Це відео не доступне.
Перепрошуємо.
DIY Electric longboard - Croatia
Вставка
- Опубліковано 5 лис 2016
- Hi guys, this is my video of self-build electric longboard. I hope you enjoy it and it inspires you to do your own build.
It can reach speed up to 30kmph, and can go up to 10 km at a moderate speed.
All together it cost 320€.
Parts:
Motor: hobbyking.com/... - 68€
Battery: hobbyking.com/... - 26€
ESC: www.hobbyking.... - 33€
Transmitters: hobbyking.com/... - 21.60€
Connectors: hobbyking.com/... - 4.40€
Voltmeter: LED RX Voltage Indicator for Lipoly & LiFe Battery - 2.20€
Pulley: www.ebay.com/it... - 5.60€
www.ebay.com/it... - 2.10€
Belt: www.ebay.com/it... - 1.60€
Trucks: 180mm
Whelles: 70mm
Now that truly was an impressive build
Not everyone wants to ride 30 km/h but thanks for the great calculator page David. If you are building a board for transportation, then this ratio is great and get's you around in traffic just fine. I have this same ratio on my electric board and it works great for getting me around and doesn't drain my batteries. Thanks for the DIY video.
Great video, great great all, you re lucky girl and the best dad! thumbs up for you guys!! love yr job.
I'm impressed at how much of the work you did yourselves rather than just buying everything. Good job!
4 female for 1 male, this guy is a king
wow, this is actually a good build and video. Thumbs up😀
Kauza Mohlamonyane thank you
Good choice on wheels, nice big contact pads for putting power to the ground.
ima I nas hrvata kreativnih ;) :D
Amazing!!!
Saludos desde MEXICO!
Después de 1 año.
7de junio 2020.
Todo bien.
Nice made look good
Svaka čast, ja upravo očekujem još par dijelova za svog sastavit :D
arsen ivanisevic super, kakav si uzeo motor i esc
Uzeo sam VESC od enertiona, imamo isti motor, a ispod cu 3d printati zaštitu za komponente. Meni su i kola s rupama, dosta gotovih dijelova, tako da ste vi napravili puno bolji DIY! I video je super
arsen ivanisevic hvala
good job😃
nice job !
Wow...this is how I imagined it would go. Awesome...thanks for sharing.
It's good to see you managed to bind your Quanum transmitter with the receiver. I never get them to bind even after buying a new receiver! Anyway, good video!
sufyanbs thank you, i didnt have any problem with tranamitter, and hope i dont
Svaka vam cast! Ovo moram da probam da napravim!
Very cool
Well done. 👍
Smart !
wow odlicno ste ga slozili! ja imam neki projekt u glavi ali nemam bas alat
i made a similar board but with a concave, it is very simple to do concave
Saludos desde Colombia. Dame el lugar para adquirir el motor y demás. Gracias
You can find something like this on the Avasva page. Full step-by-step instructions right on your desk.
I love you bro
Thx for the video dude
well done ! :) svaka čast
Great video just be careful cutting metal of the motor shaft it can get stuck in the motor magnets
Svaka čast! Vrhunski odrađeno.
Razmišljam o izradi sličnog, al bi htio da mi strujo uskoći samo tu i tamo, većinom na nagibima.
Po tvom iskustvu jeli 'hvatanje' polova magneta pri odgurivanju bez gasa na kontroleru toliko izraženo da ga je nemoguće koristi bez pomoći elektromotora?
Arch Stanton moze se koristiti samo za odguravanje, ali se osjeti otpor, ne bi se isplatilo samo za nagibe koristiti
At 7:59: "More Voltage will give you more distance". I'm not sure about that. I thought that more Voltage will give you more power (speed) and more mAh will give you more distance. To get more mAh, you need to connect more batteries in parallel, to get more Voltage, you need to connect the matteries in series. Is that correct?
Nice board, by the way. Good diy project.
yes, you are right. voltage and current are connected
Super izrada!
Hi, is your board still working?
I'm also building a skateboard.
I have a question you used vesc with 50A and your engine takes max 80A is it okey or is it setting the program?
I used an interpreter but I hope you will understand me
Pozdrav napravio sam el skejt samo sto sam pravio jeftinu verziju sa obicnim dc motorom od 150w 24v i dve baterije od po 12v i 2.4Ah ide onako slab je za mene pa me zanima ako bi mogla da mi pomognes koji malo jeftiniji brushless motor da kupim i esc posto se ne razumem bas u to toliko nikada nisam radio sa tim motorima a najvise jeftiniji zbog carine itd... a da ne moram da menjam baterije nego da mogu da povezem na ove...
