are interested in getting as well as our special offers on the reel. Visit CharkBait!
Thank you for the reply! I just have one more question (sorry): I normally like to fish with circle hooks; between the free spool clicker and then moving the lever to strike on this reel (or lever drag reels in general), will hook ups be an issue when using circle hooks?
If I get the reel from your website. I heard you got some kind of free line. And how much would if cost to have braid backing 60# and bearkly big game 50# or 60#
Mark, I know you're not a tinkerer with reels but if you get a chance buy a spool bearing kit for any Avet reel of yours and give it a whirl. I bought a Boca Bearing ceramic kit for my MXL and my basic soccer field casting test has me gaining nearly 25% in casting distance. No need to replace all the bearings, I think it's useless to buy all 6, but the spool bearings do make a difference. I added a brake bearing also but only because the brake bearing on mine had seen better days. For $40 or so, if I can get a jig to fish before some other guys it's well worth it to me.
Been there done that on my MXL Raptor, and yes the benefits are there though the dividend is not great for me. I have learned many ways to screw up an otherwise good cast... Avet took care of me on that upgrade after I'd hammered the reel, or rather a large bluefin hammered the reel - she felt pretty squirrely after a 4 + hour fight and fail with pulled hook.The folks at Avet wanted to try out the ceramics, I was their guinea pig. I've not gone that route on my JX's. No doubt they'd benefit, but I'm also not convinced the ceramics will last as long as a very good stainless steel bearing, but I'm just a plunker and not that critical over the benefits provided thru upgrade. Others certainly can benefit more than I from that upgrade. These days I'm really not so competitive at the rail, 209 years ago, perhaps a different tale. If I were doing more "combat fishing" aboard a 1/2 or 3/4 day boat, no doubt I'd have a different perspective. But, I tend to ride the large long range boats, extended trips or private boat. In either of those situations, I'm not fishing in a competitive way, I pick my shots, catch a few fish and enjoy watching and learning from others. On our LR trips, I'm usually in the background taking pics and picking my shots for opportunities. I get the opportunity to fish, on the water for 30 days or so each year, so just a little luck can result in a plugged freezer for the year, and wife has me on a leash about how much to keep.
@@CharkBaitUSA same reel I've just put them in the MXL Raptor. Happens to be my favorite Avet and probably second favorite reel next to the Makaira 10ii. I haven't really had any issues with spool bearings on my Avets. I have replaced a few brake bearings and pinion bearings over time but overall I haven't seen the Avet bearing issue you read about online. I think people are just negligent and fish 65lb line on an SX and have the drag ramped up to where the reel barely spins. Even on my own boat I'll be casting at surfacing fish along with ten other boats many times so the extra distance is a factor. Not a big factor, but enough to convince myself it's worth $40! If my wife knew how much I spend on fishing, I'd be very lonely at night but im very lucky in that she's a chef so I could bring in all the fish I want although I don't keep a ton of fish. Enough for sure, but I'm not like some guys I see that have 4 freezers for fish and haven't made a dent on fish they caught a couple years ago. All the best.
@@jeffsmith825 - I bought my first MK10 after being spanked by that bluefin mentioned in my earlier post. That gave me the lower gear I wanted to turn the heads of fish and keep 'em coming my way. The MXL Raptor gets more casting duty, jigs, bait, iron. The MK10 for when things get more serious at 50# and 60, my MXL Rapt. and JX's at 40#. You are absolutely right about bearing failure, typically it's the fisherman's fault for trying to fish more drag than the reel was designed to do...thus a crunched bearing.
@@CharkBaitUSA the MK10, to me, is the best reel I've ever fished. I was in the Bahamas last year and caught a 142lb yellowfin pitching live bait on the MK10. The next day used it to troll for wahoo. I have even caught 80+lb Amberjack on it. Stopping a big AJ before it gets into the rocks is a tough ask and the MK10 performed flawlessly. It's just a beautiful piece. Not my casting reel but it's damned versatile. I've gone to the Accurate ATD 30's for heavy trolling, but I feel like I could catch anything that swims on the MK10. We are on the same page.
ok let me see if I remember correctly... it's [SX MX], [JX LX], [HX HXW], then it's 30 50... thanks for this video. I am looking for a nice $400-$600 reel for a gift. No Avet retailer near me so having to decide on reel from internet photos is tough cause they ALL look the right size. looking for smallest physical sized reel with 35# to 40# of drag with capacity of 500yds of 40#braid that is 2speed lever drag
Visit our website for the specs: www.charkbait.com/cs/csrAvet-2.htm The JX Raptor covers the drag mentioned, but will hold more like 500 yds of 60# braid. The MXL Raptor or even the MXJ will cover the line test and capacity mentioned, and fish those lines fine with it's given drag capability, but you are mentioning drag levels greater than needed for the line test mentioned. No reason for the extra drag pressure, given it should be about 30% of the line test being used.
