JUMPER T-lite navigation made easy!!! No switches after binding? here’s why!
Вставка
- Опубліковано 10 гру 2024
- Excuse the black tape is to block the green light
Just a quick run through to get a guy up and at er like now!!
If it works for you pls subscribe comment or leave a like 🙏
Start-1:57 ⚠️only navigation don’t copy!!⚠️
1:57-2:34 ur modes for binding ⚠️only how to access options⚠️
2:34-finish. ✅This is why u don’t have switches in beta flight!
This is not a how to bind video!!!
This video only pertains to how to NAVIGATE UR T-Lite and why you don’t have switches after BINDING!!
If ur looking for binding video this is not it!!
Sorry for any confusion!!
Just curious how many models can it remember?
Exactly of top of my head I couldn’t tell ya but more than you would need at one time. I’m def not a specs guy I have ten on mine at current
@@lockingpaul thank you very much!
The best video to break it down I could find! 🙏 Thank God for your video, brother! Much appreciation and gratitude 🙏
Couldn't figure out how to get to any menus, first thing I see you do is long press the mdl button instead of short pressing it like I was doing. One loud facepalm later I'm navigating like a champ. Thanx man!
A note for anyone finding this. Ignore the Trainer section, and configure the Internal RF, not the External RF.
CrashN Burn
Exactly as listed in description is only for navigation purposes!!!! Only useable part is the switches
Short sweet to the point. This helped get it. I missed then next page mixes section
Glad it helped!
Thanks for the video. I just wonder how long before the push button gives way. Surely there must be a better to program the TX ,using a PC and an interface board or some sort!
Thnx dude, that helped me a lot with switches.
Gracias 🙏 😅
Now you should do a Betaflight for dummies, how not to fk it up lol, nice vid!!
Can you show me.how to bind too express lrs external module connected to droneodule on back of jper cheer I sort of get it got two models only one using so make that my Roma L5 change name switches .good with plus bins so can arm etc need rth switch setting up how I do that subbed you brother
I thought it would be like my 9xr pro but a little different
not relevent, the battery is fully charged but it showes 3.5v on display?!
Ur talking about ur controller?! Not sure what u mean? 3.7v is right around where it should read is a 18650 bat? if ur battery is full and reading lower could be lame bat
@@lockingpaul my 18650 battery when tested by multimeter showes around 4.5v fully charged but on TX disply it showes 3.5v then start beebing shortly
If you have really HAVE charged an 18650 LiOn battery to 4.5v then I am NOT SURPRISED that it has gone bad pretty quickly! NEVER charge to more than 4.2v and better to keep it to 4.1v max! @@zico3239
any video links for how to use for an airplane like Expo, Endpoints etc..?
I’m pretty sure Andrew Newton has vids on fixed wing. Type t-lite and airplanes or fixed wing.