We have decided to turn on our *SUPER THANKS* to make it easier to donate to the QLD Staffy Rescue. If you want to send Homey a toy/treat please consider making a donation instead! All profits raised this year we will be matching dollar for dollar! 🐾😎👍 Follow us online here 👇🤳 TikTok: vt.tiktok.com/ZSdax3gNQ/ Instagram: instagram.com/cutting_edge_engineering Facebook: facebook.com/cuttingedgeengineeringaustralia/ Official CEE Merch shop: www.ceeshop.com.au
SMART LITTLE BARSTARD . NOW MAKE SHURE YOU HOLD ON TO HOMELESS THEN YOU WILL HAVE A BIT MORE WHATE TO HELP YOU AS YOUR A LIGHT WHEAT . KEEP THEM COMING OZEY BOY .
Ya anytime I install seals they try to fight me and go in the wrong slots. It’s like a battle. But watching him do it it’s like he’s done it before. Lol
I reckon along the way he has found some ways of how not to do things, and some ways that work but takes longer than the better way. Trial and error can be a harsh way to learn.
I remember that tip you gave us about lighting and initial setting a propane torch. I have now told or shown a bunch of fellas and they all gave raving reviews on how well that works. I have fought these nuts all of my days and never thought to build a "Slug Wrench" (as we call them in Canada) for them. Your just full of winning ideas, eh Kurtis. Awesome repair bud.
I clicked on your video the microsecond you posted it, and there were 31 bloody likes there already. I get the feeling that there are a lot of people watching you Kurtis! Now to make a cuppa and enjoy the show. Cheers mate!
Very nice quality cylinder rebuild !! Also very nice torch work on the spanner wrench !! Rip parts washer brush !! Homeless is so smart what a good boy !!👍👍
Once again Kurtis it feel´s like you made this video for mee. I am struggeling with opening one of the largest cylinders on my old backhoe. It´s one that only have 2 holes on the top. And after 44 years, they are of no use. Bought several tools for it, none of them did the job. This means war! Now I´m gonna cut a spanner like yours and tack weld it in place. Som gentle brute force should do it. If not, I´ll send it to you. :) Thank´s for another great video! Cheers! /Jesper
Bloody hell Kurtis you have a steady hand! I was never that good at gas cutting, I suppose spending most lunch hours at the pub during my apprenticeship in the 70's didn't help..... As always Massive Respect from Aotearoa, New Zealand 😀👍💙💛
Ah! The Good Old Days when most of us went to the Pub for lunch at least a few times per week. Hard to believe really, but it's true. They were the Days when our pay packets had real cash in them, and the Boss provided morning and afternoon tea, with a couple of biscuits too.
I've said it before and I'll say it again , there are lots of shops , and there is You !!!!!!!! Your shop made tools and the work that comes from CEE are the best I've seen ,
Quote: 'During the move I've misplaced my laser guided dilithium wrench, so I'm going to fire up the gas axe and make one!' When it's done maybe you can sell it to SnapOn to use as a template. Absolutely fantastic knowledge regarding the hydraulic cylinder and supreme skill in manufacturing your own tools.This was a very interesting project from start to finish. The parts washer scene had me piss my pants with the music and all. This is the best episode so far.
This post brought back many memories of working mostly over in the US refurnishing, updating our large printing press gearboxes. Sometimes spending months working at national newspaper facilities. I really enjoyed those times, mostly before 911. Sometimes having to make tools just like the C-spanner, with a difference. This old engineer would make them with 2 location lugs instead of 1, it worked fine. He would say that it spread the load over 2 slots instead of 1. Working on the end users premises was fine, even when their engineering staff were watching me work. I found that working in a logical manner, just like you do, and keeping your working area as clean and tidy as possible, gave the customer confidence in my ability to do the job. Now you have all that space in the workshop you could build Homey a doggy assault course inside out of the rain. Another great post by you pair, thank you.
The C spanners Ohlins supply for the preload ring on their dampers are like that. They allow turning the ring in either direction without removing it from the damper and flipping it over
This has to be one of my favorite videos. Watching you torch cut those Gland nut and Piston nut Spanners was beautiful, Also the whole job had do dramas or issue`s. One of my favorites for sure.
I love going through these videos. Changed phone and provider so essentially I get to watch, learn and listen to giggles, like and comment all over again. Yeeeeaaaah.
I've never seen anyone free hand cut as well as you. Your ability in handling a cutting torch is incredible. Hell I've seen shipyard workers that couldn't cut a straight line when using a straightedge guide. I am always impressed with your ability to create. Thank you, Bob
Kurtis, Im sure you would've become an excellent lead design / tech lead engineer with all this knowledge and problem solving thinking. Your customers are lucky to have you.
Kurtis, I’m sure you could bring a good deal of advice to the design teams and users of these construction machines for improvements to make them easier to maintain / repair and watch for signs of using up.
Hi Kurtis and Karen, This seemed to be a relatively easy repair, even though you needed to make the two tools. Shame the cleaning brush lost it's bristles. I've had that happen a few times. Always great camera work, Karen. The outtakes are the best part and Homey is always awesome. Made a $50 Paypal donation plus added to pay the fees to QLD Staffy Rescue. A very worthy cause. Both of you and Homey stay safe.
I, for one, didn't know they had suspension systems on those things. This is new territory for my mind. Also, after watching SO MANY of your videos on hydraulic shafts and rebuilds, I feel like I could take one apart right now and teach someone what does what and why.
