Це відео не доступне.
Перепрошуємо.
Restoration Old Gasoline Chainsaw STIHL // Restoring 2 Stroke Petrl Chainsaw
Вставка
- Опубліковано 27 лют 2022
- Restoration Old Gasoline Chainsaw STIHL // Restoring 2 Stroke Petrol Chainsaw
#restorationsskills , #restoration , #restore , #restoring , @restorations skills
#RestorationOldGasolineChainsawSTIHL,
#Restoring2StrokePetrolChainsaw,
Welcome to my channel of Restorations Skills. In this video we receive a hydraulic jack that my friend uses to lift and repair cars. They have not been used for many years, so they rust and accumulate a lot of dirt on the surface. We restored and refurbished it and it's finally back up and running. I hope you find something useful from this video! I am very happy to receive your feedback, advice and suggestions to improve myself more and more!!! I apologize for the mistake if I did in this restore!!! Thanks for watching and supporting me. Thanks very much!!!
Ну теперь поставь на полочку, потому что эта пила больше никогда не запустится =)
It will start again
Why not start?
You put the chain on backwards. You painted the air filter. You didn’t lubricate the pilot bearing with grease, that should have been replaced and you didn’t put any bar and chain oil in machine.
Also, needs 2-stroke oil applied to piston, rings, cylinder, crankshaft, bearings, etc. during installation.
what happened to chain brake missing should have replaced,does it even run
This was a waste of time
Amateur mechanic.
Where do I begin.
Для особо упоротых "РЕСТАВРАЦИЯ" - это комплекс мероприятий, направленный на предотвращение последующих разрушений и достижение оптимальных условий продолжительного сохранения памятников...И полотен картин." Ремонт"- комплекс мероприятий по восстановлению работоспособного или исправного состояния какого-либо объекта и/или восстановлению его ресурса. Тут ни то и не другое.Фильтр и коленвал покрасить умудрился, залить ослиную мочу в бак просто лайк
ещё и цепь наоборот поставил
Умник с интернета только читать можешь
Я занимаюсь ремонтом бензопил. Всё что он сделал редкостная хуита. @@The_RealSett1011
Nice way to clean a saw I guess and looks very nice all said and done. However, aside from the obvious chain being on backwards, chain brake missing/not added, chain Tensioner missing, and paint on the air filter. It would seem they made so many more mistakes I can't even count them all, especially putting paint on the Crankshaft. Who knows if the case bearings are any good, (love how they hammered the case together, couldn't have thought about that myself) but I digress, the clutch cage bearing needs to be replaced and they put the bar studs on backwards. Not to mention if the Carburetor is any good. But all-in-all they " kinda " know how to take a saw apart and put something together. Nice try👍
my thoughts exactly, I was horrified watching a lot of this lol
I suppose video made in India 😂
And to top it off, leaving us hanging without seeing it run!
I wanted to see it spit paint😂
At least the saw was safe from catching Covid….
They probably could have just serviced the carb and started this saw right up. Instead they took everything except the carb apart. What a waste of time.
I'm glad to see so many of you noticed that he installed the chain on backwards, but that is the LEAST of his worries. It's a shame to ruin such a great saw.
Exactly.
This would be a newer updated version of an 038?
Yes this saw is 2010 to current day
@@brockschaner2861 They don't sell this saw in North America unfortunately
bro fr
Ёмана! Пойду у себя по огороду пройдусь, может и мне повезёт что-нибудь найти полезное
I was running this saw for about 2 hours at about a 30-50% duty cycle ua-cam.com/users/postUgkxfQm1wmg0ItKDLavxj1nXtQY9HP7EF504 and it did a great job. I used the lever for the built in sharpener to clear chip buildup out more than to actually sharpen the chain. It managed to cut some hardwood stumps much larger than it's size without bothering the neighbors with hours of 2 stroke noise.
Cool how you pulled the starter multiple times with the switch clearly in the off position to show us that it can not operate when the switch is in the off position thank you really much I appreciate it 👍🏼👍🏼👍🏼
Just maybe he was testing to see if the engine was seized
😂😂 he done that cos he knows it won’t start anyway 😅
Цыганская реставрация 😁
Главное выглядит свежо и пох на остальное👍
ага хоть бы сальники для приличия поменял
Так ещё и не завёл в конце. Мелкий мошенник
10/10
Sip okkkkk nusa tenggara timur indonesia. subcriber
Nice and clean looking. Probably does not run. Would be best displayed on a shelf.