I would like to make a four wheel drive electric skateboard. I've bought two motors and two VESC's with a Nano remote control. haven't got the parts yet, but wanted to know if I need a different remote control or what sort of electronics to make a 4 motor electric skateboard?
the battery is way to low...
the motor can handle 37V.. that means you could take a 10s battery or 2x 5s batterys in series to get 37V.
then your motor would me more powerful and way more efficient.
also 5000mah is not that much.. so you cannot drive very long with thos LiPos :( but great video :)
it's exaclty what I thinking, he can get much more high speed and range !
Hi there, great build!
What programming card for the ESC did you use? And which mode did you set it to?
Thanks
Postoji li neki drugi nacin da se kutija pricvrsti za dasku? Kupio sam novi longboard pa se bojim sarafit jer mi je stari pukao.
how about ESC? does it overheat? My turnigy AE 80A catch on fire . it was unable make the board moving.
didnt have any problem with it, maybe it get a little warm but insensibly warm
Guys any idea if this is applicable to a carbon fiber deck? Gonna build my dream ride but im worried about how to secure the enclosure properly.
I think you dont have to worry. Do you have any specifics to worry?
Nice video! What if i want to have 2 motors? Is it the same?
Nice!
How do you charge the batterys?
what'd you use for a power switch? Did you also use a loop key?
Max Taubert i didn't use power switch, just turn off receiver, and at the end of day i put batteries to charge
Batteries in series doesnt give you more distance, it gives you more power.
Asbjørn Kofoed-Nielsen actually it gives you more distance and power
Series ups the voltage, parallel ups the amps.
If power is amps and voltage, technically parallel and series give you double the power.
i like to have a skateboard which will works for 30 km total per day for my work place to home and home to work place... i have 20 to 25 min to reach place... which model should i have to choose?
Harshal Gohel you have to choose better battery
Thanks for your kind reply... Better Battery in the sense high power storage... so that it work last long... but m confused to get a perfect motor which motor would be best for this config.?
ejj pozz prije svega
svaka cast
stvarno ste me inspirisali
mozda i ja napravim
What the volt of battery
Great video! what was your experience with hobbyking how long was shipping etc thanks!
You built this 5 months ago. Hows the board going and how are the batteries working out?
MyPupDaisy it is doing good, nothing change
hey, I want to ask you. You need to change the batteries after they are empty or you can recharge the batteries? I wait an answer
Eu Nae if your batteries are empty they will be damaged. Li-po batteries can only be empty to certain voltage
AllInOne Videos best answer
how do you charge it? do you need to unscrew the box or what? thanks
samuel lopez for now yes, but i am going to put connector for 3s to 6s and put it outside of box so i dont have to unscrew it
Jel se mozemo cuti preko fejsa ili nesta? Imam par pitanja...
Hi, i made something like that but my motor is a bit trambling when I run up. I have 280 kv motor x car 150A esc and 2x 5000mAh batteries 20C 3S .
can you help me please ?
I don't know exactly but maybe you can bolster a holder for motor because it is a bit strong motor
hows the performance of the board?
I was looking for buying the same ESC but the brake settings made me wondering. Can you brake in a good way? My old one was too hard or too soft and therefore it was not good for riding on streets with cars. Please tell us about your experience.
My second question is: The ESC should be water cooled but you cool it with air. Does it get hot or worksit fine even after 30min of riding?
Viktor Kurz No, i can't brake on that esc, doesn't have that settings
Isn't it dangerous??
Viktor Kurz a little bit, but i dont go that fast in the city that i dont have time to stop with my foot
I use longboard for ride to the collage, I drive it on the sidewalk because the streets here in Zagreb are to fast for e-board, so I usually go around 20 km/h or less. I always slow down on the crosswalk for safety. I checked the ESC for heat and it was cool after almost riding it for 30 min so I dont have problem with that.
how you can charge the battery for it?
you can guide me the power switch to Electric longboard?
hoang doan i will make a video about charging in a week or so
do you know, where I can buy rotor wheels. just like the mellow drive. I think that scheme have less power loss
on ebay, dont know really
Hi, have you had any problems with this ESC? Oficially it is watercooled and maybe there were some troubles. I ordered same one (not delivered yet) and for some days I wonder if it is good choice.
