Hey Jason. Easiest way to unhook the battery is slide tweezers down under the cable next to the board between the board and battery and lift. No chance to short it. Also the foam is water proofing. Many water damaged 6S the FPC is hardly ever damaged. Components around the gasket usually are though.
Thank u! :) I always screw everything up when the cameras are recording. Sometimes I disconnect the battery using a flat-head between the metal shield that covers L1604 / C1648 & the battery connector. Also no chance of short and puts very little stress on the connector.... just don't get ur tweezers under that shield! :D
Just tried your method for disconnecting battery. That works quite nice :) Probably do it like that from now on and it will keep me from picking up a different tool.
What I normally do tin the FL4211 under the microscope before placing it, The extra solder bit on the FL4211 makes it easier to solder on to the board.
I'm pushing some really cheap stuff to the limits on these videos. Hoping to upgrade the microscope video before too much longer. Thank you for commenting! :)
Hi Jason, i had a Amscope, and i need to buy a camera. But i can see that you have more things like lens adapter...can you explain me what exactly i need? Many Thanks
I have the same issue here half backlight on right hand side of the screen, did the same jumper as you do it but problem still not solved any help? And thank you so very much I really really learn a whole lot of stuffs in your videos.
hi sts. nice repairs here. at 52' you say that using super glue to make that wire stay in place. instead of glue you can use uv curable solder mask. search for that it has some appliance when you microsoldering. keep up the good work
I can't find the link of the company you buy motherboard parts (sach as resistor, filter, capacitor and etc), could you please give me that link? Actually you mentioned once on one of your videos, but I can't find that either! By the way, good job, I've learnt alot from your videos, keep doing it! :) Waiting for your reply!!
I have a similar case, the screen is dark but the touch works and the phone itself works. there is nothing on the screen even under the flashlight. at the last insertion of the display, a huge Spark went and the phone no longer turned on the screen. a spark or, in fact, a flame appeared exactly in the place being repaired on your video
Yep.. Making videos is part of the business these days Jason.. The customers have to understand more IMHO. As you know the actual recording of the video is relatively quick and doesn't effect normal duties too much. However the editing is the most time consuming part, well it is for me anyway :) .. and mine is normally done in the evening. Cheers mate John
Hey John, this is very true indeed. The editing takes forever but is absolutely necessary. Without it there would be (more) long drawn out periods of nothing and the videos would just be awful. lol Thanks for commenting :)
Again, thanks for the video! A question: I see you disassemble the phone and just put the screws on the magnetic sheet. How do you keep track of which screw goes where on the reassembly? I realize that you do this a lot, but the differences in the screw lengths is so minute.
it looks like he does what I do, you place them on the pad in the shape of where you took them out. you have a mental pattern on the pad. doing that its pretty hard to mess them up.
hi jeson . thans for all. i have a question to you. how you remove the black silicone on the mainboars (iphone,samsung etc.) Which chemical liquid Yada brand product?? thanks Sir.
Jason bro great video as always!!! Man which eye cover is that on your eyepieces I just got the sm-4tp but it did not bring those man and I even asked the sales girl :(
Nice repair. you do an awesome job. Wouldnt it make more sense putting the filter "fuse" at the Test point so if the phone comes back you dont have to remove the shield to replace the filter again?
Thank you! :) That was really tempting but, I've installed this jumper before and accidentally shorted it. It sort of flashes light a light bulb and then I wound up having to replace driver, coils and diodes. I really only installed it there for protection of the circuit. The fuse is generally to prevent fire hazards in most appliances.. I highly doubt this could be a fire hazard but I wired it as such. It could be possible to put a larger "fuse" at the beginning where I put mine, then a lesser value one at the end at end before the test point. That would ease the repair for the next guy. I really just wanted to be sure my wire couldn't cause any negative affects... like, fires - if someone happens to be installing a screen in a room filled with propane fumes, and shorts the backlight again.. hahaha! :D
Ah yeah that makes total sense, you want the fuse closest to the power source to avoid Murphys Law with that jumper wire. Something one learns the hard way sometimes lol.
You doing a great job can you help me with this picture I tried to fixing my iPhone and I cut this cable and I don't know from where and my phone back light and front camera not working
Good afternoon, Master! I followed 100% your video, I did everything right, it went all right. But the display was left with a black spot in the upper left corner. In another 6s it lights up normal. Do you know if there's anything wrong with the backlight yet? Since I already thank you very much for your video and congratulations for the success. Hug ...