Since you painted the air filter and the crankcase you should have just painted the Piston too lol
Restorations Skills ?? OMG😱😱😱😱😱😱
Hilarious, I want to send him my 064
bravissimo,un genio.
Painted the air filter,,,,,,Smmoooooth.
😂🤣😂🤣😂🤣😂🤣 цепь задом наперёд - это шедевр!!!! Да там столько косяков, что работать она будет недолго, если вообще заведётся.
Did anyone noticed he's got the chain going the wrong way
I didn't! But I noticed that he is not using it. So, it doesn't matter.
i love stihl!
I am Happy To Receive Your Feedbacks, advices, Suggestions To Improve Myself Better. I really appreciate it! Thank You Very Much!!!
I love how he never starts it up to show it can "Actually" work now lol
I thought the same thing. I wanted to see him start it up. I want to know if it actually runs. Great cleanup - but I need to see was it worth while. What good is it to have a clean saw and it doesn't it run. I have a Stihl Saw to rip wood -not look pretty.
you painted the air filter???? slaps forehead
Osm bro only two mistakes 1chainbrake ànd 2chain on backward fittted
Did you sand plastics so primer and paint will adhere? Compression test? Leak down test? Clean carburetor? Replace crankshaft seals? The MS 381 is the newer version of the MS 380, so really not that old. All that work and you didn't even fire it up on camera. I know Stihl products and this is a solid saw.
And the Chain goes backwards
And where is the Chainbrake
Looked better before, these old things just need a full tear down and clean/rebuild. It will be peeling paint forever now and won’t even start. 😂😂 this is hilarious man so rough as guts. 😅😅 can u do a video of trying to start 😂
No llamaría restauración a esto, ya que un verdadero TRABAJO DE RESTAURACION implica ponerle mucho esmero y dedicación a lo que uno hace
THANKS !!!! BEAUTIFUL JOB !!!!!!!! JESUS CHRIST IS LORD !!!!!!! AMEN !!!!!!!!
Felisidades
mantap hadir nyimak lur
Thank you very much. Please follow and support us!
диву дивлюсь всегда )) разобрал.помыл. собрал.))готово)))!!!ЧУДЕСА!!!
Wow beutifull chainsaw
Guut amajiing❤
Muy buena restauración , pero no la arrancaste pibe !!
🇹🇷yes okey makina şimdi oldu.🇹🇷
The chain is on backwards other than that great restoration
Όό κλικ
..
That was painful to watch. Struggled with the fuel cap, didn't change any bearings or seals, painted the fucking air filter for Christ's sake. Yeah made it look pretty but damn it
Maybe he thought when the bar was upside down the chain was wrong.. hahahahah
How do we know it ran ???
He didn’t even start it up
You are kidding, right? A little part of me died when I watched the video.
Ustaya bak yola gel zinciride ters takmış
❤
Bạn đã lắp xích ngược
this is my first time I see crankshaft with paint..
Dang after watching him hammer the crankcase tougher I think I might have him work on my saw
Pouco uso dessa motosserra , nem o sabre perdeu a tinta.
Cool
👍👍👍 wow keren 👍👍
This is exactly why you don't buy any "REFURBISHED ENIGINE" items, unless you know for sure that the person who done the restoration/refurbishment is a professional at what they do...
Bruh, that heart is wrong right here
You painted the crank and the bearings crazy
Kren👍👍👍
I wouldn't have painted it, because even though it shows signs of age, I prefer the aspect of Originality!...In the end, we just had to make it work!....🤔......😄...
Eline sağlık
There’s very little better in life than seeing degreaser go to work on caked on oil and gunk love it 😍🔥
Was t degreaser it was fuel oil mix
Passiert mir auch laufend... Da geht man kurz in den Gemüsegarten, holt ne Gurke und n Kopfsalat und siehe da... Welch Zufall aber auch... Liegt da doch ne 044er Stihl im Garten rum zu gammeln. Hab ich die letzten 20 Jahre doch glatt übersehen...😂😂😂
Mantap kawan, salam 1 jari🇲🇨
Mate what are you doing to that saw... all you did was take it apart and wash it down, then reassemble without replacing anything, and with no lubrication on anything, and gasket sealer and paint where it shouldn't be. And the chains on backwards.
Goes to show, a fresh coat of paint makes things look impressive to people who don't know much about them
Yeah I stopped at the point I saw the cylinder being put back on without a torque wrench lol
Turn the chain:)))
Amatőr!
Выкрасить и выбросить👍
E a correntona ao contrário kkk top o vídeo.