Hi Mark, I just bought MXJ 5.8 Single speed today. I'll be going on a 3/4 day in may and I wanted to hear what you think this reel would be ideal for as far as uses. You are very knowledgeabale and I would like to hear what application you would recommend this reel for. Thank in advance, -F&H
I bought this in quite a rush because i saw a deali couldn't pass and had to go to work shortly after. Not to mention the traffic that day. I was thinking of getting it spooled at Charkbait so i guess i'll save my questions for later. However, if you feel like shedding some light on "common" uses then i'll take any advice. Thanks anyways.
FishandHook TV The reel will cover your needs from 30# down to 20# test lines. What can you catch? Well I just got back from a 2 day charter, good yellowfin and bluefin fishing up to 60# fish. 30 and 40 was what we used, dropping down to 25# on the leader at times. The MXL would have handled most all of the fish. So, on a 3/4 you are in good shape I'd say. Next rig for you would be a 40# outfit, for that the JX is tops.
Is there such a thing then as something close to a "HXJ 3 MC RAPTOR"? HX + (J narrower=same as LX?) + Raptor= higher drag rating + MC= magnets in frame to aid casting? 3= 3speeds?
Mark, I finally found an Avet reel at a local store but the storekeeper didn't know anything about them. They had a HXW on the shelf. Now that I actually saw one first hand, I want to buy one that is: HXW size. Lever drag feature. RAPTOR for higher drag. 2 Speeds. MC for aided cast control. Which model number do I need to order?
nmigliore that is NOT a spool tension knob, it is the pre-set drag adjustment. That is how you adjust the drag RANGE of the lever. IN Freespool ( lever back ) you adjust the knob more or less, the use the lever and push it up to ‘strike’ position, and check the drag with a scale. If you want more or less poundage, go to freespool with the lever, turn the pre-set, and back to strike with the lever. Check with scale. Same thing with max drag position. The strike and full positions are not independent though. Set for one position, the other is what it is. Hope that helps.
+CharkBaitUSA thanks, one more thing though. Can I cast that bad boy with a large popper or sardine and if so what size rod and a brand of your choice would you think? I need the goods bro. I am 6 foot 1. Thanks for your time.
Iv done a lot of jigging by oil rigs and have lost plenty of jigs and fish due to my spinning reel not having enough stopping powere and braid being to light. I want to give a avet reel a try. Iv been looking at the HX Raptor and the HXJ Raptor. witch of the two would you recommend best for fishing with 100lb braid for jigging and occasionally bottom fishing? the water where I fish is normally 250-400ft.
For the HXJ you will be looking at less than 300 yds capacity with 100# braid, may be too short a length for your needs, the standard size HX a better option.
300 yard only ? Won't be using a top shot. I'll be going full braid. I was under the impression the hxj held about 400 of #100. Dose avet not put out accurate specs on line capacity?
So which AVET models will seat in the Okuma Travel Rods? I am considering an AVET. The ALPS seat is approximately 3-centimeters wide and did not fit a few of the models that I tried out. I don’t want to mill any of the seating studs down either.
The Nomad rods using the ALPS seat will have a problem with the standard reel foot on the SX and MXJ/MXL reels. All other models are no problem. The SX and MXJ/MXL can work with replacement of the standard foot to the Narrow Reel Foot which we stock.
Will this reel work well with 50-70lb braid on it? Was looking to use it to catch some big 60lb+ blue catfish. I don't know much at all about drag systems is 14lbs pretty hard to pull out? The only baitcaster I use right now is the Shimano Cardiff and it works well but I really want to try out the lever drag systems, Plus this real has an amazing appearance
+caleb smith You should watch our video about setting the drag on a lever drag reel in order to gain some understanding about how a drag system works. You can put 200# line on a reel - that doesn't mean it fishes that test appropriately. The Avet, any Avet, will prove a stronger piece that what you have been using.
hello CharkBait i recently bought a Proteus conventional boat rod prtb80xhf 8' 30-60 mono (70-120) braid well wanted to ask which avet reel would you recommend i pair this rod to thank you .
Toss out the braid rating and focus on the mono rating for the rod. With a 30-60, you're looking at a rod that will probably best load up at 40-50# (line test indicating appropriate drag setting - most important point since that determines the bend under load). So, with that as backup, I'd strongly lean towards the JX - prefer the 2 speed, The LX and HX can work for you, too. Remember, it's all about the drag setting as a function of the line test. Set the drag up properly so everything works in your favor.
I fish my JX 6/3 MC for that application mostly. The MX series Raptors cover it well, too. If you have larger hands the HX can also fill the bill. Typically 40-50# leader is what's fished, braid backing for capacity.
Best to contact our shop directly, phone or email. The recommendation will be based upon your input, need a two way conversation and going thru YT isn't a winner - I don't typically get back on the video comments. Visit our site and/or give us a call www.charkbait.com
What reel would you use for pier fishing Florida east coast and for jigging/trolling/livebait fishing from boat as well ? Looking for best one does it all option . Thanks 🙏
The right model will depend upon the line test you wish to run. Line test determines how much drag is necessary, total line capacity needed. So, without more info I really can't offer much help. But, if it's your intent to run say leader tests of 50-60#, common for the trolling side of things and practical for other uses, then I'd lean towards the HX 5/2 or perhaps LX Raptor. If it's 40-50#, then a G2 LX can cover you.
