i tried everything, i changed cables, rechecked and cleaned components but for some odd reason, none of this works. it's quarantine time and i can't get out of the house and go to a repair shop. oh god, i am doomed.
I had the same problem and I was about to cry becuase I couldnt even go to a store so I tried to fix it and turns out my RAM placing had a problem on it so i took it out cleaned it and placed it very properly and carefully and boom the monitor started getting signal
Brother, God bless. I just brought my PC back from the repair shop. It's 2 years old and my first build. It had a ram stick issue and that was resolved but still wouldn't connect to the monitor. So I watched your vid. What worked for me was connecting the HDMI to the GPU port instead of the motherboard. Thanks
This video is trash...every time he starts it shows the same time... dumbass just going through removing n cleaning the cable n putting back...clearly he doesn't even know what he's doin'...this video should be 2 mins long only....rest 9 mins r waste of time💯 Dislike n Unsubscribe seriously 👎 👎
Buddy. You have no idea how long I have been trying to fix this damn issue! The very first step worked and I kid you not I cried. 😭 thank you from the bottom of my once broken heart. You are an amazing man.
@@rachitjain9570 i did not understand you want me to say which gpu you need? If so buy GeForce Gtx 1050 ti but used, you can find them for like 80 euro
in some cases its ur cpu cooler fan some times if you dont put the cpu fan correctly (or the cooler corectly) it blocks the flow of electricity one of my friends had this problem so it would be worth to check that out if you have that problem
mine just all the sudden just turned off and it wont turn back on with the no signal message and non of this is working 8( and the monitor is not that old either my pc
DANG! Removing the battery and putting them back after 5 seconds, works fine for me! At first I don't know what to do, but thanks to you it's finally fixed! Thank you so much for the help!
I’m having a problem with connecting my Cyber power PC to my Acer monitor. I bought a new VGA, tested it did not work. Fixed the resolution settings by hard reset, did not work. So I am in the middle of it either being my PC or monitor, however the PC has worked on my bigger TV so I have a feeling it is the monitor.
Thank you very much. Almost all night i was juggling until i made my mind to buy new laptop worth six hundred pounds. As watch your video half way and then gave it a try and just first step did the job. Thanks again. Subscribed you and of course you deserves well thumbs up
I spent so long trying to figure it out, from taking out my ram stick and cmos battery. the solution ended up being step 4, just changing my hdmi cable from motherboard to gpu... thank you you are a lifesaver 🙏🙏
Number 5, worked for me. I have my pc connected to my TV and randomly it wouldn’t receive the signal. Unplugged everything, took of side cover, took out a couple of screws to unplug 3080 GPU, pulled out little battery. Pressed power for 10 seconds. Back together again. Turned on and it loaded some bios setting. Pressed f2 to load original settings, all worked great. Thank you.
LEGEND 🔥 I unplugged everything from the back, took out my ram and gpu and bios battery... and also holding the power button for 5 seconds after. When I put everything back together it booted fine THANKS BRO
@@raymartbolivar689 there is residual power stuck in transition. by holding the power button without a full route it drains the residual allowing a undisturbed route for when you plug it back in.
