How To Replace Front Brakes 2010-2013 Nissan Versa

Buy Now!
New Brake Pads from 1AAuto.com 1aau.to/ia/1ABP...
Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes. This video shows you how to install new, quality TRQ brake pads and rotors on your 2010-2013 Nissan Versa.
This process should be similar on the following vehicles:
2007 Nissan Versa
2008 Nissan Versa
2009 Nissan Versa
2010 Nissan Versa
2011 Nissan Versa
2012 Nissan Versa
Tools you will need:
• 14mm Socket 1aau.to/od/1AXA...
• 21mm Socket 1aau.to/oe/1AXA...
• Torque Wrench 1aau.to/of/1AXA...
• Brake Grease
• Copper Anti-Seize
• Wire Brush 1aau.to/oc/1AXA...
Subscribe: / @trq
Check out our playlist:
2007-2012 Nissan Versa 1st Generation: • 2007-2012 Nissan Versa...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@onenikkione]

Excellent. Just remember to use some brake-clean on the rotors before installing as many come with a coating of oil to prevent rust during shipping.

[@southbound8482]

look no further, this is the most detailed video ive ever seen, great job

[@50plusmtbatbp94]

best tutorial I've seen so far.. excellent! Didn't leave me any question or doubt at all. Good job!

[@Ceroluck]

You're suggesting to put red threadlocker on the caliper bracket bolt. Isn't this going to make it almost impossible to remove without using heat?

[@miqiee]

On my 2010 Nissan Versa the lower caliper pin has a rubber insert on the pin shaft, the upper pin is all metal. Why is that?

[@christianhutt1022]

Cuz

[@TChou-zn4yd]

Dear Sir, I'd like to consider you AutoMechanics are as important as doctors because you give our cars running safely. So we would be able to drive to work earn a living income, drive to any where we need or want to go to.
Thank you sir.
🙏May you be healthy, kind, generous and Safe.👍👍🤩😍🤘🤘Rock 'N' Roll🤘🤘

[@TChou-zn4yd]

This is the Best tutorial. What is the name of that copper spray. Thank you CarDoctor Sir.🤘🤘

[@deadmoney2093]

No bleeding?

[@kisangkim1105]

Brake pad springs seem missing. I apply some thread lock on bolts on pins for extra safety. Overall good video.

[@simplebeautiful7923]

Best brake job.

[@barrysuss4421]

Shouldn't you open the brake fluid reservoir? Does it matter?

[@DrDoomBloom]

Excellent video

[@singhavtar00]

Great job 👍

[@georgeotero3993]

Awesome video thanks guy

[@trueforum378]

Great Video! well done bro

[@socalchick_3581]

Awesome vid

[@garrettgiuffre7298]

Are you related to Chris fix?

[@greglamb2559]

Great Vid!!! THX