SoCal average size, should be no problem. The MXL is best suited for fishing up to 30# lines with appropriate drag loads. If you need to go heavier, we'll need to look to larger model...unless you go Raptor version.
"20 pounds measured at strike" does that mean starting form the position where the drag is at the "strike" position there is 20 MORE lbs of drag? thanks mr, like your shop, your web models aint too bad either
Can't really speak to the rod, don't work with Lami. It's probably a question of line test, drag setting, that's what's going to influence the rod selection. The SX is good for up to 10lbs measured at strike. So, figure that based upon it's drag capability the reel can fish UP TO 30lb lines properly. If that fits with the rod, then it should be just fine as a match.
It won't work unless you get the narrow reel foot. The stock foot on the SX/MX series will not work on the Nomad rods with triangular shaped reel seat. We do stock the narrow foot.
@@caseycoffey1 Sorry for my oversight... The SXJ does come with the narrow foot - no clamp supplied for the J model. So, you are good to go. For a Raptor version, the foot would need to be downgraded to the narrow foot (no reel clamp).
I'm sorry sir. Let me introduce myself, I'm from Indonesia. I want to ask about the product from Reel Avet 5.3.0. I've been using it for about 2 years. I'm here. I have a problem with my fishing rod. My Dogvaser is missing. My question is, do you sell any parts. I hope you can help. me because in my country no one sells it. thank you
We do not sell the parts ourselves, but Avet does and they can supply worldwide. Contact them thru their website: avetreels.net. They do have parts list and ordering available. They can assist. Worse comes to worse, email maria@avetreels.com she handles parts for the firm.
It's going to be a matter of the line test you need to run. That will determine the capacity needed and importantly the drag setting required - and that will influence which model reel makes the most sense. I'll offer that likely you may be running say 50# braid, with a topshot of mono/leader of maybe 30#. If so, look towards the MX G2 series of reels.
I’m running 50# braid maybe 80# fluorocarbon because it has less stretch then mono but strong then braid. If I’m fishing braid I’m fishing a 50# mono or fluorocarbon top shot.. so which one should I pick?
@@kobi1125 So, you'll need a reel capable of fishing 50# line (that's the lightest on the reel) so having a drag capable of pulling 15 lbs of drag measured at strike is where you should be (and best to have more than that available). So, a G2 JX can cover you well, with a Raptor version even better, the MXL or MXJ Raptors can also cover from a drag standpoint. The low gear on the JX will have more pulling power, it's 4:1 on the MX and 3:1 on the JX. If the fish are say under 50 lbs, the low gear ratio not so critical. But, if the fish are larger, no doubt dropping down in gearing is beneficial. Next consideration, depth. If under say 300 ft, line capacity won't be an issue either way. I'm leaning towards the MXJ or JX - both the narrower versions within the MX and JX/LX series.
Visit our website for all variants - single speed, two different gear ratios, two speed, all with or without magnetic cast control and Raptor versiosn.
I'd like to try that setup, but I'm kind of hesitant because I only fish on party boats and I don't want to be that guy with the braid that gets tangled with everybody. Lol
More than a normal reel, and more than a normal value given their performance and construction materials - note MACHINED ALUMINUM, not cast or a composite, excellent freespool for great casting, etc. Yes, Accurate's do have higher drag, and now they also have longer warranty life and factory servicing during that period, and yes you do pay more and get more - but it's subjective. No getting around the fact that Avet reels are excellent pieces. Now if you take Raptor verses Accurate, we have a more even playing field - apples to apples and a more interesting comparison to make.
Some models have more, some less, depends upon what is being compared. Taking a standard first generation reel compared to Accurate, well we're looking at half the price...or less for the Avet. Now, if we go Raptor as the comparing piece to Accurate, then the Avet offers more drag capability, magnetic cast control, etc.
A 50 is a 50, it’s the other unique sizes which don’t follow an industry standard which leave folks confused typically. SX, MX, HX, LX: those models warrant the focus more than 30/50/80… But your point is well taken and perhaps a revision on order.
@@danmadgett1513 solid/hollow it makes no difference in terms of diameter or “drag.” Hollow has several benefits as line tests increase. Knot diameter drops, allows for hollow to hollow splicing, capable of spliced loop for fishing wind-on leaders, allows for in-line knot less connection of leader to braid for 100% test connection vs a knot connection which by definition losses test… many advantages of hollow core but subjective whether those benefits are justified.
One of the best videos on UA-cam explaining Avet reels. Thank you so much for this video.
Thanks for visiting our YT channel, and please do visit our shop's website: www.charkbait.com You will note we offer excellent value, including braid and mono rigging on most models.
Thanks for taking the time to make a video like this. Very informative and will last for many more years. Thanks
just ordered my fourth sx from u guys. best deal u can find on the internet period and free shiping! love the reel!
