Don’t use twist connectors for automotive. There is too much vibration/jostling in a vehicle. The correct terminal would be an insulated butt connector (automotive specified).
Glad to see you back. Heart break leaving it in gear, I've done that before... I'm glad to see it moving under its own power, that's a huge step. Keep grinding bro 😎 Greatly appreciate the fiberglass how to👍🏾
Good to see you back. I was kinda worried you were going to quit. Keep it up, and maybe when I'm finished with my RCSB project, I'll see you at the track!!
As a life long mg fan and a 20yrs owner of the same mgbgt i fully approve of your build it makes my day just to see it cant wait for a full drive video 😎👍👌
It has been my experience, that if you let the fiberglass resin drip down onto the fibers, you can spread it a whole lot easier. As you notice, whenever you do it with the brush like that, the fiberglass fibers tries to stick to the brush. Also, you're going to regret not raising up that fuel cell as well.
That MG will be seriously cool when it’s done. Looking at how low that front end sits do you think it’s worth maybe getting airbags? They do kits that fit to coilovers.
I truly don't understand why you decided to put a ford engine in that beautiful car! You could have put a 283 with a big cam in it, and it would have been SOOOO much BETTER! Might be a good idea to put that seat on slide rails. SHAVE THAT FRAME UUUP (AND the sides of your face!)
Can't wait to see this thing at GRIP AUTOCROSS maybe you'll have a passenger seat for a ride along 😉 😂 hopefully my Z can roll in the last event this yr if not better luck next yr I guess...I'm happy for you though congrats on getting this far most ppl would've quit! You got heart bro and these videos prove it! Keep up the hard work it's paying off!!!
Well now you can do verson 2 of the front bumper and work on getting the fitment just a little better. Is the frame on the car tweaked some? When you had the hood open before the crash the Rad support looked twisted where it was cut.
You should be proud dude. By the way I did the same thing just finished paint on my car and started it to hear the exhaust and it was in 1st it drove through the shed and smashed out a wall.
Great to see you back at it on here! Thanks for the fiberglass tips. It's been my experience when I'm hurrying, that's when mishaps happen. Just slow down a little bit, even though the work you do must be exciting. I'd suggest keeping a small fire extinguisher inside the vehicle, great to have there if needed. The car looks very cool indeed!
seeing you so happy during this video makes me happy. Well done on this absolute weapon. I’ve lurked in the background on your videos for so long, just letting you know I appreciate your vids. Much love man
That little car looks so good it brings a tear to my eye & a smile to my face! You said how the sub-frame is going to cause issues, don't worry, that's a 'future Kalleb' problem!
This thing is shweet! I saw a rendering of a 928 with a gt2 wing and I want to build one! GT2 wing looks great on this too! Good job, keep going, ay ay ay
Really glad to see you back and hope you and family are doing well. Don't give up my man
"Nothing is catching on fire, so we're just gonna roll with it!" LOL! Been waiting for this video!!!
Don’t use twist connectors for automotive. There is too much vibration/jostling in a vehicle. The correct terminal would be an insulated butt connector (automotive specified).
Any word on doing the Fatsun?
Glad to see you back. Heart break leaving it in gear, I've done that before...
I'm glad to see it moving under its own power, that's a huge step.
Keep grinding bro 😎
Greatly appreciate the fiberglass how to👍🏾
I’m building my own crewcab out of 61-66 f100’s. Check it out
Ready go
Glad to see you back! Been here since the MR2 widebody, glad you keep on making cool cars!
Work? It can wait. BUILT POSTED A VIDEO!!
Good to see you back. I was kinda worried you were going to quit. Keep it up, and maybe when I'm finished with my RCSB project, I'll see you at the track!!
I wondered if you quit making videos
As a life long mg fan and a 20yrs owner of the same mgbgt i fully approve of your build it makes my day just to see it cant wait for a full drive video 😎👍👌
It has been my experience, that if you let the fiberglass resin drip down onto the fibers, you can spread it a whole lot easier. As you notice, whenever you do it with the brush like that, the fiberglass fibers tries to stick to the brush.
Also, you're going to regret not raising up that fuel cell as well.
Carefull with the water on the HEI…put a bag when you clean the car.
I have 2k+ hours in RL, haven't played for awhile though, didn't realize they added a Porsche car
That new build better be a ferrari 458 powered by a mgb inline 4 haha... missing a diffuser 😅
I haven't clicked a video faster in my life! Welcome back!!!
Love seeing your channel back on my feed!
That car is so bad ass. The color and what you’ve done is just amazing. Keep it up bro.
Sweet
That MG will be seriously cool when it’s done. Looking at how low that front end sits do you think it’s worth maybe getting airbags? They do kits that fit to coilovers.
