@@rogerjones7155 he’s explaining everything that he’s doing, so people can know what’s going on and not be confused. I prefer a man that talks too much rather than too little.
You rock, bro. I've been fixing stuff at home for a long time now, most repairs have been relatively easy but I'll tell ya - it often takes longer to find a video that is clear, fast and minus all the blah, blah, blah than it does to do the actual repair! You provide perfectly clear, easy to follow, easy to see directions with no ten minute intro featuring your dog. Not that I have a problem with people's dogs - I'm just here to learn something! The Repair Clinic video for this same fix instructs people to remove the case! Oh, my god, why? That's a huge waste of time. Also no need to detach the wiring harness, which they also advise, though at least that only adds a few seconds. I found it best for me to lay the washer down on its back. The rest was no sweat. I paid 8 bucks for the part, obviously up in price from 8 years ago. For people never doing it before, don't expect 10 minutes to fix, though. Took me an hour, but that includes cleaning the underside, gathering tools, setting up a light, disconnecting hoses, putting it all back. I call that a win. 8 bucks, one hour - thanks, man. I'll be checking your vids first in the future!
I'm a stay at home mother of 3, and because of your video I was able to diagnose and replace the coupling all by myself! I normally would have called a service repair guy and been charged out the butt. Thanks to you, I saved money and built confidence! Thank you!
LaCrisha Maner I want to do this. I seriously dont want to call a repair man. Im glad this is a easy 1-2-3 step video that I can stop and play at will as I go along fixing my washer. Thank u for this!
OMG! I know this video was published years ago, I just happened to come across it. This was the exact issue my Washing machine was having. I was ready to just scrap it and spend hundreds of dollars on a new one. My part cost a little more ($30), but I was able to get it today and swap it out thanks to this video. Chris, you are the man!!!! I'm now a subscriber.
I owe you at least one case of beer. I couldn't get a repair company to come out to fix our washer. We have three adults and one newborn baby in the house, we needed our washing machine. Your diagnosis was spot on. The Amazon part number was right. Your step-by-step instructions where also spot on. The only difference in my machine was that there were only clips and not bolts holding everything together. 10 minutes start to finish. Thanks Again!
Thanks for the vid, Chris. This is why it's awesome to have a back-catalog of your old stuff -- there are still a TON of these old Kenmore washers around, and they're increasingly likely to need this type of simple repair. This is why I've watched your channel go from barely 5 digits, to nearly 5 million subs.
Can't thank you enough. I know nothing about washing machines, but was able to fix my 19 year old machine. Working like new! It didn't however, take 10 minutes, but was well worth the time and effort.
My washer has been dead for a year. Ive had to go to the dreaded laundry mat since then. After watching this video I fixed my washer in less than ten minutes. Thank you so much.
Ok so I followed your video exactly. you explained everything so well. I can officially say I fixed my washer by myself..with some great directions from you of course lol. thanks!!!
I know you did this video tutorial 6 years ago but I just found it because I have the exact same model number washer & dryer as you do. Should I ever have this problem in the future, I have this to reference how to fix it. So far, the only thing I had to fix was the broken auger (the top part of the agitator) which was not spinning. That was one of the fastest and easiest fixes I've ever done on a washer. Like in this video, my repair only costed me $6.00. What needed replacing were the four dogs inside the auger. Only tool needed was a ratchet with a 7/16 socket on an extender. Thanks Chris for doing this fix.
Thank you so much for your video! I was able to fix my washer with your help. My coupler looked ok until I took it off. It was stripped out inside. But thanks to you demonstrating the sound a bad coupler makes, I proceeded with confidence. You were the only one who did demonstrate the sound of a bad coupler. Thanks again.
You probably will never see this comment but seriously THANK YOU FOR THIS!!! We have a baby due in two weeks and haven’t been able to laundry in a week. We just moved into a duplex so we’d have more space but had to buy our own washer and dryer. Could only afford a $135 used set and just about broke down because the washer wasn’t spinning. My husband followed this video and now it’s working like it’s brand new, seriously... I don’t think anyone would understand how much this has helped us 😫😫😫 I MEAN IT WAS A $5 FIX. WOW! THANK YOU
All ChrisFix videos are fluent and clearly explained. I have watched many of the car repair videos. I had this same exact problem with my washer and I have the same exact washer in the video lol. Watching this video was meant to be. Good stuff.
@@saif786salem No,nor have I ever. If I ever end up with a spare I'd like to tinker with the whole thing. I once bought a used washer off of Craigs List from a guy. When I came to his house his garage was full of washers. He refurbished them and made awesome money. Would be nice to know.
Thank you , this was the best video I’ve seen to fix this. I am a single mom and your video help me fix my own washer. No man wanted to fix it for me or they wanted to charge me $100 to fix, when the part was only $8 bucks on Amazon. Your easy step video was the truth!!! Thank you! ❤
I have that EXACT MODEL Washing Machine! I bought the coupler, took it apart and noticed that my Coupler WAS NOT DAMAGED. I changed it anyway. Then upon re-assembly I found the REAL PROBLEM: One of my Pump Retaining Brackets was Rusted and Brittle causing the Pump to dislodge from the Motor during the Spin Cycle which made the washer make that "same sound" when it's not turning. I'm getting another Pump Retainer Bracket tomorrow and my issue will be resolved. Thanks Chris for pointing me in the right direction!!!
