Turning A New Segmented Blank
Вставка
- Опубліковано 29 вер 2024
- Instagram: @RJBWoodturner E-Mail: RJBWoodturner@yahoo.com
Be sure to check out my second channel: WhatchaDoinBob, it’s a VLOG about what I’m doing at any given time.
/ whatchadoinbob
Preparing Acrylic Blanks for Turning: • Preparing Acrylic Blan...
Preparing Wood Blanks for Turning: • Preparing Wood Blanks ...
Below are links to the tools I used in this video, or similar tools that will perform the same job. “As an Amazon Associate, I earn from qualifying purchases.”
Blank Prep:
Rikon 10” Bandsaw - amzn.to/3eOULP8 (Craftsman not available)
Blank Cutting Jig - www.turnerswar... (Search for Blank Cutting Jig.)
Blank Centering Jig - amzn.to/2S4fC7r
Drill Press - amzn.to/3cUrwJl
Drill Vise - amzn.to/34Yv4aC
Pen Tube Insertion Tool - amzn.to/3bLeGfW Play Doh - amzn.to/2xTUw4V
Epoxy - amzn.to/2VOaTYI
Craft Sticks - amzn.to/2KrrHQ5
Barrel Trimmer - amzn.to/36nUQpb
9” Delta Disk Sander - amzn.to/2yINGiA (Craftsman was not available)
9” x 150 grit replacement sandpaper disks - amzn.to/2Y1U0fO
Abrasive Disk Cleaner - amzn.to/3D3HtLX
Rafter Square - amzn.to/2Xo4bcy
2” C-Clamp - amzn.to/3aBstoj
Sanding Jig - www.turnerswar... (Search for Sanding Jig)
Jewelers File - amzn.to/3bRN5Jp
3/8” Bottle Brushes - amzn.to/3eNOhjJ
Turning Accessories:
#1 MT 60 Degree Drive Center -
#2 MT 60 Degree Drive Center - amzn.to/2TmpUzB
#160 MT Degree Live Center - amzn.to/38U6Sqs
#2 MT 60 Degree Live Center - amzn.to/36F27Qg
#1 Mandrel Saver - amzn.to/2Tu6LfZ
#2 Mandrel Saver - amzn.to/2XiEdYb
Tools:
¾” Roughing Gouge - amzn.to/2uGkpDM
¾” Skew - amzn.to/35ozkSV
1/8” Parting Tool - amzn.to/37H3W09
Detail Gouge - amzn.to/37Gmz4o
Chucks:
#1 MT Jacobs Chuck - amzn.to/38oxhfL
#2 MT Jacobs Chuck - amzn.to/38rwDOU
Collet Chuck Set - amzn.to/37e6gf0
Collet for 3/4” Stock (Not Included in set with chuck) - amzn.to/2RAikAv
26 piece set of E-32 Spring Collets - amzn.to/39GYI5K
Nova Chuck - amzn.to/2W3v1YG
Nova Mini Jaw Set - amzn.to/2vVzNN8
Bits Taps & Dies Starter Bits - amzn.to/36blqjN
27/64” Drill Bit - amzn.to/2VxDBOX
Drill Bit Set - amzn.to/3apKt6d
M10 x 1 Die - amzn.to/33cd7EG
M10 x 1 Tap - amzn.to/33670S6
M13 x .8 Die - M13 x .8 Tap - Tap & Die Set - amzn.to/38oxFLf
#1 MT - Tap & Die Tool Holder - amzn.to/3awtFtY
#2 MT Tap & Die Tool Holder - amzn.to/2NJu4zK
Sharpening: Rikon Slow Speed Grinder - amzn.to/2TIq2LR
200 Grit CBN Wheel - www.woodturnerswonders.com (Call For Proper Fit: (678) 400-8181)
Wolverine Sharpening System - amzn.to/2xMPZBp
Dust Collection: Dust Deputy - amzn.to/3cdxOUF
Dust Right Lathe Dust Collection - amzn.to/2Pvd2pW
Craftsman 16 Gallon Shop Vac - amzn.to/2T6Nz8w
Finishing:
Turning Sandpaper - amzn.to/2RziHLP
100 Grit Sandpaper - amzn.to/2zm5twl
Zona Paper - www.turnerswar... (Search for Zona)
