This chainsaw worked well to cut up a pile of cedar logs ua-cam.com/users/postUgkxfQm1wmg0ItKDLavxj1nXtQY9HP7EF504 and stumps. I used it to cut 12"-16" diameter logs and a handful of odd-shaped stumps that were larger in diameter. There was more than enough power even when using 2x100' extension cords. Be sure to use the right gauge extension cord, since you should be using a slightly higher gauge cord than the standard extension cord most folks have around the house. My 2 favorite features of this saw over previous ones I've used are the built-in sharpener and the quick stop after the the throttle is released compared to a gas-powered chainsaw. As soon as you release the trigger, the chain stops spinning immediately because of the electric motor. Standard feature of most of these electric chainsaws, but worth mentioning here for anyone not familiar with it.Bottom line...I needed a chainsaw to get through some backyard cleanup of logs and tree stumps. For the price of renting a chainsaw for a few days, I got this Oregon chainsaw that got the work done, and now I own it for future use.
A beautifully done restoration. My only concern would be the colour. People won’t understand it. To me a restoration is always back to full factory specifications. So it could be placed in a museum perhaps. Deviating away from stock colour is always going to cause people some perplexity in the future. Anyway - it’s still a very nice bit of work!
A reconditioning for beauty or a professional chainsaw like this must first of all work perfectly. The criterion for which forest saws are in the same color is the following: they can be easily recognized in the forest. Black and white is easily lost in the forest.
very nice. i hope it will hold with time. there's a method to Dye all plastics and it suppose to hold better. give it a try its cheap and easy you will find it easy
As soon as that starts burning fuel in the cylinder the bottom end paint will flake and score the piston real bad . And when the rest of the paint flakes on the outside it will look even worse than before he started . Restoration I don't think so as no seals bearings or anything replaced
@@yone-channel Friend, is a mixture of 1:33 with husqvarna ls + oil for 372 xp 357 xp and 351 and scythe 545rx suitable? What's the best oil to fuel ratio?
I, know your are professional, so as I, but can you make a video that's can people watch and learn, slow not so fast like this. Don't show your secrets, make people confused.
Great work. Guy knows what he’s doing but my question is why so much work for a marginally professional saw? The return on all of these parts and labor won’t pay off imho. I’ve done several but only on coveted saws like the old 288xp’s. But I’m not knocking this guys work for sure
Согласен, даже высоковольтный провод не поменян. Вместо щупа- бумажка, масляный насос не проверил, шину и то не выправлял. Дрочево да и только. А что на коленвал смотреть, он, когда маховик снимал, по нему молотком ебанул.
Ez csak optikai tuning volt Norbi! Látványos ugyan, de nekem a láncfűrészes feeling kicsit hiányzott belőle. Semmi mechanikai újítás, dugattyú, vagy csapágy csere, stb.. A vágástesztről nem is beszélve... A csávó egy valódi fotelfűrészes fazon, fingja sincs a gépről...
A beautifully done restoration. My only concern would be the colour. People won’t understand it. To me a restoration is always back to full factory specifications. So it could be placed in a museum perhaps. Deviating away from stock colour is always going to cause people some perplexity in the future. Anyway - it’s still a very nice bit of work!
Thanks for posting this and taking the time to do the restoration and video work! Mesmerizing. 👍
This chainsaw worked well to cut up a pile of cedar logs ua-cam.com/users/postUgkxfQm1wmg0ItKDLavxj1nXtQY9HP7EF504 and stumps. I used it to cut 12"-16" diameter logs and a handful of odd-shaped stumps that were larger in diameter. There was more than enough power even when using 2x100' extension cords. Be sure to use the right gauge extension cord, since you should be using a slightly higher gauge cord than the standard extension cord most folks have around the house. My 2 favorite features of this saw over previous ones I've used are the built-in sharpener and the quick stop after the the throttle is released compared to a gas-powered chainsaw. As soon as you release the trigger, the chain stops spinning immediately because of the electric motor. Standard feature of most of these electric chainsaws, but worth mentioning here for anyone not familiar with it.Bottom line...I needed a chainsaw to get through some backyard cleanup of logs and tree stumps. For the price of renting a chainsaw for a few days, I got this Oregon chainsaw that got the work done, and now I own it for future use.
すばらしい。インドのレストレイションに歯がゆい思いをしていたんだ。日本でもやる人が居て助かった｡
A beautifully done restoration.
My only concern would be the colour. People won’t understand it.
To me a restoration is always back to full factory specifications. So it could be placed in a museum perhaps.
Deviating away from stock colour is always going to cause people some perplexity in the future.
Anyway - it’s still a very nice bit of work!
お疲れ様です。
いつも感心しながら動画を観させて頂いています。
本当に器用なんですね！素晴らしいです。
BKのハスク最高ですね。
カッコいいです。マネしたくても絶対無理です。
また為になる動画作って下さいね！よろしくお願いします。
Nice! I do enjoy knowing the in and outs. Very inspiring and enlightening. Very much appreciated 👍
チェーンソーも定番のオレンジ以外のカラーがあってもいいと思います。ヘルメットからチャップスまでオレンジじゃなくても（笑）安全確保上なんでしょうけど。
De aaa mm.(*_*)De mi
あっという間の26分でした！
バーの鏡面処理とか、最初「なんでだろ？」と思いましたが、そこまでやるとは！
頭が下がります。
ハスクのシール、欲しくなりました笑
Svaka čast,bravo i ja radim ovakve stvari.
超カッコいい‼️
What a restoration!!!!
Is the crankcase made of aluminum alloy or plastic as well?How come it doesn't melt when the saw is operating at high temp?Nice restoration sir👌
aluminum crank case, but some small saws do use plastic the bottom end shouldnt get that hot constant cool air flow from intake
Nice job!