Hello sir. I have same issue and i try the same jumper and works but just few days it becomes ni image. What can i do for this. Hope you can give a tips.
"a lot of people jumped my ass about this metal tool" Hah, whoever did is an idiot. I use an isesamo to open pretty much every electronic I work on, phones included. I've tried using plastic pry tools and spudgers and they're just too flimsy and brittle to do the job. I've been using the same isesamo for years.
I try to use mainly PDF files that are leaked out all over the place. But for the connections your talking about - www.zxwtools.com. Easier to purchase through amazon.com though.
FRIEND GOOD AFTERNOON I WOULD LIKE TO KNOW WHERE I CAN GET THOSE DIAGRAMS, PILLS, OR SCHEMATIC ... IN REALITY I DO NOT KNOW HIS TRUE NAME! BUT I WOULD LIKE TO HAVE THEM AS I HAVE A IPHONE 6S AND DAMAGE A TRACKS OF THE IC U4020 ME COULD HELP?
I have the AmScope SM-4TPZ Professional Trinocular Stereo Zoom Microscope. What size power lens are you using? I purchased two 0.5X lens and they still don't magnify enough to give me much working room as I see in your video. Can you tell me what power lens you are using? I have about 3 inches of working space between the bottom of the lens to the board. I am just learning this and love watching your videos and recently purchased all the stuff needed. Thanks
Chabasco Looney I have the same scope and a 0.5x lens. The scope has an adjustable zoom feature. I can get a wide range of FOV and zoom out of it and that's with the boom stand at the lowest possible setting and the optical assembly as low as it will go on the focal distance rail. I can't zoom in all the way of course but I can get pretty darn close. Close enough to do trace repair on flex cables.
With the wire you are using, that "fuse" probably wasn't required. FL4291 is rated at 350mA, which would require about a 26 AWG jumper wire - which is way too big for this repair. Looks to me that the wire you used was near 36 AWG which is only rated for 35mA. - Here's a link to a wire size / amperage chart: diyaudioprojects.com/Technical/American-Wire-Gauge/
Hey Jason. Easiest way to unhook the battery is slide tweezers down under the cable next to the board between the board and battery and lift. No chance to short it.
Also the foam is water proofing. Many water damaged 6S the FPC is hardly ever damaged. Components around the gasket usually are though.
Thank u! :) I always screw everything up when the cameras are recording. Sometimes I disconnect the battery using a flat-head between the metal shield that covers L1604 / C1648 & the battery connector. Also no chance of short and puts very little stress on the connector.... just don't get ur tweezers under that shield! :D
Just tried your method for disconnecting battery. That works quite nice :) Probably do it like that from now on and it will keep me from picking up a different tool.
B&C Connection LLC iiiiii
GOOD JOB BRO..IT'S WORKING NOW MY 6S PLUS BACK LIGHT WORKS NOW THANK YOU AND KEEP IT UP.
Jason has not yet updated the ZXW to version 2.4??? it´s amazing¡¡¡
Hands down really clean work. Jumper is almost undetectable.
Thank u!
What I normally do tin the FL4211 under the microscope before placing it, The extra solder bit on the FL4211 makes it easier to solder on to the board.
for only 6.6k subs you have really amazing audio and video, good job :)
I'm pushing some really cheap stuff to the limits on these videos. Hoping to upgrade the microscope video before too much longer. Thank you for commenting! :)
STS Telecom thanks for replying, would you be able to suggest a Usb microscope for my amscope that isn't a piece of shit?
Hi Jason, i had a Amscope, and i need to buy a camera. But i can see that you have more things like lens adapter...can you explain me what exactly i need? Many Thanks
Wow i just had the same repair this morning, same phone same filters same hole. Did the same jumper except the filter. :)
How much you charge like this stream very hard work..😬😎
I have the same issue here half backlight on right hand side of the screen, did the same jumper as you do it but problem still not solved any help? And thank you so very much I really really learn a whole lot of stuffs in your videos.