OMG, you're AMAZING!!!! My daughter and I fixed our washing machine using this video! Our problem was exactly the same as in the video (right down to the noise it made), including how the piece broke! The video was easy to follow which saved us HUNDREDS of dollars (slight exaggeration). Who needs Geico when you have ChrisFix (not the best analogy, but you get the gist of what we're saying). THANK YOU!!!
Thank you so much, I watched your video, ordered the part, came home from work this morning, and salvaged my dead washing machine in less than a half hour. Greatly appreciate your channel.
Well done sir! Worked just like you demonstrated and saved me a bundle! I’m not that handy and yet, your video gave me enough confidence to get the job done. Thank you.
"It's a 2 dollar part!" "It's a 5 minute job!" "Let me show you how to replace it now that we've identified the problem" Great video bro! It's quick and to the point.
My washing machine just had this problem. Been following you for while. Never thought you made a washer video. You were the first video when I searched. Has worked so far, just waiting on the part to come in. And yes the jack stands are holding my machine up.
Such a thorough lesson for us all, always with your calming "You got this" tone and visuals that are so beneficial to the mechanically impaired. Thank you!
This was the most efficient and effective video I've found on replacing the washer coupler. Thank you so much for recording the sound of the non-agitating washer. Additionally, yours is the only video of the replacement process I saw that did not involve someone coming back from a recording break and commenting about the motor removal being more complicated than expected. Removing the motor from the mount was easy for me because your instructions were spot on. Thanks again!
Gagik Ginosyan they are the best and easiest to work on . The new ones are nothing like these so hold on to these old whirlpool/ Kenmore / roper washing machines if you have them. They are truly the best you can get these days 👍👍
Great/perfect instructions. Mine was a tight fit, both ends, so instead of hammering on the cogs with a rubber mallet I found a large socket ( spark plug socket) that fit in the center and tapped on it. Thanks for the close-up photos and you were right only about 10 minuets to do the job. Of course, add another 20 to find the tools, something nice and soft to lay/kneel on and moving the machine!
Thank you for this tutorial! I diagnosed the problem, bought the part, and installed it thanks to you! The Kenmore is working like a champ now. I had problems getting the pump off and reinstalling the steel clips. Otherwise, it worked as you described. 👍👍👍👍👍
Hey Chris---Followed your directions on this coupler repair---was a little tedious with my big hands but washer is working better than ever---Thank You and God Bless !!!
Thanks man! One video had me trying to take the shell off first. I was like, What a pain in the ass. Has to be an easier way... Found your vid. Jack stand and a straight screedriver, DONE! Lol, I didn't need the 1/4. Apparently this machine was worked on before because they didn't put those back in! Hah Keep creating brotha!
Embarrassed to say it but my washer has been down for three years ( I live alone and we have laundry in the park) and I watched your vid, got out my jackstand, took it apart, and sure enough, you were right. Little teeny broken plastic thing. Gotta run over to the appliance parts place tomorrow and put it back together. You really are amazing!!
Yep thanks for the video taught me a thing or two before forking out a fortune to the repair guy. He gave me heavy quote l almost bought a new machine to replace it. Thanks once again
Glad I took the cabinet off my washer before I watched this. Now I get more time to appreciate this video while I remount that. And then I get to replace my coupler.
Thanks! I am going to order the part right now. I have a jack stand in the basement because my son left it there many years ago. Thanks again. I am a 69 year old female. You make it look not too difficult. I love the way you explain as if you are talking to a novice. Some people know their stuff but don't know how to teach it to others. Great work. I hope this works for me. I will update when I am done.
@@SwagJaws It works fine now. I used the jackstand and but I didn't have to purchase the part. I removed both hoses from the motor/filter. I couldn't see any obstruction so I blew on the hoses. The one that goes to the outside drain hose, had some resistance and I blew until there was none. I reassembled the unit and it works great. Thanks.
@ChrisFix - You taught me car repair and gave me the confidence to do so much more than I ever thought I'd be able to do on my own in my very own driveway, but I must admit - I never ever would've thought you'd show me how to fix my washing machine as well. From the bottom of my heart - THANK YOU!!
You have an excellent way of explaining everything like saying it doesn't matter which way the coupler connects to the motor because I know I would have spent half the day looking for that little bit of information that you mentioned. That definitely deserves a sub!