Finally starting to make sense of your Avet reel comparisons and suggested fishing applications. GREAT breakdown of the info on these "go to reels".... Thanks !!!
Thanks, glad it was helpful John.
thanks your for doing the fantastic overview - very informative and great seeing the physical difference against each reel - plus also nice getting suggestions on application and what to spool with
Hello Mark , getting ready to order an Avet reel and this video was just what i was looking for, Thank You
Excellent video! Exactly what i needed. Thanks for making
Always a great and informative video!!
Just stopped by charkbait yesterday to get some advise on a good 20-40 size rod and boy you guys are very informative I was talking to Beta for at least 1hr just discussing about rods and fishing tips in general. I'll be there today as we'll to pick up some fishing supplies.
Beta is a great source of information, lots of info shared by him and he can help get a person up to speed.
I have 2 SX (one a raptor) and an MXL, LX, HX and HXJ and absolutely love them. I have them on a couple of the rainshadow rods the guys sell, and couple of united composite rods and one of the toro tamer travel rods and they cover all my saltwater fishing needs from here in NC bottom fishing, and on all my trips down to florida to fish the middle grounds and the dry tortugas. Mark and they guys are where all my rods and reels came from. Super helpful and really work hard to keep customers happy.
Thanks for the kind words, and glad our team meet your expectations. Good fishing to you!!!
Thanks so much for your videos. I'll be purchasing from you all
Perfect Video, Avet doesn't do a great description on the size/capability of their reels. You helped me out greatly
+Matthew Giacone Thanks Matt.
This was a very informative video and I really appreciate it thanks so much
great information. I have a Sx raptor and a Mlx MC, great reels.
Thanks for the video.
Thanks for the info. I'm confused on which reel to get now. I was leaning towards an avet mxj or mxl, but the penn fathom star drag reel looks pretty good too. Too bad it doesn't have cast control though.
Great video. Thank you!!!
Very nicely doen. I was wondering which jigging reel to buy.. Now I know, thanks.
Thank you for this video
Thanks, very helpful
So far i got the sx ex30 and ex50w and i love all 3 ive pulled up some big fish with the sx and it handled them like nothen
THX!!! Well done!
6:10 is just brilliant info. I gotta give Mark a call and see what U.C. blank he recommends for an LX Raptor filled with 40# JB to be used for 5/7oz. iron jig casting to school tuna.
thnks 4 ur best info.what about for 40 lbs mono and spectra underneath fishing for tuna? what seeker rod ? thnks again
I was thinking of getting the hxw for tarpon and kingfish from a pier, down here in Florida. I was wondering what and how I should spool it with. I was thinking braid backing and mono top shot of about 40lb or 50lb. Would you suggest that for this reel
hi! ill be fishing for tuna.i do want 25 lb test line and 40.whats the type of avet reel is suited for this that i can cast the bait and will fit on seeker rod and what type of seeker rod.planning to put spectra underneath ..thnks...
I'm planing on fishing Catalina and channel islands and some San Diego. Which reel should I get to pair up with a seeker stealth rod. Planning on going for yellowtail and white sea bass
Can you use the magnetic cast knob to also alter clicker tension in free spool once your bait is already in the water? For instance, if I'm fishing for fish that are spooked once they feel the tension/drag of that clicker when it's on. I believe you can do this with the Okuma Andros with their cast knob but I'm wondering if you can do it on the Avet reels, and in the particular the SX MC 5.3 model.
Im thinking o get the lx or the hxw. which one would you suggest for king fish, shark, and maybe a tarpon, a dividing factor is how's the free spool for both. I heard the hx does have a great free spool
Thank you
do all the Avet reel feet have compatibility issues with Alps seat on the Okuma nomad salwater rod?
Hi Mark, awesome videos, I just wanted to share something interesting I found out with a buddy of mine who land based shark fishes as well. I was testing the drag on my avet LX with a properly calibrated scale and I found that, even with the preset nowhere near locked down, pushing 21lbs at strike, and 30lbs at full with perfect free spool too, I had it attached to a rod but the preset could easily be clicked down 10 more turns and we already well exceeded the drag ratings no problem. my friend has an 80w and said if he cranks the preset up he pushes 100lbs easily, I thought he was joking but I tested it out for my self on my LX and damn, they really do put out at least 60% more drag than there rated... by any chance have you or your customers noticed this as well?
Yeikes talk about a late reply... Yes, Avet reels can produce more drag than manufacturer states BUT one should not exceed their numbers. You're moving the spool across a plane, go too far and right side spool bearing can be damaged. Do not exceed mfg parameters for best long term performance. Those that do go beyond the limit will pay a service price replacing bearings.
I have a question about rock fishing. I'm planning on going rock fishing out of channel islands. I heard they got some monsters there. Is a 30# setup ok or would I need to bump it up to a 40# setup?
