How To Repair - GE Stackable Washer Dryer Combo not Spinning or Draining
Вставка
- Опубліковано 4 чер 2022
- This video goes over a common option to fix a GE stackable washer dryer combo if it’s not spinning or draining water. Could be the belt or Thermo Actuator. I’ll show you each step how to debug and repair this.
Direct Contact: how2togo@gmail.com
Shop for products I use and recommend on my Amazon Storefront….
www.amazon.com/shop/how2togo
Disclaimer: Due to factors beyond the control of “How2ToGo”, We cannot guarantee against improper use or unauthorized modifications of this information. “How2ToGo” assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. “How2ToGo” recommends safe practices when working on vehicles, properties and or with tools seen or implied in this video. Due to factors beyond the control of “How2ToGo”, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not “How2ToGo”. - Навчання та стиль
My 19yr son literally just looked this up and found so much underwear and socks and is currently trying to put our belt back on. He’s taken initiative to fix it himself and I couldn’t be more proud of him. Thank you for offering this information. It’s truly awesome of you
That is fantastic. You have a good kid on your hands.
Just found six socks behind my front panel (all mine 😅). Belt didn’t even fall off, just jammed. Worked immediately after. Thank you so much for this video!!
He must be a snowflake.
Thank you 💖 15 minutes to fix, 10 socks, 1 pair of underwear, and a scratch lol but I didn't get ripped off 💪🏾 continue to bless to be blessed 🙌🏾
This video keeps on giving. Thank you! Seven socks and a few pairs of underwear smh, I was able to easily put on the belt. I'm sure this will continue to help people for years to come.
Thank you soooo much. My son has the same stackable and the same issue. A plumber quoted him $800 over the phone and told him to just buy a new one. I'm his mother a 60 year old woman and when he went to work today I went on you tube and found your video and fixed it. You're video was great you're a good man thank you so much.
Thank you for the.comment. that is fantastic.
Thanks!. Your steps fixed my machine. Recently retired and was thrill that I did not have to call a service repair person.
Ohh Brother, Thank you so much for sharing this video. I searched so many video to diagnose the problem but this video has saved the repair cost or probably new washer dryer cost. Found all of my toddlers missing socks and put the belt back on the motor. God bless you!
A year later and still helping people. Thank you.
Found your video right away. It was exactly what I needed. Fix the washing machine all by myself without having to call someone for the first time! Thank you so much!
This was so helpful! Thank you!!! We fixed our washer without calling a repair man! You saved us so much $$!
Thank you so much, we bought this house a little over a year ago and the washer and dryer came with it. We started having this issue with the washer a couple days ago so I find this video, follow the steps and sure enough someone’s whole sock drawer and a couple skivvies were down there with a belt off the track, cleaned it out and got the belt back, works just like it used to now. Thanks again!
Thank you so much. It helped us a lot. We struggled with the issue for the past 2 days. Finally, I found your video. We got it fixed in less than 5 minutes. Thanks a lot once again. Saved much dollars without calling repair person.
Thank you SO much for this video! We found NOT one, but about TEN socks down there!!! For sure that had to be why our belt fell off. Thank you again so much!
Thank you! 🙏 from a fellow Canadian victim of a sick washer and dryer 😊
Your video was extremely helpful. Although I didn't have the same issue I was able to troubleshoot the serious issues and confirm what I thought was happening was a much simpler solution. Plus now I know all this cool stuff !
??? What was happening with your machine...
Thank you for your post, it was extremely helpful! I removed all the socks and stuff under the tub and put the belt back on and it worked perfectly!
Fantastic video - 17 socks, 3 face towels, 1 tighty white removed! belt put back on, problem solved. Much appreciated.
hey bud, watched your video half an hour ago, and yeah, my washer wasn't spinning 'cause the belt fell off. took me five minutes to fix. thanks man, I know this video's a year old, but it's plenty useful. glad you made it.
Thank you! This was exactly what my problem was. I wish all instructional videos were made this way!😁
So good to hear. Thank you for the comment
❤😢😂
SAME! legit just fixed it
Just watched your video and fixed my washer within 10 minutes, I was about to buy a new setup from costco, you saved me $1800. Thank you
Spot on! Opened up the front panel, Fond a few socks and a dropped belt. Back to working in less than 10 minutes! Thanks.
One putty knife and five minutes saved both the washer and about 5 socks! Thanks for addressing the actual issue instead of the usual lid-lock solution.
Thank you! I opened this up per your instructions and saw exactly the same as you did- a rogue sock and a disconnected belt.
THIS is my 'Go To' video to open the front which I Always forget how to do !! Thank You !!
Thank you thank you thank you! Saved me a hefty repair fee! I opened up the front of the machine and was greeted with a year's worth of socks burying the belt. Once I cleaned it out and reattached the belt it ran like new again!!
Thank you! My husband works offshore and something always seems to break while he's gone. I was able to watch your video and fix my washer by myself!! 😅
Thank you!!! My daughter and I just fixed her washer! But the belt was NOT that easy to put back in place…. But after about 30 minutes - we did it!!