Thanks man None of them really worked for me except taking my build apart and notice my water cooler was leaking and got a little on one of the ram stick. Was able to fix the seal on my water cooler and wipe up everything and now works
Omfg thank you so damn much I was selling my gpu and then it cut out and the monitor reset worked I nearly cried you’re actually a life saver I love you I’m subbed and liking It’s not a bit comment I genuinely mean it thank you so much
Your steps saved me from buying a new computer. I had no signal on my tv monitor screen. After completing all the steps, I still had no signal, but now had a new problem. Instead of my computer CPU turning on with a blue light, it turned on with a yellow light, and constantly beeping? WTH? I rechecked everything, and still no signal, yellow light and beeping sounds. I was about to quit when I didn't remember hearing the RAM Plates clicking in completely, and they seemed a bit wobbly. I got a flash light and noticed the RAM Plates weren't completely inserted. Removed them, cleaned again with an eraser and inserted them and this time it made a completely different clicking sound, checked with my flashlight and both RAM Plates were completely inserted. Turned on my computer, light blue light, no beeping sound and now tv monitor was up with a, "Reboot by pressing F1." It worked perfectly and all bc I didn't insert the RAM Plates properly. Sir, thank you again for your video, for I have no computer skills in repairs or troubleshooting. This computer was a gift and is ten years old and brought me to 2009? I changed everything and it now runs a lot quieter.💕 I have Subscribed.😁👍🏻
TheRealLava Lamp how would one check since my computer isn’t even 5 months old from when I ordered it online from amazon, I have a ryzen 5 2600 and a rx 580 one 8 gig ram world and a 500 gig ssd
My problem is the screen,mouse and keybord not working and I search for days on how to fix that but a lot of them talk only on the monitor or explain with ways I cannot understand, I follow your steps in other problems I faced and you was super clear, so I will be very very gratefull if you helping me out with this... Thank you for you precious time of reading this
I just built my pc yesterday, all the fans and lights are on, but when i plug the hdmi in my monitor doesn't find a signal. i tried most things on this list
BdxT my motherboard actually has a feature where a small led light will light up if a certain part isn't found or there's an issue with it. Turns out it's the gpu, which is an msi gaming trio x, which put me back 1.3k. it must've came dead on arrival because believe me i was careful with my parts.
Try changing PCI cables and using different display cables. Didn’t work for me though but I’m willing to get my hands dirty and take off my back panel to change some stuff around in my graphics card
Omg you helped me so much I was so worried about having to buy new parts now my PC is up and running because of you and I'm leaving a like and I'm going to sub with post noteys ty so much much love keep doing your thing to help people its a great thing and I love that so much ty once again lol
Bro i am so stressed because my monitor was not working but after i did the 4 step my pc work and now you are god for me bro thanks thi video is very helpful for me thank you broo
Did you take your ram out or upgrade your ram then it happen ? Because I took mine out to give it a look before upgrading , put the old ram back in to run a few test and the desktop was saying no signal but everything’s on ( lights fans etc.)
We need to talk about those gloves
Tell me lies, tell me sweet little lies.
Lmao 😂
lookin like shit from the fucking breakfast club lmao
They just work.
@@judgedredd1399 beast in black song?
i tried everything, i changed cables, rechecked and cleaned components but for some odd reason, none of this works. it's quarantine time and i can't get out of the house and go to a repair shop. oh god, i am doomed.
same shit here.
Same
I had the same problem and I was about to cry becuase I couldnt even go to a store so I tried to fix it and turns out my RAM placing had a problem on it so i took it out cleaned it and placed it very properly and carefully and boom the monitor started getting signal
Same, it’s like I’m on a sinking boat 😭
@@lime2575 yah same...
My monitor lost signal while i was watching ur video
F
@Christopher Emmanuel Hernandez with his hand tho
Probably over heating lol
Lmao
😂😂😂
Brother, God bless. I just brought my PC back from the repair shop. It's 2 years old and my first build. It had a ram stick issue and that was resolved but still wouldn't connect to the monitor. So I watched your vid. What worked for me was connecting the HDMI to the GPU port instead of the motherboard. Thanks
You fixed a problem I've had for a month in the first 1 minute of your video. THANKS!
Hell no
Bruh my prob has 6 month but i vant solve it 😅
Dude wtf its actually works holy
Bro 1st method how to do when the pc is off or all current connection is off pls reply
Thanksssss
I hate how i have to watch it work for him 10 times and it doesn’t work for me
@Indy Fightmaster
Same
You fix?
Marvzs Gabriel nah my gpu is broken
Marvzs Gabriel check if you gpu fans are spinning and if they are not then it’s your gpu
I love how he thought wearing gloves was a good idea
Those are compression gloves.