I hope the fuel doesn't strip the new paint off it!
This is the reason why 2K paints are used.
Well done Amazing technician
Bravo 👏👏👏👏👏
Vraiment super résultat
👍👍👍💪💪💪💪
346xpは名機ですな
Where did you get those extra large dogs
A reconditioning for beauty or a professional chainsaw like this must first of all work perfectly.
The criterion for which forest saws are in the same color is the following: they can be easily recognized in the forest. Black and white is easily lost in the forest.
Thats the fastest tear down i have ever seen
It's an honour🙌🏻
good job but where is starting machine episode ? is it alive?
デザイン、上手ですね。
very nice. i hope it will hold with time. there's a method to Dye all plastics and it suppose to hold better. give it a try its cheap and easy you will find it easy
Rit dye, of course 🙋
Prodak2 Jerman slalu awet muda dan ganteng lagi...
steady my brother.
success always bro.
greetings from your new friends chainsaw channel from INDONESIA.
Let's have a coffee at my shop...
As soon as that starts burning fuel in the cylinder the bottom end paint will flake and score the piston real bad . And when the rest of the paint flakes on the outside it will look even worse than before he started . Restoration I don't think so as no seals bearings or anything replaced
Wow, nice job😊
カッコいいですけど
山で使うなら目立つ色が1番です。
Arata perfect drujba 👍👍👍
Luar biasa anda sangat kreatif. Indonesia🇲🇨 nyimak
wonderful job.
Ich liebe das,Lego für Fortgeschrittene.😊
Good job 👍
Gooooood works👍👍👍
Sugoi!!!!!!! Nice work!!!!!!
Amazing color
Hola saludos desde Panama 👍👍🇵🇦🇵🇦
Husqvarna👍👍
❤
Mahal ,tapi mesin nya awet muda utk 50 taun...contoh mobil viat dan jeep
Piękna 😍💪
Gửi sang Việt Nam cho mình 1 máy 🤣🤣🤣
Does it run tho
Really like it
Many many Congratulations
Molto interessante soprattutto per chi come me piace e ne possiede 2 di motoseghe.
Oke n keren ...gua suka....
Wow nice
Better as in the new age🤩
where did you buy the stickers. I want these too
Please answer... Its very important for me...
Its made by myself with Roland cutting machine ;)
@@yone-channel Friend, is a mixture of 1:33 with husqvarna ls + oil for 372 xp 357 xp and 351 and scythe 545rx suitable? What's the best oil to fuel ratio?
@@yone-channel could you send me the same once?
Could of saved me 5 minutes of u taping by just stripping it all way down
Nice!😎
How much and how to order
Sorry🙇♂️
Nice
YOU KILLED HUSQVARNA's BEAUTIFUL ORANGE COLOR :(((((
Luar biasa keren bos kuu
I, know your are professional, so as I, but can you make a video that's can people watch and learn, slow not so fast like this. Don't show your secrets, make people confused.
so cool
Great work. Guy knows what he’s doing but my question is why so much work for a marginally professional saw? The return on all of these parts and labor won’t pay off imho. I’ve done several but only on coveted saws like the old 288xp’s. But I’m not knocking this guys work for sure
Thợ cực giỏi bái phục.
For sale??
No🙇♂️
👍👍👍
Prawie jak nowa szkoda że tego modelu nie ma
Oke n Thank you Boss...
Love! Brutal!
👍💯
👍
Bella fatta bene 👍
и где тут реставрация??????????даже коленвал не посмотрел....поршень,кольца,зазоры......
Согласен, даже высоковольтный провод не поменян. Вместо щупа- бумажка, масляный насос не проверил, шину и то не выправлял. Дрочево да и только.
А что на коленвал смотреть, он, когда маховик снимал, по нему молотком ебанул.
😊😊
pretty but really?
Today on cardboard 101 we make a fucking chainsaw
Będzie paskudnie wyglądać jak się poobciera, jak chińska podróbka ;)
I like
А завести?
Вам не кажется что одиот!?
Wow 👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻
bide çalıştırsaydın daha güzel olurdu
ｻｸｻｸｻｸｻｸｻｸｻｸｻｸｻｸ
Браво
It looked better as orange. And you could have fixed that dent in the exhaust
Hi Goog job .
And good videó. 🤝👍✌ subscribe.👍
Ez csak optikai tuning volt Norbi! Látványos ugyan, de nekem a láncfűrészes feeling kicsit hiányzott belőle. Semmi mechanikai újítás, dugattyú, vagy csapágy csere, stb.. A vágástesztről nem is beszélve... A csávó egy valódi fotelfűrészes fazon, fingja sincs a gépről...
@@DrujbaInc Szia Papi teljes mértékben igazad van ez csak optikai tuning.
Adevărată artă ....o nouă viață pentru 346 . felicitări !
@@ioneldragan968 🤣🤣🤣🤣🤣🤣🤣
Ten model był nie zawodny
I have Stihl 880 more better Than Husquarna
Chỉ 1 vòng sát mang 3ngày là chết
😀👍👍👍👍👍
346xp 353
Better then 353
👍👍👍👍👍👍🤝🤝🤝🤝💯💯💯💯
👍👍🇧🇷✌
Without reading anything, I thought that thumbnail was a caor crash into a post. 🤷
❤❤👍👍👍🤝🤝
🙋👏🇷🇴
I give u my 5husq u restauration me i give u moeny for job :)
Čkž
👍👎🤮
A beautifully done restoration.
My only concern would be the colour. People won’t understand it.
To me a restoration is always back to full factory specifications. So it could be placed in a museum perhaps.
Deviating away from stock colour is always going to cause people some perplexity in the future.
Anyway - it’s still a very nice bit of work!