Thanks for the reply and help, how long of a rod should I put it on? I was thinking 8-9ft of a rod because Everyone Tells me i need a rod that size to get it out farther is that true?
what size would you reccomend for jigging atlantic cod and possibly tuna up to100lbs
Hey I currently have a 50w and mxl mc and love them but I was thinking about getting a sx or mj for redfish, carp, catfish, and maybe trolling for largemouth, which one would you prefer? Also on bdourodoors I saw avet just came out with a sxj but I think that'd be a little bit too narrow for what I like
I'm going to purchase an 80W 3 speed this week. Do you have a gold one (right handed) in stock? How much would I expect to pay postage to OZ using express or something quicker?
Would the lx have enough line and drag to stop a big kingfish and small sharks
Hello. I have an 8ft 20-50lb penn carnage deckhand rod. I'm looking for a reel that will handle both casting and bottom fishing. What do you think of the mxj or mxl?
hey in need of some help here. im looking for a reel that fits my fishing best and not to sure what avet to go for. im looking for a sturgeon, halibut, salmon ,albacore reel because thats what ill mostly be targeting. i do trolling jigging and live bait. whats your best recommendation. im a california fisherman
which Avet reels best suit for trolling or downrigging?
I own a MXJ MC and a Diawa Saltiga 2Speed. I wanted to get another Avet Raptor (should have gotten the MXL Raptor before). I fish waters out of So.Cal/LA mostly, but sometimes go into Mexico on overnights out of San Diego. I was wondering if I should get the HXJ Raptor (it's on sale and only about 20'ish more than the MXL Raptor. Is the HXJ overkill? Would I ever need the reel that big?
I fish shimano product, I fish off of deerfield pier in southern florida and I have to cast off a Pier I used a Torium 16 on a 7ft rod and i was thinking about getting a avet as my next reel but but I don't know which one would be better for casting and how long of a rod it should go on I plan on putting around 15lb mono on it. I would be using it as a casting reel for kings, bonita, and big mackeral.
I finally found an Avet reel at a local store but the storekeeper didn't know anything about them. They had a HXW on the shelf.
Now that I actually saw one first hand, I want to buy one that is:
HXW size.
Lever drag feature.
RAPTOR for higher drag.
2 Speeds.
MC for aided cast control.
Which model number do I need to order?
I made an update to this video which may prove helpful to you. Also, please visit our website - CharkBait.com and navigate to the Reel section and then the Avet G2/Raptor page. There you'll find the information on the model you are interested in getting as well as our special offers on the reel. Visit CharkBait!
Thank you for the reply! I just have one more question (sorry): I normally like to fish with circle hooks; between the free spool clicker and then moving the lever to strike on this reel (or lever drag reels in general), will hook ups be an issue when using circle hooks?
No
if i get a single speed lx 6.0 do i get 300 yards of braid for buying it plus mono, or do i have to pay for braid
If I get the reel from your website. I heard you got some kind of free line. And how much would if cost to have braid backing 60# and bearkly big game 50# or 60#
Mark, I know you're not a tinkerer with reels but if you get a chance buy a spool bearing kit for any Avet reel of yours and give it a whirl. I bought a Boca Bearing ceramic kit for my MXL and my basic soccer field casting test has me gaining nearly 25% in casting distance. No need to replace all the bearings, I think it's useless to buy all 6, but the spool bearings do make a difference. I added a brake bearing also but only because the brake bearing on mine had seen better days. For $40 or so, if I can get a jig to fish before some other guys it's well worth it to me.
Been there done that on my MXL Raptor, and yes the benefits are there though the dividend is not great for me. I have learned many ways to screw up an otherwise good cast... Avet took care of me on that upgrade after I'd hammered the reel, or rather a large bluefin hammered the reel - she felt pretty squirrely after a 4 + hour fight and fail with pulled hook.The folks at Avet wanted to try out the ceramics, I was their guinea pig. I've not gone that route on my JX's. No doubt they'd benefit, but I'm also not convinced the ceramics will last as long as a very good stainless steel bearing, but I'm just a plunker and not that critical over the benefits provided thru upgrade. Others certainly can benefit more than I from that upgrade. These days I'm really not so competitive at the rail, 209 years ago, perhaps a different tale. If I were doing more "combat fishing" aboard a 1/2 or 3/4 day boat, no doubt I'd have a different perspective. But, I tend to ride the large long range boats, extended trips or private boat. In either of those situations, I'm not fishing in a competitive way, I pick my shots, catch a few fish and enjoy watching and learning from others. On our LR trips, I'm usually in the background taking pics and picking my shots for opportunities. I get the opportunity to fish, on the water for 30 days or so each year, so just a little luck can result in a plugged freezer for the year, and wife has me on a leash about how much to keep.
