212cc Predator Test Run How Fast is it? Subscribe and Turn Notifications on Please.
Вставка
- Опубліковано 26 гру 2016
- www.gasbike.net?rfsn=520089.9536f
Leave comments if you have any questions about a video.
Subscribe for more Videos.
Join our Facebook Group for discussions on builds.
/ 1837515253190809 - Авто та транспорт
It's runs awesome. U might try adding 2 dampers on both sides of the handlebar for extra stability . It's wobbles alot
damn...serious torque on that thing ....almost knocked you off it at take off lol AWESOME !
Anjo Da Noite lol yep when i get another torque a verter plate i wanna put some wheelie wheels on it
3:07'wtf happened there?!! Looks like you wheelied onto your @$$ then somehow held onto it and continued riding:D epic $h!t man
Lol See what happen was My Annie turned the street I just came form and I didn't think she would notice me lol I thought she was just gone pass by but she waved and that took my focus off
I hit the gas down all the way lol it caught me off gaurd
Getting ready to put one of these on a Micargi Cyclone frame. Can't wait!
Nice man, Looks torquey as hell!
You can pull some shit with that.
whoa!! fast!!!! wow!! now I would be worried about the quality of the base bike itself,....stuff like welds, rims, forks, and brakes. so much could go wrong so fast going 40 mph. when I do 30 on my Chinese 80cc I feel like I need to slow it back down before the fork welds break or the chain pops off. but wow, that thing is fast! (and heavy) the messed up part is that to move up to the next level base bike, the build cost goes from 3 or 4 hundred to 7 or 8 hundred. a lot of ppl say oh,.. ill buy another cheap bike when this one breaks,... there isn't going to be a tomorrow if it breaks at 40+mph. if there is,.. you wont be the same
robert smith lol the welds wont break hopefully
I had a chain wrap around the rear wheel at 60mph and crashed im still around lol
Buy the engine from harbor freight and buy the transmission separately use the basic stuff from you original kit and swap the rear sprocket for a BBR sprocket that mounts to the hub itself that’s like $300 for the entire kit my bike hit 38 and was super sketchy then I upgraded the forks to heavier suspension forks which may get replaced soon and now it feels like a slow 125 😂😂😂
Engine is $119 at harbor freight and transmission was going for $89 on various sites
@@thakoalaking5022 it doesn't have a transmission. It's only one speed that the engine turns
That thing scoots!
I really like the custom hat rack too!
damn thats sick! i wish i had one
Love the running wheelie! So glad you didnt edit that out. I needed a good laugh. Sidenote: try to be safe i got hit by a car and now have a badly broken leg. I was only doing 15 to 20 on my 45mph capable bike. Its not that you have keep a close eye on yourself. Its everyone else on the road. I would love having enough torque to wheelie!
Sailing Vessel Drifter with Randi & Bob true we must watch everybody else
Sailing Vessel Drifter with Randi & Bob damn thats fucked up bro get well soon
Mine is a Predator 212cc bicycle with a torque converter this bike has been fully broken in and tested and is built by a experienced mechanic, not a kids toy does 75 mph and has enough power to wheelie at high speed this bike will beat just about anything racing from 5mph to 55mph and is surely the fastest bicycle you might ever see. come check it out, if you think you can handle the power make an offer, (UPDATE) I made custom t-bars for it, extended the pedals and straight piped it, installed K&N air filter, jetted the carb, installed better tires, it sounds extremely nice, looks and rides a lot better now, just haven't updated the pictures yet. Update #2: extremely bright headlight brighter than most cars rechargeable, lasts all day very loud custom removable stereo system powered by rechargeable brand new 12 volt battery good for a few days of LOUD music before needing recharged and installed on board cigarette lighter for any 12v accessories racking a few miles on it but still good as brand new because I take good care of it still haven't updated the pictures mainly because I'm afraid someone will buy it if I do lol if it's meant to go it will go, the way I look at it I can build another one and have a couple hundred dollars
LOLs, The Predator engines are torque machines! I wonder how well a Comet torque converter would hold up with a 36 tooth rear sprocket?
