Yes I open ecu plate on both side and don't see anything burn. I try smelling ecu and nothing smell burn. Engine harness new. Before old harness might have something to do with it.
I was wondering ka24de ecu not turning while ignition is on, but the car still run. I check all fuse and relay are working, but don't know why ecu led not coming on. Could this be bad ecu?
So the led doesnt light up but the engine still runs? It's possible something on the board is burnt. Have you opened it up and inspected it for burning or corrosion?
Dohc ka24de 5 speed manual. Does number 3 pin on ecu harness need to have power while ignition on or No? I check ignition signal wire and no open loop or broken wire. Could be bad coil, but I don't see how because I have 4 ignition coil and all cannot be bad.
I believe number 1 thick white color and number 3 yellow and red that ignition control module plug. I turn ignition on, and no power on number 1 pin. Could this be why it not getting spark? 2 other pin have power with ignition on.
I purchase NDS1 Android but it won't connect to my 1991 240sx using the USB consult adapter. This setup will work with my 1996 240sx.i created a minimalist harness with ECU and consult connectors only. ECU powers up but won't connect. I've tried 2 1991 240sx ECUs with no luck in and out of the car. Any ideas, hope you can help.
Hi, thank you for posting this video. Would you be so kind as to post written instructions or at least a diagram on what wires you connect to the DC voltage of ECU to get it to power up? I'd be very appreciative if you would. Also, is this how you would power up other or most ECUs? Thank you!
A lot of people still tune KA's, RSEnthalpy - Martin is very good, if you don't wanna bother with it yourself and afraid you might damage the engine, send your ecu to him, tell him what engine, turbo size, injectors, maf, and how much boost you want and he can do it and send it back. The initial cost is the hurtful part, but after that it's only 100 for a retune if you go bigger injectors or turbo. His tunes are super reliable and "safe"
Are there any major differences between the SR20 and KA24 ECUs? Considering an sr20 swap, and wondering if I can keep my stock ka24 ECU and just chip and tune without getting an sr20 ECU.
How do I power up a sr20de s13 ECU not sure which wires do what
Yes I open ecu plate on both side and don't see anything burn. I try smelling ecu and nothing smell burn. Engine harness new. Before old harness might have something to do with it.
I was wondering ka24de ecu not turning while ignition is on, but the car still run. I check all fuse and relay are working, but don't know why ecu led not coming on. Could this be bad ecu?
So the led doesnt light up but the engine still runs? It's possible something on the board is burnt. Have you opened it up and inspected it for burning or corrosion?
respect on doin all the ecus for everybody bro
Which pin send spark to engine?
What engine/ecu.
Dohc ka24de 5 speed manual. Does number 3 pin on ecu harness need to have power while ignition on or No? I check ignition signal wire and no open loop or broken wire. Could be bad coil, but I don't see how because I have 4 ignition coil and all cannot be bad.
I'm away from my pc to see a diagram but it should power when it motion is on
I believe number 1 thick white color and number 3 yellow and red that ignition control module plug. I turn ignition on, and no power on number 1 pin. Could this be why it not getting spark? 2 other pin have power with ignition on.
I purchase NDS1 Android but it won't connect to my 1991 240sx using the USB consult adapter. This setup will work with my 1996 240sx.i created a minimalist harness with ECU and consult connectors only. ECU powers up but won't connect. I've tried 2 1991 240sx ECUs with no luck in and out of the car. Any ideas, hope you can help.
Hi, thank you for posting this video. Would you be so kind as to post written instructions or at least a diagram on what wires you connect to the DC voltage of ECU to get it to power up? I'd be very appreciative if you would. Also, is this how you would power up other or most ECUs? Thank you!
Is there still anyone that can make tunes for the Ka24de ecu? Or is there a video on how to make your own custom tune
A lot of people still tune KA's, RSEnthalpy - Martin is very good, if you don't wanna bother with it yourself and afraid you might damage the engine, send your ecu to him, tell him what engine, turbo size, injectors, maf, and how much boost you want and he can do it and send it back. The initial cost is the hurtful part, but after that it's only 100 for a retune if you go bigger injectors or turbo. His tunes are super reliable and "safe"
great finally found some one who chips ecus!!!!
hi sir how can connect ecu from this
Can you live tune with those chips or do you have to pull it and burn and then reinstall ??
Are there any major differences between the SR20 and KA24 ECUs? Considering an sr20 swap, and wondering if I can keep my stock ka24 ECU and just chip and tune without getting an sr20 ECU.
Mase well considering the .4L displacement difference and the fact that the KA is naturally aspirated, then there’s probably a difference in the ECU
I think I can use a BDM100 to power it up.
Do you have high compression ka24de bins?