@@CharkBaitUSA same reel I've just put them in the MXL Raptor. Happens to be my favorite Avet and probably second favorite reel next to the Makaira 10ii. I haven't really had any issues with spool bearings on my Avets. I have replaced a few brake bearings and pinion bearings over time but overall I haven't seen the Avet bearing issue you read about online. I think people are just negligent and fish 65lb line on an SX and have the drag ramped up to where the reel barely spins. Even on my own boat I'll be casting at surfacing fish along with ten other boats many times so the extra distance is a factor. Not a big factor, but enough to convince myself it's worth $40! If my wife knew how much I spend on fishing, I'd be very lonely at night but im very lucky in that she's a chef so I could bring in all the fish I want although I don't keep a ton of fish. Enough for sure, but I'm not like some guys I see that have 4 freezers for fish and haven't made a dent on fish they caught a couple years ago. All the best.
@@jeffsmith825 - I bought my first MK10 after being spanked by that bluefin mentioned in my earlier post. That gave me the lower gear I wanted to turn the heads of fish and keep 'em coming my way. The MXL Raptor gets more casting duty, jigs, bait, iron. The MK10 for when things get more serious at 50# and 60, my MXL Rapt. and JX's at 40#. You are absolutely right about bearing failure, typically it's the fisherman's fault for trying to fish more drag than the reel was designed to do...thus a crunched bearing.
@@CharkBaitUSA the MK10, to me, is the best reel I've ever fished. I was in the Bahamas last year and caught a 142lb yellowfin pitching live bait on the MK10. The next day used it to troll for wahoo. I have even caught 80+lb Amberjack on it. Stopping a big AJ before it gets into the rocks is a tough ask and the MK10 performed flawlessly. It's just a beautiful piece. Not my casting reel but it's damned versatile. I've gone to the Accurate ATD 30's for heavy trolling, but I feel like I could catch anything that swims on the MK10. We are on the same page.
important questionn, why is there an extra charge of 30$ for avets in red?
ok let me see if I remember correctly... it's
[SX MX], [JX LX], [HX HXW],
then it's 30 50...
thanks for this video. I am looking for a nice $400-$600 reel for a gift. No Avet retailer near me so having to decide on reel from internet photos is tough cause they ALL look the right size. looking for smallest physical sized reel with 35# to 40# of drag with capacity of 500yds of 40#braid that is 2speed lever drag
Visit our website for the specs: www.charkbait.com/cs/csrAvet-2.htm
The JX Raptor covers the drag mentioned, but will hold more like 500 yds of 60# braid. The MXL Raptor or even the MXJ will cover the line test and capacity mentioned, and fish those lines fine with it's given drag capability, but you are mentioning drag levels greater than needed for the line test mentioned. No reason for the extra drag pressure, given it should be about 30% of the line test being used.
Hi Mark, I just bought MXJ 5.8 Single speed today. I'll be going on a 3/4 day in may and I wanted to hear what you think this reel would be ideal for as far as uses. You are very knowledgeabale and I would like to hear what application you would recommend this reel for.
Thank in advance,
-F&H
FishandHook TV If you picked up the reel from us, no doubt staff here offered sound advice in terms of capability, spooling, etc.
I bought this in quite a rush because i saw a deali couldn't pass and had to go to work shortly after. Not to mention the traffic that day. I was thinking of getting it spooled at Charkbait so i guess i'll save my questions for later. However, if you feel like shedding some light on "common" uses then i'll take any advice. Thanks anyways.
FishandHook TV The reel will cover your needs from 30# down to 20# test lines. What can you catch? Well I just got back from a 2 day charter, good yellowfin and bluefin fishing up to 60# fish. 30 and 40 was what we used, dropping down to 25# on the leader at times. The MXL would have handled most all of the fish. So, on a 3/4 you are in good shape I'd say. Next rig for you would be a 40# outfit, for that the JX is tops.
Is there such a thing then as something close to a "HXJ 3 MC RAPTOR"?
HX + (J narrower=same as LX?) + Raptor= higher drag rating + MC= magnets in frame to aid casting?
3= 3speeds?
Yes! Avet is now making the HXJ 3 speed - Raptor.
Mark,
I finally found an Avet reel at a local store but the storekeeper didn't know anything about them. They had a HXW on the shelf.
Now that I actually saw one first hand, I want to buy one that is:
HXW size.
Lever drag feature.
RAPTOR for higher drag.
2 Speeds.
MC for aided cast control.
Which model number do I need to order?
What is the purpose of the tension knob on lever drag side? Thanks, newbie here!
nmigliore that is NOT a spool tension knob, it is the pre-set drag adjustment. That is how you adjust the drag RANGE of the lever. IN Freespool ( lever back ) you adjust the knob more or less, the use the lever and push it up to ‘strike’ position, and check the drag with a scale. If you want more or less poundage, go to freespool with the lever, turn the pre-set, and back to strike with the lever. Check with scale. Same thing with max drag position. The strike and full positions are not independent though. Set for one position, the other is what it is. Hope that helps.
Do you recommend the HX series for the large bluefin that have been around in the 100-150 pound range? Thanks
Absolutely!
+CharkBaitUSA thanks, one more thing though. Can I cast that bad boy with a large popper or sardine and if so what size rod and a brand of your choice would you think? I need the goods bro. I am 6 foot 1. Thanks for your time.
