enjoyed this series and just wanted to put some positive comments down, really respect a man who can do this all by himself, its a lot of work, especially when you do the videos and tell us what you are doing to help us all out, much appreciated
that is a real nice Caprice Brougham!!!! When I did my last engine swap I used to live on a hill and I knocked the plastic plug off the end of my 700 R-4 tranny fluid ran all the way down the hill and all over my shoes. Never fails to happen with trans fluid!
Calvin Dubois that’s what I’m thinking about doing next. Been eyeing a box coupe for a few weeks now. If I don’t get this SS, I’m def getting that coupe. Gonna go with the 4.8 though 😎
Is that an 70 chevelle under the tarp...I do my swaps single handed too homie....good work ....atf puddles are inevitable....my nova took about 6 months my c10 I had done In 1 month...trucks are easy
Great Job. I have a 85 box Chevy Impala. I want you to a ls swap for me. How much do you charge for everything? I’m in Baton Rouge, La so I’m not that far from you.
Question... I have a 89 Box and putting a LS3 6.2L with the transmission that came with it. I'd like to know which site did you go to as far as the purchase for the motor mount and transmission cross member? Thank you.
Just have a question what kind of manifold are headed the name of them did you use for your bill because I have a 86 Caprice I am trying to drop my LS but don't want to cut on the frame
Question what vehicles have the ls motors u swapping out of is it yukon or tahoe,or Corvette motor?and do u replace the transmission outta the box our is it universal?
I'm not sure how but I seen them do it on Chevy you can get whole nose off fenders in one hit. Making it wonderful to get at everything. Before Ls, Chevy had corvette lt1 I'm going that route. I got long ways to learn.
What kind of headers you use on your LS swap I am having a hard time trying to find some call Summit Racing they said that ones that they had will not fit a b-body they will fit a El Camino so is no the ones that I get
Got a question Bruh did you use the stock LS harness or call aftermarket harness? I don't know what would be better drive by wire or drive by cable what would you recommend doing for 84 Box Chevy? Your help would be greatly appreciated Bruh
@@SouthernChevyTv will there be a issue if I used a 4L60e transmission the motor and transmission came out of a 2000 Tahoe 5.3.i want to use the transmission 2 I just don't know what I need to make everything work as I want it 2.thanks in advance Bruh
@@SouthernChevyTv last thing do I need brake pedal 2 disengage the torque converter people been telling me I needed it because the converter won't disengage without it saying I needed wiring harness from the pedal 2 I'm just trying 2 clearify some things sorry for so many questions Bruh
💥💥💥💥What kind of transmission did your Brougham come with from the factory a 200R4 or is that a 700R? An if it did come with a 200R4 what modifications did you. Need to perform to install of the 4L60E...please elaborate clearly...Mines has a 200R4 in it from the factory... Its causing me doubt doing the LS SWAP😣😣😣
enjoyed this series and just wanted to put some positive comments down, really respect a man who can do this all by himself, its a lot of work, especially when you do the videos and tell us what you are doing to help us all out, much appreciated
gReGsKi GmAiL thanks homie it’s another series now on painting Ruby now bro look out for it I’m 2 videos in now
All them fluids in that driveway...catch can man. You still my boy keep doing what you doing.
Damn man, you dropped that thing in from intake to oil pan lol. All you were missing was the harness. Good shit bro.
that is a real nice Caprice Brougham!!!! When I did my last engine swap I used to live on a hill and I knocked the plastic plug off the end of my 700 R-4 tranny fluid ran all the way down the hill and all over my shoes. Never fails to happen with trans fluid!
Dammmm Bro great job especially by yourself 💪💪👍👍👍👍And your right not rushing is best way!!
All I need is One Mic well One Hoist. Super tight looking swap.
Big dog that's a clean Lil swap their boy sure you make it look real easy
Much respect for your own swap I did mine too !got a 2dr with a 6.0
Calvin Dubois that’s what I’m thinking about doing next. Been eyeing a box coupe for a few weeks now. If I don’t get this SS, I’m def getting that coupe. Gonna go with the 4.8 though 😎
Calvin Dubois nice. What headers did you go with? Also, what transmission crossmember?
