06 Toyota Tundra Knock Sensor Replacement Pt. 1
Вставка
- Опубліковано 6 лис 2017
- Step by step to replace knock sensors on the block., I used all of the information from the pro-demand manual, but less steps are needed than stated, no need to drain any coolant, nor remove coolant lines. Please give me a like and thumbs up! And don't forget to subscribe!
- Авто та транспорт
A couple of notes for those undertaking this 1. The fuel injectors and fuel rail can come off with the intake 2. There is one bolt and one nut in behind the manifold holding the harness. The intake comes loose but will not come off with these in place.
Sweet jams bro 😎
I have #3 engine knock sensor out with no symptoms on my "08 with 188k. My brother's '10 had the same problem with only 40k on odometer, but slowly got the job done. The dealer wanted $850 without telling me only one sensor was out of 4 total. I got a wiring harness for $33.Sensors were $35 to $79 each. Mice problem also.
glad you got it figured out
great video
i appreciate you
Thanks for the vid. Very helpful
No problem At all
Hello, Do you know the Knock 1 sensor Location for a Toyota LC 1998? thank you
What exactly was it doing while driving? Did it effect going from park to drive like harshness? Did it not go in 4th or 5th or 6th gears?? My 08 has knock sensor issues but has the symptoms I just listed..
knock sensors did not affect the harshness, more on the lines of keeping the engine running on its low octane fuel map, (less spark advance safe but down on power,) and limiting throttle actuator position and fueling strategies. Basically in limp mode, the symptoms you are having I would like more detail ( how does it feel going from neutral to drive, harshness or smooth,). (Are you seeing any other codes?) if it is not shifting into higher gears or slipping when it goes into gear ( rpm rises quickly with no noticeable vehicle mph gain) you more than likely have a transmission that is low on fluid and or hurt. Also, you need to find out if your throttle pedal in-cab and throttle body actuator on the engine is functioning properly. if either of those act up it will cause shifting harshness. Make sure the intake to the engine that has the mass airflow sensor on it is connected properly with no air leaks after the mass air flow sensor.
great great video.. Just a quick question if someone may wanna help me out, is the location of the knock sensor on this 06 the same as in the previous editoins like 04 or 03, or as we call it, the white engine???
Jaber Mazzida give me the info on your truck and I will find out for you
do do do do do do do do {twighlight zone}. He starts on driver's side then moves to work on passenger side and nearing completion of those steps shows driver's side which reflects that hoses removed in the beginning are now not removed.