Completed the job in 10 minutes after watching this video. Washer now spinning, and wife happy and thinks I'm a mechanical genius. THANKS AGAIN, CHRIS! Suggestion #1: When tapping the couplers on the shafts, I used a large socket (larger than the shaft) straddled the shafts and tapped the socket with the rubber mallet, rather than the white plastic couplers themselves to prevent maybe breaking off one of the nubs. Suggestion #2: As for the part, consider getting the updated version, 285753 which has a metal insert, ostensibly stronger and less likely to get chewed up and round out like the original version. Part prices currently (re: 2022 inflation) now range from about $7 for aftermarket to as much as $47 for OEM. crazy. Still cheaper than an hour of labor by from a service tech.
Thank you for this video, it was awesome!!! My Dad and I just fixed our machine. Not sure where you are but here in Ontario Canada our part cost us $ 27.58 😬 but hey better that than a $900 on a new machine!
I would sincerely like to thank you for this CLEAR and EASY to follow tutorial! Replacement part came in the same day and now my clothes are being washed, as we speak. Once again, THANK YOU!
I don’t comment on UA-cam often but I had to say thank you for your video. It was spot on and I’m back up and running. $20 for the Amazon part with next day shipping. Beats a $200 repairman visit
Hey Chris! I forgot to thank you for this one, saved me tons of money instead of trashing my old washing machine I found your vid and knew it would be a good fix. Mine had the exact same problem, just my motor was in a different location but it turned out to be such a simple fix, and I can keep my washer longer now! Thanks so much man!
@@CatAttack6471 lol XD his voice it's very smooth and satisfying I enjoy his videos because they're more detailed and more understandable than others youtubers I've seen
@@mwatkins2464 I didn't say men specifically I just said people it depends on a lot of different variables. I just tried to compliment that he has a nice voice and now this.
Thank you sooo much for helping save this 50+ year old woman in California $200 service call for an $8 part in 2022 with some sweat equity, and some bandaids bcuz I was walked through with another video how to take off cabinet on a 25 year old work horse if a washer I love &was gonna spend $500+ to replace If I could not fix. Next time for any of the other parts I may have to replace I am totally doing the tipping&jack stand thingy for sure. Thanks Chris!!!!
I've been watching your videos for over 5 years. My sister actually was the one that mentioned watching them as she saw your videos on how to super clean the windshield. I work on family and friends vehicles and she knew your content would be something I would enjoy watching and very informative. I haven't missed one since. Though I can't believe I never stumbled across this one with the washer repair. I have a front loader now, but I remember working kenmore machines with my dad back in the day and changing these couplers. Wish we thought of a jack stand used a cinder block. Lol Still watched regardless of what's being fixed. I remember when the videos were labeled for difficulty and other changes. I'm glad you keep your older content, it's nice to go back and watch from time to time.
I was able to fix my mom's washing machine thanks to this video. We waited 2 weeks for the part. And the plastic part was metal in the middle which made it more difficult to hammer on. I just replaced one of the broke plastic piece with the new metal one and replaced the rubber piece and it is washing now.
Great guide. My old school whirlpool's rubber bit in the coupler shaved itsself a bit so i cleaned it an aligned it back up. It's still working but not for long so I ordered my part and just looked this up to see what I was doing. Straight forward and because of ChrisFix I may use AC Delco stands to hold it up XD
those $2 parts will usually break in a year or 2. to buy one locally you're looking at $18 or so. mine is a whirlpool and the OEM parts for it are about $8 on ebay.
The farther back you can lay over the machine, the easier it will be w/o having to remove the cabinet. Beyond 45º worked well. The weight of the motor will assist in re-seating the motor to the transmission. I used a dab of dishwashing liquid on the plastic tabs of the coupler to make it easier to slide the motor onto the seated coupler in the transmission. A rubber mallet is a must. Not quite the "5-minute job" Chris billed it to be, but still HUGE cudos to him for providing this video and enabling me to avaoid a call to the Maytag [in this case, Kenmore] repair man! Thanks, Chris!
yes, but then you'd want to remove the H and C supply hoses and the drain hose. So instead put a bucket or paint can BEHIND the machine when tilting it back so you don't have to take off the hoses etc.
Another important reason NOT to lay the washer entirely down on the floor-there’s a vent hole on the top surface of the gear case and it can leak oil. It is nearly impossible to refill this oil and a new gear case is big bucks$.
As described! What an excellent and informative tutorial. EVERYTHING was exactly the deal.... right down to vacuuming around the dust around the bottom of the appliance. Thank you so much for bothering to do this. From Manitoba, Canada! :)
Wife got the part, looked at video several times, instructed me and fixed for $5. Took us much longer but well worth effort. Couldn’t have done on our own. Thanks.
Thank you!! I've got to see if I can find the part but this sound exactly like my issue. Whether this does or does not fix my issue, wanted you to know that I think you did a great job with making this video. It's very clear, understandable and you make sure we get a good look at the parts on the machine.
Here is my challenge to all the readers. Please find me a bad video posted by Chris. I bet you can't! He is the gold standard by which other videos on youtube needs to be judged.
12vgs8606 Thanks man! I try hard not to make any bad videos and if there is a problem with one of them, I take it down and adjust it (which has only happened 2 times for a part that got confusing that I had to make more clear).