Very helpful you save me a lot of trouble with this video. The belt was off on my washer and i found the missing pairs of all my socks. Thank you!!!!
Thank you so much for this video! My belt had fallen off from Sox being caught between the belt. EZ fix thanks to you!
Man you just saved my poor mother alot of money. Fixed her washer in five minutes. God bless
You made my day.
Dude thanks a bunch under a tight budget and it definitely has helped us in our small business
Seeing this two years later. Thanks so much for this
Followed your video and the washer is fixed!!! You are a great teacher! Pb and Cb.
Thanks a lot!! I was unable to fix my dryer without waiting for someone to come check it out!
THANK YOU THANK YOU THANK YOU !!! This worked so perfect and now my washer is back to normal! Found so many socks 🤦🏾♀️ You are Awesome and I'm sharing this on ALL my social media 🤗🤗🤗🤗🤗🤗
Thank you for your easy to understand, quick, step by step demonstration and explanation! It worked!! My story was almost exact as yours!! Washer Repair for Dummies🤪
This girl will not be overfilling the tub Ever Again!!
It's called a Termoactuator, I looked it up for my daughter's GE stacked model(not sure if you said Thermo or Termo). I just sent her this link so she can get the front panel off to tell me the belt is in what state and we'll go from there. Great video thanks for this. Cheers
Thanks a lot lot man! Your video was super well explain and you saved me tons of time looking around about the procedure. It was exactly like you said. Everything’s working fine now.
Great, thank you for the positive comment.
+😊😊
You saved my socks stuck down here from a terrible future. Thank you. You are doing gods work
Thank you. I had the same problem and I did save a lot of money calling someone to fix
Thank you so much for your video! We had a professional look at our washer and couldn’t fix it. But when we tried ourselves one more time using your video, it worked!
Now your the professional. Lol
Thanks for your video! This got me started with my fix, unfortunately mine wasn't the belt or Thermo actuator, it was a sock that got into the drain pump, but your video definitely got me to the right area. Mine was making the similar noises to yours, when i had the front panel off and did some investigating, there were a ton of clothes in there, but the belt was still in tact and spun manually. I turned it on again, and found the noise was coming from the drain pump. I was able to use a wet-vac to get as much water from the tub as possible, disconnected the hose from the pump and pulled out the sock. its up and running again! saved me $$ from having to call in a repair person. :)
Thank you so much, Helped me open up a dryer since a sock fell in and we found tons of other old socks.
Man thank you so much. You saved me a ton of money on a service call and *gasps* a trip to local laundromat. 😊
Your video is very self explanatory. Thank you so much! Our belt is laying on the floor. I followed your instructions but I’m unable to get the belt back on the motor even by turning it. Not sure what the heck I’m doing wrong.
Thanks. The instructions was good and clear. Straight to the point. Just remember. If it is made out of plastic. The item is made to break. Plastic is not a good material for long term quality. 20 years. The life of a washer.
Thanks bud. This helped. In our case it was just the drive belt. More than just one sock inside the machine though. couple socks, pair of underwear, work glove... lol. Saved us having to get a repair guy here. Thanks again! :D
Great video, I had to replace my Thermo Actuator too. Totally easy fix…..until you find the drain pump was jammed with the tub cover o-ring that fell apart after replacement.
All is well now, with somewhat minimal water mess!
Thanks for the video!
Thank you. 🙏🏼 You literally saved me time and money. And also made me realize I need a new belt but at least I know how to replace now.
My local appliance guy wanted over six hundred dollars to fix this for me, and to transport it to his shop. It was just a belt! Damn, thank you for saving me so much money which I don't have. I also feel so good for having fixed it myself :D
Oh man! Great to hear.
Excellent video man. My issue was a wash cloth lodged inside hose. Washer over filled extra large capacity setting and too many clothes. When in spin cycle started the wash cloth was thrown overboard behind inner drum and sucked into hose!!!! There is just enough of a gap at the top of inner drum for something to be slung overboard
ok wow, my washer wasn't drying the clothes (turns out I now know it also wasn't really washing them haha) and I came to youtube after finding very little troubleshooting help online. I'm so glad I found your video - I had this exact issue!! I reattached the belt and it fell off again almost immediately. I can tell it's very worn out. I've ordered a replacement. thank you!!
I have the same unit, this video really helps! Thank you very much!!! I hope my situation is as easy to fix. 🤞🤞
Thank you boss, made all my stress go away and fixed in 10 mins. Thanks for the video
Dude, amazing video and thanks for posting. I was freaking out about a new washer/dryer or repair person... found several socks and undies, and it was my daughter's swimsuit that was the culprit for the belt coming off!
Thank you very much boss man ! Opened up my washer found about 20 socks & one tiny ball obviously was in my kids pocket found the belt on the floor slap that back on & washer is working perfect again thanks again man 👍🏼 👍🏼👍🏼
Glad it helped chief
Awesome video and a huge help! Only thing is that to take the front piece off you have to
Push the putty knife pretty hard into that crease/crack to loosen that front piece. Thanks!!!!
You did it!
Most videos do seem to blame the lid lock. But that was not my problem either.