Iv done a lot of jigging by oil rigs and have lost plenty of jigs and fish due to my spinning reel not having enough stopping powere and braid being to light.
I want to give a avet reel a try. Iv been looking at the HX Raptor and the HXJ Raptor. witch of the two would you recommend best for fishing with 100lb braid for jigging and occasionally bottom fishing?
the water where I fish is normally 250-400ft.
For the HXJ you will be looking at less than 300 yds capacity with 100# braid, may be too short a length for your needs, the standard size HX a better option.
300 yard only ? Won't be using a top shot. I'll be going full braid. I was under the impression the hxj held about 400 of #100. Dose avet not put out accurate specs on line capacity?
So which AVET models will seat in the Okuma Travel Rods? I am considering an AVET. The ALPS seat is approximately 3-centimeters wide and did not fit a few of the models that I tried out.
I don’t want to mill any of the seating studs down either.
The Nomad rods using the ALPS seat will have a problem with the standard reel foot on the SX and MXJ/MXL reels. All other models are no problem. The SX and MXJ/MXL can work with replacement of the standard foot to the Narrow Reel Foot which we stock.
CharkBaitUSA Thanks! Good to know that there is a solution.
Will this reel work well with 50-70lb braid on it? Was looking to use it to catch some big 60lb+ blue catfish. I don't know much at all about drag systems is 14lbs pretty hard to pull out? The only baitcaster I use right now is the Shimano Cardiff and it works well but I really want to try out the lever drag systems, Plus this real has an amazing appearance
+caleb smith You should watch our video about setting the drag on a lever drag reel in order to gain some understanding about how a drag system works. You can put 200# line on a reel - that doesn't mean it fishes that test appropriately. The Avet, any Avet, will prove a stronger piece that what you have been using.
+CharkBaitUSA Will do thanks!
hello CharkBait i recently bought a Proteus conventional boat rod prtb80xhf 8' 30-60 mono (70-120) braid well wanted to ask which avet reel would you recommend i pair this rod to thank you .
Toss out the braid rating and focus on the mono rating for the rod. With a 30-60, you're looking at a rod that will probably best load up at 40-50# (line test indicating appropriate drag setting - most important point since that determines the bend under load). So, with that as backup, I'd strongly lean towards the JX - prefer the 2 speed, The LX and HX can work for you, too. Remember, it's all about the drag setting as a function of the line test. Set the drag up properly so everything works in your favor.
Mark, which Abel reel do you recommend for wahoo fishing with bombs
I fish my JX 6/3 MC for that application mostly. The MX series Raptors cover it well, too. If you have larger hands the HX can also fill the bill. Typically 40-50# leader is what's fished, braid backing for capacity.
What rods do use/recommend with the Avet JX 6.0?
Best to contact our shop directly, phone or email. The recommendation will be based upon your input, need a two way conversation and going thru YT isn't a winner - I don't typically get back on the video comments. Visit our site and/or give us a call www.charkbait.com
What reel would you use for pier fishing Florida east coast and for jigging/trolling/livebait fishing from boat as well ? Looking for best one does it all option . Thanks 🙏
Also as a left hand option ....
The right model will depend upon the line test you wish to run. Line test determines how much drag is necessary, total line capacity needed. So, without more info I really can't offer much help. But, if it's your intent to run say leader tests of 50-60#, common for the trolling side of things and practical for other uses, then I'd lean towards the HX 5/2 or perhaps LX Raptor. If it's 40-50#, then a G2 LX can cover you.
I'm interested in a MXL MC. Would that reel be able to handle large bat rays from the bays and surf?
SoCal average size, should be no problem. The MXL is best suited for fishing up to 30# lines with appropriate drag loads. If you need to go heavier, we'll need to look to larger model...unless you go Raptor version.
Thanks Mark. I'll be fishing 50lb braid with 30lb top shot.
Will the sx fit on a baitcast rod with trigger grip?
It should fit most, can't speak to all.
Hey im looking for an avet reel, mostly fishing off the pier for Thresher sharks?
Lx 6.0 or Lx 6/3
"20 pounds measured at strike" does that mean starting form the position where the drag is at the "strike" position there is 20 MORE lbs of drag? thanks mr, like your shop, your web models aint too bad either
Could you fish both 50 and 40 on the jx
As a G2 version yes, in standard form really the JX is a 40# reel, not enough drag to really fish at 50# with appropriate drag load.
so mxl will be good at #30? and jx will be at #40?
Yep
I have an Avet SX 5.3 would it be overkill to pair it with a lamiglass Triflex 7040CT
Can't really speak to the rod, don't work with Lami. It's probably a question of line test, drag setting, that's what's going to influence the rod selection. The SX is good for up to 10lbs measured at strike. So, figure that based upon it's drag capability the reel can fish UP TO 30lb lines properly. If that fits with the rod, then it should be just fine as a match.
The rod line rating is 20-40 I believe with a 4-10 lure weight is that okay
Do you have any recommendations for the avet sx 5.3 if I'm fishing the dropper loop
Based upon what you mention in your replys, I'm thinking it's a fine match to what you have planned.