Omg, you're the best. I could not figure out how to take the machine's case, this was a quick fix, but the motor was a ton, so be mindful when taking it off and putting it back on.
On the one hand you made that look way easier than it was! 😅 On the other hand, and more importantly, this video was a life saver! Well shot with clear closeups - nicely done!
Washer motor coupler video was spot on. Much simpler, straightforward than other videos. My wife thanks you too ! Aloha
Thanks a lot!
great video im 78 yrs old (young) lady i did it all by myself thanks chris
You give me such confidence....just hope with as old as a washer I have I can find the part(s)
You go girl! I fixed mine too!
He talked to much
@@rogerjones7155 he’s explaining everything that he’s doing, so people can know what’s going on and not be confused. I prefer a man that talks too much rather than too little.
All i need is new parts then im all set?!😁👽😁
You rock, bro. I've been fixing stuff at home for a long time now, most repairs have been relatively easy but I'll tell ya - it often takes longer to find a video that is clear, fast and minus all the blah, blah, blah than it does to do the actual repair! You provide perfectly clear, easy to follow, easy to see directions with no ten minute intro featuring your dog. Not that I have a problem with people's dogs - I'm just here to learn something! The Repair Clinic video for this same fix instructs people to remove the case! Oh, my god, why? That's a huge waste of time. Also no need to detach the wiring harness, which they also advise, though at least that only adds a few seconds. I found it best for me to lay the washer down on its back. The rest was no sweat. I paid 8 bucks for the part, obviously up in price from 8 years ago. For people never doing it before, don't expect 10 minutes to fix, though. Took me an hour, but that includes cleaning the underside, gathering tools, setting up a light, disconnecting hoses, putting it all back. I call that a win. 8 bucks, one hour - thanks, man. I'll be checking your vids first in the future!
Nice work and glad the video was helpful!
$8.00 part ...
2 day wait from Amazon...
20 minute total repair.
Priceless!
Thanks Chris!!!
Jennifer Wagaman : what is the name of the part you ordered from Amazon? Is it just a coupler?
@@adamssmp 4 years later... but the link is in the description.
I'm a stay at home mother of 3, and because of your video I was able to diagnose and replace the coupling all by myself! I normally would have called a service repair guy and been charged out the butt. Thanks to you, I saved money and built confidence! Thank you!
LaCrisha Maner Lol mums nowadays
LaCrisha Maner
LaCrisha Maner q)
LaCrisha Maner I want to do this. I seriously dont want to call a repair man. Im glad this is a easy 1-2-3 step video that I can stop and play at will as I go along fixing my washer. Thank u for this!
Super cool - save time and money and get some satisfaction.
OMG! I know this video was published years ago, I just happened to come across it. This was the exact issue my Washing machine was having. I was ready to just scrap it and spend hundreds of dollars on a new one. My part cost a little more ($30), but I was able to get it today and swap it out thanks to this video. Chris, you are the man!!!! I'm now a subscriber.
Great job with the camera angles and editing. 2 of the most underappreciated elements of a great fix-it video. Thanks for the effort!
haha, only chrisfix uses jackstands on his washing machine
lmfaooo
Google make me laugh
You made me laugh so hard, I can't take it anymore!!!
He didn’t give us torque specifications?
This is how a car mechanic fixes his washing machine.
I owe you at least one case of beer. I couldn't get a repair company to come out to fix our washer. We have three adults and one newborn baby in the house, we needed our washing machine. Your diagnosis was spot on. The Amazon part number was right. Your step-by-step instructions where also spot on. The only difference in my machine was that there were only clips and not bolts holding everything together. 10 minutes start to finish. Thanks Again!
We will soon see a new video starting off as “hey guys Chris fix here today we will be engine swapping and turbocharging this here washer”
Lol
Washer go Brrrr
Oh man gonna do the laundry under 10 minutes
Your clothes will come out all torn, 😂 😂
Thanks for the vid, Chris. This is why it's awesome to have a back-catalog of your old stuff -- there are still a TON of these old Kenmore washers around, and they're increasingly likely to need this type of simple repair.
This is why I've watched your channel go from barely 5 digits, to nearly 5 million subs.
Can't thank you enough. I know nothing about washing machines, but was able to fix my 19 year old machine. Working like new! It didn't however, take 10 minutes, but was well worth the time and effort.
I wish I had seen this before I gave away a 1200 dollar washer lol
If it was a front load washer then it’s different.
Don’t kick yourself. Doesn’t always work. Sometimes machines are just crap.
January 2024, this video is still helping people. Thank you
My washer has been dead for a year. Ive had to go to the dreaded laundry mat since then. After watching this video I fixed my washer in less than ten minutes. Thank you so much.
I bet that can hold a whole bunch of soapy wooder.
Fosty plenty blinker fluid
😂😂😂
😂😂😂😂😂😂😂
Ok so I followed your video exactly. you explained everything so well. I can officially say I fixed my washer by myself..with some great directions from you of course lol. thanks!!!
Awesome!!! Glad the video was helpful and nice work!
briana vega nice!!!