I am thinking about a update on mine from the 49cc 4-stroke which runs good with the 36 tooth sprocket right now. The only problem with
it is the T-Belt transmission and maintenance on it plus high 35 mph winds in the country.
That’s a harbor freight engine right? Yea I’m totally gonna do this looks like fun
Joseph Clements how much would you charge me for one?
Joseph Clements what state are you located in? Would like to commission a build from you using the same motor
If you build another one I'd like to buy one
Thanks, good job showing the torque
I have the same kit. How did you align the drive sprocket to the back one on the wheel? Ive gone through 2 chains in 2 days. Also I hear a lot about the torque converter breaking in half. Did that happen to yours or is it still good?
Did you have to do any welding to mount the engine
First ride(For the engine)? What's the recommended break in?
Nice. Speeding, running stop signs, losing control, traveling down wrong side of road, reckless riding, etc... great video.
Oh hi Karen! I was wondering when I was going to see your comment.
I can get a ticket for driving 45 mph in NYC, awesome
test run how far and fast is it?
What did you do to prevent your self from getting burned and how did you mount it
I won phone farming contest for 100$ about week ago i bought my 80cc bike kit first time for 96$ on ebay i should be getting it soon i can use climb hills on the roads and bike lanes here in utah.
Nice review I see that you must be using a coaster-brake on the bike? I've been running one on a 49cc 4-stroke and motorized bikes need a disc(s) brakes
or even the friction brakes to be safe. I've had the bike chain derail on me several times and that means NO BRAKES! You have to be extremely careful
running in traffic and towns. Thanks for the video review!
ezl thanks and no problem
I need a good front head light where did you get your new one??
Hey Family if u have time I really need to know how u mounted that. I have a cox chopper and a giant stiletto chopper I want to build on and can’t see it any other way but to mount a 212 pred on them. Any and all help would be greatly appreciate.
Me an my brother made two of them kinda like this but we didn't use a cvt clutch system we just ran a belt from the engine shaft to a drive pully hooked to the spokes an it does 42 mph but is doesn't have near the power at take off tho but they are fast once the belt grabs
nice. sound like a diesel with automatic gearbox:) smooth ride. well done!
Lol damn and Appreciate man :) ... and someone told me it sounded like a lawnmower before I out the straight pipe on it
What frame is this and also what mods have you done to the motor
Nice vid mane. outside of the engine, where can I find the rest of the kit that would fit the 212cc?
Willie Cowyin eBay
Looks like it gets up and goes. Gotta get me one.😍
Rick Pickell Yep, it do the only problem is the Torque a Verter its molded out of pot metal if you can find a Stainless steal Or Aluminum one then that will be good
Rick Pickell Im using the Death Row Kit
Rinegn Productions, take your backing plate to a machine shop and have a machinist make a copy out of steel or aluminum plate. Those backing plates make or break the whole Torque converter aka constantly variable transmission and good luck, I enjoyed your video.
Rinegn Productions torque converter lol
hey man i have a similar bike but i am looking to go across country. what are you running motorwise and bike frame. I had to hodify the shit out of what i have to make it work and its great to put around town but i need something solid and you look like you might have it. I choped out a huge frame genesis 29" cruiser
Jay Packs join the Facebook group in the description so i cans see pics
Jay Packs and do u have the Death Row Kit
message me men i really really really want to make it at least to west coast, ic i can i wll go back to the east. Im going to start a channel. I will post a video tomorrow or monday
no i have the "80" cc kit from amazon
What a thrill... Awsome
thanks man
I'm about to do a 4-stroke but I missed a 2-stroke thing I don't think I can do it. I'm going to build one anyway but there's nothing like a 2-stroke and that smell though
Good job, man! Sounds much better than your first video. Were you having mechanical issues towards the end of the video?
Myron Yamashita yeppp throttle broke
Myron Yamashita and i will check it out
how did you mount the sprocket to the rear wheel?
D0nUT3ATer i used the standard 9 hole assembly Sprocket that comes with stock motorized kits
Can you still peddle this bike or dose it take the peddle away
Glorious.
