Creality K1 - Ultra Fast 3D Printer - Unbox & Setup
Вставка
- Опубліковано 4 сер 2023
- Amazon Links
Buy K1: geni.us/wL7qCE
GT3 Pla: geni.us/bw3AV
Official: www.sainsmart.com/products/cr...
Creality K1 3D Printer, 600mm/s High-Speed 3D Printer with 32mm³/s Max Flow Hotend, Hands-Free Auto Leveling, Self-Test with One Tap, Dual Cooling, 8.66x8.66x9.84 inch
Lightning-Fast Speed:
With an upgraded 600 mm/s speed and 20000mm/s² acceleration, the Creality K1 is 12 times faster than ordinary FDM 3D printers, which can quickly and efficiently print your designs.
Hands-free Auto Leveling:
An array of strain sensors is embedded in the hotbed to generate an accurate leveling mesh. Automatic leveling after printing starts. Simply let the printer do the work for you and enjoy level prints every time.
Sturdy Frame:
Featuring a CoreXY structure, the Creality K1 has a solid unibody die-cast frame that ensures stable printing, even at high speeds, which results in smoother and more consistent output.
32mm³/s Max Flow Hotend:
Built-in new ceramic heater, heating to 200°C within the 40s, instantly melting the filament. Also, equipped with dual cooling Fans, the model hardens before any stringing and warping could happen.
Solve Ringing with G-sensor:
Eliminate ringing with the G-sensor feature that detects even the slightest vibrations and adjusts printing parameters accordingly. This results in crisper and clearer prints that are a sight to behold.
Notice: Please check the voltage of the machine before plugging it in, the US voltage is 115V..
As an Amazon Associate I earn from qualifying purchases
Join Memberships to support this channel:
/ @justvlads - Наука та технологія
Creality K1: geni.us/wL7qCE
SM GT3 HF Pla: geni.us/bw3AV
Good video, finally someone who not only talks, but also shows how the machine works in real time, I needed a video like that to show the printer. Helps you make a decision regarding purchasing it
Looks fantastic!
I finally gave up on my ender 5 s1...I'd level it before every print and somehow could never get it to work.
I think....I'm going to give 3d printing a few more years before I try again.
Dang. Sorry you've had bad luck with your 5s1. I just got a refurbished unit from Creality and 40 prints in and haven't had a single issue. Im also using a Sonic Pad. What kind of problems were you having with your 5s1 if I may ask?
@@michaelquesada7751how much was it and u have a link i can get one from? Thanks
Same w my Last 2 printers worked grest fopr a few weeks then suddenly couldn't get a Print to work got this thing and Perfect eveytime they worked out most of the Kinks it seems.
I have a question, i just ordered the ELEGOO Neptune 3 Pro 3D Printer, its my first printer. All i got with it was the filaments, nothing extra. Do you think that was a good choice as i am on a budget and its my first printer? Do you have any tips and recommendations? I dont know how to use the settings, are they easy? I will definitely watch your video on it a second time when I receive the printer
I got one for Black Friday for $350. Two issues that need to be addressed. First is the filament tube has hard bends that produce extrusion inconsistencies with normal filament (mine came with the new/upgraded steel extruder and i updated the firmware to v1.3.2.20), which is a simple fix of taking it out of the cable chain and loosely zip tying it to the top of the cable chain every few inches. Second is the lid is too close to said tube and should be raised by at least 5mm, would recommend it be a sealed TPU spacer to help with ABS type prints that require the chamber to be warm. Otherwise it's a beautiful set and forget type of machine for most people.
