Very nice! I was concerned about the back not looking finished with all the wires and the tape. I was getting anxious 😂. Suddenly vinyl appeared for the ultimate finish. Love it!
Very nice man well done... just an advice... if you have CNC you can route a line of 40mm on back of your piece to make the connections, then you can cover up with a piece of 3mm pvc so the bottom turn clear without the wires making volume ;) ...oh use heat shrink tube for the connections instead of papper tape eheheh
pretty cool, id almost make a template to cut a channel in the back with a template guide spiral upcut on the back and put a piece of acm or a backer. ----000----- channel with a depression to hide the wires. love this, gonna have to try it out.
i cut groove like he does, then at the ends of each letter i cut a hole all the way through and connect all my wiring the same way he does. if it is an opaque acrylic then it doesn't have to be pretty on the back. if it is clear acrylic then it has to been cleaner looking tracing each led strip with the wiring glued right behind it. I cover the back with a vinyl wrap to cover the wiring on the back. I have also done as you mentioned. routed out a very light channel in the back behind each letter to match the same channel as the front.
Hi I would like to know how you set the brush stroke thickness of each letter in font to the thickness of the Neon flex light to say 6/8mm for example in Illustrator Also the same method should be doable in a co2 laser right ?
You can't laser PVC (or Sintra) But yes... you can use acrylic and do basically the same thing. The stroke thickness is 14pts that snugly fits the 6x12 mini-flex neon.
The light is Neon flex .. we need to cut at a specified length which is every 1 inch in his strip. According to the length of letters and cut we need to design the letters in the software .
@@edhermartinez9932 yes we have to design every letter. eg.for letter T: The horizontal portion will 2 inch and the vertical portion will be 3inch . So on basis of that we have to design and cut the strip. The neon strip which he is using has cut on every inch so according to the size which we require we can make a cut or make design in the cad software .
There's a black dot where you cut it that's where the connectors are There's a negative and a positive Cut the silicone on both ends of this connection can also buy clips that can join the pieces drill a small hole close to the Letter then run the wires behind it and then backup on the other side to conjoin your next piece.
Can you please explain why you are able to have a successful project when you cut the strip just any length as needed for your design.. while accordingly, the right spot to cut led neon strip is right on the cut mark in order not to have a failed connections..?
Het cuts the neon strip on the marked length (every inch) and if you look carefully you see him trim the silicone to the exact design length, but not the led strip itself. He fold it inwards and tuks it into the silicone.
so nice i wish i was not poor but rich enough to do thing like like this i hat not having money even with my job before not enough to do thing like this
You can use adobe illustrator , insert the image and transform it to the size you’ll like. Then you draw on top of the letters and afterwards click on document info in the view tab , this tool will help you measure the length of the drawing you made on top of the letter . Adjust making bigger or smaller words for them to measure 2.5 cm multiples and you are ready to go.
@@armandogalvan1525 Actually, this isn't the whole truth: It would be impossible to find a font such that all letter segments are a multiple of 25mm. The trick is shown in the video, if you look very carefully at 11:38-11:52 (use slow speed): If he needs a segment whose lenght is not a multiple of 25mm, he cuts on the next 25mm boundary and then he "strips" the tube and folds the extra length back, inserting it in the plastic sleeve!!! He is very good at it and thus can adjust the length to about every 6mm, which is enough to make the strips fit anywhere!!!
Why did you not make holes for the cabels to go in the back it was space for them tha use a conector plug in the back ore side for hanging in the wall. wood look much better flush. but cool anyway,
OK The sign is cool - and for "quick an dirty" ok. But the electrics....... u can do this better :-) . A suggestion: why arent u making "ways" for the cabels on backside and a thin plate to hide the electric? So at the end it looks better and more professional :-) -- only a suggestion Like i said nice work Thx
@@PreciseSigns some people are using transparant plexiglass so I thought this was also plexiglass. What's name of cutting machine. It looks 3d printer machines Thanks for the answer
Hey my brother I need you to do one for my wife please she loves this stuff her name it’s “ CAROLINA “ please I will pay you I don’t mind just need one done by 2 weeks please
Very nice! I was concerned about the back not looking finished with all the wires and the tape. I was getting anxious 😂. Suddenly vinyl appeared for the ultimate finish. Love it!
AWESOME!!!! I truly needed this to help me with three signs that I'm making, thank you so much!!
Good work... i like it
AWESOME!!!!
Very nice man well done... just an advice... if you have CNC you can route a line of 40mm on back of your piece to make the connections, then you can cover up with a piece of 3mm pvc so the bottom turn clear without the wires making volume ;) ...oh use heat shrink tube for the connections instead of papper tape eheheh
Hey man sorry i just saw the Love sign video and i saw you route the cable way so my comment is worthless eheheh
have you experimented with engraving solid 30mm acrylic and painting the edges as an alternative to led flex tube?