ChrisFix
briana vega i like your surname, it reminds me of AMDs Vega GPU
briana vega you think I should get a Vega 64 or wait for Volta/navi?
I know you did this video tutorial 6 years ago but I just found it because I have the exact same model number washer & dryer as you do. Should I ever have this problem in the future, I have this to reference how to fix it. So far, the only thing I had to fix was the broken auger (the top part of the agitator) which was not spinning. That was one of the fastest and easiest fixes I've ever done on a washer. Like in this video, my repair only costed me $6.00. What needed replacing were the four dogs inside the auger. Only tool needed was a ratchet with a 7/16 socket on an extender. Thanks Chris for doing this fix.
$110.00 dollar repair, done for $8.00. I owe you a couple beers bro. Thank you!!
U owe me one too. Because I commented
First time seeing him not working on a car 😂
Trandmittion moter waterpump sounds kinda like a cat
He even taught us how to make a knife too
instaBlaster.
Same
Same
Thank you so much for your video! I was able to fix my washer with your help. My coupler looked ok until I took it off. It was stripped out inside. But thanks to you demonstrating the sound a bad coupler makes, I proceeded with confidence. You were the only one who did demonstrate the sound of a bad coupler. Thanks again.
You probably will never see this comment but seriously THANK YOU FOR THIS!!! We have a baby due in two weeks and haven’t been able to laundry in a week. We just moved into a duplex so we’d have more space but had to buy our own washer and dryer. Could only afford a $135 used set and just about broke down because the washer wasn’t spinning. My husband followed this video and now it’s working like it’s brand new, seriously... I don’t think anyone would understand how much this has helped us 😫😫😫 I MEAN IT WAS A $5 FIX. WOW! THANK YOU
That is awesome
He is the #1 car channel on UA-cam. He is a lot more energetic now though. Glad your washer is working. 👍👍
Congrats on having a baby! My wife and i have been trying, i hope your little human is happy and healthy 😊
What's the part name
4 years late, but congratulations. I hope toddler, mommy and you are well ✌🏽
Voice: good & clear
Lightning: good
Instructions: easily understood
= like.
Devon Wright ikr i hate when fixing videos has a loud overused music
All ChrisFix videos are fluent and clearly explained. I have watched many of the car repair videos. I had this same exact problem with my washer and I have the same exact washer in the video lol. Watching this video was meant to be. Good stuff.
Hey does anybody have a video on how to change the drive belt on a Kenmore top load washer
@@mcleb84 hey mike you have a video on how to change drive or belt on a Kenmore top load washer
@@saif786salem No,nor have I ever. If I ever end up with a spare I'd like to tinker with the whole thing. I once bought a used washer off of Craigs List from a guy. When I came to his house his garage was full of washers. He refurbished them and made awesome money. Would be nice to know.
Thank you , this was the best video I’ve seen to fix this. I am a single mom and your video help me fix my own washer. No man wanted to fix it for me or they wanted to charge me $100 to fix, when the part was only $8 bucks on Amazon. Your easy step video was the truth!!! Thank you! ❤
Instructions unclear, removed the engine from my car.
HerrHabe HAHAH
HerrHabe LoL 😂
Lol!
Chrisfix only not fix cars but fix washing machines as well
(2019 anyone)
EDIT : Whohh thanks for 215 likes❤
It's 2014 when it post but I didn't know he make this vid
2019 and please stop those fucking "2019 anyone"
Ok dam
Me
Me
You just saved me a bunch of money. I found the part for $18, and it took me about fifteen minutes to fix, but it's working like a champ.
I'm glad the video saved you some money!
I have that EXACT MODEL Washing Machine! I bought the coupler, took it apart and noticed that my Coupler WAS NOT DAMAGED. I changed it anyway. Then upon re-assembly I found the REAL PROBLEM: One of my Pump Retaining Brackets was Rusted and Brittle causing the Pump to dislodge from the Motor during the Spin Cycle which made the washer make that "same sound" when it's not turning. I'm getting another Pump Retainer Bracket tomorrow and my issue will be resolved. Thanks Chris for pointing me in the right direction!!!
OMG, you're AMAZING!!!! My daughter and I fixed our washing machine using this video! Our problem was exactly the same as in the video (right down to the noise it made), including how the piece broke! The video was easy to follow which saved us HUNDREDS of dollars (slight exaggeration). Who needs Geico when you have ChrisFix (not the best analogy, but you get the gist of what we're saying). THANK YOU!!!
Thank you so much, I watched your video, ordered the part, came home from work this morning, and salvaged my dead washing machine in less than a half hour. Greatly appreciate your channel.
I like how you don’t only work on cars but other things too
Thanks Saul! Anything to help people!
Honda push mower carburetors for sale
@@chrisfix You are a great guy
Well done sir! Worked just like you demonstrated and saved me a bundle! I’m not that handy and yet, your video gave me enough confidence to get the job done. Thank you.
You rock!!! 🎉
9 yrs later… and your video is still the best ever! Fixed mine thanks to you!