Very fast for a motor with that frame. Is it legal? What about getting it licensed as a custom bike. I have heard of that. I have seen home made bikes all the time.
my fav part of the video is starring at the ground the entire time
Did you remove the governor?
What kind of bike is that?
What size bicycle? I just picked up a 26 inch huffy cranbrook.
26"inch Scwhinn
I want to build my schwin chopper with this engine but I don’t want to cut out a part of the frame
Well theres no way your getting a 212 on that frame
kick-ass job.
Debbie Ursuery thanks Debbie ... My momma name is Debbie lol ❤️💛💙💙💜
Debbie Ursuery lol and ik u might be on some one else channel but hey 👍 lol
Probably make it cross the country on 5 bucks of gas! lol Nice ride! Good job.
Marc Brunet thanks bro lol and i wish $5 but 5 will last a couple of days
Is that governed still?
I have an issue that when i brake the bike turns off. Do you know what im doing wrong?
Laz C on a 212 or a 2 stroke 66cc? And its because of an Air leak some where check your head and you carburetor
I just bought one of this engines E bicycles are getting to pricey now and days but I’m not going to mess this up I’m going to take mine to my grandpa Burson house we are going to work together on it he knows more engines than I do I mess up so many times I know somethings that are basic but when it comes down to it I will get right good luck bro good job
Join Heavily Modified Motor Bikes Facebook group they will help u
Thank you bro I check it out but I think I will go with grandpa Burson first his really smart dude when it comes to engines stuff
Stock? Or upgrade the 212
What size chain is he using
Still running the governor. That's impressive.
How hard or easy is it to install please
Bike life brabrah!!!💯💪🏿✊🏿🔥
I’m curious if it would be possible to use an engine like this on a mountain bike equipped with a fully working front and rear suspension (which would address in part the issue of dealing with going 40+mph), 29 inch fat tires (for cross country and to buffer the high speed tolerances against the frame itself), having 3 different gearing sets to accommodate pedaling on said bicycle, a CVT for an electric motor, and gearing for a motorcycle. It would basically be a cross country vehicle that can be on the car and bicycle lane in different modes while having at least 3 different power trains to make it as reliable as possible.
The cvt would be important for the electric motor because in a Porsche 918 they use an electric motor to compensate for the clutch operation with the engine’s transmission by applying more power directly to the wheels when the engine power train disconnects from the transmission to shift in order to make acceleration more smooth. On a bicycle that would raise eyebrows because using a typical chain would be impractical given most eBike use a single gear as torque and motor speed isn’t an issue. But with a cvt it would allow a motor to get a higher speed without shifting to a higher gear ratio.
What I’m talking about with the triple transmission is that if you had a secondary shifter which could change the gearing system, you’d have 3 different transmissions for different purposes:
For pedaling, Let’s say you run out of gas or just don’t want to use any power at all. In that case you’d be limited to cycling on the road and in limited off road conditions. Shifting to normal bicycle gearing would be important as a motor can produce more torque input to power the vehicle up roads without needing as low of a ratio as your two feet would otherwise need, hence 2 distinct gearing would be necessary.
You would need the transmission and the fat tires because with thinner bicycle tires and a rigid fork for a suspension going as fast as you would on a motorbike at 50 mph or as fast as 80 mph would be massively impractical for a typical bicycle. So you would need a bicycle that can be as powerful and as big as possible to allow it to function as a motorbike while being light enough to be pedaled like a bicycle with dead weight (likely under 50kgs).
U can do it
Would be too complicated for reliability. Better off with a simple rear friction drive if you want the ultimate reliability.
Fast! Only 4 nickel sized brake pads tho! :) I gotta try this.
Sadly mines only get 35 mph till I upgrade her I have swinn point beach I added saddle bags an all they come in handy
Lol I'm crying over here ...what happened at the take off Eric....lol that thing got away from you ...lol too funny... that thing got some power talking off lol....
