I have another approach. I put my choke tubes in dry and tighten them with a wrench with a firm hand tightening. This method will most always prevent the choke from working its way loose. But I also take the chokes out 2-3 time a year and thoroughly clean the threads on the tube and in the barrel. I remove all the built-up crud and carbon. I have found that this works better than oiling the threads. I believe that over time the oil dries up and mixes with the carbon forming a glue-like substance that will make the choke stick kin the barrel. But whatever you do, oil or no oil, take your choke out and clean all the threads a couple time a year and you will avoid problems.
Brand new Mossberg 940 tactical. They used blue locktite on the buffer tube retaining nut. I have a feeling they did the same on the choke tube. I believe I may have to give you a call...
Had to do this for a friend, luckily I was able to machine my own tools like you did. Exact same down to the map gas and the impact and if that’s a matco impact like it appears to be then we’re even down to the same brand of tools. Don’t do it for someone you don’t know, my buddy was ready to buy a new gun because a tube was stuck in his A5, so it was a “if it gets messed up or broken that’s fine” kinda thing
I have a rock island vr80 with no modifications I want to go out to shoot clays what is the size ammo that I can get that will not harm anything with this shotgun I have the modified choke in it now. Any help is appreciated thanks
Hello I have a 870 that has a modified turkey shoot barrel on it that has a slide in style choke that is seized up and won’t come out. Is this something you could help me out with…?
OSR , Can Change My 870 12 Ga. 28" Plain Barrel From Mod Choke to ( Lt-Mod /15 Thousands ) For Steel Shot Loads ? Need to Ship barrel in for work .. Thanks
This is a goud method. And I see it working on 99% of stuck tubes. But theres always one that is galled, that will destroy the barrel before it will turn...
BRB, going to go re-grease all my choke tube threads.
GREAT work!
I did too , lol
I have another approach. I put my choke tubes in dry and tighten them with a wrench with a firm hand tightening. This method will most always prevent the choke from working its way loose. But I also take the chokes out 2-3 time a year and thoroughly clean the threads on the tube and in the barrel. I remove all the built-up crud and carbon. I have found that this works better than oiling the threads. I believe that over time the oil dries up and mixes with the carbon forming a glue-like substance that will make the choke stick kin the barrel. But whatever you do, oil or no oil, take your choke out and clean all the threads a couple time a year and you will avoid problems.
Great video. Thanks for sharing. I love watching a pro like yourself work!
Brand new Mossberg 940 tactical. They used blue locktite on the buffer tube retaining nut. I have a feeling they did the same on the choke tube. I believe I may have to give you a call...
That's an awesome way to get that done and vs the alternative very affordable.
I've just had an event where my choke tube busted at the end and I need the choke removed. I'll contact you.
I would never try this. Great information , thanks
Where are you located? I have 2 I need removed.
American ingenuity, I love it. Nice going
I greased my choke tube, put 100 rounds through the gun and it's seized tight. Brand new.
Had to do this for a friend, luckily I was able to machine my own tools like you did. Exact same down to the map gas and the impact and if that’s a matco impact like it appears to be then we’re even down to the same brand of tools. Don’t do it for someone you don’t know, my buddy was ready to buy a new gun because a tube was stuck in his A5, so it was a “if it gets messed up or broken that’s fine” kinda thing
thats one hell of a stuck tube... do you take the tube and clean the outside if the tube and the inside of the barrel before putting it back in?
Yes. All the rust is removed from the barrel and tube. Anthony will cover all that in the next video.
I have a stuck choke tude I need help with can I get a # to contact you
Do you still do this and if so where are you located?
Wonder if you solder the spud in to prevent tear out???
I have an xtrema 12 gauge that I need the choke extracted. Can you help?
Is there a way I can send you mine to get out? It’s stuck I’ve been trying
Do you still do offer this service?
I have a rock island vr80 with no modifications I want to go out to shoot clays what is the size ammo that I can get that will not harm anything with this shotgun I have the modified choke in it now. Any help is appreciated thanks
Do you still offer this services and how do i contact you
You still doing these removals?
Bonjour quel outil utiliser vous svp ?
Where are you located at..what state
Tennessee
Do you still offer this service?
BTW what happened to the channel ? Only 3 videos ?....
Looks like a great shop..
I had no idea how bad a choke could get stuck.
What specific product do you recommend using and what maintenance should we do to keep the choke tube from getting stuck??
Any type of grease that won’t dry up hard
Where are you located?
Would you recommend anti-seize? On the threads after cleaning?
I use it. Works fine.
Hello I have a 870 that has a modified turkey shoot barrel on it that has a slide in style choke that is seized up and won’t come out. Is this something you could help me out with…?
Are you guys still open?
Definitely better to have you or someone like you do that job
OSR , Can Change My 870 12 Ga. 28" Plain Barrel From Mod Choke to
( Lt-Mod /15 Thousands ) For Steel Shot Loads ? Need to Ship barrel in for work .. Thanks
We’re are you located?
This is a goud method. And I see it working on 99% of stuck tubes. But theres always one that is galled, that will destroy the barrel before it will turn...
Mine’s been stuck for years.
Mine stuck rn y I’m watchin this😂😂
Same here... for years... I needthis guys address.....
John Carroll is a fantastic gunsmith. He works out of Cypress Creek in Dyersburg, Tn. He’s also great at dipping and Cerakoting guns.
And for those of us that dont have that at home?
I would have installed a new choke
$135? I can get an entire new barrel for $125..
This service is for top end guns where barrels are almost nonexistent.
Sir i ned your help please
It can happen quick i just purchased a new barrel
What can happen quick ...getting you choke released ...???
Just a Little anti-seize goes a long way.
Need a choke tube removed
Can you please make a Spud and sell me one PLEASE?
Depending on the manufacturer, there's about 25 different sizes. I have ground them down with a tool post grinder as they've came in over the years.