Janet Vance He did, he really actually did, he put the chain on backwards, a feat, I thought, would have been impossible! I think he got onto it though, between clips, as you’ll notice how well it cut after his initial start up cut.
Those saws were vibration happy! He never used any Loctite that I could see. Stihl used a case press to separate the cases b/c of the fragility of the design. Realise he didn't have access to such tools so he did the best he could do. I'm surprised he didn't break somethin' using that hammer.
Yeah I have 5 041 saws that all had case parts broken from fasteners rattling loose and the operator horsing on the saw with missing fasteners. Both common problems on Stihls of this vintage.
Correct me if I’m wrong but after filling the chain oil tank the gas he put in looked like regular gas judging by the color. The chain saw is a 2 cycle with gas oil mix usually bluish green in color
this could have been staged.Not to say that somebody was working up in those woods with the saw and It’s seized up on them and they got mad at it and just tossed it at the tree. And forgot about it But yes definitely could’ve been staged
@@Ellenslife851 The teardown shows a well used saw and probably did die. Any repairs would be costly so they dumped it. It seems a lot gets dumped on the wayside over there.
It's surprising that the original piston rings still gave the engine that much compression after the piston was jammed up in the cylinder unless they were replaced with new rings without anyone seeing that they were taken out of the box - the chainsaw actually cuts very well. It appears that the muffler wasn't painted on the build,it would be a good idea if it was painted with that high temperature exhaust or Barbecue grill paint to protect it from the outside elements a bit more !
This guy will make thousands of dollars on this video for a half assed "restoration" He basically just took it apart and cleaned it and put it back together and gave it a Krylon paint job a toddler could do. But he's about to get paid so I guess props to him.
When removing bar studs you can put a double nut on it and tighten them together and then use a wrench as to not damage the threads and denting metal if your vice grips slip...
I read comments and you're The Restorator. You're going to respond to me with your now famous quote 'Thank bro!". Do it. It will free up my mind. Take me a little higher.
I was thinking the same thing lol I might have came across one or two of those items in my life but nowhere near as often as he does. I love the acting scene of him looking up in the tree like he knew something was going to be found.
Сальники и подшипники железным молотком в крышки не забивают, а запрессовывают, в тисках. При этом обязательно, чтобы посадочные места были чистые. Одна песчинка может всё испортить.
Great work even though it is an obvious set up, but please wear some gloves while using the mysterious liquid and things, whatever it is it cannot be good for your hands surely !
looks like he sprayed wet flower on it and other things to make it look like its been sitting in the woods for years i live in a chainsaw world here were everybody burns wood for heat and i never heard of someone finding a saw in the woods
It's amazing that it was able to cut that well with the chain on backwards.
Cuts pretty good for having the chain on backwards 😂
Thank Bro!
@@therestorator7215
Hi
I have a question
Do you replace the carburetor on it or just rebuild that one ?
@@therestorator7215 ๕
@@therestorator7215 qoruueuuwrutotretutureueturotutuutrtyuturwturruyuretututurteruyuteruuuruyiyuuutuuettuyruryutturruutuutuuuewuoqqyueouyroertuiurryeeueueyyueuetwyueeruetueeueuwouyyuoyyeytueueruyeuetueutteuyuuuyeuoueeryoutueuyuyuyeyueeururteeoeuueyeterterut
Salam Lebaran ANTV 2017
Kesucian Global Selama TVONE 2017
I love that he expects us to believe he finds this stuff
Thank Bro!
#spesialiduladha
#adzansubuhantv2015
#RCTI
Proces clean is good.....i like it....nice dirty and rusty 👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Thank you sir for sharing your skilled how to restored chain saw👍
menarik sekali .ditunggu video selanjutnya
What a crazy place to find a chainsaw, oh and you were ALSO recording?! Wow!
It’s amazing! That chainsaw started at first shot!
1:26 i like the way you placed the chainsaw on the green leaves 😉 😎 👌
I don't care if he "finds" this stuff in the woods or not. It's just entertaining to watch, regardless.
Clear fuel, never had to replace a single part, didn't even have to tune the carb and had the chain on backwards. Im impressed.
Thank Bro!
RCTI
22
2017
23
2018
Great restoration!!! Those 52's are beasts don't sell her!!!
Btw please turn your chain around you will love how much better it cuts.
Janet Vance He did, he really actually did, he put the chain on backwards, a feat, I thought, would have been impossible! I think he got onto it though, between clips, as you’ll notice how well it cut after his initial start up cut.
