This engine assembly isn'y done correctly and people must not follow this as guideline else the engine will be ruined. Firstly, as some has already commented there isn't any lube applied during assembly. Is a big no no as the initial start would cause great damages. Second, you shouldn't crank the camshaft without installing the timing belt with proper timed engine. It will create valves and pistons interference that causes huge damage. Not trying to be rude, just highlight the importance of proper engine assembly. Thanks for your video anyway!
@@mudderscotch4017 Since it is a Nitro engine, can applied a coat of nitro fuel or after run lubrication oil to it pistons, cylinders, rods and bearings. While coat model grade grease on the camshaft and rockers since it does not meet with the nitro fuel while running.
Nitro fuel has heaps of oil in it so he did fine i mean just look at new engines made by O.S they run forever and they have a drop of machine oil so his building is just fine you try grease or huge amounts of oil and watch how many glow plugs burn out.
Definitely don’t begin by using a drill to put the screws In like did, or the lack of oil, or turning the crank before installing the timing belt (The belt he put around the three pulleys right before the fan). This little engine is certain to have an early death and overhaul.
I must ask you as a mechanic and I am not a engine builder but obviously the engineering is done but would you assemble a normally aspirated engine in this way and I don't need to know about the lubricant.
Holy shit dude i can't believe you didn't snap the heads off those bolts using that impact but driver dam! Or pull the threads out of the block thats way too tight you're going
Unless it wasn't shown, my guy built this thing with no assembly lube. *facepalm* He should have bought some more chickens instead of this model engine. Much more sustainable!
This engine assembly isn'y done correctly and people must not follow this as guideline else the engine will be ruined. Firstly, as some has already commented there isn't any lube applied during assembly. Is a big no no as the initial start would cause great damages. Second, you shouldn't crank the camshaft without installing the timing belt with proper timed engine. It will create valves and pistons interference that causes huge damage. Not trying to be rude, just highlight the importance of proper engine assembly. Thanks for your video anyway!
The way he screwed in the cylinder head 💀
Quick question ik in a big actual gas car motor you can lube the parts with oil but what do you use for these little things
@@mudderscotch4017 Since it is a Nitro engine, can applied a coat of nitro fuel or after run lubrication oil to it pistons, cylinders, rods and bearings. While coat model grade grease on the camshaft and rockers since it does not meet with the nitro fuel while running.
Nitro fuel has heaps of oil in it so he did fine i mean just look at new engines made by O.S they run forever and they have a drop of machine oil so his building is just fine you try grease or huge amounts of oil and watch how many glow plugs burn out.
Stick to funny animals kid
A perfect example of "using the right tools for the right job".
Cikal bakal pembuatan mobil. Entah jenis apa. Saya yakin episode berikutnya akan merancang sasis dan body mobil. Ditunggu episode selanjutnya
Chanel indo yg komen org luar semua
Mantappp haha
The goat is screaming in the back
He is from India. Anyone Cant expect him doing this in the right way with the right tools.
Right dammmmm Punjabi 😂
Baru taubada chanel sebagus ini duhh..
Sounds like the cylinders are opposing each other. Nice though!
Psicólogo veja algo que lhe acalme:
Eu vendo vídeo de um mini motor cortando giro kkk
I have one too, and I only had gas and it worked.
No it can’t. It’s nitro fuel - the type typically used for RC cars.
Смотрел с таким интересом как будто разбираюсь в этом 😂крутые видео создаёшь,продолжай в том же духе🔥
10:01 Adhan sound 😍
MashaAllah love from Pakistan 🇵🇰❤️
Salam dari Indonesia@@its_steward
Sure running it with no lube or oil and revving it to the moon on cold starts is a great idea
I heard cartons kids laughter chickens goats I heard it all lol I’d sure love to see a chicken in a nitro car please 🙏🏽
Great video. I will be building my L200 soon.
Beli dimana bang?
Super cool, I wouldn't even know where to begin.
Definitely don’t begin by using a drill to put the screws In like did, or the lack of oil, or turning the crank before installing the timing belt (The belt he put around the three pulleys right before the fan). This little engine is certain to have an early death and overhaul.
Great video mate!
Thanks for your time 👍
Next level up from legos
Boleh tu
Crankshaft goes into the block first, then the piston and rod assemblies.
¡Gracias!