I had to keep going with the video....thats was incredible....loved yr lense what the name
hi sts. nice repairs here. at 52' you say that using super glue to make that wire stay in place. instead of glue you can use uv curable solder mask. search for that it has some appliance when you microsoldering. keep up the good work
I can't find the link of the company you buy motherboard parts (sach as resistor, filter, capacitor and etc), could you please give me that link?
Actually you mentioned once on one of your videos, but I can't find that either!
By the way, good job, I've learnt alot from your videos, keep doing it! :)
Waiting for your reply!!
I have a similar case, the screen is dark but the touch works and the phone itself works. there is nothing on the screen even under the flashlight. at the last insertion of the display, a huge Spark went and the phone no longer turned on the screen. a spark or, in fact, a flame appeared exactly in the place being repaired on your video
I love your videos. I'm eating it up like a free microsoldering course....keep it up!
Hi! Thanks for your videos! I'm wondering where do get this jumper wires? Thanks
You're welcome!. The wire in this video came from an old 120VAC electric fan motor.
Yep.. Making videos is part of the business these days Jason.. The customers have to understand more IMHO. As you know the actual recording of the video is relatively quick and doesn't effect normal duties too much. However the editing is the most time consuming part, well it is for me anyway :) .. and mine is normally done in the evening.
Cheers mate
John
Hey John, this is very true indeed. The editing takes forever but is absolutely necessary. Without it there would be (more) long drawn out periods of nothing and the videos would just be awful. lol
Thanks for commenting :)
Again, thanks for the video!
A question: I see you disassemble the phone and just put the screws on the magnetic sheet. How do you keep track of which screw goes where on the reassembly? I realize that you do this a lot, but the differences in the screw lengths is so minute.
it looks like he does what I do, you place them on the pad in the shape of where you took them out. you have a mental pattern on the pad. doing that its pretty hard to mess them up.
hi jeson . thans for all.
i have a question to you.
how you remove the black silicone on the mainboars (iphone,samsung etc.)
Which chemical liquid Yada brand product??
thanks Sir.
Sahin Savas Sezer you can remove this with tweezer n hot air..
Jason bro great video as always!!!
Man which eye cover is that on your eyepieces I just got the sm-4tp but it did not bring those man and I even asked the sales girl :(
how much is the repair?
permanent fix?
you are an inspiration to me
Nice repair. you do an awesome job. Wouldnt it make more sense putting the filter "fuse" at the Test point so if the phone comes back you dont have to remove the shield to replace the filter again?
Thank you! :) That was really tempting but, I've installed this jumper before and accidentally shorted it. It sort of flashes light a light bulb and then I wound up having to replace driver, coils and diodes. I really only installed it there for protection of the circuit. The fuse is generally to prevent fire hazards in most appliances.. I highly doubt this could be a fire hazard but I wired it as such. It could be possible to put a larger "fuse" at the beginning where I put mine, then a lesser value one at the end at end before the test point. That would ease the repair for the next guy. I really just wanted to be sure my wire couldn't cause any negative affects... like, fires - if someone happens to be installing a screen in a room filled with propane fumes, and shorts the backlight again.. hahaha! :D
Ah yeah that makes total sense, you want the fuse closest to the power source to avoid Murphys Law with that jumper wire. Something one learns the hard way sometimes lol.
Hi sir, could you tell me the thickness of that wire?
Bought one but too thin, that looks nice to me.
You doing a great job can you help me with this picture I tried to fixing my iPhone and I cut this cable and I don't know from where and my phone back light and front camera not working
Good afternoon, Master! I followed 100% your video, I did everything right, it went all right. But the display was left with a black spot in the upper left corner. In another 6s it lights up normal. Do you know if there's anything wrong with the backlight yet? Since I already thank you very much for your video and congratulations for the success. Hug ...
Is this filter necessary? Is it not right that only wire acting like a fuse?
Ive replaced my motherboard and screen on my 6s and screen is like dim in sunlight and pretty hard to see did I do some damage?
Hello jhon whats the coating you put to hide the jumper? Whats the name of it? Beautiful work!
Hey Jason, thanx for your videos! What type of coating did you use to cover that jumper wire?
hello thank you for your all video.
please what is the brand of your tweezers and when its possible to buy please ?
thank you sir
I got a iPhone 6 with back light out can I send it to you and if so how much will it cost
Good day sir, did you encountered any iphone that related to icloud issue?