That’s a treat, just made breakfast 😏again and again, your video are so special! Not only showing the work in great detail, but explaining all the steps! Great video work, probably underestimated! And the safety officer (homeless)… priceless! Have a great day you two,… oeps three!
Yet again, a great video. Just started into retirement and was feeling a bit down today but you guys have turned the day around. Especially Homeless! Thanks again
The press certainly comes in handy in holding those large jobs. If the work ever dries up you will be able to go into making tools. The only trouble with a bigger workshop,there will be more places to loose tools. Another excellent masterclass. Thanks.
I appreciate how Kurtis' on recognising the efforts of an anonymous 'someone', shifted their tone to be gentler and thoughtful enough to include a few empathetic words, before cussing them in a softer tone than is reserved for 'customers'. Also; I now understand why *a* mattock made from a forklift tine 'already' had a convenient notch cut out of it... and curved tail.
I love your Aussie lingo, "flogging spanner". We Yanks call that a slugging wrench, or in the catalog, they say "striking wrench". Being an old, retired bloke now, I miss all that getting my hands all greasy type of work.
I was in suspension watching that but you sealed it, good job mate, I worked in the hydraulics industry for many years before retiring good luck for the future from the UK
This was a great episode. Not much machining, but hearing your private dialog to yourself was just great. You ought to always record it. It is as informative as when you explain the process formally. There was a lot of real humour in this one. As always, wise and skilled cinematography. One of my favourite shows, and thanks!
17:56 so satisfying to take worn out and deteriated wearables out and clean everything and put nice new stretchy lubricated stuff back on... makes it function like brand new! I used to do this with offshore oil lab equipment.
Using the press as a clamp- clever. But having a mate with the right tool so you don't have to buy is genius. Lot of people can repair stuff but you not getting anti-seize all over yourself is superhuman. One last thing you are very good at lubing 😉🙊 Must be that engineering skill.
Your efficiency on projects is something most people never achieve. I'm always impressed with just how easy you make it look. Thank you Kurtis and Karen for another great video filed with a lot of information and a lot of laughs.
Your knowledge and skill is a terrific resource for your customers. The videography and closeups of the teardown and assembly are the best on UA-cam. You can handle that cutting torch like a surgeon with a scalpel - impressive! These videos are a real treat I look forward to.
Thanks for another great video. Karin made an interesting comment: "He has so many special tools so that he can make more special tools!" We are often impressed by the various tools you have at your command to get the job done quickly and efficiently. Even more impressive is the fact that you have the knowledge and experience to use them. The two of you never disappoint and we are highly appreciative of your efforts. As an aside, that strut is an amazing piece of technology in itself! Best wishes for a peaceful and pleasant weekend.
Showing your gas axe skills are excellent. You’ll have to get Karen to buy you a CNC plasma cutting table. Karen could train on CAD and then made you all the fancy tools you’ll need, as well as other useful items. Great video
I love that you made your own tools. Something to be said for someone with the technical knowhow to adjust to their situation on the fly. Just amazing. Well done sir.
A good job well done, Kurtis. Got to say, the most impressive thing was how neat you had the cut with the oxy torch. Sure it needed a little finessing, but the cut was damn near perfect without any finishing. Not just the straightness of the freehand cuts, but the smoothness of the cut edges.
You and your wife make a great team. The work is done very well and the filming is great, we get to see all the details and the quality workmanship. Thanks! Homey is "the soft touch, as always".
Thumbs up for making your own tools. And...you made them look Good. After fighting with that inside nut the first time, their maintenance man said, "I aim't messing with that strut again".
I love the way every single one of your manipulations is so precise and well thought through. Some people in mechanical trades can be really clumsy and unable to apply correct force to anything, but your hands move like a ballet … Awesome!
I am impressed by your attention to detail, your machining abilities and your engineering. You are always on top of the problem and knowledge of how all these items are made and operate.
7:42 I call those "pocket come-along" because they do fit in the pocket of my cover-alls and it has saved me on several occasions. Enjoyed the repair and the discussion on the cylinder. This may be the first time you haven't any machining or welding on a vid. Enjoyed , take care and cheers!
So satisfying to see crap made new again! Those seals definitely have to be put in the right direction. Years ago I had a customer call me up complaining about a new hospital vacuum pump/plant he had bought. He noticed the shaft seals had been installed "backwards" that is with the expansion springs outboard. Ranting about it and wanting to return the whole damn thing (four vacuum pumps on a demand setup so either 1, 2, or all 3, would run and the 4th was for redundancy). I said: "Its a vacuum system". He: "So"? Me: Vacuum system. The seals are in the right way". Silence. Then he hangs up!
Nice video. Like I've always said the best tools you got are the ones you make. It always pisses me off when I go to tear some apart and somebody's been in there and made a complete mess then it takes me twice as long to fix it. Nice job on the video Karen keep them coming you guys be safe.
I was a Machinist Tool and Die Maker in the USA. IN fact, most of my family were also. Your level of expertise and knowledge with these parts and operations makes every video entertaining and informative. Well done, m8
You are getting really good at editing. Just showing the interesting parts without wasting our time. Just a little special effects is perfect. Again,great job!
"I don't wanna break this tool, let's just make one better suited for the task". You make it look so easy to those of us who've never picked up a tool like that before, I love it. Keep doing what you do.
We totally LOVE your videos!! You, your wife and Homey are part of every evening, now. Your material is intelligent, demonstrates the best in problem solving and skill. What a respite from the mindless JUNK on cable TV!