@Samuel Goldman these are fucking hideous gloves that should be delete from the face of earth :)
@Samuel Goldman 1. they aren't static gloves and 2. even if they were it would need to be grounded to something to work
The fingers aren’t covered 😂
I’m pretty sure those gloves are there because he’s a guy in a wheelchair that’s why they have reflective strip on them.
You used the same footage of you booting up your monitor each time
guys a fucking sped man cant find any real videos without a russian or shitty music
Yeah I thoght that 😂
He prob didn’t want to do it 8 times or didn’t really have issues to begin with
lol
This video is trash...every time he starts it shows the same time... dumbass just going through removing n cleaning the cable n putting back...clearly he doesn't even know what he's doin'...this video should be 2 mins long only....rest 9 mins r waste of time💯
Dislike n Unsubscribe seriously 👎 👎
Buddy. You have no idea how long I have been trying to fix this damn issue! The very first step worked and I kid you not I cried. 😭 thank you from the bottom of my once broken heart. You are an amazing man.
1st worked like a charm. We have the same monitor.
Deadass this is from like 2009. Video quality, editing style, PC wnd monitor, and even the gloves say so
whats so 2009 about the monitor?
@@SouthPokey The stand of the monitor is very 2009. the monitor i had then looked very similar to that
@@laurapills r/woosh
He's running Windows 10-time traveling edition
@@laurapills is there windows 11 NO u dont even have a pc
I'm here looking for a fix and when he removed the 8 pin, I remembered I didn't plug mine hence the no signal issue. good job
I had my HDMI in the wrong port, boi do I feel stupid lol
My problem was that i put the ram back in the wrong way
I read your comment and realised i did the same thing too 😂🤦♂️
I did the same thing haha.
buz marko lmao 😂
Did everything but nothing happened till I did the ram reset with eraser and it fixed mine. Thanks a lot. You saved a lot of effort.
Good what is the reason
Saved me a trip to a PC repair shop, amazing!
Late reply but they probably would have bricked it lol.
DONT GIVE UP. The replugging in RAM worked for me!!!
The moniter didn’t work so I bought a new one and turns out my pc the problem
dxddy dxrwin what did you do then?
I switched over to ps4 because the pc was the problem
Have you reset the cmos?
Now u Got a Dual display
dxddy dxrwin hahahahahahahaha
5:28 worked for me thanks😀😀😀
hey did your cpu started beeping
0:12 damn imagine missing
LMAOOOO
Lol
LMAOOOOOOOOOOOOO
im dead
05:23 still missing..
Thanks bro i cleaned the Ram and inserted now it's working
THANK YOU SO MUCH 1st solution palang ayos na!! Kala ko gpu may problema! Buti nalang nakita ko vid mo! Tyy!!
3:38 worked for me, thank you!
Same
Yeah but then fix your graphics card😁
The you gpu got fucked no need to say thankx.😂
@@Pavic8 it worked for me too buy wht any GPU idk😅can u plz say
@@rachitjain9570 i did not understand you want me to say which gpu you need? If so buy GeForce Gtx 1050 ti but used, you can find them for like 80 euro
Every time he “fixes” the thing it is the same time and same clip smh
Ikr like why the time the same
You are so smart bro
What’s ur point???
If it still works for people then why not?
in some cases its ur cpu cooler fan some times if you dont put the cpu fan correctly (or the cooler corectly) it blocks the flow of electricity one of my friends had this problem so it would be worth to check that out if you have that problem
Thx
The first one *hold 5 seconds* saved my life, thank you so much!
Same i thought my computer was broken lol
Thank u very much..very helpful
#4 helped me wth.. Didnt even know GPU had HDMI ports. Thanks a lot!
All gpus use hdmi these days
Appreciate the video, but wouldn't the 4th option make the GPU pointless?
Yeah lmao then you would be switching over to onboard apu or igpu graphics
He trying to fix/diagnose the problem lol
I solved the problem with step #5. Awsome! On a Sunday with no shops to help me your video dit it! Thanks.