Non-Stick Bushings - amzn.to/392M5l4
Penn State Thin C/A Glue PKCAFIN www.pennstateind.com
Starbond Aerosol Activator - amzn.to/3832Fjr
Starbond Medium C/A Glue - amzn.to/2T5zMif
Micro Mesh Pads - amzn.to/2GFigKU
Renaissance Wax - amzn.to/2I3Zb5O
Buffing Wheels - amzn.to/2teAz6D
Milescraft Pen Press - amzn.to/32zjn8Z
Metal Lathe:
0000 Steel Wool - amzn.to/30Mr9M0
½” Aluminum Rod - amzn.to/3at0Ej1
1/2” HDPE Rod - amzn.to/30EyTiU
Mineral Oil - amzn.to/2v7NQ1A
Brushes for Mineral Oil - amzn.to/2TCREl0
Digital Calipers - amzn.to/2NLuJ3t
HSS Cutting Steel - amzn.to/2RBM8Nm
HSS Parting Blade - amzn.to/3auoIC8
Punch Tool - amzn.to/2XXClpD
Metal Marking Tool - amzn.to/37o7Gnr
Other:
#1 MT Taper Mate Morse Taper Cleaner - www.woodturnerscatalog.com
#2 MT Taper Mate Morse Taper Cleaner - www.woodturnerscatalog.com
7/16” Wrench - amzn.to/3ePikr6
Acetone - amzn.to/2yovew5
Nitrile Gloves - amzn.to/2TIpNjV
Parker Ink Refill (Black) - amzn.to/2REsVux
Parker Ink Refill (Blue) - amzn.to/2TFsLp4
Parker Refills with Springs (Black) - amzn.to/319RW4O
Thin Rip Jig for Table Saw and Router Table: amzn.to/2wl3WFU
Pen Disassembly Soft Grip Pliers - amzn.to/32wWeUG
...very cool looking blank...and it made a great looking pen!...👍
Thank you.
Regards,
Bob
It looks great. The thing you said about making the stripes thinner will look great. How about out thick like they are then the next ones in a bit thinner? Ideas.
Thank you Rob,
I agree, the design ideas are endless. You’ll see more of these from me.
Regards,
Bob
Great looking pen Bob! Always excited to see your new blank designs. Happy Thanksgiving to you and your family.
Thank you Kevin.
Happy Thanksgiving.
Regards,
Bob
Can I ask what kind of glue did you use to glue up the blank?
Titebond 2.
Regards,
Bob
Before you get too down on yourself, I'm wondering if that is not just normal Aspen colorization?
Great pen Bob.
Thank you Bob.
Regards,
Bob
CAN I USE A PIECE OF ANTLER IF FILL THE MARROW WITH THIN CA GLUE????????
Yes, just be careful because you don’t want to breathe the antler dust.
Regards,
Bob
@@RJBWoodTurner THANK YOU I TURNED SOME TODAY AND MADE SURE I HAD A MAsk on and a face shield EVERYONE HAS BEEN SO HELPFUL AGAIN THANK YOU
Very nice.
Thank you Mark.
Regards,
Bob
Very pen Bob, you do some nice things. I love watching all the videos, Thank you. from the UK.
Thank you for watching Joseph.
Regards,
Bob
Great video, what is the name of that little brush you use to clean the tube?
Thank you,
There called 3/8” Bottle Brushes
Here’s a link to them on Amazon - amzn.to/3eNOhj
Regards,
Bob
Hi Bob I think your new blank turned out great 👍 I liked all the different colors of wood 🪵 you used.
Thank you Ray.
Regards,
Bob
the aspen looked like aged bone great job!!!!!!!!!!!!!!!!