Amazing👍👍👍 tanks for much😉 From Russia🇷🇺 like
awesome job loved the video
good very much
Great job! 认真的工作，没有多余的话语，成品很不错！ LIKE
Im From Turkey.. Very nicee very nicee.. God job
Молодец, золотые руки 👍
Fejjjjkkkkk no
KOMPAS TV
Zuma
Deluxe
Can't believe someone left that chainsaw in the woods I am glad you find it to bring back to life
super tare
Those saws were vibration happy! He never used any Loctite that I could see. Stihl used a case press to separate the cases b/c of the fragility of the design. Realise he didn't have access to such tools so he did the best he could do. I'm surprised he didn't break somethin' using that hammer.
Thank bro!
Yeah I have 5 041 saws that all had case parts broken from fasteners rattling loose and the operator horsing on the saw with missing fasteners. Both common problems on Stihls of this vintage.
Very cool clip!! Way to go getting that saw up and running!
Enough of the idea that you're just finding chainsaws laying around like easter eggs.
Thank Bro!
Yeah I never understand that. It's a restoration video, not an episode of Pokemon....
Correct me if I’m wrong but after filling the chain oil tank the gas he put in looked like regular gas judging by the color. The chain saw is a 2 cycle with gas oil mix usually bluish green in color
agreeed! also the chain oil looked like old motor oil.
Stihl hp ultra 2 cycle oil leaves the gas it's regular color. So always write on ur 2 cycle cans so u know which is which.
that was amazing
Я тоже так могу только разобрать 😂 а собрать половина деталей будет лишними 😁
Finally a restore that I can enjoy. Hard to believe someone left a Stihl saw out there. Regardless, its always worth saving even for parts.
Probably found it in a building and set it up there
this could have been staged.Not to say that somebody was working up in those woods with the saw and It’s seized up on them and they got mad at it and just tossed it at the tree. And forgot about it But yes definitely could’ve been staged
@@Ellenslife851 The teardown shows a well used saw and probably did die. Any repairs would be costly so they dumped it. It seems a lot gets dumped on the wayside over there.
Bill Reyna witch is surprising being a not so rich country
@@Ellenslife851 fuvodmgzi
Trabalho lindo perfeito parabéns.
ود
It's surprising that the original piston rings still gave the engine that much compression after the piston was jammed up in the cylinder unless they were replaced with new rings without anyone seeing that they were taken out of the box - the chainsaw actually cuts very well.
It appears that the muffler wasn't painted on the build,it would be a good idea if it was painted with that high temperature exhaust or Barbecue grill paint to protect it from the outside elements a bit more !
Nice silicon glue instead gasket glue...
AlsoMake a clutch cover template with cardboard and then mould an aluminum replacement in sand...
I have 17 acres and as many times as I try I never find anything left on my property. I guess people don't like me or something.
This guy will make thousands of dollars on this video for a half assed "restoration" He basically just took it apart and cleaned it and put it back together and gave it a Krylon paint job a toddler could do. But he's about to get paid so I guess props to him.
Thank Bro!
Greate 😀
Man, you have a metal skin.
Meus parabéns Mano
Air compressor and ultra sonic cleaner!
Thank bro!
Gracias Restorator por subir un video en el día de mi cumpleaños!. Jeje. 🇺🇾Saludos🇺🇾
Adóro esses episódios Aprendo muito tmj.
Thank bro!
RCTI JUNI 2019
CDDP TMTM
KOMPAS GRAMEDIA
JUNI 2016
MEI 2017
For someone with that much talent, why the chain backwards?
Looks like he flipped it around when he went to start it though.
A bait for people like you.
He's in the southern hemisphere
In Australia it's actually on right 😉
Talent??????? Did you see that paint job on this saw what the ****** no filler no putty old paint is sticking on aluminium and he panits over it
He got it all done and put the chain on backwards! @26:50.
When removing bar studs you can put a double nut on it and tighten them together and then use a wrench as to not damage the threads and denting metal if your vice grips slip...
NICE!
Mantap bang👍👍👍
Thank bro!
Your video never dispointed.One like from me.You deserve it.👍good job.
Thank bro!
👏🏻!!! 17:00 - engine fuel??? Clear! Very good project!
Добрый вечер я поздравляю вы сам делал бензопила. Умный. Опыт!
Ain’t no way he rebuilt the whole thing and didn’t put 2 stroke gas in it
Thank bro!
how you know that some oil got no color
@@AdrenalineRushMX nahh hahahah your funny buddy ",that saw is 16 to 1 per gallon of fuel
@@pioneerman8467 By the stihl archives it is 40 to 1.