Unfortunately there's a deal breaker if you're planning to print very precise parts. The idler bearings on the carriage aren't parallel. This means that when the printer head moves close to either end of X axis it warps the dimensions of the print by changing the angle of the belt. I measured consistently 0.4-0.9% 90 degree warp on 50mm calibration part printed at each corner, sides, and center (printed at 200mm/s, 5K accel). That made me return it unfortunately. You also need to root it to be able to apply a manual pressure advance settings and have full access to klipper on the printer, or but the lidar to activate the function
My good ol trustily rectilinear printer which i squared, trammed, plumbed, and spit shined has >0.02% on both 90% parts and 45% parts at each corner and side. Which honestly kind of shocked me, but i did spend a LOT of time and effort in making sure everything was squared as good as possibly using a caliper and quality square. Printed at 250mm/s (4K accel)
Last issue 😅the hot-end seems to lack thermal mass, after tuning the hot end a few times i still saw the temp jump +/- 3c. There shouldn't be z-banding on a machine with a single z motor and 3 point belted lead screws (copy of Bambu's bed design) and i saw for too much consistently random z banding, which was telling me possible inconsistent extrusion from fluctuating hotend temps. But that's more of a guess. Saw that on normal White PLA printed at 230c
I aint reading allat but nice i got mine for 450 waiting on it rn
Nice presentation:)
great review
but the plane leveling must be done every time the printer is turned on?
most useful video ever 😀
What does the P Bottom:F mean under the 'prepare' page and the menu/icon on the left? (what does it do)?
Looking to buy a 3d printer solely for making rc parts with tpu would u buy this for doing rc parts or the 3s pro
Good video
Just bought a K1 last night Been using ender3 v2 All i can say is WOW This thing is fast Makes me realize i been beating a dead horse
Is it worth it compared to a p1p?
They have fixed some of the issues. They redesigned the extruder which fixes the under extrusion problem . People who have already purchased one can purchase the new extruder, new hot end kit for like $3.00. It's only available for a short time though . They also said that they're going to unlock it so you can use Klipper on it but they haven't done it yet.
Elegoo Neptune 4 pro or ender 3 s1 pro + sonic pad ?
i just return mine 3 week ago
Mine came with the build plate fully loose, the ABL feature was busted due to it, sent back also.
Care to give some additional details? On the fence for my next FDM printer and shopping around. Currently have a Ender 3 Max Neo and Elegoo Saturn 2
Good
19:06 there are numbers for the nozzle and bed temp to the top right XD
Excellent video. I found your honest approach and openness was extremely helpful, so thank you for that. Can I just ask, did you ever find out what caused the failed print and subsequent damage to your build plate?
can the temperature be changed to Fahrenheit instead of celsius?
Hi
for the black benchy you used which filament which brand?
THANKS
Gt3 pla. Its in the bio. The machine is capable of using different plastics
the material is edited in such a way that you can get nystagmus - as if from a stroboscopic lmap
I got one planing on doing some 3d printing stuff for my channel nothing but problems and Creality is unwilling to help with returns I’d stay away from for the time being till all the issues are worked out
№1 fix thats needed hit end cooling, then build quality QA.
The first layer not bonding to its self is a failure.
Mine came with an stl file called ... Prevent Filament Entanglement, any insight on what it might be would be awesome... I have scoured the internet and cant find any info about
He explained what that was at the 46 minute mark
Why don’t you print it
Simple means less to go wrong. I'm not keen on the phrase, I don't know what it's doing.
I still use paper and a vernier to set bed levels and apart from putting Z off set in the gcode, it's very straightforward.
Simple is simple to fix and complicated is sometimes terminal.
Why do similar threads appear during printing?
Hello! Can i ask for stl for bear?
Good, long review, the point made about 'New' and 'First' 600mm printer for this company was made. I have an Ender3 V2 Nano, it works but at 74 I'm running out of time.... The thing I missed on this device is an exhaust external attachment, ABS smells like crap, with the K1 I don't need to buy a cabinet or add wiring and software for the camera.
Looks familiar 🤔
😄
X1 Carbon …(cought)…(cought)…
Thank you for saving me money. They don't seem to care about quality prints and that makes me very sad.