Thank you Lawrence.
Regards,
Bob
I really like the discolored aspen lookes like bone or antler. Great turn as usual.🙂
Thank you.
Regards,
Bob
Beautiful
Thank you.
Regards,
Bob
Very nice Bob...🙂🙂
Thank you Pamela.
😃
Regards,
Bob
What is that tool called you used to shamfer the tube in this video
Hello Jeffrey,
It’s called a De-burring tool.
Regards,
Bob
Hey thanks for telling me about that tool I just ordered me one found on ebay
Experiment or not, this was a fun turn and you got a good looking pen from that blank.
Thank you Robert,
Yes it was. 😃
Regards,
Bob
I really admire your skills and pens
Thank you Manuel.
Regards,
Bob
Good looking pen. Great job Bob.
Thank you Paul.
Regards,
Bob
Looks nice Bob. IMHO if I had a very light colored wood in the blank, I would leave the Padauk out altogether. The light wood gives plenty of contrast. 😎❤👍
I agree, I need another accent wood.
Regards,
Bob
I've had that bleeding problem with paduak myself. Also with satinwood. It's really annoying.
The first time I did it the red shaded pretty evenly across a light maple section going from dark to light so I described it as a design element and everyone either thought I was very creative or was polite enough to pretend that they thought I was. SDE ( serendipitous design enhancement ) is a great thing.
LOL Randy,
That’s a great recovery. 😃
Regards,
Bob
Nice job, Bob. To help keep the padauk from bleeding, perhaps a bit of credit card stock/guitar pick or some other plastic spacers between the segments would help as well as add a bit more interest.
Nice idea John,
Thank you.
Regards,
Bob
Another video of Bobby B killin' it w/the pen making.
Thank you Joshua.
Regards,
Bob
VERY NICE!
Thank you Susan.
Regards,
Bob
i hope to one day own one of your pens. for me, attention to detail is what makes your pens stand apart from 99% of the market.
Thank you.
I may be auctioning some more of them off in the near future. Video pens.
Regards,
Bob
Realy nice done these blanks, love the colourcombination and the finish you do is execellent.
Best regards
Hans Olav
Thank you Hans.
Regards,
Bob
Another great job Bob. Very nice! Thanks
Thank you Roger.
Regards,
Bob
The blank (and pen) looks great! I just did my first segmented pen, similar to yours but only one thick segment and more of an angle. Do you sell these blanks?
Thank you Ted,
I do sell them. I currently have 8 available. They are $15 each with a flat rate of $5 shipping in the US regardless of the number of blanks you buy.
Regards,
Bob
@@RJBWoodTurner Thanks, Bob. I'm sending you an email. :)
Oops, no email on your about page. How do I contact you? I want 2 of them. thanks
@@tedspens Ok
Great end result Bob!👍👍👍👍👍👍👍👍👍👍👍😎😎😎😎
Thank you Alan.
Regards,
Bob
Blank and pen is absolutely beautiful bob
Thank you Harold.
Regards,
Bob
Bom dia tudo bem com você amigo por favor de uma olhada no meu canal Luiz Palheta eu gosto muito de ver o seu canal palheta de Belém Pará Brasil
Thank you Luiz.
Regards,
Bob
Subscribed.
That is a very pretty blank and pen.
Thank you Glenn
Regards,
Bob
Great looking pen!
Thank you George.
Regards,
Bob
Great blank and end result Bob.
I have made similar blanks and used Paduk as well.
It has a gorgeous colour but is so frustrating when the sanding dust bleeds into a lighter wood. I also put one coat of thin CA before sanding.
Great video Bob.
Take care.
Cheers, Huw
Thank you Huw.
I need a different accent wood.
Regards,
Bob
@@RJBWoodTurner How about Purple Heart?
@@RJBWoodTurner Osage Orange works really well as well Bob.
@@WoodenItBeNice I have a bunch of Osage.
@@WoodenItBeNice I need to pick up some more Purple Heart. I couldn’t find any the other day.