Marcin Szczeliniak so far i didnt have any problem with it, it not even warm after a ride
It is quite strange. The one which i have gets really warm after some seconds of ride ( motor too ). One of capacitors exploded so claimed it and new one has been sent to me. I wonder selling it and buying any car esc.
A Vesc would be an alternative but it´s not cheap.
lanty86 I thought about it, but costs of shipping to Poland are horrible. It would be better to buy Airwheel M3 or something similar -_-
where can i buy this maple plate. I cant find in hungary
I went to a store for all kind of wood, parquet, bathrooms. I think you need to have that in hungary
how is your esc water cooled
justin21002002 it is not, i check it after rides and it is not over heated
What type of plywood is this?
how well does the board stops? i build my own before seen this video and i have a problem with braking in my esc. By the way good video!!
Antonio Conde thank you, this esc doesnt have brakes
Ekipica s Jaruna :D
Whats the song in the begining ? so dope
shazam
Where did you geht the Voltmeter
i bought it on hobby king
Do you have a schematic of the wiring?
TriFlix Films I filmed how to connect batteries with esc and motor. It is really simple, just connect batteries in serial and then with esc
Super DIY video , planiram napraviti slicno ovako nesto svojoj curi :) Zanima me kako ste programirali ESC? Ono za programiranje low woltage cut to mi je sve jasno ali me pored toga zanima dali se moze na neki nacin oslabiti startnost i ubrzanje.. kako bi se ESC manje grejao.. Procitao sam na vise mesta da su ti jeftini hobbyking ESC'ovi losi i da brzo krepaju :/
Bas me zanima kako vas taj vas ESC sluzi
Igor Tomic nama se za sad uopce ne grije i sve super radi, kao sta si vjerovatno vidio stavili smo aluminij oko esc za svaki slucaj, imas za isprogramirati lagano ubrzanje tak da to nebi trebao biti problem
E pa da to .. To mi je bitno.. Sobzirom da je snaga tom vasem sistemu oko 2000w mislim da je sasvim razumno smanjiti malo ubrzanje i na taj nacin cuvati kontroler ... a i baterijama produziti zivotni vek :) Koliko imate dometa sad, jel izvucete 5-10km? Vidim da su multistarove LiPo baterije ponovo na akciji , jako dobar izbor ako se ide na kapacitet/domet.. Ali je mana sto su samo 10C pa ih nije bas preporucljivo muciti sa nekim jakim ESC kontrolerom ;/
Igor Tomic motor od 2kW je previse jer nikad ne dostizem tu snagu, i bez problema se narihta slabije kretanje. Do sad sam do kojih 8km uspijela, modernom voznjom
Snaga se najvise koristi pri startu i ubrzanju.. Posle prilikom odrzavanja brzine trosi se mnogo manje energije negde oko 500-1000w zavisno koliko brzo ides.. Dakle ti tvojih 2kw mozes samo da osetis kad ga od nule napanjis onako bas posteno :)
hello
great video :)
i am thinking of making myself an electric board too but i am curius how much dod you pay for the whole project including customs
Rene Brglez 320 €, I wrote it in description
Koliko je težak board sa svime? Ja sam napravio skoro pa identičan takav, jedino sam stavio 4 batke po 5200mAh :) Imam dosta tih baterija, i dijelova, od različitih letećih modela koje imam. Uzeo sam kad su bile na popustu na HK (Multistar, zelene). Sve skupa board mi je težak skoro 9kg. Sad eksperimentiram pomalo sa svime, od elektronike, do mehanike, kotača, ovjesa, LED diode ću stavit naprijed i natrag itd..Sljedeći korak je napraviti direct drive, bez ovog pojasnog prijenosa. Da se svašta složiti ako se ima volje i vremena. Ja sam gledao recimo ove komercijalne daske, tipa Evolve GT, cijene su astronomske! Mislim da je nasjkuplji model cca 2250€, + shipping, što nema nikakvog smisla. Možda za bogate hipstere ili tech royalty iz Silicijske doline. Uglavnom, lijepo se da ovako nešto u kućnoj radinosti napraviti. Za klince idealan projekt. Zainteresirati ih za inženjerstvo i tehnologiju. Mene je koštalo sve skupa cca 400€. Budem stavio neki video uskoro. Lijepi pozdrav iz Španskog.
mislim da sam izvagala i bilo oko 7,5 kg. I ja sam gledala prije izrade te komercijalne i preskupo je to za sada, možda u budućnosti. led diode bi bas lijepo izgledale i ispod, to ću ja u skoroj budućnosti napraviti. Kada stavis video pa javi da ga pogledam. Pozz
Bamboo is far better or a flexible wood.. 😊
Mind letting me know where you get your 70mm wheels from?