It is wonderful, watching the security chief, getting a good workout, and training in inspection of suspicious packages. And takedown, and securing of suspicious objects.
When you talked about the nut being tight I remembered one thing my mate told me. He works in a place that makes engines for large ships. According to him, when they tighten the bolts what are effectively head bolts, about 110 mm in diameter, they have a hydraulic machine that stretches the whole bloody bolt a wee bit. Then they just sort of hand tighten the nut and release the bolt. Not coming off without the stretcher machine I hear.
Stretched many a bolt back in the day. High pressure steam joint flanges are held together with continuous threaded studs with nuts on each end. If you know the root area of the thread, the mid nut length of engagement, the number of studs, and the modulus of elasticity for the stud material, you can mike the relaxed vs stretched length of the stud, and with a calculation determine the clamping force to a high degree of accuracy. With a little experience and a keen ear, you can listen to the sound of the blows of a single jack on the slugging wrench and draw up the studs as accurately as if you miked the stretch. Hydraulic fastener tensioning systems are great time savers but very expensive and you don't always have access in a crowded space to install the hardware and run the hoses. Speaking of clever fastener tensioning methods, who knows about stud heaters?
makes sense since tightening bolts to a prescribed torque is just one mean how to create preload/stretch of the bolt - which is the goal. We don't really care about the method used, we need that preload force - and hydraulics should be able to deliver. FYI Method - accuracy By feel ±35% Torque wrench ±25% Computer-controlled wrench ±8-15% Turn-of-nut ±15% Preload indicating washer ±10% Bolt elongation ±3−5% Strain gages ±1% Ultrasonic sensing ±1%
Another one is using what we call Supernuts it's a big nut with smaller bolts through it in a circular pattern that gets tightened on a big hardened washer as you torque the smaller bolts
Interesting content again Kurtis it’s amazing to see how these rams work under and hold as much pressure as they do. The last ram I resealed was on my engine crane probably a tenth the size of the one you just worked on. As usual great filming by Karen and of course the Safety Officer was fantastic as usual 😀👍🏻
Considering the age and state of those seals, I'm shocked the surface chrome is still in working condition. Smooth as always! Can't wait to see what activities you're going to do with all that space!!
@@CuttingEdgeEngineering Within a week of posting about the expansion the outtakes will include, "[__] me! Why isn't there ever any room in this place?" No workshop is ever big enough. Even the ones where you need a golf cart just to get around.
I wondered how long you were going to beat on it before you thought of using the forklift to push it back in. Another great job Kurt. "Anyone see my big wrench? No? Never mind, I'll just make a new one."
To my untrained eye, It's strange to see a forklift being used to service a relatively small cylinder. But then I think about the type of forces this cylinder is designed to sustain and produce. Heavy machinery is truly fascinating...
That and the fact that with the thickness of the cylinder walls, that thing is likely at least 150 Kgs. (330 Bananas er Lbs.) and thus far to heavy to safely lift by hand...
Nice work mate. Something we used to have lots of trouble with sand mining the salt water years ago. I used to fit 6in or bigger layflat hose over the exposed shafts to help stop sand and salt getting to the wiper seals and further in. We still did a few rams but definitely slowed the frequency we needed to repair the buggers. I love watching you guys having a crack mate, well done.
Sitting in a workshop in Queensland surrounded by lathes drill presses milling machines bandsaws and pipe benders drinking a stubby watching a bloke in a workshop in Queensland surrounded by lathes etc. 😀. The missus took one look at what I was watching and asked “what the hell is wrong with you”? ……….Not even gunna try to explain.
Love watching your videos and wait impatiently every week for the new one to come out. You have amazing skills and the videos are always great to watch. I also appreciate how you explain where the parts come from, what they do, and how you are repairing them. I work as an automotive mechanic and love mechanical things and you’re feeding my insanity! Best wishes from Wyoming, USA!
You could start a company building spanners that REALLY work, rather the under built, shoddy, weak spanners...the industry would thank-you for it. Infomercial on tv: "The CEE Super Spanner with lifetime guarantee...Made proudly in Australia. You order now within the next 15 minutes you get 2 spanners, yes 2! (just pay separate shipping charges). That's the CEE Super Spanner!"
Thank you for yet another brilliant video you guys! - Homey is always working hard in the rubber chicken testing department :-D Kurtis your out takes are always LOL Gold! - you could be an Awesome stand up comedian! :-D :-D...
Kurtis, have you ever had a customer watch your videos and them mention it to you later on? Maybe they might have learned something, or found that the work to do the repair was more complicated than they had thought? Anyhow, keep up the great work. These videos are a great way to start the weekend for me. Both you and Karen do a fantastic job with this channel. I hope it is driving business your way. I loved the sad bit with the dying parts washer brush. :)
Great video, as always. Any chance you could give us some details of the chemicals you prefer, parts wash fluid, degreaser for spraying, different lubes, cutting fluids/compounds, protectants etc? Everyone has their own choices but it's nice to hear others selections and maybe pick up a new option etc
@@liamthompson9342 I think it’s carb cleaner, if my memory serves from reading other replies. With so many comments it takes a while to find some of his replies. A dedicated episode going through stuff like the would be gold!
Super video this week, thanks! Question: Seeing the shape the seals were in, wouldn't you advise the customer to do both struts at once, I mean, they were rotted through?