Glad you're back. 👍🏽🤙🏽🤘🏼
I truly don't understand why you decided to put a ford engine in that beautiful car! You could have put a 283 with a big cam in it, and it would have been SOOOO much BETTER! Might be a good idea to put that seat on slide rails.
SHAVE THAT FRAME UUUP (AND the sides of your face!)
DUDE THE "RACE ME" I WROTE WAS STILL THERE?! SIIIIIIIIICCCCKKKKKK
So happy to see you back!!! I was hoping.
Glad your back man!
Notification gang!
Happy to see you building on youtube again. Hope you reach your goals in 2024. God bless, keep calm and soldier on.
Let's facking gooooooooooooooooo!!
would love to see a collab done with Stanceworks to make your wild lil ride a bit more... "put together", i guess.
you two seem like you'd get along!
I love that your 911 is in the office 🙂
Can't wait to see this thing at GRIP AUTOCROSS maybe you'll have a passenger seat for a ride along 😉 😂 hopefully my Z can roll in the last event this yr if not better luck next yr I guess...I'm happy for you though congrats on getting this far most ppl would've quit! You got heart bro and these videos prove it! Keep up the hard work it's paying off!!!
Glad to you back ✌✌🇬🇧
Definitely get that to the autocross, I bet it will be a GRIPing performance.
Killer build!
Noticed your rocket league Porsche right away, took me half the video to notice your actual just behind you
First!
Well now you can do verson 2 of the front bumper and work on getting the fitment just a little better. Is the frame on the car tweaked some? When you had the hood open before the crash the Rad support looked twisted where it was cut.
It’s so cool to have you back and doing these projects again! Congrats!
You should be proud dude. By the way I did the same thing just finished paint on my car and started it to hear the exhaust and it was in 1st it drove through the shed and smashed out a wall.
This thing is monster! Good work bro
Glad you're back, always enjoy your videos!
So glad your back to posting! Where is the autocross located?
I just got done with the fatsun playlist. Where it be?!?!
Great to see you back at it on here! Thanks for the fiberglass tips. It's been my experience when I'm hurrying, that's when mishaps happen. Just slow down a little bit, even though the work you do must be exciting. I'd suggest keeping a small fire extinguisher inside the vehicle, great to have there if needed. The car looks very cool indeed!
seeing you so happy during this video makes me happy. Well done on this absolute weapon. I’ve lurked in the background on your videos for so long, just letting you know I appreciate your vids. Much love man
So excited to see you posting again! Your channel is a big reason I decided to go back to school for auto body
glad to see this thing finally going on again
Totally happy that you are back to making vids!!!
Can we get an update on the fatsun?
Looking forward to seeing it on the track
Wait a min you said to pull the gearbox to bleed the clutch lol wtf?
Keep your head up. It's an MG curse...lol😅
Nothing is catching on fire yet, so we are going to roll with it. 😂😂😂😂😂
Car is straight fire🔥
What's the new car kaleb?.... glad to the the mg back
So happy to see the MGB back! This car makes me smile!
That little car looks so good it brings a tear to my eye & a smile to my face!
You said how the sub-frame is going to cause issues, don't worry, that's a 'future Kalleb' problem!
Front looks about 1” to low but the car is absolutely beautiful
Keep up with your good work, thanks for one more video
So happy to see your videos hit my notifications
Dude, I loved this car. Glad to see you working on it again!
Welcome back my guy! Hope all is well 😊
I've been watching this series for years and it's so satisfying to see this progress. I'm so happy for you to get to this point!
Can’t wait for the next upload
Nice too see you working again on that car
GLAD TO SEE YOU AGAIN, BROTHER!
Man, that car is looking great.
what happened to the datsun 620 ute
I'm still having a hard time with how you junked that thing up with a turd engine... I mean ford engine. A 283 would have been so much better.
Keep em coming my guy!
So happy to see you back 🎉
Phanteks ? My man.
Quick release needed
This thing is shweet! I saw a rendering of a 928 with a gt2 wing and I want to build one! GT2 wing looks great on this too! Good job, keep going, ay ay ay
glad to see u back
Brother love ur back. I started watching this channel because of the Datsun. When. When is that happening???
So Stoked!
Please don’t use wire nuts for house wiring on a car. Get some proper automotive wiring connectors.
The house wire nuts are killing me.
Please switch over to actual automotive electrical connectors use relays and fuses lol
How is it that you have millions of views, your monetized but you dont even have a lift. What do you do with the money.
Love that you’re back!!
Autocross huh, wasn't expecting that
Some reason all I hear is I might kill my ex song lol
28:13 it that the 911 with the Testarrosa strakes?
That she'd cant cost more then 1k per month.
When are going to finish fatsun
what a waste of good parts
Man, what a sh!tbox that is 😂
those wheels :)
Like 741 !
'PromoSM'
Wire Nutz 😂😂😂😂😂...