You very neat bro, excellent repair. Motivates me as a technitian. Keep it up
Hello sir. I have same issue and i try the same jumper and works but just few days it becomes ni image. What can i do for this. Hope you can give a tips.
Dankeschön Du hast mir sehr geholfen, Daumen Hoch hat funktioniert! Danke
Hi, can you share this electric scheme for iphone software for me?
"a lot of people jumped my ass about this metal tool"
Hah, whoever did is an idiot. I use an isesamo to open pretty much every electronic I work on, phones included. I've tried using plastic pry tools and spudgers and they're just too flimsy and brittle to do the job. I've been using the same isesamo for years.
hi..when power on apple ipad air apple logo came and go soon but ipad still working...
hey Jason what is the name on dis Black silicone you use on the jumper
Why couldn't you run the wire from the rest point to blown pad?
HI .
GOOD VIDEO!!
What FLUX you use?
Thank u! Chipquik SMD291 in most cases
!!It looks very good flux
Too bad we can not get in Israel ..
Thank you Champ
Why dont have video about fix touch iphone 6s?
iphone 6s full short this solution??? no water damage
How much is a backlight repair? Average?
good work here
where i can find those files that shows electric connections in the motheroard its a software or something ?
Adrian Zymeri You have to wait for one to fall off the back of a truck in china.
I try to use mainly PDF files that are leaked out all over the place. But for the connections your talking about - www.zxwtools.com. Easier to purchase through amazon.com though.
LOL @ Erik - Very true indeed.
btw good job there and thank you for sharing your skills with us
Good man
genius man
I have seen people using the UV Glue, you think that will survive ultrasonic cleaner.
It don't seem hard. Is it a place I can send it and you can fix it and send it back.
OMG 😯 he makes a really good job !, 😉
FRIEND GOOD AFTERNOON I WOULD LIKE TO KNOW WHERE I CAN GET THOSE DIAGRAMS, PILLS, OR SCHEMATIC ... IN REALITY I DO NOT KNOW HIS TRUE NAME! BUT I WOULD LIKE TO HAVE THEM AS I HAVE A IPHONE 6S AND DAMAGE A TRACKS OF THE IC U4020 ME COULD HELP?
nice video, how can i contact you? i have that exact problem.
hey i have 6 plus the touch works for some time then stops working
then starts working again after a period
yes this my phone same probulm
I have the AmScope SM-4TPZ Professional Trinocular Stereo Zoom Microscope. What size power lens are you using? I purchased two 0.5X lens and they still don't magnify enough to give me much working room as I see in your video. Can you tell me what power lens you are using? I have about 3 inches of working space between the bottom of the lens to the board. I am just learning this and love watching your videos and recently purchased all the stuff needed. Thanks
Chabasco Looney I have the same scope and a 0.5x lens. The scope has an adjustable zoom feature. I can get a wide range of FOV and zoom out of it and that's with the boom stand at the lowest possible setting and the optical assembly as low as it will go on the focal distance rail.
I can't zoom in all the way of course but I can get pretty darn close. Close enough to do trace repair on flex cables.
iphone 5s on off problem this solution ???
iphone 6s plus no display this solution???
Greetings from chile master
What is computer program name?
Use plastic pry tools, file down as needed
iphone 6 plus no display????
liked love your vids dude!
Thanks man! =)
lol.....I'm gonna do the same thing here watch this.....that comment actually made me really lol
hi apology I can rescue some filter that is of another model since mine is also made coal
With the wire you are using, that "fuse" probably wasn't required. FL4291 is rated at 350mA, which would require about a 26 AWG jumper wire - which is way too big for this repair. Looks to me that the wire you used was near 36 AWG which is only rated for 35mA. - Here's a link to a wire size / amperage chart: diyaudioprojects.com/Technical/American-Wire-Gauge/
Omg you are using a metal tool jk 😂😂😂
dear sir iam gone start my new microsoldering repair business can u gave me a good name for my business?
Suction cup for sure
I sure wouldn't use a metal tool. I personally use my fingernail to open most modern iPhone screens.
Hi sir
yeah, bro you are doing a great job, but bro can you give me the full name of your microscope
I wish I could work for u
Ibrahim kayani .. he don't likes muslim
LMAO
Tool waving. lol