Thank You! ❤
Glad the video is still helping millions of people!
"It's a 2 dollar part!"
"It's a 5 minute job!"
"Let me show you how to replace it now that we've identified the problem"
Great video bro! It's quick and to the point.
On these days with 2 dollars you only can get a bolt and small size nut,
It took more than 15minutes to raise up the washer, by yourself along.
thanks Chris. Wish I had watched this before I took the entire washer apart!!
Thank you. It took my son 20 minutes to complete this repair. Im on Social Security, The savings is really appreciated.
Who would've thought I would be watching ChrisFix on how to fix my washer. lol
Me: ooh a chris fix video
*looks at title*
Me: huh interesting
I thought it was someone else but then I saw a mustang.
@@daniyalahmedkhan5504 same
My washing machine just had this problem. Been following you for while. Never thought you made a washer video. You were the first video when I searched. Has worked so far, just waiting on the part to come in. And yes the jack stands are holding my machine up.
Such a thorough lesson for us all, always with your calming "You got this" tone and visuals that are so beneficial to the mechanically impaired. Thank you!
This was a pleasant surprise. I am so used to you working on cars Chris. Nice video.
This was the most efficient and effective video I've found on replacing the washer coupler. Thank you so much for recording the sound of the non-agitating washer. Additionally, yours is the only video of the replacement process I saw that did not involve someone coming back from a recording break and commenting about the motor removal being more complicated than expected. Removing the motor from the mount was easy for me because your instructions were spot on. Thanks again!
Nobody:
Chrisfix: wanna learn how to fix a washing machine?!
Everybody: Hell yeah
i had this on my old washer, great design and these machines last a while
Gagik Ginosyan they are the best and easiest to work on . The new ones are nothing like these so hold on to these old whirlpool/ Kenmore / roper washing machines if you have them. They are truly the best you can get these days 👍👍
@@mwatkins2464 it's too lateee women like new looking one. There gone.. 😭 had good run tho
Great/perfect instructions. Mine was a tight fit, both ends, so instead of hammering on the cogs with a rubber mallet I found a large socket ( spark plug socket) that fit in the center and tapped on it. Thanks for the close-up photos and you were right only about 10 minuets to do the job. Of course, add another 20 to find the tools, something nice and soft to lay/kneel on and moving the machine!
Just had this exact issue with our kenmore. Thanks to your video, problem solved. Thank you Chris
Glad it helped
Just visiting from LTT’s UA-cam charging for 4K video 😛
Thank you for this tutorial! I diagnosed the problem, bought the part, and installed it thanks to you! The Kenmore is working like a champ now.
I had problems getting the pump off and reinstalling the steel clips. Otherwise, it worked as you described. 👍👍👍👍👍
Wonder if hes ever going to do a chrisfix relationship. Lol
Duct tape and flowers fix everything.. and microfiber towels
Just got in an argument over our washer
You know what they say, OUT WITH OLD, IN WITH THE NEW!
@@robertm5969 😨😝 NO MICROFIBER!!! Icky!
Flextape can't fix that.
Not only ChrisFix is a Car Mechanic, but he is also a household mechanic. 🙂
Hey Chris---Followed your directions on this coupler repair---was a little tedious with my big hands but washer is working better than ever---Thank You and God Bless !!!
Thank you I watched your video and it got me laid.
Thanks, I had to explain to people why I all of sudden started laughing out loud in a very quiet place
ohnorickyo lmao
ohnorickyo lol good for u
jennifer youth lllpppppppppppppppppp]]]
Changing belt in a Hoover front loading washing machine
Thanks!! Best video I could find for fixing my washing machine. Instructions worked perfectly. Very detailed. Excellent instructional video!
I speak for a lot of people when I say thank you for making this video.
Omg, thank you thank you, this is a Great video i fix my own washer, im so happy i didn’t have to buy a new washer
I thought you only worked on cars Lmao.
Newbie1445 Roblox if you fix cars you can fix anything
Newbie1445 Roblox
If it involves a motor, then you can fix those types of machines to your liking.
@@williamgrayson4181 pretty much!,even your own tools!
This exact video helped me greatly to diagnose and fix mine about 6 years ago. Still running. Forever grateful. Thank you.
Thanks.for the advice I'm 82 year old woman and got it fixed with your good help
Thanks man! One video had me trying to take the shell off first. I was like, What a pain in the ass. Has to be an easier way...
Found your vid. Jack stand and a straight screedriver, DONE!
Lol, I didn't need the 1/4. Apparently this machine was worked on before because they didn't put those back in! Hah
Keep creating brotha!
Can we take a minute to appreciate that Chris is helping us less informed people fix our appliances and OUR CARS?
jack stand! lol awesome
MrRangerZr1 Haha thanks!
Oh you dont just fix cars you fix washing machines.....
Anything to help people! It’s so easy to do and is such a common problem I wanted to
show how to fix it!