It's just a toy guys! He bought it, therefore he can do whatever he wants to it! Deezam!😂
Halo wong blora 😁
I must ask you as a mechanic and I am not a engine builder but obviously the engineering is done but would you assemble a normally aspirated engine in this way and I don't need to know about the lubricant.
nice bringrish, and you didnt ask anything haha
itu mesinnya apakah ada pakai pelumas (Oli)?
Enggak kayaknya
I would put it in a RC car or boat.
Serviria em RC truck escala 1/14 ?
@@diegoramos718 How cool would it be to make it water cooled in a RC boat. Lots of power in that RC boat probably too much.
sem lubrificação nas pecas antes a montagens, apertando os parafusos com parafusadeira em fila e não em X
Holy shit dude i can't believe you didn't snap the heads off those bolts using that impact but driver dam! Or pull the threads out of the block thats way too tight you're going
I think its has a clutch and can be adjusted to a max torque as desired. just enough to not snap the heads off
Coba Pasang ke rc bus pasti keren👍
Nice engine but u did not lubricate the cylinder to reduce the friction when the pistons is moving, is it possible to do that?.👍👍
i think that the cylinders came pre lubed because when he was fidiling with them his fingers were greasy
Any engine needs assembly lube. Never put parts together dry like that.
Rusty plyers, the do all tool.😂
Sehat selalu pokoknya
Excellent Rini Anita 💚👍
WAIT MY MOM'S NAME IS ANITA
How much does it cost?
Dilihat dr tangan seperti nya ini orang jawa
Almost sounds like a motorcycle
Terjangkau gmna bang2 mahal ini mah
Học ngành gì để chế tạo ra những thứ này vậy ad?
Por que este homem está montando motores sem experiência nenhuma?
Super
Why didn't you lube the engine ?
Can you tell me what lubricant or oil you use for the engine?
Snail slime
It's a 2-cyle motor it gets its lube from the NITRO fuel Not real motor oil.
Wow Toyan fs l200 engine
where did you buy it from
nice
Does it also run on 16% nitro fuel??
pake pertamax 1 liter full geber irit banget tuh
I know just a quick vid but dont you have to time those cams when you put that belt on lol!!
6:52 🐑= embeee...🤣🤣
Denger aja lu ngab 🤣🤣
How much did it cost you for the whole entire kit?
When you try to save a little money on a cheaper mechanic
Pokoknya josss🙏🙏🙏🙏🙏😁😁😁😁😁
Bang beli dimana dahh??
belinya dimana mbakk, dan harganya
It's a 2-cyle motor the lube is from the fuel premixed (NITRO) fuel It don't real motor oil. like a 4-strock motor
Waw apik dadi pengen
ohne ÖL zusammenbauen?
Harga brapa kak?
nice video but no oil , no grease for assembled your motor ???
Beli dimana kak
grease,oil no...................!!?????????????????
Oil?
आप इस में कोनसा तेल डाला जो यह चला और कितने मुल्य का आया
Beli dmna bang
Bang beli dimana ya
Unless it wasn't shown, my guy built this thing with no assembly lube. *facepalm* He should have bought some more chickens instead of this model engine. Much more sustainable!
Belinya dimana?
Suara nya seperti mesin pemarut kelapa
does that all come with the kit
Order dimana boss
It is available in India?
Keren
Bang belinya dimana?
Can you tell me where do I get those tools pls.
So amazing
Kalo beli dimana n harga nya brp?
Yes Sir
Beli nya dimana ?
Why you didn't use oil????
Small engine first time i seen
A Mini engine?
No flames 🔥??
Hey but where is the nitro
😊 can you buy that for me.
Nice man
Where Can a person buy this at. How much does it cost.
Around 600 for everything you see
@@gunnerolsen6734 how much hp and Torque does it have.
please put this engine into your rc build
where can i buy this? and how much is price
Some of this hurt to watch
Bravo complimenti
This are available in Pakistan
Ami ekta engin nite chai press koto
There was no sort of oil or lubricant to assemble the engine. Who did it even run??
2 tak
Your from which country ???
Where we can buy this type of engine
mesinnya gak pakai pelumas atau gimana bro
Harganya brapa?
harganya berapa bray?
Kak izin reupload ya buat upload di tik tok, kontennya sangat menarik sekali semoga saya bisa kayak kakak🙏🙏🙏