Danny Outlaw lmao I forgot how powerful that thing was 😂
@@RinegnProductions lol ..it was too funny bro I was laughing so hard your voice lol was like wooooo...how did you like the power of the 212 compared to our 2strokes?? I know you are running the sthl cylinder now right? I've thought about doing one and I also want to do a 212
Pretty cool. I can sell my truck now :O)
That's cool
47mph isn’t bad, just have to get it dialed in. One thing though is I thought the engine had to be broken in for the 1st 500 miles, not going over 30-35mph. If it’s broken in right it shouldn’t have probs hitting 55mph
Pretty sure the break in doesnt limit RPM for 212cc 4 stroke predators. In fact, I broke in the engine on my gokart by full sending it for a minute straight
😂 10 hours of break in 😢
almost tripple my 66cc but only 10 mph faster?
nxnxns ajxndk hmmm that's because the governor was in
Well yours is a 2 stroke and if he changes his sprocket he can go 60
can you pop a wheelie on yours?
If he simply put a smaller rear sprocket on his bike, he'd cream your 66's ass
Gearing
What could I do to make my 80 80cc faster and what parts should I get
Paige Lewis racing carb with air filter would be a good start
nice
marlon 164 thanks
What's the rubber gloves for Does it vibrate that much ?
When I ride I use the rubber gloves to keep the heat inside and also to block the wind., because it was Winter/ still it The other gloves are for protection just incase if I were to fall lol
Rinegn Productions ah gotcha I'm having a problem with too much vibration on my 2-stroke kit Trying to find ways to reduce lol
try putting rubber on places were the engine mounts like behind the engine and the front mount even the gas tank and chain tensioner so it can stay secure. You can use an old inner tube, just cut it up and make it look non noticeable.
Rinegn Productions I'll give it a try thanks..
good shit man! you should race a moped or go kart hahaha
Victor Vance I tried too but they all were scared 😂💀
Rinegn Productions try the detroit minibike races haha. anyways I gotta get me one of those. too cool but too bad for strict motor laws here in US
Victor Vance what a 212cc and the motor laws to strict for them in the US? Naa not really long as Motorized bikes are legal u can throw any engine on there well i would kmsl
Rinegn Productions thats good man you're an optimist. Ill take your word for it, ride or die hahaha
How did you build a predator motorized bicycle? Thinking about trying to build my own
Traivun21001 it was a kit
Traivun21001 link in description
Traivun21001 you can go up to any engine and fit it to a bike aslong you know what youre doing..the. 212 are easy if you have proper space in the frame to accomodate the engine once you remove the factory gas tank you should fit it in many bikes range not all tho
You need a cnc mount, cnc sprocket, cnc custom hubs, 10 guage spokes and even disc brakes.
How did you get it to go that fast with the governed still in?
Air to Gas Ratio... once you learn where the throttle response is suppose to be then u good
@@RinegnProductions and all, pull full throttle and then barely barely barely pull down throttle
This video made me buy one I reached 59 miles an hour
Was everything stock?
Getting mine tomorrow
Joseph Clossey dammit bro u gone have to upgrade that torque a verter to a Tab 2 because the piece of shit one it comes with will break on u eventually
Joseph Clossey look up torque a verter Tav 2 thats what u gone need for this kit also a heavy duty chain or either a tractor supply chain #41 and then upgrade your throttle to aluminum handles when u get a chance 👍
I like that. I bet it will go that faster though. If you can make a video with the pedal to the metal. Thumbs up man that rocked. I would like to know what extra parts you had to get. I plan on making this build myself.
Yea heck yes ... that bike is slow compared to the Mini bikes ppl be building lol
This dude is gangster
C Hall im a wanster 🙃
Velocidad maxima???
Now did you use a normal bike? Because it looks like it, just couldn’t 100% tell.
Custom made
Was this with the governor in or was it out
Teksavag it was in
how did you mount the motor to the bike?
Khris Shultz the motor came with a bike kit which included a motor mount for the bike
Rinegn Productions fo you have a link?