Embarrassed to say it but my washer has been down for three years ( I live alone and we have laundry in the park) and I watched your vid, got out my jackstand, took it apart, and sure enough, you were right. Little teeny broken plastic thing. Gotta run over to the appliance parts place tomorrow and put it back together. You really are amazing!!
He is whats is known as a jack of all trades and a master of none, (guessing on the master of none part).
Yep thanks for the video taught me a thing or two before forking out a fortune to the repair guy. He gave me heavy quote l almost bought a new machine to replace it. Thanks once again
ChrisFix thank you really helps me 🏋🏻♂️
Glad I took the cabinet off my washer before I watched this. Now I get more time to appreciate this video while I remount that. And then I get to replace my coupler.
Great job of explaining this for non-mechanics! We're going to try it! :-)
+Catherine “Cat” Bishir Thanks!
g E top load washer
@ChrisFix : Great job Chris. thanks
0:57
"I'ma use a jack stand"
hahaha you mechanic you
Andy Plater Haha, yep!
It works like a charm!
Thanks! I am going to order the part right now. I have a jack stand in the basement because my son left it there many years ago. Thanks again. I am a 69 year old female. You make it look not too difficult. I love the way you explain as if you are talking to a novice. Some people know their stuff but don't know how to teach it to others. Great work. I hope this works for me. I will update when I am done.
@@rippygirl423 Hey how did the repair go?
@@SwagJaws It works fine now. I used the jackstand and but I didn't have to purchase the part. I removed both hoses from the motor/filter. I couldn't see any obstruction so I blew on the hoses. The one that goes to the outside drain hose, had some resistance and I blew until there was none. I reassembled the unit and it works great. Thanks.
Very helpful video. I don’t know why so many other channels don’t even include the sound or at least a description of the sound.
Thank you.
“Does your washer not spin and sound like this?”
Me: OH MY GOD 😱
Yes
Literally!!
exactly!!
@ChrisFix - You taught me car repair and gave me the confidence to do so much more than I ever thought I'd be able to do on my own in my very own driveway, but I must admit - I never ever would've thought you'd show me how to fix my washing machine as well. From the bottom of my heart - THANK YOU!!
You have an excellent way of explaining everything like saying it doesn't matter which way the coupler connects to the motor because I know I would have spent half the day looking for that little bit of information that you mentioned.
That definitely deserves a sub!
Something breaks in my house.....I say drat!!
Something breaks in Chris's house.....He says Ka Ching!!
Whoa whoa whoa hold on, where's the jack ? Where's the torque wrench ?
And the thread locker
@@billykaelin6358 😂thats what I was thinkin!
Completed the job in 10 minutes after watching this video. Washer now spinning, and wife happy and thinks I'm a mechanical genius. THANKS AGAIN, CHRIS!
Suggestion #1: When tapping the couplers on the shafts, I used a large socket (larger than the shaft) straddled the shafts and tapped the socket with the rubber mallet, rather than the white plastic couplers themselves to prevent maybe breaking off one of the nubs.
Suggestion #2: As for the part, consider getting the updated version, 285753 which has a metal insert, ostensibly stronger and less likely to get chewed up and round out like the original version.
Part prices currently (re: 2022 inflation) now range from about $7 for aftermarket to as much as $47 for OEM. crazy. Still cheaper than an hour of labor by from a service tech.
Thank you for this video, it was awesome!!! My Dad and I just fixed our machine. Not sure where you are but here in Ontario Canada our part cost us $ 27.58 😬 but hey better that than a $900 on a new machine!
I would sincerely like to thank you for this CLEAR and EASY to follow tutorial! Replacement part came in the same day and now my clothes are being washed, as we speak. Once again, THANK YOU!
I don’t comment on UA-cam often but I had to say thank you for your video. It was spot on and I’m back up and running. $20 for the Amazon part with next day shipping. Beats a $200 repairman visit
Hey Chris! I forgot to thank you for this one, saved me tons of money instead of trashing my old washing machine I found your vid and knew it would be a good fix. Mine had the exact same problem, just my motor was in a different location but it turned out to be such a simple fix, and I can keep my washer longer now! Thanks so much man!
Can you do a video of putting a turbo on a washing machine? Those poop stains will fly right out of those underwear.
no, he should super charge it, superchargers dont have lag
And 7 years later this video still saving people money. God bless you and thanks!
Jus feel around for the hole 😉
You'll find it @ some point 😊
"It goes on one way, but It doesn't matter which side" -chrisfix 3:50
John Smith I noticed that too 😂
@@CatAttack6471 lol XD his voice it's very smooth and satisfying I enjoy his videos because they're more detailed and more understandable than others youtubers I've seen
@@mwatkins2464 don't most people though?
John Smith no most men don’t at all !!! ☹️🙁😟
@@mwatkins2464 I didn't say men specifically I just said people it depends on a lot of different variables. I just tried to compliment that he has a nice voice and now this.