I was a machinist and a machine repairman for a division of ITW in the states. I'm retired now but I still miss the work. I couldn't have done this better myself. I like your attention to detail and precision. Another perfect job. 👍👍👍👍👍👍👍👍👍👍👍👍
Fascinating repair. Your oxy acetelyn cutting brought back memories of my apprentice days in the early 1960s. We didn't have the luxury of a fork lift truck, the sheets of steel were on the ground in the yard and we had to use crowbars to separate them ready for cutting using old bricks to keep the sheets apart!! Your attention to detail is admirable and the care that you take should ensure that you always have grateful and satisfied customers. Best wishes.
Having dealt with fasteners in aviation that were tightened to inch-ounces, applying 6k pound-feet to a fastener is almost incomprehensible. That said a 1000 pound mass hanging six feet from center counts as that torque figure, if your mate is ever out of town or whatever.
At some point upward, too, they ought to use different units. I believe this would be 1.0 ton-yard, for example. Though it's probably all bananas to Kurtis.
@@francisschweitzer8431 Yes but those you normally assemble using both a big bath of liquid nitrogen and an even bigger oven, so that you get the 0.1mm clearance for just hand assembly, before the temperatures equalise, and they become one unit.
We have decided to turn on our *SUPER THANKS* to make it easier to donate to the QLD Staffy Rescue. If you want to send Homey a toy/treat please consider making a donation instead! All profits raised this year we will be matching dollar for dollar! 🐾😎👍
Follow us online here 👇🤳
TikTok: vt.tiktok.com/ZSdax3gNQ/
Instagram: instagram.com/cutting_edge_engineering
Facebook: facebook.com/cuttingedgeengineeringaustralia/
Official CEE Merch shop: www.ceeshop.com.au
SMART LITTLE BARSTARD . NOW MAKE SHURE YOU HOLD ON TO HOMELESS THEN YOU WILL HAVE A BIT MORE WHATE TO HELP YOU AS YOUR A LIGHT WHEAT . KEEP THEM COMING OZEY BOY .
my bad weight
NOW YOU CAN LOSE THAT ONE 🤣🤣🤣🤣🤣🤣🤣🤣🤣
You are AMAZING Karen and Kurtis how you are matching the donates. I grow up with Staffy's I love them. Oh I have Whippets now
KURTIS IS THAT BABEY OIL OR KY JELLEY 🤣🤣🤣🤣🤣🤣🤣🤣
Curtis makes the whole process look so easy. He even makes his own tools! I'm sure it must've taken years of experience.
that it has mate, thanks for watching
Ya anytime I install seals they try to fight me and go in the wrong slots. It’s like a battle. But watching him do it it’s like he’s done it before. Lol
I reckon along the way he has found some ways of how not to do things, and some ways that work but takes longer than the better way. Trial and error can be a harsh way to learn.
Kurtis is something you rarely find - a true craftsman.
he makes the machining look easy, but man, the outtakes prove he can munt up a simple recording! 🤣🤣🤣🤣 thank heavens for his videographer and editor!
I remember that tip you gave us about lighting and initial setting a propane torch. I have now told or shown a bunch of fellas and they all gave raving reviews on how well that works. I have fought these nuts all of my days and never thought to build a "Slug Wrench" (as we call them in Canada) for them. Your just full of winning ideas, eh Kurtis. Awesome repair bud.
I clicked on your video the microsecond you posted it, and there were 31 bloody likes there already. I get the feeling that there are a lot of people watching you Kurtis! Now to make a cuppa and enjoy the show. Cheers mate!
😯 seriously blows our minds the support we get from around the world! Very grateful 🙏
1 hour later almost 9000 views
Clearly the folrklift is part of Kurtis's tool arsenal!!! Oh how I love the laughter in the outtakes. Thanks for sharing.
Very nice quality cylinder rebuild !! Also very nice torch work on the spanner wrench !! Rip parts washer brush !! Homeless is so smart what a good boy !!👍👍
Wow, Curtis cutting the inside section of the nut removal tool was also amazing!!!
Once again Kurtis it feel´s like you made this video for mee. I am struggeling with opening one of the largest cylinders on my old backhoe. It´s one that only have 2 holes on the top. And after 44 years, they are of no use. Bought several tools for it, none of them did the job. This means war! Now I´m gonna cut a spanner like yours and tack weld it in place. Som gentle brute force should do it. If not, I´ll send it to you. :) Thank´s for another great video! Cheers! /Jesper
Hey Jesper well there you go mate glad it has helped and all the best with getting your cylinder disassembled 😎👊
Bloody hell Kurtis you have a steady hand!
I was never that good at gas cutting, I suppose spending most lunch hours at the pub during my apprenticeship in the 70's didn't help.....
As always
Massive Respect from Aotearoa, New Zealand
😀👍💙💛
Ah! The Good Old Days when most of us went to the Pub for lunch at least a few times per week. Hard to believe really, but it's true. They were the Days when our pay packets had real cash in them, and the Boss provided morning and afternoon tea, with a couple of biscuits too.
I've said it before and I'll say it again , there are lots of shops , and there is You !!!!!!!! Your shop made tools and the work that comes from CEE are the best I've seen ,
thanks very much mate 😎👍
I saw more 'cutting of edges' in this video than any other 'cutting edge engineering' videos of all time!
Mrs Cutting Edge is doing a phenomenal job with the filming/editing. Well done!
Thank you Paul! 😁😁😁
Yes, Karen finds beauty in what some would consider to be industrial applications.
Absolutely! Some of the best videography is here!
Quote: 'During the move I've misplaced my laser guided dilithium wrench, so I'm going to fire up the gas axe and make one!'