Woahhhh I love your videos. Can you make a spoken tutorial of these??? Please?😍😍
Can i cut & connect neon LED lights at any length? Not limited to specific spots for cuts?
pretty cool, id almost make a template to cut a channel in the back with a template guide spiral upcut on the back and put a piece of acm or a backer. ----000----- channel with a depression to hide the wires. love this, gonna have to try it out.
i cut groove like he does, then at the ends of each letter i cut a hole all the way through and connect all my wiring the same way he does. if it is an opaque acrylic then it doesn't have to be pretty on the back. if it is clear acrylic then it has to been cleaner looking tracing each led strip with the wiring glued right behind it. I cover the back with a vinyl wrap to cover the wiring on the back. I have also done as you mentioned. routed out a very light channel in the back behind each letter to match the same channel as the front.
what size of the whole for the neon led to put?
good lighting
Which soldering iron compatible for led strip soldering i mean how many watts
Hi I would like to know how you set the brush stroke thickness of each letter in font to the thickness of the Neon flex light to say 6/8mm for example in Illustrator
Also the same method should be doable in a co2 laser right ?
You can't laser PVC (or Sintra) But yes... you can use acrylic and do basically the same thing. The stroke thickness is 14pts that snugly fits the 6x12 mini-flex neon.
thank´s for your video. It will help out, on two signs that I´m making
No prob....Glad i could help
What model machine you use
muito bom !!!
hebat dan luar biasa.. terimakasih. sangat bermanfaat
What size acrylic boards do you prefer using ?
this is PVC not acrylic
@@PreciseSigns Nice video. How thick is this pvc panel? thank
which LED strips are you using , could you kindly share the Amazon Link for them ?
Can I ask what led neon you are using? Also do you have to cut it at a specified length or can you cut it where ever you desire?
The light is Neon flex .. we need to cut at a specified length which is every 1 inch in his strip. According to the length of letters and cut we need to design the letters in the software .
@@navedmeer98 and how every letter fits perfectly to the size of the neon? You have to design every letter to fit on 1,2,3... inches?
@@edhermartinez9932 yes we have to design every letter. eg.for letter T: The horizontal portion will 2 inch and the vertical portion will be 3inch . So on basis of that we have to design and cut the strip. The neon strip which he is using has cut on every inch so according to the size which we require we can make a cut or make design in the cad software .
Thanks for answer!
There's a black dot where you cut it that's where the connectors are There's a negative and a positive Cut the silicone on both ends of this connection can also buy clips that can join the pieces drill a small hole close to the Letter then run the wires behind it and then backup on the other side to conjoin your next piece.
What kind of material for the base you use?
I think it's PVC
Bro,im just asking what the brand or name of the router cutting machine??&also the name of the black rubber???thanks a lot🙏🙌
CNC Router.
Hello please wiche connector wire do you use
Hello there. in which program do you make the drawings?
I use adobe illustrator
Can you please explain why you are able to have a successful project when you cut the strip just any length as needed for your design.. while accordingly, the right spot to cut led neon strip is right on the cut mark in order not to have a failed connections..?
Het cuts the neon strip on the marked length (every inch) and if you look carefully you see him trim the silicone to the exact design length, but not the led strip itself. He fold it inwards and tuks it into the silicone.
What kind of machine u r using for routing?
It was built and designed by myself
Onde encontro esse led
What are the products used in your business, where do you buy them, what are the drilling machines used, and where do you buy them
Tht is his business ...he cant share all tht.
@@Super_Natural_Power LOL, You said exactly what I thought. Dude trying to make money, not give it away. LOL
what kind of glue do you use?
Dont use glue.....tight fit
what laser do you use?
so nice i wish i was not poor but rich enough to do thing like like this i hat not having money even with my job before not enough to do thing like this
led ışık yerine, rcb döşeyip kazılan yere akrilik dökümü yapılırmı
how you manage to calculate the exact length for cutting to be at same spot where the word ends.
+1
X2
It's same question by me.
You can use adobe illustrator , insert the image and transform it to the size you’ll like. Then you draw on top of the letters and afterwards click on document info in the view tab , this tool will help you measure the length of the drawing you made on top of the letter . Adjust making bigger or smaller words for them to measure 2.5 cm multiples and you are ready to go.
@@armandogalvan1525 Actually, this isn't the whole truth: It would be impossible to find a font such that all letter segments are a multiple
of 25mm. The trick is shown in the video, if you look very carefully at 11:38-11:52 (use slow speed): If he needs a segment whose lenght
is not a multiple of 25mm, he cuts on the next 25mm boundary and then he "strips" the tube and folds the extra length back, inserting it
in the plastic sleeve!!! He is very good at it and thus can adjust the length to about every 6mm, which is enough to make the strips fit
anywhere!!!
las pegas antes de dejarlas puestas y si es asi que pegamento usas
Why did you not make holes for the cabels to go in the back it was space for them tha use a conector plug in the back ore side for hanging in the wall. wood look much better flush. but cool anyway,
Have you buy that led sign on neon factory website?
NO......I made it myself
@@PreciseSigns Did you buy the LED on the neon factory website?
What is this black material?
what is black material ?
pvc foamed, also called sintra or trovicel
What it is? The black material for the sign?