17:10 - Извините, но позволю себе дать Вам совет на будущее: коленвал бензопилы с надетым подшипником не нужно забивать молотком в картер при сборке. Нужно взять строительный фен, нагреть им половину картера, в которую будет вставлять коленвал, чтобы отверстие в картере под подшипник увеличилось от нагрева в диаметре, и потом коленвал туда легко зайдет. А когда вы забиваете коленвал молотком, можно повредить посадочное место подшипника, и наружная обойма подшипника может начать проворачиваться в корпусе картера. А это приведет к последующему ремонту бензопилы, возможно даже к замене картера целиком.
I am very happy to receive your feedback, advice and suggestions to improve myself more and more!!! I apologize for the mistake if I did in this restore!!! Thanks for watching and supporting me. Thanks a lot!!!
да не напрягайся так сильно, он ее даже не завел в конце видео, да и покраска в сборе... и ФИЛЬТР покрасил! это пздц... а ты ему о таких высоких материях))) это не реставрация это гребаный макет и все это абы просмотры! правда я перематывал, и хорошо что так делал!)
Чел цепь задом наперёд поставил и глушак покрасил о чём ты))
Цепь не той стороной, игольчатый подшипник не заменил, глушак покрасил ? зачем Карл !!!!!ну и все вышесказанное.
@@user-pp2xm1rr7v я тоже смотрел на 2 скорости ))))
Коленвал покрашенный - это просто ноу-хай уууууххх
После за лития бензина в бак надо прикручивать выхлоп
(Логично)??!))
Нихао✌заведётся?
excelente erramienta de trabajo
You have to change that airfilter before you run it 😳
No, never turn it on.
Молодцы китайцы
Quedo al reves la cadena
Never started it...chain on backwards n never used the chain adjustment....good preparation n display
Soweit alles okay nur den Luftfilter zu lackieren 😂😂
Und dann die kette falschrum drauf
You need to practice on a Craftsman and leave good saws to the pros.
Engine cat . Good luck sir 🤲
I have one like in that video..its a solid and strong saw and dont ever paint that air filter..that would just restrict its air flow..😁💪🔥
nice video.Well it didn't run before and didn't run after,but it sure looks good.
素晴らしい!
完成後のソーチェーンの取り付け方が、逆でしたよー
just because you can, doesn't mean you should. 😮💨
STIHL 180 good chainsaw worked for 7 years
lol like how "restoring" my engines when i was 13 year old :P
Этот покрашенный воздушный фильтр...
Some parts only look dirty, probably still a brand spanking new chain saw
That poor saw was better off in that wood pile where it started from😢
Paint on the crankshaft? 😶
And painted the cylinder without covering the intake and exhaust and the spark plug hole
Itulah yang anaku ingin😊
23:52 Congratiolation. You successfully paint-sealed the airfilter...
I've just started watching this and the first thing that comes to mind is, since when has anybody thrown out a Stihl pro model chainsaw? They are always worth money for the parts alone and that saw isn't even super old. Not with that style of oil and gas caps. It also had good compression and likely just needed a little tlc to run like a beast.
Oh well back to the video, though I read some of the comments and so I'm not expecting a happy ending.
After seeing the video.
Well that was a huge bummer. I'm sure glad that wasn't my saw. Smh
Руки за такую "реставрацию" оторвать мало будет
This is the result of a "husqvarna" mechanic doing on "stihl" chainsaw. 🤣🤣
Great videos you have.
You didnt start the Chain Saw… I dont know if its Restored or not…😩
18:05 / 24:19 : yes VERY good job no 2 stroke oil used. Just put everything dry together and crush the rings into the cylinder without compressing them by hand or something...
Love stihl
2 saattir izliyorum çalışıp çalışmadığını göremedik
32:58 Tirando que a corrente foi montada para o lado errado tá show kkkkk
Stihl yetkilileri bu videodan sonra makinayı senden geri almaları gerekirdi.
Oh my gosh, pumps the throttle like a bit like a old carbed car, I can't hardly watch such a rookie,
Bos rantai pasang terbalik..hahaha
А вот цепь то надо другой стороной поставить
А зачем она все равно не заведется)
You half did the job
Te faltó intentar arrancarla 😂
🇹🇷emice zinciri ters taktın.usta.🇹🇷😂👊😂
Cuối cùng xích lắp ngược 🤣🤣🤣
Подшипник без иголок, ещё походит...😁
Эти полупокеры ещё цепь наоборот поставили…
That's not a restoration,but that just a clean the engine.
But that is a great 👍
Во дворе в капусте нашёл случайно ;)