When it's done maybe you can sell it to SnapOn to use as a template.
Absolutely fantastic knowledge regarding the hydraulic cylinder and supreme skill in manufacturing your own tools.This was a very interesting project from start to finish.
The parts washer scene had me piss my pants with the music and all. This is the best episode so far.
No need for CAD modeling and design or a water jet cutting system when all you need is a crayon and a torch! Well done!
Glad you enjoyed this one mate we appreciate the comment 😎👍
@@rsmith3062 cardboard aided design
Snap-On has one on the truck all the time, it's only $10.00 a month, for the rest of your life.
This post brought back many memories of working mostly over in the US refurnishing, updating our large printing press gearboxes. Sometimes spending months working at national newspaper facilities. I really enjoyed those times, mostly before 911. Sometimes having to make tools just like the C-spanner, with a difference. This old engineer would make them with 2 location lugs instead of 1, it worked fine. He would say that it spread the load over 2 slots instead of 1. Working on the end users premises was fine, even when their engineering staff were watching me work. I found that working in a logical manner, just like you do, and keeping your working area as clean and tidy as possible, gave the customer confidence in my ability to do the job. Now you have all that space in the workshop you could build Homey a doggy assault course inside out of the rain. Another great post by you pair, thank you.
The C spanners Ohlins supply for the preload ring on their dampers are like that.
They allow turning the ring in either direction without removing it from the damper and flipping it over
This has to be one of my favorite videos. Watching you torch cut those Gland nut and Piston nut Spanners was beautiful, Also the whole job had do dramas or issue`s. One of my favorites for sure.
I love going through these videos. Changed phone and provider so essentially I get to watch, learn and listen to giggles, like and comment all over again. Yeeeeaaaah.
I've never seen anyone free hand cut as well as you. Your ability in handling a cutting torch is incredible. Hell I've seen shipyard workers that couldn't cut a straight line when using a straightedge guide. I am always impressed with your ability to create.
Thank you, Bob
I too am impressed by your steady hand , I am wondering why you dont have a plasma torch ???
Thanks mate you'd enjoy the torch cutting Isaac at IC Weld can do!
@@riliwi I have a small unimig plasma cutter but doesn't work the best with plate over 10mm 😂
Not to diminish Kurtis' excellent abilities, but check out I C Weld channel run by Mr Isaac Carrion.
right? same here
Kurtis, Im sure you would've become an excellent lead design / tech lead engineer with all this knowledge and problem solving thinking. Your customers are lucky to have you.
Kurtis, I’m sure you could bring a good deal of advice to the design teams and users of these construction machines for improvements to make them easier to maintain / repair and watch for signs of using up.
Agree, would have loved to have a guy like him in any one of my engineering teams.
Love those handmade spanners. Brilliant and conscientious work as always. A pleasure to watch.
I like the way you and karen make videos : good light, good focus, good angles, good field of view, and good sound quality.
Such attention to detail and not taking shortcuts my hat is off to you sir
Hi Kurtis and Karen,
This seemed to be a relatively easy repair, even though you needed to make the two tools. Shame the cleaning brush lost it's bristles. I've had that happen a few times. Always great camera work, Karen. The outtakes are the best part and Homey is always awesome. Made a $50 Paypal donation plus added to pay the fees to QLD Staffy Rescue. A very worthy cause. Both of you and Homey stay safe.
Hey Don you're a legend mate they do some really great work with caring & re-homing Staffies thanks for supporting them!
I, for one, didn't know they had suspension systems on those things. This is new territory for my mind. Also, after watching SO MANY of your videos on hydraulic shafts and rebuilds, I feel like I could take one apart right now and teach someone what does what and why.
That's awesome mate. We've probably got 300K apprentices in the making 🤣👍
That’s a treat, just made breakfast 😏again and again, your video are so special! Not only showing the work in great detail, but explaining all the steps! Great video work, probably underestimated! And the safety officer (homeless)… priceless! Have a great day you two,… oeps three!
Thank you so much 😀 glad you enjoy the video
Your presicion and accuracy with the torch is astoundin! Hats off.
Man I love it can’t get enough I’ve watched all the videos over and over I just want more
Yet again, a great video. Just started into retirement and was feeling a bit down today but you guys have turned the day around. Especially Homeless! Thanks again
Hey mate congrats on your retirement! Enjoy it
The press certainly comes in handy in holding those large jobs. If the work ever dries up you will be able to go into making tools. The only trouble with a bigger workshop,there will be more places to loose tools. Another excellent masterclass. Thanks.
haha true that, might get into commercial tool making one day!
producing the tools needed for the task - level genius.
Me and Dad did it all the time on the farm.
@@steveg8337 👏
Level Maintenance.
Level - necessary…. Lol
Level - SOP
I appreciate how Kurtis' on recognising the efforts of an anonymous 'someone', shifted their tone to be gentler and thoughtful enough to include a few empathetic words, before cussing them in a softer tone than is reserved for 'customers'.
Also; I now understand why *a* mattock made from a forklift tine 'already' had a convenient notch cut out of it... and curved tail.
LOVE THIS GUY ....A CLASS ACT WITH SUPER SKILLS OF KNOWLEDGE. LOVE HOMMY TOO. THIS FAMILY ARE ROLE MODELS !
Great job and good vídeo with excelent editing. The end it's very funny. Greetings Kurtis and Karen from Portugal 🇵🇹
The camera jokey and editor of these videos is amazing.
Say hi to Karen. She's good value.
