Suzuki Samurai Restoration Part 62 Bed Liner and Clear Coat, Jimny, Sierra, SJ413, SJ410
Вставка
- Опубліковано 4 жов 2024
- I clean up the appearance of Sammy's rear end. Reassembly after the final piece was wrapped. Refurbish marker lights.
If you purchase items using these links I receive a small commission:
Avery Gloss Dark Gray Wrap: amzn.to/44QyNGc
FixLife FL T-Shirt: www.etsy.com/l...
I'll be starting a big Suzuki Samurai restoration project myself soon, thanks for all the great videos! Yours looks great. The effort and information you put into these has been very helpful in planning my own project.
Thank you, that's great to hear. Good luck with yours. Let me know if you have any questions and hopefully I'll have an answer, if not there's some very knowledgeable people here in the comments section too.
I’m really digging all you hard work on that Zuki. I have an ‘87 Zuki myself that I use as a spare hunting rig at my TX Deer Hunting Lease. My primary hunting rig is a ‘23 Polaris General 4-seater, but from time to time I take the Zuki out instead. My Zuki is in pretty good condition but it is nowhere near as nice as yours is after all the restoration you have done. I would like to trailer mine over to you for a restoration after your done with yours! Keep up the good work!
Hey thanks alot. It's been lots of work but seeing results keeps me going on it. Great little hunting rigs!
It’s coming along! Looks awesome!!!
Yes sir! She's evolving slowly but surely. Thank you and thanks for watching.
It looks awesome, it really do!! 🔥🔥
I have shared your series in a suzuki samurai telegram group... Hopefully it will bring more subscribers to the channel
Keep it up my friend! 💪
That's so helpful! Thank you so much, I appreciate it!
I ordered some LED tail lights and side markers from ebay that came from India as well. They look really good but be careful with how much pressure and bending you do to the wires as the solder joints connecting the wires to the circuit board are terrible. Also, if they are LED then you'll need a resistor for the blinker. Those are cheap and easy to find if you don't already have them. I'm sure you know that already though...lol. Either way, she's looking great. I've really enjoyed watching you do this. It's inspired me on some additional things with my Samurai. If you ever want to take a trip to Florida, hit me up!
I may do the led conversion, if I do I'd prob do headlights also, and you need a separate relay harness for that, and sometimes they don't even work right. We dealt with that on my friends dad's Samurai on one of the episodes. They had the 2 relays wired wrong and they would latch on high. I think I just moved 1 wire to fix it so it wasn't a big deal, just kinda had me scratching my head. They definitely look nice though. Much brighter! Thanks for the comment. I love Florida, I had a friend who lived there for 4 or 5 years so I'd go visit her. She was in St. John's (between Jacksonville and St. Augustine), it was beautiful. You guys have one of the best governors of any state, lately that's been important. I'll hit you up if I ever make my way out SE again.
Let me know. I have a place for you to stay here in the Destin area. I did the LED headlights as well and got the harness with relays. I even have the halo lights that do both running and turn signal. Hooked up with no problems at all. Happy to help if you ever need it.
Let me know. I have a place for you to stay here in the Destin area. I did the LED headlights as well and got the harness with relays. I even have the halo lights that do both running and turn signal. Hooked up with no problems at all. Happy to help if you ever need it.
@@BA-jr9wr Thanks, ya for sure. I think he either ordered the wrong relay harness or they mis-wired it at the factory. It's been working great since we fixed it.
Don’t forget the info on the trailer hitch Thanks
I actually recorded it but it was at the end and couldn't fit it in the video. Not good news though unfortunately. No part number. Its literally just a piece of 3/8" steel that they bent into that shape and 2 bolts into the frame on each side. It's not even symmetrical. I'll show it in the next video.
Hundred more!!!!
Yup, so by this time next year I'll be making 12 cents a day..... Yehesss! Lol.
@@FixLife119 do you think thats all youll get? for real
@@numbskullskills Na lol, Hopefully it would be the kind that folds, not jingles lol.
@@FixLife119 lol, I'd sure hope so, that would suck if that's what happened 😂