Build this guitar stand for under $5 !!!
Вставка
- Опубліковано 6 кві 2019
- Have you ever wanted to build a guitar stand but didn't know how?
That's because you don't know Dick!
Watch this instructional video as Dick explains the process of how to build a collapsible guitar stand for less than $5!
Music by: DJ (Dick) Warkentin
Best DIY Guitar Stand I've ever seen! Thank you.
This is just awesome, so simple, fun and easy to make....directions were well thought out and planed....made two in one
afternoon for gifts thanks so much for sharing. As a note, I used pocket holes to connect the back brace and foot...seems to work well...(I did put wood plugs in to cover the holes made by the jig)
I built one. It cost me about $8:50 Aussie - it's perfect. Thank you Dick.
You’re most certainly welcome David! :)
Great job with the instructions
Many thanks! Very good instruction video!
Totally love it!
This is awesome!!!
Good Video. Well done. Already planning to make a few!
At 9:20 minute mark, when it collapses.the wood isn't touching flat, likely because of the hinge. Maybe a felt in between would give it a together collapsed feel.
Great Video!! Thanks
Great video.
I'll be making one of these for my Martin Road Series. Great video!
Big Thanks, from the UK!
nice done and looks ok for cello
That is so cool! 😎👍🎸
I have seen a similar stand that has one step on the bottom support to hold a thinner solid body electric guitar, and the full width stop holds a thicker full sized acoustic.
PS, nice to meet you. Now I do know Dick! :-)
Great teaching. Will get on this project this weekend.
Let me know how it goes.:)
Megusta mucho la simpleza, de Argentina saludos.
Nice
Hi Dick,
nice work!!
May i ask you the width of the initial piece of wood?
Is the thickness 1 + 1/6" (or 3 cm)?
Thanks and again great job!
Not only don't I know Dick, but I don't have a scrap of 1x6, and compound miter saw or a biscuit joiner... I guess I'm SOL...
Great video Dick. I would love to make a stand like this for under $5 but I don't have a compound mitre saw. Any hints or tricks on how best to do this with a hand saw or jig saw? Also, I would like to make this stand to put my Larrivée acoustic on, but it has proven to be prone to cracking in situations with variable humidity, so I actually hesitate to display it on a stand like this. Would you have any tips in such a situation?
@Clinton Skibitzky
Dont put it on a stand like this ! Use one more suitable to your Larrivée acoustic AS SIMPLE AS THAT!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Nice Guitar-Stand. But, Still, All your tools and What have yous is more than $5.
😎👍🎸
But the tools will cost me 1500 dollars!
Hahaa
Make it wooden with the help of the Woodglut instructions.
$5... First I have to buy all the tools you used :D $5000
@Jetronaattori
IDIOT..............................IDIOT.........!!!!!!
If you are going be like that, then just buy cheap tools, go to a hardware store and buy a cheap handsaw and a $20 drill, you can get the same results.
If I'm gonna buy 4500 € tools, why would I buy $25 tools?