I bought longboard that came with 70mm wheels, i bought it on ebay
Can you put a link to this auction?
What is the distance you can drive with that batteries with 70 kg man?
Sasha JU i think you can drive around 10 km
Thanks)
electero motors's rpm ?
when batteries connected in series, do they draw equally? poz from croatia
Djambo yes, they do
thanks
Im seeing the message you sent to me in email but I cannot respond :( I am already in Zagreb right now :) Im planing to go to ''Radiona'' mackerspace.. just not sure at what time is it open today.. do you know any other places where I could get access to some tools like soldering iron, drill? Perhaps even 3d printer for mud flaps :)
Koliko mozete preci na napunjenoj bateriji dok se ne isprazni?
lagana brzina moze do 10 km, a sa kojih 15/20 km/h oko 7km
jeste li dobili karticu za programiranje uz esc ili ste ju posebno kupili?
Oliver Nagy posebno smo ju kupili, isto se nalazi na hobby kingu, ne kosta puno
ok, hvala
You should really look into trying out another gearing ratio because I'm sure you'd be able to jack that speed up to 30 km/h.
This calculator might help: toddy616.blogspot.nl/2013/07/electric-skateboard-calculator.html
hi first of all good job congrats. i have a question , what if i use this 2 battery pack hobbyking.com/en_us/zippy-flightmax-8000mah-2s1p-30c.html instead of yours. ty
BB you can use it, you will get more distance than I
Super long board ja bi samo promjenio upravljač i kutiju za elektroniku
ova varijanta mi je bila najpovoljnija za ono šta ja koristim, ali da slažem se s tobom da bi super došao bolji način upravljanja
where are you from? I'm from Pula
Matija Čupić iz zagreba
How much was the build
Lil-T the board cost around 20€,
wheels and trucks 70€, and electronic around 210€
is there brake on this?
edwardlui531 this transmitter doesn't have break, if you want brake just buy another transmitter
interesting, have you tested that?
edwardlui531 no, i dont have other transmitter, but esc give you a chose to turn on/off break
what batteries?
Bradley Hille i used turnigy 5000mAh 3S 25C
Odlican video,moze neka mail adresa imao bi par pitanja vezanih za izradu slicnog skejta.
javi se u inbox
Pozdrav,informacija koja me zanima je koju vrstu šperploče si koristila,koliko debela šperploča i koliko slojeva?
molim te ako mi se možeš javiti na danijelvcl@gmail.com.
Unaprijed zahvaljujem
How fast?
legit elegant the fastest i went is 30 km/h
cool!
dam that seems slow as hell , mine was hella fast ha
sound ?
Вова Скляр i used david cutter music
Thank you for having responded, could not Would you like to send a specific name Perrin used in the video?
I also used the songs from Czech Vibes Sound
Check out the components from the DIY skateboard built in Berlin making 51 km/h
e-boarder.com/en/diy-electric-skateboard-conversion-kit/
A little patriotic
the fuck happens to the music
Hi guys, can I please ask you for an advice? I have very good trucks, but not useful for skateboard electric project. Do u think thats even possible to make the ends of trucks longer? Like 1,5x times? pict (imageshack.com/i/poz1424xj) about this part longer. Its possible to weld it like that? Its possible to have back trucks longer than front ones or I would have to make longer the front too? really dont want to replace good trucks with bad ones :/
I am really glad and thankful for any help!!! Thanks
I am sorry, I dont know if you can make them longer
muy lento
Молодец! Я занимаюсь разработками в этом же направлении. Правда мой немного больше ua-cam.com/video/vIROrdZnjZc/v-deo.html
It was painful to watch your lack of soldering skill. I thought my son to solder a few months ago and it took him 10 minutes of practice to get military level soldering technic. Nice DIY build though.
hello, i have a question. i'm building a longboard for a school project and i'm thinking about using the same ESC as you are using. the only thing that i am worried about is overheating of the ESC because it should be water cooled. did you have any problems with overheating or does it stay cool.
i hope to hear from you.
bye
Btw, i am also using the same motor so de ampere ratings are the same
Marten i dont have any problem with esc, i drive around 20 min in one go and after that esc is cool.