It's refreshing on UA-cam to see shapes cut from steel plate without a CAD program and a plasma table. Thank you Curtis!
I love your Aussie lingo, "flogging spanner". We Yanks call that a slugging wrench, or in the catalog, they say "striking wrench". Being an old, retired bloke now, I miss all that getting my hands all greasy type of work.
I was in suspension watching that but you sealed it, good job mate, I worked in the hydraulics industry for many years before retiring good luck for the future from the UK
Cheers mate respect!
Really love the effort to show us where the part is used! Extremely high quality content!
This was a great episode. Not much machining, but hearing your private dialog to yourself was just great. You ought to always record it. It is as informative as when you explain the process formally. There was a lot of real humour in this one. As always, wise and skilled cinematography. One of my favourite shows, and thanks!
Thanks! Best metal working channel on UA-cam!
Hey Ryan thanks for the support mate!
17:56 so satisfying to take worn out and deteriated wearables out and clean everything and put nice new stretchy lubricated stuff back on... makes it function like brand new!
I used to do this with offshore oil lab equipment.
absolutely, was good to see it looking like new
Using the press as a clamp- clever.
But having a mate with the right tool so you don't have to buy is genius.
Lot of people can repair stuff but you not getting anti-seize all over yourself is superhuman.
One last thing you are very good at lubing 😉🙊
Must be that engineering skill.
had plenty of practice lubing things up 😂 top comment mate thanks for supporting the vids each week
Your efficiency on projects is something most people never achieve. I'm always impressed with just how easy you make it look. Thank you Kurtis and Karen for another great video filed with a lot of information and a lot of laughs.
You do awesome work and the camera lady keeps you together and homeless is just beautiful
You guys have no idea how much enjoyment your videos bring me, huge thanks from North Carolina!
Your knowledge and skill is a terrific resource for your customers. The videography and closeups of the teardown and assembly are the best on UA-cam. You can handle that cutting torch like a surgeon with a scalpel - impressive! These videos are a real treat I look forward to.
Thanks for another great video. Karin made an interesting comment: "He has so many special tools so that he can make more special tools!" We are often impressed by the various tools you have at your command to get the job done quickly and efficiently. Even more impressive is the fact that you have the knowledge and experience to use them. The two of you never disappoint and we are highly appreciative of your efforts. As an aside, that strut is an amazing piece of technology in itself! Best wishes for a peaceful and pleasant weekend.
You make installing those seals so easy. I normally have to warm them up soften them then install. Love your work.
Kurtis is in what is sometimes, sunny Queensland. That is why Kurtis doesn't need to heat them up. :)
@@jemijona Bloody wet Queensland, at the time of posting.
lucky this time perfect for reco ,plus a few hand made flogging c-spanners to do the job awsome Kurtis
As usual, another video on something that I know nothing about, but still found very interesting, educational and entertaining.
Showing your gas axe skills are excellent. You’ll have to get Karen to buy you a CNC plasma cutting table. Karen could train on CAD and then made you all the fancy tools you’ll need, as well as other useful items. Great video
I love that you made your own tools. Something to be said for someone with the technical knowhow to adjust to their situation on the fly. Just amazing. Well done sir.
A good job well done, Kurtis. Got to say, the most impressive thing was how neat you had the cut with the oxy torch. Sure it needed a little finessing, but the cut was damn near perfect without any finishing. Not just the straightness of the freehand cuts, but the smoothness of the cut edges.
Issac does pretty good work with a torch too, I never could of, of course I didn’t have to
Always a pleasure! Thank you Karen, Homey, and of course, Kurtis.👍🏻😁💚
The flogging will continue until the fun ends :) Totally awesome.
There's nothing like a good flogging first thing in the morning to keep staff morale up ;-)
You got that right! lol giggity
You and your wife make a great team. The work is done very well and the filming is great, we get to see all the details and the quality workmanship. Thanks! Homey is "the soft touch, as always".
No such a thing as a difficult job, as long as you have the right size whack'o meter.
Nice one curtis
Hahaa true that mate thanks for watching
Thumbs up for making your own tools. And...you made them look Good. After fighting with that inside nut the first time, their maintenance man said, "I aim't messing with that strut again".
Curtis, you have such a great mechanical vocabulary. Accurate words for parts, processes and actions.
I love that mini comealong, cracks me up every time. Looks like a great little unit though, nice and light.
Agreed. That's a NICE tool. I want one.
I love the way every single one of your manipulations is so precise and well thought through. Some people in mechanical trades can be really clumsy and unable to apply correct force to anything, but your hands move like a ballet … Awesome!
I am impressed by your attention to detail, your machining abilities and your engineering. You are always on top of the problem and knowledge of how all these items are made and operate.
I like how the video opened featuring that very happy little boy.
It is obvious Curtis has talent. As a 77 year old ex HD mechanic I think he must have had some great instruction/instructors.
7:42 I call those "pocket come-along" because they do fit in the pocket of my cover-alls and it has saved me on several occasions. Enjoyed the repair and the discussion on the cylinder. This may be the first time you haven't any machining or welding on a vid. Enjoyed , take care and cheers!
that's a good name for them they are very cute and small lol
So satisfying to see crap made new again! Those seals definitely have to be put in the right direction. Years ago I had a customer call me up complaining about a new hospital vacuum pump/plant he had bought. He noticed the shaft seals had been installed "backwards" that is with the expansion springs outboard. Ranting about it and wanting to return the whole damn thing (four vacuum pumps on a demand setup so either 1, 2, or all 3, would run and the 4th was for redundancy). I said: "Its a vacuum system". He: "So"? Me: Vacuum system. The seals are in the right way". Silence. Then he hangs up!
