How to Replace the front brake pads on the Nissan Versa 2007 to 2019

Поділитися
Вставка
  • Опубліковано 20 лис 2020
  • Do you need to Replace the front brake pads on your Nissan Versa (2007 - 2019) but don't know where to start? This video tutorial shows you step-by-step how to do it!
    Our Nissan Versa (2007 - 2019) manual covers the petrol engines, and includes videos for some of the most common jobs, which you can see here in this playlist. Get the full manual haynes.com/en-gb/nissan/versa...
    What's covered:
    Nissan Versa Haynes Repair Manual covering all models of Versa for 2007-2019
    PLEASE NOTE that this manual is intended for vehicles built to US specifications and do not cover diesel models unless specifically stated. Although it is useful when the products or systems are similar to those in other markets, there may still be significant differences, especially in areas concerned with safety and emission control.
  • Авто та транспорт

КОМЕНТАРІ • 12

  • @jrsavoie
    @jrsavoie 2 роки тому +15

    You should show the jack and jack stand points.
    Also show all associated torque specs

    • @brvfd822
      @brvfd822 9 місяців тому +2

      And mention bolt sizes.

  • @eloycontreras6214
    @eloycontreras6214 2 роки тому +3

    Thank you very much,iv grown up using yalls books to fix my vehicles over the years

  • @7925Joe
    @7925Joe 3 місяці тому

    You always need to support the brake caliper so you don't risk bending the brake line or risk breaking it. Save yourself problems by taking an simple extra step.

  • @Zboarts1990
    @Zboarts1990 3 місяці тому +1

    No front brake pad return springs? Do you need them on this vehicle?

  • @carlosmieryteran3459
    @carlosmieryteran3459 9 місяців тому +1

    The wear indicator is incorrectly installed; it should be on the opposite side of the caliper. This allows it to 'open' and reset when the disc makes contact with it.

  • @age_of_reason
    @age_of_reason Рік тому +2

    I am just a DIY mechanic, not a professional by any stretch, but isn't it bad to put brake cleaner on rubber caliper pin boots? Won't they enlarge and become loose?

    • @HaynesManuals
      @HaynesManuals  Рік тому +1

      No, it should be OK to use brake cleaner on rubber parts. Any effect will be temporary.

    • @jrsavoie
      @jrsavoie 9 місяців тому

      That is only correct for certain brands of brake clean. I've accidentally got brake clean on wire loom and watched it shrivel instantaneously.

  • @GreentipsCo
    @GreentipsCo 2 роки тому +6

    You should bleed the brake lines when changing pads, since you have the wheel off.

    • @LiilTyweezy
      @LiilTyweezy 2 роки тому +21

      no need to bleed if the system was not open or compromised in anyway

  • @jjpopnfresh6822
    @jjpopnfresh6822 Місяць тому

    'The fluid in the reservoir will raz'