Thank you sooo much for helping save this 50+ year old woman in California $200 service call for an $8 part in 2022 with some sweat equity, and some bandaids bcuz I was walked through with another video how to take off cabinet on a 25 year old work horse if a washer I love &was gonna spend $500+ to replace If I could not fix. Next time for any of the other parts I may have to replace I am totally doing the tipping&jack stand thingy for sure. Thanks Chris!!!!
I've been watching your videos for over 5 years. My sister actually was the one that mentioned watching them as she saw your videos on how to super clean the windshield. I work on family and friends vehicles and she knew your content would be something I would enjoy watching and very informative. I haven't missed one since.
Though I can't believe I never stumbled across this one with the washer repair. I have a front loader now, but I remember working kenmore machines with my dad back in the day and changing these couplers. Wish we thought of a jack stand used a cinder block. Lol
Still watched regardless of what's being fixed. I remember when the videos were labeled for difficulty and other changes. I'm glad you keep your older content, it's nice to go back and watch from time to time.
Yay I fixed it myself! The trick is making sure it's pushed back far enough so you have easy access to the bottom side.
I was able to fix my mom's washing machine thanks to this video. We waited 2 weeks for the part. And the plastic part was metal in the middle which made it more difficult to hammer on. I just replaced one of the broke plastic piece with the new metal one and replaced the rubber piece and it is washing now.
2020 anyone?
Broke in 2019 but finally getting to it now 2020.
Ha! Pretty much. My spare finally broke so I fixed my good one 2 years later
Great guide. My old school whirlpool's rubber bit in the coupler shaved itsself a bit so i cleaned it an aligned it back up. It's still working but not for long so I ordered my part and just looked this up to see what I was doing. Straight forward and because of ChrisFix I may use AC Delco stands to hold it up XD
Me
Same spare broke fix original today. It broke 2 years ago lol
Just picked up the part at Sears......$23.72 with tax....2016 price. A savings of well over $150.00
those $2 parts will usually break in a year or 2. to buy one locally you're looking at $18 or so. mine is a whirlpool and the OEM parts for it are about $8 on ebay.
Jorge Rodriguez they all come with the metal part now. the cheap ones and the OEM ones. the last one I bought was a whirlpool part and it had it
5$ on amazon
Your video on washer coupling repair was superb! The detailed explanations, video, lighting, specifics on part numbers were professorial!
The farther back you can lay over the machine, the easier it will be w/o having to remove the cabinet. Beyond 45º worked well. The weight of the motor will assist in re-seating the motor to the transmission. I used a dab of dishwashing liquid on the plastic tabs of the coupler to make it easier to slide the motor onto the seated coupler in the transmission. A rubber mallet is a must. Not quite the "5-minute job" Chris billed it to be, but still HUGE cudos to him for providing this video and enabling me to avaoid a call to the Maytag [in this case, Kenmore] repair man! Thanks, Chris!
Can you just lay it down on its back completely? And work from the bottom?
yes, but then you'd want to remove the H and C supply hoses and the drain hose. So instead put a bucket or paint can BEHIND the machine when tilting it back so you don't have to take off the hoses etc.
Another important reason NOT to lay the washer entirely down on the floor-there’s a vent hole on the top surface of the gear case and it can leak oil. It is nearly impossible to refill this oil and a new gear case is big bucks$.
Excellent video! Clear instructions, nice camera work, and a complete job A-Z. Thanks!
Just fixed my Kenmore using your video. Thanks it runs perfect and I have spare parts
As described! What an excellent and informative tutorial. EVERYTHING was exactly the deal.... right down to vacuuming around the dust around the bottom of the appliance. Thank you so much for bothering to do this. From Manitoba, Canada! :)
Wife got the part, looked at video several times, instructed me and fixed for $5. Took us much longer but well worth effort. Couldn’t have done on our own. Thanks.
Nice work! Glad the video was helpful!
Found this video 7 years after it was made lol. Think this is the problem im having and about to give it a shot. Wish me luck lol
Thank you!! I've got to see if I can find the part but this sound exactly like my issue. Whether this does or does not fix my issue, wanted you to know that I think you did a great job with making this video. It's very clear, understandable and you make sure we get a good look at the parts on the machine.
Here is my challenge to all the readers. Please find me a bad video posted by Chris. I bet you can't! He is the gold standard by which other videos on youtube needs to be judged.
12vgs8606 Thanks man! I try hard not to make any bad videos and if there is a problem with one of them, I take it down and adjust it (which has only happened 2 times for a part that got confusing that I had to make more clear).
Omg, you're the best. I could not figure out how to take the machine's case, this was a quick fix, but the motor was a ton, so be mindful when taking it off and putting it back on.
Thank you so much for your video it help me solved my problem and saved me from getting a new washer...
+nkuajsuab awesome!
My washer is doing the same thing, I'm going to get that part right now! Thanks!
When u find chriss hidd3n washing machine fetish
Thank you Chris, you saved me a ton of money on repairs. As out of shape and unskilled as I am, I was still able to get the job done, and it works!
On the one hand you made that look way easier than it was! 😅 On the other hand, and more importantly, this video was a life saver! Well shot with clear closeups - nicely done!