Nice video. Like I've always said the best tools you got are the ones you make. It always pisses me off when I go to tear some apart and somebody's been in there and made a complete mess then it takes me twice as long to fix it. Nice job on the video Karen keep them coming you guys be safe.
I was a Machinist Tool and Die Maker in the USA. IN fact, most of my family were also. Your level of expertise and knowledge with these parts and operations makes every video entertaining and informative. Well done, m8
Brings back memories of making wrenches for assembly boat plumbing.
You are getting really good at editing. Just showing the interesting parts without wasting our time. Just a little special effects is perfect. Again,great job!
Thank you for the feedback!
I myself would gladly watch an almost unedited version. Love to watch this man work.
"I don't wanna break this tool, let's just make one better suited for the task". You make it look so easy to those of us who've never picked up a tool like that before, I love it. Keep doing what you do.
In best Aussie tradition: "That's not a spanner! - THIS is a spanner!"
Beat me to it! Lol
You cannae hand a man a grander spanner.......wanna bet!
@@glennbrown1961 ... Sidchrome! 🙂
That’s not a spanner… that’s a spoon.
😂😂😂😂😂😂
We totally LOVE your videos!! You, your wife and Homey are part of every evening, now. Your material is intelligent, demonstrates the best in problem solving and skill. What a respite from the mindless JUNK on cable TV!
It is wonderful, watching the security chief, getting a good workout, and training in inspection of suspicious packages. And takedown, and securing of suspicious objects.
When you talked about the nut being tight I remembered one thing my mate told me. He works in a place that makes engines for large ships. According to him, when they tighten the bolts what are effectively head bolts, about 110 mm in diameter, they have a hydraulic machine that stretches the whole bloody bolt a wee bit. Then they just sort of hand tighten the nut and release the bolt. Not coming off without the stretcher machine I hear.
Yeah mate very common way to tighten a bolt if the are big fuckoff bolts!
Just make sure the nuts are not those from Bob's Buck-a-Pop Shop!
Stretched many a bolt back in the day. High pressure steam joint flanges are held together with continuous threaded studs with nuts on each end. If you know the root area of the thread, the mid nut length of engagement, the number of studs, and the modulus of elasticity for the stud material, you can mike the relaxed vs stretched length of the stud, and with a calculation determine the clamping force to a high degree of accuracy. With a little experience and a keen ear, you can listen to the sound of the blows of a single jack on the slugging wrench and draw up the studs as accurately as if you miked the stretch. Hydraulic fastener tensioning systems are great time savers but very expensive and you don't always have access in a crowded space to install the hardware and run the hoses.
Speaking of clever fastener tensioning methods, who knows about stud heaters?
makes sense since tightening bolts to a prescribed torque is just one mean how to create preload/stretch of the bolt - which is the goal. We don't really care about the method used, we need that preload force - and hydraulics should be able to deliver. FYI
Method - accuracy
By feel ±35%
Torque wrench ±25%
Computer-controlled wrench ±8-15%
Turn-of-nut ±15%
Preload indicating washer ±10%
Bolt elongation ±3−5%
Strain gages ±1%
Ultrasonic sensing ±1%
Another one is using what we call Supernuts it's a big nut with smaller bolts through it in a circular pattern that gets tightened on a big hardened washer as you torque the smaller bolts
Interesting content again Kurtis it’s amazing to see how these rams work under and hold as much pressure as they do. The last ram I resealed was on my engine crane probably a tenth the size of the one you just worked on. As usual great filming by Karen and of course the Safety Officer was fantastic as usual 😀👍🏻
Excellent content
It takes a team, and they've got a good one!
Considering the age and state of those seals, I'm shocked the surface chrome is still in working condition. Smooth as always! Can't wait to see what activities you're going to do with all that space!!
yeah was surprised the chrome was still so tidy. Looking forward to sharing the expansion with you all!
@@CuttingEdgeEngineering Within a week of posting about the expansion the outtakes will include, "[__] me! Why isn't there ever any room in this place?"
No workshop is ever big enough. Even the ones where you need a golf cart just to get around.
I wondered how long you were going to beat on it before you thought of using the forklift to push it back in. Another great job Kurt. "Anyone see my big wrench? No? Never mind, I'll just make a new one."
Kurtis has taught me an important life lesson today. Purchase cutting torch and can build all the tools I’ll need! 😁 cheers
To my untrained eye, It's strange to see a forklift being used to service a relatively small cylinder. But then I think about the type of forces this cylinder is designed to sustain and produce. Heavy machinery is truly fascinating...
That and the fact that with the thickness of the cylinder walls, that thing is likely at least 150 Kgs. (330 Bananas er Lbs.) and thus far to heavy to safely lift by hand...
@@HappilyHomicidalHooligan I was talking about 32:50 :)
@@GeorgeD1 Ah. I hadn't actually watched to that point yet when I made my initial comment...
I sit Corrected...
😄😁😆😅😂🤣
Nice work mate. Something we used to have lots of trouble with sand mining the salt water years ago. I used to fit 6in or bigger layflat hose over the exposed shafts to help stop sand and salt getting to the wiper seals and further in. We still did a few rams but definitely slowed the frequency we needed to repair the buggers. I love watching you guys having a crack mate, well done.