Is it weird I get a scary rush when the camera is facing straight down while he's doing 45mph+?lol
Donovan Hjersman lol 🤪
Donovan Hjersman gotta cut through that wind bro thats the only way to go 40-50 if your motor can produce the hp
@@RinegnProductions I'm getting a 220cc 6.5 HP minibike with wide tires tomorrow. Any tips you learned with your similar bikes? Optimum tire size that sorta thing. Awesome video BTW a lot of people don't like targeted ads/content, but I wouldn't have seen this video otherwise I don't think. That's one pro I guess😅
Donovan Hjersman yep, true Nd I know most ppl do t like ads ... including myself lol but the revenue do help me out a lil bit also I dont have too many tips because those Mini Bikes Are basically built to last a very long time I know the exact kind your talking about but join the facebook group in the description and post pics of it tomorrow
@@RinegnProductions just got it man its super sweet I'll post a video in the community tomorrow. (Its a purple bike BTW)
What type of brakes are you using ? Do you mind giving me a link ?
Coaster brakes... do u need a link for that?
Rinegn Productions yes please
Rear sproket teeth? great vid!!!!!
The Building Freak 44T sprocket and thank you
Rinegn Productions sweet! thanks for getting back to me so quick!
The Building Freak no problem
what kind of upgrades you got on that ?
Zach Sangraw none but a straight pipe
Please someone help me out is this make manual shift or automatic. if manual can anyone link how to ride these?
Gregory Edwards they automatic
Rinegn Productions nice wow so your setup with the 212cc gets Over 50 is auto? Do you have pedal brakes or handbrakes?
that bike would easily go about 60 with a gear change . about 8 to 10 teeth less on back sprocket and this thing will fly !!! wear leather , road rash becomes cancerous after a while ...
Carl Yandt If he flies off that thing at 60, he’s more than dead. But the bike would probably break before then.
dj asewhole I've ridden bicycles at speeds well over 70mph, Motorcycles in excess of 140 mph, and about 190 mph for the 60 Starliner, wear leather and sometimes a helmet, and I may have had more fun than any 3 men put together. Bless you and your family in accordance with the need in Jesus Holy name, Amen.
@@carlyandt6748 Just saying you might need more than leather to stop your bones from shattering. How scary is a bicycle at 70mph??
dj asewhole Keep in mind that world class racing bicycles are made to handle these speeds and also have super brakes, Also we did not have motors, as I have never owned or even rode a bicycle with a motor. I am older now and thinking of building one though. My experience with bicycles at these speeds is from Alpine descents , and yes I have plenty of road rash and an interesting collection of scars and bone breaks. A 70-80 descent feels like you are flying nearly silently just above the ground all you hear the sound of high pressure tires making an erie whine as they intermittently leave the ground sometimes for several seconds you hear nothing but the wind going over your back if your tuck is very tight (uncomfortable) the air around your face will be strangely calm. I hope this gives you some idea of what it's like, and Bless you and your family in accordance with the need in Jesus Holy and Healing name, Amen
@@djasewhole7734 Get some wider tires for extra stability and it'll be fine... a bicycle at 70mph is probably just as bad as a scooter at 70mph with the right tires. I've had a pocket bike up to 60mph.
Starting to appreciate 4 stroke bikes. No fucking trouble like the 2 strokes.
that tourq thou i had a 212 on my bike fliped it and busted the carb
king close damn how that happen lol?
Shit looks pretty fast! Whats the top speed?
Rinegn Productions Holy shit thats pretty quick imho.
I'm Nicolas and I'm looking for a job yep thanks bro
Nice one guys. I wish my Suzuki FA50 was that fast lmao
Bro you still build them ? I need one very soon
26in wheel i hit 70 go cart jackshaft with a 58t rear..
rarebmx4me damn with a 58t... what secret u do to the motor j/k lol
rarebmx4me and im gone check out ur rc vids when i get chance... just subscribing back to channel right now
is it still considered a bike and street legal?
Khris Shultz no I recently asked a cop and he said since it has a gas motor it has to have insurance
At least in Ontario Canada
That looks like it was filmed in flatrock Michigan
nice build bro .I had one hooked up but had to sell the city I live in made it illegal for it to be on the road . pricks
lol kmsl thats messed up, I'm sorry bro but I don't think I would of sold mines if I live in your city . Unless the same cop would pulled me over more than once
and Are you sure your city made them Illegal or did a police officer tell you, you can't ride them because they didn't know . . . some officers don't know they are street legal.