Sighs I bought a K1 two weeks ago and just returned it to microcenter and bought a Bambi x1c instead. It was just… a mix of delightful prints, and configuration hell. Orca made it easier (Creality print is garbage, utter garbage- who is it for? Everyone who knows what they’re doing hates it because everything is hidden 3-5 clicks deep in hidden dialog boxes and advanced toggles, and novice users will have no clue what to do because it’s so unintuitive - icons with no tool tips etc.) the biggest issue I ran into was trying to change filament on purpose on a single model to get certain layers a different color. It respects a PAUSE command but there was no way to get it to purge without messing up the print in progress, so not only did it take 10 minutes to swap filament - you’d have 2-3 hard lines of plastic on top of your model ruining it. Just terrible support from them, all of the profiles were user created. I rooted it and it only got more complicated
So even with auto leveling it has a chance to fail???
Also was the video sped up or was it real printing that fast???
It looked a little cartoony to be real 😅
So how do you print at full speed if there is no way to change it on the screen?
Yeah same question here ?
Get mine tomorrow, any other issues still persisting? Thanks for the vid
How is ur working out? I’m thinking of getting one
@cheizaguirre5494 actually awesome. Went and got another 2 AMS units today. I must be honest, after the K1 disappointment I was sceptical but VERY happy. I recommend it
@@LucidFX. where did u get it from Amazon? Any tips for me ? Thanks
@@LucidFX. what cad software u use to design parts for prints?
@cheizaguirre5494 I use Fusion360. I used tonuse Rhino when I was doing cnc stuff, now I use fusion for everything because it also integrates with Eagle CAD foe electronics
Do you sell this?
My mom says that's ok, she has one cylinder misfiring too sometimes...
Bought one about six months ago. No big deal, but I still haven't plugged it in. I use the cloud for nothing, worthless in my view. I don't have any mobile phone, so the printer is now doubly useless. Using Ender 3 V2, I have three and they all work pretty reliably. But this thing, the K1 is probably never going to be anything but spare parts for a guy that wants to build a CNC mill or whatever. Junk by any other description is trash, and that's were it's going.
THE FIRST 51 MINUTES OF THIS VIDEO WAS USELESS! I WAS YESLLING AT THE SCREEN, THE FIRST THING YOU DO WITH ANY PRINTER SINCE 3D PRINTING STARTED IS MAKE SURE THE LATEST FIRMWARE IS INSTALLED. THAT IS THE OUT OF BOX EXPERIENCE TO SETUP WIFI DURING SETUP AND UPDATE FIRMWARE. YOU FINALLY UPDATED FIRMWARE @ 51 MINUTES INTO VIDEO. GOOD JOB!
I would get Bambu Labs that is the same price
My experience was a little different, I found that there is no toll-free support phone number to call, you have to use chat support. I had 4 different incognito support chat windows open since the morning which extended passed 1 in the afternoon and all chats auto closed on me and asked me to leave an email instead. I am a cyber security person by day and I have to say their support is negatively impactful and you might as well have a brick for a printer WHEN it malfunctions. Great features and all but not if they don't work.
oh yeah?
creailty as sorted out the calibration and input shaping
48:49 bro leaked his ip
You're one of the few people with an intact K1. Lots of people have reported receiving them with damage of some kind.
99% of people dont post their life to youtube so you dont know what most people do bud
The K1 was just rushed out, I'd rather have my Bambu becuase I works so well and If you turn most of the calibration off it goes perfect every time. I have the X1C so the printer uses the lidar to check the first layer and calibrate the filliment but I do the calibration before hand due to the fact I want to do it myself to get the best result and so It does not need to do it every time. Every print its checks to make sure that there is the correct bulid plate installed. It only does bed leveling but only does a new mesh if the 5 points are out by a certan amount and checks the first layer using the lidar. Also the K1 does not support MMU and it cleans the nozzle but no as well as the bambu.
Why does this whole vid sound like an ad
I know two people who bought this printer. One returned it, the other one had serious issues with the device. Thus, I am very sceptical about this printer and thus also about UA-cam videos which celebrate the K1. Seems as if Creality had to respond quickly to Bambu Lab, but failed to design a reliable product. It is more of a me-too-product. To be honest, I‘d prefer not to have titles such as „Ultra Fast“. Such titles make me ask whether this is an advertisement video of influencers who got the printer for free or a honest and objective coverage of a new product.