The belt was fine. But there were tons of socks down there. I think they interfered with the thermo actuator thing and maybe knocked it out of wack. It was sitting kind of cock-eyed.
Also, the upper white teeth were not aligned with the grooves of the lower black teeth.
I was able to line everything up and it all worked fine. Hope it lasts.
But thank you very much either way! You did a great job.
Thank you for making this video, today I fixed my washing machine thanks to you, God bless you and Merry Christmas
Thank you for sharing this! This was exactly the problem, and I found 4 socks in the process.
Hi, Thank you for this video. It answered a step one question. Getting the cover off. And, very informative. Unclear about how to remove water from drain pump and hoses. Would like to clean below the agitator. Any videos on these things?
Man I sure appreciate your help you sure did save me money. The way you explained made it so easy to understand and also the way you explained. Thank you very much🎉🎉🎉👍🏽👍🏽
This was SO helpful!! I was able to cancel my appt with my repair guy and I'm back to doing laundry!! THANK YOU
Fantastic!
Thank you so much for showing us this video. It help me a lot.
Thank you for this! Followed your video. lo and behold, the belt had fallen off. Easy fix!
OMG this was my problem exactly, socks had piled up and dislodged the belt maybe. Thank you so much great video
Thank you, Thank you so much I fixed my washer last night took me all 10 minutes ❤😊🙏🏾
Thank You SO MUCH for this video, you saved me $250.00
In technician repair fees.
A baby sock got stuck in the drain pump which caused the thermal actuator to burn out. An easy repair and the part only cost me $25.
That's awesome. Thanks for sharing
How did you find the sock? I have a feeling that’s what I have going on
Thank you!! Fixed the washer and solved the sock mystery!
Thank you so much!!! This video just saved me money and time!!! You deserve to be crowned
I went through soooooo many videos, this is the one that saved me. thanks so much
Great to hear
Thank you for the information about this now I can find out if it’s the same issue with mine appreciate.
Thanks
It gave me a good starting point.
My case the drum wobbles to much hitting the back…
Will try the opening soon :)
Didn't fix my issue but seeing you the only one with the putty knife helped me not eff up the paint and damage clip with a fat screw driver like the tech videos
great video! I had the exact problem (except it was about a dozen socks) and the same solution. saved me a bunch of time by watching this!
lol I couldn't believe I had 6 socks in the bottom of mine
You ROCK!! That worked PERFECTLY! I have a washer again! Thank you soooo much!!!
Thank you so much. You saved me so much time and money in fixing this myself.
Thanks …… you totally helped me fix my machine, it was exactly what you described. Much appreciated you saved me some money!
Thank you so much ! I’m no man but was able to fix it following your instructions. I just had guests over for Thanksgiving and have tons of laundry to do so was panicking that it didn’t spin as it was my first load after they left.
I don’t have the type of knife you used in the video so I used the dinner strong knife and was able to open the front cover. And Yes! Found tons of socks and underwear. My 10’year son pointed out that they were from the previous owner lol Very helpful clip! Thanks again!
Great tip hear.
Thank you!! Putting the belt back on was not easy but I’m glad I was able to do this so maintenance wouldn’t have to see all those socks 😆
Thank you so much! It was the exact same problem except we had 32 socks and two pairs of underwear around the bottom from overloading…. Let that sink in lol. You’re a beast man, my wife was about to send me to Lowe’s to get a new washer and dryer unit.
Lol
Thank you soooo much for sharing this video. I just fixed my washer.
Thank you sir! This video just spared my family a major financial and time inconvenience.
Dude I can't thank you enough! We also found literally about 20 missing socks and underwear 😂
Lol
Dude ! I found my 10 mm socket ! 😂
🎉
hahaha that's probably where my socks are too lmao.
Thanks for the great tips! I had my washer fixed in minutes, all by myself! Now on to finish my laundry... 😄
Did you have difficulty putting the belt back on?
@@nicolecurtis8256 it wasn't too bad. I just wrapped it around one side and turned the pulley and it went right on. I do recommend wearing gloves because my hands turned black from the dirt and grease. Good luck to you!!
Thank you so much for great video it’s help me fix my washer and dryer
Thank you so much just received my stackable today and the belt was not connected now fixed
This video sure did help me out. Thank you
Thank you so much!! I just fixed our washer. The belt had fallen off.
Thank you so much man!. You just save me a couple dollars in repairs. Thank you again!
Thank you so much for making this video my band was off and I had no idea you probably save me a hundred or more
Awesome
I just fixed my washer! Thanks I appreciate it
You rock man! Thanks for a great video and explanation!
Great video thanks keep it coming💯💪🏾
Thank you so much for your video. You was-help me for put my wash machine working again.🎉😊
Perfect video and fixed my washing machine! Thank you!!
thank you sir for the informative and well filmed video! My issue is a little different than yours, but this helped point me in the right direction! P.S. It wasn't the lid lock... XP
Great Video! Fixed the issue. Thank you so much!
Not my favorite type of narration style but it’s as effective as they were in the early 2000s how its made series. Cheers
very straight to the problem i loved and clear images good angles
Worked like a charm!
Good looking out chief!
Got ya dawg