Amazing , you're Albert Einstein, I followed all steps you mentioned and it worked in step #5, now you have a New suscriber, thank a lot.
I tried all the method, i guess my psu is gone, i don't have an extra one so i will try it btw nice tut
Thank you so much, taking out the hdmi and holding down on the power for 5 seconds fixed it. I am so grateful 👍👍
You plugged it back in and it worked ?
Power of the monitor or the PC?
@@toseeupload8855 idk man but it really helped
@@spectreshorts658 lmao. Is this video troll?
@Doki Oke that's hold down for 8 sec. And that's shut down
mine just all the sudden just turned off and it wont turn back on with the no signal message and non of this is working 8( and the monitor is not that old either my pc
Hi I am having the same problem, have you find a solution?
lpn1V Nothing in this video worked but I tried switching the cable to hdmi 2 and then back to 1 and it worked but sometimes it can happen again
@@yozoragg5702 Ok, thanks for advice!
try to reset the motherboard it will work 100%
Might be your power supply
DANG! Removing the battery and putting them back after 5 seconds, works fine for me! At first I don't know what to do, but thanks to you it's finally fixed! Thank you so much for the help!
Thank you very much, the shaking one help me. Best wishes goes towards you.
if this doesnt work, simply just change the electricity socket or extension you plug your monitor and pc into and it might work
worked for me
Thank you!!! The first one helped. Everyone kept telling me to buy a all types of different cables. I knew I shouldn't need to.
I’m having a problem with connecting my Cyber power PC to my Acer monitor. I bought a new VGA, tested it did not work. Fixed the resolution settings by hard reset, did not work. So I am in the middle of it either being my PC or monitor, however the PC has worked on my bigger TV so I have a feeling it is the monitor.
Thank you very much. Almost all night i was juggling until i made my mind to buy new laptop worth six hundred pounds. As watch your video half way and then gave it a try and just first step did the job. Thanks again. Subscribed you and of course you deserves well thumbs up
From gpu to motherboard worked for me. Thank you so much. Back to gaming
I spent so long trying to figure it out, from taking out my ram stick and cmos battery. the solution ended up being step 4, just changing my hdmi cable from motherboard to gpu... thank you you are a lifesaver 🙏🙏
Same here. Thank you very much to the owner of this video.
I told myself if this video fixes my problem, I’ll sub... it worked lol. Subbed like I said 👌🏻
Which method you use 🙄
When I start my PC it running but when I play game or any software it shows no display please help😭😭😭😭
Okay I had all 8 pins plugged in and now I just have 4 and it works. Thank you!
THIS METHOD WORKED FOR ME!!!!! Thanks a lot man…...!!!
Ayyyy thanks man very helpful vid💯
Thanks broo number 1 step make my PC turn on again👍
Step #4 - moving monitor cable from GPU to motherboard (or the other way) worked for me !! Thank you very much ♥ I was so worried :')
Not for me😔 my mom is gonna kill me
Omg thankyou so much
You just saved my pc!!
And myself!!
OMG THANK YOU SO SO MUCH I COULDN'T FIND A SOLUTION ANYWHERE!!!!!! STEP 1 WORKED THANK YOUUUU
Mine still doesn’t work
Number 5, worked for me. I have my pc connected to my TV and randomly it wouldn’t receive the signal. Unplugged everything, took of side cover, took out a couple of screws to unplug 3080 GPU, pulled out little battery. Pressed power for 10 seconds. Back together again. Turned on and it loaded some bios setting. Pressed f2 to load original settings, all worked great. Thank you.
Number 4 helped a lot thanks so much bro 2022 who’s here? Thanks again bro 🙏🏾🙏🏾🙏🏾
3:38 helped me, thank you
Dude that’s not a fix it just means ur gpu is broken or has dust
@@cuka1337 Same it worked for me I don't know what's the prob. Maybe dust
@@lalithesh6942 did you clean it?