Sprsywaydid an excellent job on ruby with the paint
Man them fluids gonna be ight...it’s a process.. If I find a jet engine I’m gonna put my own in.... good job bruh...
Loving the build my dude
Keep going bro good idea l m sea you from Saudi Arabia
Damn we made it all the way over there sweet 💪🏾💪🏾 صبي قحطانً 505
Good looking homie those 3 guys trying to say u don’t Swapp your cars they can’t say nothing shut them up real quick 💪🏾💪🏾
My cutlass in need of one of these bad... hopefully this year I get mines ..
Big dog cover up those fenders and that clip she too clean for chips
Can u run the oil pan that come on the 5.3 or 6.0 or do u have to use Ls1 oil pan
Bro u got my sub off the intro who made that beat
What headers do you buy from eBay I’m doing a ls swap on my 82 Chevy caprice
Deion how did your Ls project come out on your Box chevy? I have a few questions my self!
Did you have to do any cutting on the frame to get the motor mount on the passenger side to line up?
Straight like that APPLYING PRESSURE
Dame!! I wanna swap mines to an LS, but idk how..
Chevy box ain’t messin around can’t wait for that first start up
Do a video on the wiring so it will crank up big dog
Is that an 70 chevelle under the tarp...I do my swaps single handed too homie....good work ....atf puddles are inevitable....my nova took about 6 months my c10 I had done In 1 month...trucks are easy
Trent Robey yes it is
Bro how much do i need to do mine i got the same 89 box im frm Detroit
Your a bad man! Want to hear it!
The engine hoist that you used is it a 1ton or 2 ton
I really want that 2011 caprice..
Man I wish I knew how and had the tools and space to do this type of shit
Great video
Good work brother cant wait for the update
Great Job. I have a 85 box Chevy Impala. I want you to a ls swap for me. How much do you charge for everything? I’m in Baton Rouge, La so I’m not that far from you.
Nice Bro way to get her done
Question... I have a 89 Box and putting a LS3 6.2L with the transmission that came with it. I'd like to know which site did you go to as far as the purchase for the motor mount and transmission cross member? Thank you.
R.I.P
Put a Corvette intake manifold an corvette injectors in that beast. Look forward to watching the build.
Texas drifters tv that’s a trailblazer SS intake it flows better and I do have bigger injectors new video dropping in 20 min
That’s awesome bro. I have a Nissan 240sx I want to LS swap it one day I watch these videos to learn everything about LS motors.
Just have a question what kind of manifold are headed the name of them did you use for your bill because I have a 86 Caprice I am trying to drop my LS but don't want to cut on the frame
Question what vehicles have the ls motors u swapping out of is it yukon or tahoe,or Corvette motor?and do u replace the transmission outta the box our is it universal?
Did you have to fabricate the motor mounts or did you buy some that fit perfect also did you have any problems with the oil pan ?
I got a 442 motor and trans from a Oldsmobile and I was wondering would it fit in my 85 caprice what all do you think I have too change
regal rider yes it will
Ms. Ruby!!!
Aye big homie I was gonna get a ls and transmission from a 96 bubble. I was gonna ask you do you have to get a new wiring or do the 305 wire's work ?
Hey were did u get that part for touch screen raido with the original nobs .
Damn that was fast, great video
KingJoshua Films bro it’s easy man for real thanks for the support all in one day
KingJoshua Films I just left a comment on your last video big bro
I Am dropping a new video explaining that today but u don’t really it’s all in where u set the motor
Bro call me 228-731-4647
What trans was in the car
what are you running for the shifter, did you run a floor shifter since the trans ins cable insteada linkage?
How was the clearance of the oil pan? My ls was from a truck so the oil pan its too low....im scared that when it runs i hit something...
I wish you lived by me because I want to do in LS swap🤦🏾♂️
Are you going to change the rearend? If so what rearend you going with or are you just going with a conversion kit to lose the drums?
good job brotha
Ain't nothing a lil soap & water can't fix
How much hp dose that motor make stock??