They have fixed some of the issues. They redesigned the extruder which fixes the under extrusion problem . People who have already purchased one can purchase the new extruder, new hot end kit for like $3.00. It's only available for a short time though . They also said that they're going to unlock it so you can use Klipper on it but they haven't done it yet.
Is bamboo better?
@@cheizaguirre5494 I really don‘t know. I got a Prusa and very recently a Bambu. I did only a test print on the X1C which worked fine, but this doesn‘t mean anything. Originally, I considered a K1 but didn‘t buy one for what I have heard from a colleague and a friend. Hopefully, the X1C will be a good experience. As far as I know, the Bambu Lab printers had some issues in the beginning which seem to be solved. Maybe, the same will happen with the K1.
I'll pass on this printer. Proprietary software and hardware is not a direction we should support. You can't change a bad driver or upgrade them if you want, because they are glued in place. Some of the key bearings (Z) can't be replaced when they wear out. Bamboo and Creality are following the Apple and Microsoft anti-consumer business model. Do you really own it if you can't fix it? I can't understand why the creators reviewing these printers are fine with these things. "That's the way things are now" These new practices go completely against the idea of being a maker.
They have fixed some of the issues. They redesigned the extruder which fixes the under extrusion problem . People who have already purchased one can purchase the new extruder, new hot end kit for like $3.00. It's only available for a short time though . They also said that they're going to unlock it so you can use Klipper on it but they haven't done it yet.
It heavily depends on what kind of maker you are. I create electronics and use 3D printers to print enclosures and functional parts. It is not my business to tinker with 3D printers, but to use them. So for me a Bambu Lab is the right choice. It is a consumer product like a TV and I certainly don‘t wanna repair or upgrade TVs though I could.
I don't understand the hate of recent companies developing the new kind of 3D printers that can be on par with many industrial 3D printers. On one hand, it is very fun to buy a cheap printer, mod it to your liking, and constantly tinkering it. But on the other hand, the convenience and the amount of time you are going to save by buying these next gen printers is really worth the money. I'm also a maker (currently an engineering student) I love my ender 3 v2. It served me well as i mod and print with it for countless of hours. But there are times that I don't have the time nor resources to mod it prior to an encountered problem that makes my printer inoperable at the moment. I just want to print something or my prototypes out of the box, no tinkering, no fuss, etc.. just pure printing. After all, 3D printing is invented solely for rapid prototyping and manufacturing.
If you enjoy 3D printing as your own hobby, then have fun and be yourself, but to gatekeep 3D printing to the people who want to enter this space buy purchasing the next gen printers so that they can have an easier time printing, and less time dealing with all of the bullshit, just wtf?
That's why you can choose. It's ok, we still can make choices 😊
They’ve gone open source
you printed something overnight but didn't set up your camera to capture the timelapse??? hmmmmm amateur! 🙂
Lots and lots of reliability issues with this printer. I’ll give it a hard pass until the bugs get ironed out, if they ever do.
They have fixed some of the issues. They redesigned the extruder which fixes the under extrusion problem . People who have already purchased one can purchase the new extruder, new hot end kit for like $3.00. It's only available for a short time though . They also said that they're going to unlock it so you can use Klipper on it but they haven't done it yet.
@@hed420 that update for klipper is coming in September supposedly
@@Kami3Kazeis it out?
@@hed420 Gosh, BOT!
Mastering the music 8 times louder than your voice hurt my ear drums 15 seconds in, no thanks.
This video is payed by Creality! Never trust this influencer!
I have never been paid for any video on this channel and creality did not send me this K1, but i do understand your concern!🤙
Why in every video , all the printers are perfect?
I understand that is a business but stop to say that every printer is nice , have premium details and so on.
I never trust your videos
Because he gets sent actual working review units that the companies triple check everything works great. The K1 has issues but the main ones have be resolved so far.
because once you become hypercritical you don't get free stuff sent to you any longer for review... and of course the units sent to him are checked 20 times to be sure they are working well... not like the ones sent to the average joe.
Some have no issues. some do. it depends
Why do similar threads appear during printing?