Rinegn Productions no they made illegal I went to the city board to fight it but lost . if we got them plated and insured it was fine on the road but since the dmv said there is no vin number they would not plate them even though I said I don't need a vin since it is home made they still would not do it ..
www.marcstevens.net Check out the successes page.
Was going to buy this kit researched it found this video. Found out today here in PA we are not allowed to have motorized bikes over 49cc. How stupid. The government is always ruining our fun.
Govenor was moving when. U got up to speed u can throw a zip tie on the linkage to keep the governor from going off n on
Nick ripley I eventually took the governor out ... then the torque a verter plate cracked in half 💀
Rinegn Productions there's a video here on you tube a guy shows that with the governor still on but adjusted the motor can review up to 5200 rpms if u did what he did u could do that but limit the motor to say 4500 rpm and still be on the safe side and hey awesome build by the way keep the dream alive
Nick ripley Will do and I wish I can get a Dyno one day to check the horse power and rpm on engines
Nick ripley a friend of mines just got one a test out The 66cc motor engines some of are as powerful as a 212cc
It's crazy what these little predators will do I'm happy with all of mine e
3:08 got that whiskey throttle
What size rear sprocket u got on there ?
44T
Rinegn Productions switch to a 32 should push u close to 60
My 80cc with a 50 tooth tops out @ 42 mph
Bro @ 6:50 man!! Is this an affordable conversion, how much $ ?
The cheapest is $400, the best kit is like $600 and the dude sells them someone told me he has Corona, so I dont k ow if that's true or not
Damn youre passing cars
yes indeed and its faster I just didn't want to get hit by car that's why I either stay side by side or behind
Whats the front and back sprocket
jordan strickland 44t on rear and 10 or 12 t connected to the belt driven torque a verter m/ transmission
Thanks!
jordan strickland no problem
3:44 is the reason ppl hate us lol
Lol u see i was debating on passing him up right lol? But i didnt wont him to switch lanes on me ☠️
What transmission your using
Desirey & Taylor Channel tav 2 which I dont recommend ... if you want the best of the best transmissions go to ghettobikes.com and order one
@@RinegnProductions thank I'm building a bike 79cc predator for my little girl looking for something with a cover over the clutch
what do you think the top speed is on a 80cc
TheRealBill 40mph
He’s right
Around 35 for mine if it wasn't as broken....might be because I'm heavy.
Are you shifting gears at all?
MRG8091 ha lol No Sir, that is a 212cc 6.5hp Engine (that is used for go carts) on a bicycle with a Brlt Torque A verter making it have so much power ... thats all gas no gears
Rinegn Productions i have a 319cc engine with 8hp i want to put on a bike, how fast would it be and what all do u need to attach it?
Chris Fulton many things gokart mounts jackshaft torque convertor maybe 40 series..proper sprocket for the gear youll be using for engine to tranfers power to the rear wheel.of course a motorize bike gas tank so you can remove bulky tank of the engine and cramp it to the bike.but the mount am talking about will need welding to frame just like jackshaft..if you want to use torque convertor...if not use a gokart mount with build it in jackshaft and weld it on the frame..
Imma just say real quick... its a briggs and stratton 8hp engine form the 80s. Can you tell me how fast it could be and link me to all i need theres mo gear shift.
Chris Fulton. id assume anywhere from 30-50mph if gearings is on point...
Can this go on a mountain bike?
rawkid352 yes, certain kinds it must have a wide space
it can go on anything as long as it has a space to keep an engine
rawkid352 yes
Just mount it over the rear tire.
Where are you dude
Whats with the surgical gloves bro?
What's with ur pic bro:)
@@markvaldez7843 I enjoy cigars
Needs governor removed and larger rear sprocket when running cvt. Mine tops out around 70mph
thanks joe for educatin the wish weres mine too ...with tq converter maxes out at 70 but hey its front wheel ( whell) lol drive :) sleet snow and go for sho trying to hit 90 on it oh btw its belt drive so prob thinking its gotta be the fastest frnt wheel drive on the planet any sponsors ?
havent gotten intto the motor yet but hd valve springs a must its a 6.5 briggs and i figured out a way to run the belt externalally so no tire removal to change it totally trick