@@christianccarag3007 No
@@christianccarag3007 Just switched the plug from Gpu to motherboard
LEGEND 🔥 I unplugged everything from the back, took out my ram and gpu and bios battery... and also holding the power button for 5 seconds after. When I put everything back together it booted fine THANKS BRO
This worked for me 2
ahahaah same the question is how is that even possible when everything is unplugged and hold the monitor power button and that’s all
@@raymartbolivar689 he said "i put everything back together"
Raymart bolivar I know right 😂
@@raymartbolivar689 there is residual power stuck in transition. by holding the power button without a full route it drains the residual allowing a undisturbed route for when you plug it back in.
the first solution worked, oh my goodness i love my life, Shouts out to bruh and his 43 seconds of service, gg's bro
Man, thank you! I'm crying while typing this! First step has worked!
Thanks! I just had to clean my hdmi cable and it works
Sometimes you just have to unplug and blow on it so the dust comes off
Thanks man
None of them really worked for me except taking my build apart and notice my water cooler was leaking and got a little on one of the ram stick.
Was able to fix the seal on my water cooler and wipe up everything and now works
You’re lucky that’s all that it got on.
those CS:GO Gloves XD
🤣🤣🤣
Lol so true
Maybe he is Razorfist's brother.
Omfg thank you so damn much I was selling my gpu and then it cut out and the monitor reset worked I nearly cried you’re actually a life saver I love you I’m subbed and liking It’s not a bit comment I genuinely mean it thank you so much
Lucky
My problem is while gaming my monitor will turn black. Is it my gpu doing that?
First trick worked best video that made my day. Keep it up mate 🙏
The first solution already helped me out tysm
phizz i got this lucky. Glad I watched a
video after restarting my computer 5+ times
I don't know if it was coincidence. But just after seeing ur video i onned the computer and it became proper.....
Same
I had this issue. First solution : Fixed
Thank you I love you
Your steps saved me from buying a new computer. I had no signal on my tv monitor screen. After completing all the steps, I still had no signal, but now had a new problem. Instead of my computer CPU turning on with a blue light, it turned on with a yellow light, and constantly beeping? WTH?
I rechecked everything, and still no signal, yellow light and beeping sounds. I was about to quit when I didn't remember hearing the RAM Plates clicking in completely, and they seemed a bit wobbly. I got a flash light and noticed the RAM Plates weren't completely inserted. Removed them, cleaned again with an eraser and inserted them and this time it made a completely different clicking sound, checked with my flashlight and both RAM Plates were completely inserted. Turned on my computer, light blue light, no beeping sound and now tv monitor was up with a, "Reboot by pressing F1."
It worked perfectly and all bc I didn't insert the RAM Plates properly.
Sir, thank you again for your video, for I have no computer skills in repairs or troubleshooting.
This computer was a gift and is ten years old and brought me to 2009?
I changed everything and it now runs a lot quieter.💕
I have Subscribed.😁👍🏻
The first step solves my problem
Thank you so much💚
i dont get signal until windows boot up ( cant get in the bios setting) any idea how to fix it?
Tip 4 fixed my problem
i have 2 monitors noe before i had only 1 didnt have issues it startes Working fine then my both monitors froze and i had to restart my pc, help?
Skillz same. Got my 2nd monitor and no signal happening
thank you so muchhh!!!! today is our 3rd grading summative test
I was losing my patience and I did all of the methods that were in the video. My computer stars now. Thank you!
My pc would have this problem some of the time. Rest of the time it is okay. What could be the problem?
same here,not always no signal!
Same I use a sky tech computer
Does anyone have a solution????
You CPU maybe starting to go bad.
TheRealLava Lamp how would one check since my computer isn’t even 5 months old from when I ordered it online from amazon, I have a ryzen 5 2600 and a rx 580 one 8 gig ram world and a 500 gig ssd
Thank you, #4 was the problem for me.
Without your Tutorial video my PC were only stock, god bless more bless,
Thank you so much dude your da pc doctor
Well I fixed mine just by shaking my GPU very lightly. Anyway, appreciate your effort man!