What motor mounts did you use ? I can’t seem to find any that don’t require sum mods to them to fit
How much do a ls swap cost thinking about doing one for my 84 c10 short bed
Depending on you donor rig, ive got bout 1200$ in parts and 200 in a donor burban with 5.3 ls7 dbw. Im doin a 83 c10 shortbed
Joe Cla upload videos
I'm not sure how but I seen them do it on Chevy you can get whole nose off fenders in one hit. Making it wonderful to get at everything. Before Ls, Chevy had corvette lt1 I'm going that route. I got long ways to learn.
How much do u charge for labor for an ls swap for a box chevy?
Buen trabajo amigo
Do truck manifolds fit in box Chevys on the ls swap
Mad props!!! Great work brother.
Hey where you got gas tank from having a hard time finding a baffled one
Wat kind of cams u run with? Man great to see u doin yo thang wit them Ls swaps💯💯
Semisi Vavae Brian tooley cams
Bro
Did ya do that I one day?
Been waiting. Lets get it
how do you wire up your bulkhead to your ls
What kind of headers you use on your LS swap I am having a hard time trying to find some call Summit Racing they said that ones that they had will not fit a b-body they will fit a El Camino so is no the ones that I get
James Evans
ua-cam.com/video/qPAeCopp1Go/v-deo.html
Applying the pressure 💪🏾
Riideo855875
Question .... would it be a good idea to replace a 1986 Caprice 305 with a 2006 3.5 impala as engine and transmission????
It won't work that impala is front wheel drive
I got the same sleep did you have yo change tohe oil pan ima looking forward to putting one in my box
Keep it up tho it’s looking good 💪💪
Motivation💪✊
PRESSURE!!...💪💯
What do I need to do a ls1 swap I need some good pointers
How much horse power you running bro I’m from Jax fl
Nice. Clean box.
I love the fact u put wrestling themes in ur videos
What motor mount kit u use?
Southern Chevy Tv bro i need help I’m trying to do it my self need a parts List
Good shit bro. Cant wait to see the next video on old ruby
What did you get your ls out of
here kitty kitty kitty
I just got the Lt for my coupe doing the swap this weekend
What motor mounts did u use
What manifolds are those?
Got a question Bruh did you use the stock LS harness or call aftermarket harness? I don't know what would be better drive by wire or drive by cable what would you recommend doing for 84 Box Chevy? Your help would be greatly appreciated Bruh
I did drive by cable on mine and the harness I used it from psi conversions
@@SouthernChevyTv will there be a issue if I used a 4L60e transmission the motor and transmission came out of a 2000 Tahoe 5.3.i want to use the transmission 2 I just don't know what I need to make everything work as I want it 2.thanks in advance Bruh
@@terrenceswift7618 I got a 4l60 in Ruby
@@SouthernChevyTv last thing do I need brake pedal 2 disengage the torque converter people been telling me I needed it because the converter won't disengage without it saying I needed wiring harness from the pedal 2 I'm just trying 2 clearify some things sorry for so many questions Bruh
Stop playing with emm bro
💪 💪 💪☝
Can you send me link for those videos
Cant wait to hear the first start up!!!!!!
What trans was that?
Aye big homie show tht crossmember bro
Your doing a good job keep it up
How u gonna run the ac
💥💥💥💥What kind of transmission did your Brougham come with from the factory a 200R4 or is that a 700R? An if it did come with a 200R4 what modifications did you. Need to perform to install of the 4L60E...please elaborate clearly...Mines has a 200R4 in it from the factory... Its causing me doubt doing the LS SWAP😣😣😣
4:22 that’s a hell of a view
💪💪💪💪
The video ive been waiting on
Gifted 💥😎👑🖤
What's your price on a swap
I just brought a caprice lets do a youtube video
Is the ls swap a direct bolt on to the original mounts in the caprice engine bay?
💪🏾💪🏾💪🏾
💪🏽
Sell 305?
Sold it already