Its called PVC
What is the color name ??
Самая аккуратная работа, что я видела
Which machine is cutting this sheet ?
CNC ROUTER
What for that long nail on your pinky finger?
How to the Rate of per square feet on this. Neon led sign board
Dont understand what you are asking
hahahhah
What kind led neon did you use? Amazing job!
Thanks bro.....I use LED Neons
@@PreciseSigns Bro, where can I buy this led?
@@melquitavares whats your email address
Precise Signs Melqui.atavares@gmail.com
@@PreciseSigns could i also get that link mleaman5@gmail.com
What’s the machine called
What kind of material you used and bit size if you don’t mind sharing. Thank you! And love the video!
You only solder 1 side? how about the other side? how your circuit works? 🤔
Hi, what program do you use to generate g code files for cnc cutting?
vcarve
Bhai ye light kaha milegi
It’s pvc?
yes
Good job, 👍👍
Thank you
nice work
hello, beautiful work bro, what material is the base?
???
its called foamed PVC
How thick is the wire ?
What wire are you referring to?
@@PreciseSigns Thats the question :) i think for 5v 0,08mm2 is okay
0,04mm2 too
I have 0,01 mA in the hole circuit
Great work 😍,can you tell me what's name of machine?
cnc router
Me gusta tu trabajo me podrías decir dónde consigo la máquina que utiliza s
Agar sir apna buesniss karna ho to order kha se milte hh
Please tell me the cutting machine name and price ?¿
What font?
Probably 'comfortaa'
OK The sign is cool - and for "quick an dirty" ok. But the electrics....... u can do this better :-) . A suggestion: why arent u making "ways" for the cabels on backside and a thin plate to hide the electric?
So at the end it looks better and more professional :-) -- only a suggestion Like i said nice work Thx
bang, buka jasa pembuatan seperti ini gak ?
Black one.? Acp board?
black pvc board
@@mohdmuzammil5399 thanks so much
How much do you sell them for?
Contact me at precisesigns@gmail.com
Where are you from?
USA
what of the brand machine your use for route/wire way (like print cutting from ilustrator blueprint) *sorrybadenglish
Machine is a home made router
can you share your contact details on : +91-9680539187
@@kushalsahetya9443 precisesigns@gmail.com
dont understand what your asking
@@PreciseSigns innobowx@gmail.com
what kind of maschine is it?
Its a cnc router home built and designed by myself
@@PreciseSigns I whant yourself machine price in india currency
Your are reading sir
Sir your contact plz
What thickness PVC sheet is to be used.
Secondly to insert neon tube how deep the sheet is be engraved. Please reply.
This sign was made from 1/2 in pvc.....and the channel was .3inch deep
@@PreciseSigns 1/2" thick PVC.. But the groove was 3" thick????????
The PVC is 0.5 inch thick and the channels are 0.3inch deep
@@PreciseSigns ahhhh ok lol thanks. Great work, do you source your less rope from Amazon or alibaba
@@gthmcty111 i have a source in china.......im working on getting a promo code to get them and other accessories cheap for my patreon members
Hi what is thickness of plexiglass
Thats not plexiglass.....its called PVC and its 1/2"
@@PreciseSigns some people are using transparant plexiglass so I thought this was also plexiglass. What's name of cutting machine. It looks 3d printer machines Thanks for the answer
Please ..... Wherefrom we can buy carving machine....?
Cnc routers are sold allover u have to research.....
This one was designed and built by myself
@@PreciseSigns
Thanks a lot ...🙏
is there a cnc router you recommend? for beginners?best for acrylic? thanks!
I’d be interested in commissioning you for a sign. How do I get a hold of you?
link me at precisesigns@gmail.com
Do you still need the sign?
@@PreciseSigns what is the name that's strips? Thanks in advance. rotutronic@gmail.com
@@rotutronicrotuloselectroni6279 led neon flex
Bhai apka offs knha hai???
You think he understand Hindi ? Simple english bhi nahi malum ?
Badhy bhai pdha likha hota to office ko offs kyu likhta ab ap btao office knha hai apka mil kr btaty hai apko
Woh mera business nahi hai bhai...mera koi office nahi hai.
How much current input ? plz
Im in the USA.....we use 110v
@@PreciseSigns
tnq
India (220v)
@@rajesm22 just need to replace the power supply
Mashine price Kiya hai
Rất đẹp và tôi rất thích . Bạn có tặng tôi ko
26:00
what is the font name?
❤
Machine name
no name it was designed and built by myself
Lovely Video. whats your favourite song? Let's build Each other up O_O
Hey my brother I need you to do one for my wife please she loves this stuff her name it’s “ CAROLINA “ please I will pay you I don’t mind just need one done by 2 weeks please
please contact me at precisesigns@gmail.com
I want to make my name for streaming
Contact me at precisesigns@gmail.com
Ini pake spon ya
WhatsApp no..?
contact me at precisesigns@gmail.com
Contact number
Contact me at precisesigns@gmail.com
Your address and contact number
Contact me at precisesigns@gmail.com