Good job
Nice I like that
best! best!! best!!!!!!!!!
vintage stihl
How can Maine one be that good at taken apart and putting every piece back together where it goses. But dont put then chain on the right way!!!??
Good question. He must restore them but not use them.
I read comments and you're The Restorator. You're going to respond to me with your now famous quote 'Thank bro!". Do it. It will free up my mind. Take me a little higher.
Thanks Bro!
*And I go to the forest only to see mushrooms. And you have a hypermarket spot there
*
There is zero chance that saw would come a part that easy 😂😂
Hai fatto tutto bene metti la catena nel verso giusto come fa a tagliare complimenti bravo
Ну канечно он знал заранее где пила была и тут началась показуха 😁
He put the chain on back to front. :)
Thank Bro!
chain&piston on backwards, wrong colour for stihl and no logos saved, a shame of a restauration..... but you know, a man has to learn. keep it up
Please explain how you put a piston on backwards for some one that is not knowledgable in engine rebuilding.
where is this place where such good machines are thrown out?👍
Thank Bro!
Súper genial
buy it from scrapyard and put them anywhere they want for the welcome part of the clip
Я так понял они никогда не узнают что такое тепловое разширение и дальше будут забивали коленвалы и подшипники молотком и деревяхой
There good restorations, but I've never come across chainsaws, mowers, bikes, radios, laptops on my travels lol
I was thinking the same thing lol I might have came across one or two of those items in my life but nowhere near as often as he does. I love the acting scene of him looking up in the tree like he knew something was going to be found.
It doesn't mean anything if you heart every comment. I doubt you read them all if any.
Damn, i wish if i could find tools in forest like that XD
1:14 ObViOuSlY DaT WaS UnExPeCtEd 🤔
👍
Montou com o mesmo pistão e bom a corrente virada..mas parabéns
Randomly allways finds something to fix sitting in the bushes.
The bigest bullshit on youtube
@@grzybek141 pretty much.
If love to see you try to start it before restoring it to see what happens lol
you put the chain on backwards
Assisto todos seus videos muito bom (Brasil) ☺
#SELAMATNATALTAHUNBARU2013
It's funny how people know where to look in places, specially in bushes,
to find something that is going to be there for you to find.
Great 👍🏻👍🏻👍🏻👍🏻
An american lumberjack must have been in vacation cutting exotic wood when he forgot where he left his chainsaw
more likely his bones are spread around by wild animals......after he got shot by the restorer himself.
how many saws can one person find in the jungle im not falling for it. good RNR video though
Сальники и подшипники железным молотком в крышки не забивают, а запрессовывают, в тисках. При этом обязательно, чтобы посадочные места были чистые. Одна песчинка может всё испортить.
А ему все равно походу😂
Я аж прослезился, когда он коленвал молотком выбивал.
Top
у них в лесах чего только нет
А у нас хрен проволоки ржавой найдешь.:-))
Nice job,but why that young tree bro,could't you find anything else
Muy buena máquina Yo arme una parecida
Ramadhan
Can i ask why don't you use the clutch cover
Bo taka znalazł ?
Finds a monster sized chainsaw in a place where there are hardly any trees. Yes, I believe this could be true--NOT.
I wish I could find that
so how does it cut with chain put backwards? :)
same way it was found. magically!!
Ivica Črnčec a=
Wow
Damn 20 minutes you should fill out an application for stihl
jó a videó
Anyone who lets a chainsaw get into such a state should be smacked in the teeth. Well done on the restoration.👍🏻👍🏻👍🏻
Chainsaw my favirout video game...doom
Great work even though it is an obvious set up, but please wear some gloves while using the mysterious liquid and things, whatever it is it cannot be good for your hands surely !
Chainsaw "STIHL 051 AV ELECTRONIC"
I have an 041 AV super electronic about the same vintage!
Сколько времени она там лежала, век или два?
LIKE SOMEONE LEFT THAT RIGHT THERE AND HE HAPPENED TO FIND IT. NOT AT ALL LIKELY. HE PLANTED IT THERE AND FOR US TO SEE THAT HE FOUND IT.
44 ц
pretty sure the chain was put on backwards just fyi
What an amazing restoration, did all that but put the chain on backwards 🤦
ххххөлз
өщзөьөггогөоөөггг8гггггөощ9ооооооооошщ
Nooo he put straight gas in it
looks like he sprayed wet flower on it and other things to make it look like its been sitting in the woods for years i live in a chainsaw world here were everybody burns wood for heat and i never heard of someone finding a saw in the woods
Impressive I’d have called that saw junk and left it were it was at wouldn’t even have messed with it