Thank you!
I'm looking into getting an sxj, and I was planning on putting it on my nomad express lol, are u saying that it definitely wont fit?
It won't work unless you get the narrow reel foot. The stock foot on the SX/MX series will not work on the Nomad rods with triangular shaped reel seat. We do stock the narrow foot.
@@CharkBaitUSA I'm talking about the sxj, the one with the thinner spool
@@caseycoffey1 Sorry for my oversight... The SXJ does come with the narrow foot - no clamp supplied for the J model. So, you are good to go. For a Raptor version, the foot would need to be downgraded to the narrow foot (no reel clamp).
@@CharkBaitUSA thanks!
I'm sorry sir. Let me introduce myself, I'm from Indonesia. I want to ask about the product from Reel Avet 5.3.0. I've been using it for about 2 years. I'm here. I have a problem with my fishing rod. My Dogvaser is missing. My question is, do you sell any parts. I hope you can help. me because in my country no one sells it. thank you
We do not sell the parts ourselves, but Avet does and they can supply worldwide. Contact them thru their website: avetreels.net. They do have parts list and ordering available. They can assist. Worse comes to worse, email maria@avetreels.com she handles parts for the firm.
I have a question. When you set your drag at 25-30% of line test, is that for mono only. Is it different for braid?
So which reel is roughly the size of shimano toruim 20hg?
I do not support shimano products, so I cant be too exact about physical size, but line capacity specs similar to a JX.
+CharkBaitUSA thank you
+CharkBaitUSA how dose the mx line cast compared to the sx line
Which one do you recommend for cod haddock pollack fishing?
It's going to be a matter of the line test you need to run. That will determine the capacity needed and importantly the drag setting required - and that will influence which model reel makes the most sense. I'll offer that likely you may be running say 50# braid, with a topshot of mono/leader of maybe 30#. If so, look towards the MX G2 series of reels.
I’m running 50# braid maybe 80# fluorocarbon because it has less stretch then mono but strong then braid. If I’m fishing braid I’m fishing a 50# mono or fluorocarbon top shot.. so which one should I pick?
@@kobi1125 So, you'll need a reel capable of fishing 50# line (that's the lightest on the reel) so having a drag capable of pulling 15 lbs of drag measured at strike is where you should be (and best to have more than that available). So, a G2 JX can cover you well, with a Raptor version even better, the MXL or MXJ Raptors can also cover from a drag standpoint. The low gear on the JX will have more pulling power, it's 4:1 on the MX and 3:1 on the JX. If the fish are say under 50 lbs, the low gear ratio not so critical. But, if the fish are larger, no doubt dropping down in gearing is beneficial. Next consideration, depth. If under say 300 ft, line capacity won't be an issue either way. I'm leaning towards the MXJ or JX - both the narrower versions within the MX and JX/LX series.
Ok thank you very much and great video
does the jx come in 2 speed and mc
Visit our website for all variants - single speed, two different gear ratios, two speed, all with or without magnetic cast control and Raptor versiosn.
thanks just ordered the jx raptor from you guys what rod do you recommend I'm running #50 with #40 top ?
I'd like to try that setup, but I'm kind of hesitant because I only fish on party boats and I don't want to be that guy with the braid that gets tangled with everybody. Lol
Avet are normal reel with lower drag then Accurate. So don't expect a miracle from it. you just get what you paid for.
More than a normal reel, and more than a normal value given their performance and construction materials - note MACHINED ALUMINUM, not cast or a composite, excellent freespool for great casting, etc. Yes, Accurate's do have higher drag, and now they also have longer warranty life and factory servicing during that period, and yes you do pay more and get more - but it's subjective. No getting around the fact that Avet reels are excellent pieces. Now if you take Raptor verses Accurate, we have a more even playing field - apples to apples and a more interesting comparison to make.
Some models have more, some less, depends upon what is being compared. Taking a standard first generation reel compared to Accurate, well we're looking at half the price...or less for the Avet. Now, if we go Raptor as the comparing piece to Accurate, then the Avet offers more drag capability, magnetic cast control, etc.
Mxl all the way
these reels cost too much for me
Absolute waste of time !
Why didn’t you show us the 50 and 50w ?
I watched the whole video waiting for the 50 ?
A 50 is a 50, it’s the other unique sizes which don’t follow an industry standard which leave folks confused typically. SX, MX, HX, LX: those models warrant the focus more than 30/50/80… But your point is well taken and perhaps a revision on order.
@@marksmith4452 do you use 16 strand hallow core on trolling reels ?
Or does the flat line create to much drag !
@@danmadgett1513 solid/hollow it makes no difference in terms of diameter or “drag.” Hollow has several benefits as line tests increase. Knot diameter drops, allows for hollow to hollow splicing, capable of spliced loop for fishing wind-on leaders, allows for in-line knot less connection of leader to braid for 100% test connection vs a knot connection which by definition losses test… many advantages of hollow core but subjective whether those benefits are justified.