They put rubber bellows on high end car shocks. I makes you wonder why don't do the same for very expensive hydraulic rams 🤔
@@assassinlexx1993they do, look at the back of a lorry with lift.
Man this is something that needs to be taught more your knowledge on everything is amazing stuff like this that is awsome love watching keep it up !
Bloody 740 struts , absolute mongrels of things to change ! 👍👍👍
Excellent work Kurtis and Karen! Our respect from Greece!
Sitting in a workshop in Queensland surrounded by lathes drill presses milling machines bandsaws and pipe benders drinking a stubby watching a bloke in a workshop in Queensland surrounded by lathes etc. 😀. The missus took one look at what I was watching and asked “what the hell is wrong with you”? ……….Not even gunna try to explain.
Hahaa too good mate I understand and do the same myself 🤣👊
@@CuttingEdgeEngineering
Cheers. Nice steady hand on the Oxy by the way👍. Belting down rain (just south of Bundy) hope you’re not getting too wet
Love watching your videos and wait impatiently every week for the new one to come out. You have amazing skills and the videos are always great to watch. I also appreciate how you explain where the parts come from, what they do, and how you are repairing them. I work as an automotive mechanic and love mechanical things and you’re feeding my insanity! Best wishes from Wyoming, USA!
hey mate thanks for watching and sharing some great feedback we appreciate the support
You could start a company building spanners that REALLY work, rather the under built, shoddy, weak spanners...the industry would thank-you for it.
Infomercial on tv:
"The CEE Super Spanner with lifetime guarantee...Made proudly in Australia. You order now within the next 15 minutes you get 2 spanners, yes 2! (just pay separate shipping charges). That's the CEE Super Spanner!"
hahaa love it mate, you never know maybe one day!
@@CuttingEdgeEngineering "But Wait! There's More!"
Yet another Aussie vocabulary lesson, “flogging spanner”. Love it. Great video as always!
Looks like they're called that because once you put them on the part, you give them a right flogging until the part's loose.
Blooper reel for this one is EPIC. A poor parts brush that has gone bald, and a rod with no balls. LOL!
Grand job to the entire CEE crew.
Thank you for yet another brilliant video you guys! - Homey is always working hard in the rubber chicken testing department :-D Kurtis your out takes are always LOL Gold! - you could be an Awesome stand up comedian! :-D :-D...
None quite that size but made plenty of gland tools with shaft collars and welding on pieces of keyway to fit.
Kurtis, have you ever had a customer watch your videos and them mention it to you later on? Maybe they might have learned something, or found that the work to do the repair was more complicated than they had thought?
Anyhow, keep up the great work. These videos are a great way to start the weekend for me. Both you and Karen do a fantastic job with this channel. I hope it is driving business your way. I loved the sad bit with the dying parts washer brush. :)
hey mate yeah quite often actually they're usually very shocked of what goes into what they think is a "basic" job 😂
@@CuttingEdgeEngineeringYou're so good at it you make it look easy, which it isn't! ❤
Kurtis is wise behind his years , I believe he is the Albert Einstein of Machinists
I am 67 years old and, I learn something new with every video
Did he say 6,000 ft/lbs?!!!
Great video, as always.
Any chance you could give us some details of the chemicals you prefer, parts wash fluid, degreaser for spraying, different lubes, cutting fluids/compounds, protectants etc?
Everyone has their own choices but it's nice to hear others selections and maybe pick up a new option etc
I'd sure like to see that too. The why behind the choices is just so valuable.
hey mate will keep that in mind to share on a future video 😎👍
Any out of the ordinary tools that may be of interest to the homegamer with a workshop, drill bits etc that are worth the cost etc
Yeah I'd love to know what that washoff stuff in the pump sprayer is. Seems just like water but I'm assuming it's not water.
@@liamthompson9342 I think it’s carb cleaner, if my memory serves from reading other replies. With so many comments it takes a while to find some of his replies. A dedicated episode going through stuff like the would be gold!
Super video this week, thanks! Question: Seeing the shape the seals were in, wouldn't you advise the customer to do both struts at once, I mean, they were rotted through?
Yeah did mention it but the other one wasn't in the same shape as this one
@@CuttingEdgeEngineering Sorry, missed it.
I was a machinist and a machine repairman for a division of ITW in the states. I'm retired now but I still miss the work.
I couldn't have done this better myself. I like your attention to detail and precision.
Another perfect job.
👍👍👍👍👍👍👍👍👍👍👍👍
Cheers mate respect to you 😎👊
Fascinating repair. Your oxy acetelyn cutting brought back memories of my apprentice days in the early 1960s. We didn't have the luxury of a fork lift truck, the sheets of steel were on the ground in the yard and we had to use crowbars to separate them ready for cutting using old bricks to keep the sheets apart!! Your attention to detail is admirable and the care that you take should ensure that you always have grateful and satisfied customers. Best wishes.
Having dealt with fasteners in aviation that were tightened to inch-ounces, applying 6k pound-feet to a fastener is almost incomprehensible. That said a 1000 pound mass hanging six feet from center counts as that torque figure, if your mate is ever out of town or whatever.
Notice the Schrader Valves on this strut… same as on a landing gear strut
At some point upward, too, they ought to use different units. I believe this would be 1.0 ton-yard, for example. Though it's probably all bananas to Kurtis.
extraterrestrial units of measurement.
Team metric
@@francisschweitzer8431 Yes but those you normally assemble using both a big bath of liquid nitrogen and an even bigger oven, so that you get the 0.1mm clearance for just hand assembly, before the temperatures equalise, and they become one unit.