OMG THANK YOU LIFE SAVER I WAS SO NERVOUS TO EXPLAIN TO MY PARENTS AND THIS WORKED TYYYY
really?
@@koronavirusianiluka861 yeah i unplugged then shaked it for a few secs then bam it worked for me
7:22
I was playing around with my pc 😅
After reassembly I realised that I haven't connected 12v cpu cable 😂😂
Who said I have integrated graphics
me
@@ethboom. understandable have a great day
@@Miaaa_ no
This saved me from buying a new computer, thank you so much ❤
My problem is the screen,mouse and keybord not working and I search for days on how to fix that but a lot of them talk only on the monitor or explain with ways I cannot understand, I follow your steps in other problems I faced and you was super clear, so I will be very very gratefull if you helping me out with this... Thank you for you precious time of reading this
I restarted my pc like 60times then i watched 30secs of this video then my pc begin working again
K
liar
OOF
Step 4 was the winner for me, thank you. :)
Number 8 helped me thank you SO MUCH!!!!
So cleaning the ran work but it bring me to some wierd window reset thing help?
The first step worked you're a star ❤️🔥
I just built my pc yesterday, all the fans and lights are on, but when i plug the hdmi in my monitor doesn't find a signal. i tried most things on this list
Promind same issue and it looks we are in the same time as well with when we built. What are your specs? Let’s try to help each other out here
BdxT my motherboard actually has a feature where a small led light will light up if a certain part isn't found or there's an issue with it. Turns out it's the gpu, which is an msi gaming trio x, which put me back 1.3k. it must've came dead on arrival because believe me i was careful with my parts.
BdxT even if your motherboard doesn't have that feature i can almost guarantee it's your gpu
Promind my motherboard does and it lights up white I’m pretty sure we both have a asus board, I have a 2070 super founder edition card
Try changing PCI cables and using different display cables. Didn’t work for me though but I’m willing to get my hands dirty and take off my back panel to change some stuff around in my graphics card
No way, method 1 actually worked, I thought my pc was done for! Thanks you!
In video whenever the monitor get started
:Automatically my hand -👍
maraming salamat sayo sir..talagang nakatulong sa akin..kahapon pa ako nag hahanap nang video na makatulong sa akin
..thumbs up sir
I had this one for a long time then I tried to press the power button one time then press and hold for 5 sec and it worked
The first step was the key! Thank you!
Me too
Omg you helped me so much I was so worried about having to buy new parts now my PC is up and running because of you and I'm leaving a like and I'm going to sub with post noteys ty so much much love keep doing your thing to help people its a great thing and I love that so much ty once again lol
Which one worked?
1:27 worked 🙌🔥🔥
Bro i am so stressed because my monitor was not working but after i did the 4 step my pc work and now you are god for me bro thanks thi video is very helpful for me thank you broo
Thank you so much I've been struggling how to fix this hehe,I thought that my mom's PC was gonna broke but I saw your vid💕💕
Thanks a lot man !! 5th step worked like magic , appreciate it a lot !!
THANK YOU!!!!!!
YOU MADE MY DAY BRO!! A SUB FROM ME.
In my case DP was connected to Motherboard I then connected it to GPU and it worked
This was my issue too
Sry what is DP?
@@deandoss2105 Display port cable.
@@supernoviac8197 okay thanks for answering! 👍
Thanks, everywhere else said that is was a graphics card issue but it seems to be a ram one for me
IM HAPPY FOR YOU
It was Ram for me as well.
Did you take your ram out or upgrade your ram then it happen ? Because I took mine out to give it a look before upgrading , put the old ram back in to run a few test and the desktop was saying no signal but everything’s on ( lights fans etc.)
Thanks your a life saver, all the other guides I watched just wasted my time
Ok honestly i didnt think the battery thing would work but it did, thank you!
For everyone, check the cables first. I was moving my pc and forgot the cables go into my gpu not my motherboard
BRUH THANK YOU