Great question! It is my understanding that you would need to update to 70.00.100A first if you have 59.00.560A or older version. Then you can update to the newest version. This link writes it out well: mazdas247.com/forum/t/mazda-connect-firmware-74-00-230a-now-324a.123875753/
Thank you! Worked great. Updated my 2020 CX5. Several days later I declare this a resounding success. Before the update, my screen would go black, disconnect from Android Auto, and often not even start when I would plug in and start the car up. It has run perfectly since the update with zero issues.
This just fixed the system in my 2017 CX-5 that was constantly rebooting, kicking me off bluetooth, etc. The only difference I experienced from the video is that the option I had to choose was "reinstallation" instead of "update" to get from the v59 to v74. The entire process took me less than a half hour. Can't thank you enough!
Thankyou so much for such a great "how to" video and most of all for sharing the files for v74, I directly updated the firmware on my Mazda 2018 from v59 to v74 using the files you shared in the link in the description. It took about 25-30 minutes following your instructions in this video. Thankyou so much!! Truly grateful!!! 🙏🏼
I went from version 59.00.441 straight to 74 without issues. I don't think it's necessary to get version 70 first but I guess it won't hurt anything. Thanks Killobyte!
Thank you so much!!!!! I've sent in complaints to Mazda for years as it is LESS SAFE to lock out the touch screen and have to toggle along through all of the options (i.e. using ways to get to routes, etc.) than it is to have the touch screen properly working and being able to simply hit the right buttons on the screen, where your eyes are not looking down at the console and up to the screen vs. watching the road to quickly glancing at the screen......ONLY WISH I HAD SEEN THIS LAST YEAR!!!!!
Thumb drive successfully loaded and confirmed. Really looking forward to taking care of this myself and not paying a hundred dollars for mazda to do it.
Great video, instructions worked flawlessly on the '20 MX-5 RF. I am interested in your comment on being able to enable touchscreen while moving. Waiting for that video!
Thanks so much for this. Used it for 2018 Mazda 3, as a video demonstration reference alongside the PDF guide provided in a Mazda forum (EU)! I went from 59.00.540 EU N to 74.00.324 EU N in one go without needing the 70.00 update 😊 The guide said this is possible providing your firmware is no older than 56.00.100 EU N Overall firmware install time took a whopping 55 mins to go from 0-100% 😵💫 Apparently the EU file takes longer to install than the NA version!
Thanks for the link to the firmware. Upgraded from 74.00.230 NA because of the bug where the left speakers would go out when connected to Apple CarPlay.
Thank you for the instructions. I'll have to upgrade it. My 19 Mazda 6 is on firmware 70.00.200 ΝΑ N and it reboots itself pretty often and Android Auto doesn't always boot either
Probably a stupid question but can’t find that info anywhere. Can I keep the car door open while the upgrade is in process? Or I have to be in the car with door closed when it’s doing it? When you said you washed your car while it’s doing it then I suppose you left the car, with keys inside and closed the door?
I have 70.00.100 NA N, i am in canada and having issues with a 2019 cx3 where i follow all the steps and the usb is not recognized, im on fat32 and usb is a 32gb lexar and the hash matches
Hi guys, I tried the update got into service mode but was not able to go any further, because I couldn’t touch the screen to input the values. I am currently on version 70.00… Not sure why I have no touch screen
I will really appreciate your help on this. Which one is the international version? Mine is a Japanese 2015 mazda CX-5. The Version is OS 51.00.400. How do I update firmware to have English instead of Japanese?
Excellent tutorial. Have a 2018 japanes cx-5, with firmware 70.00.110 jp m. After doing some checks for a while, have been unable to find update for it, only for other regions. Seems no one has japanese firmware or is willing to share it. Would like to update to latest, since have noticed a few bugs, however worrying that will be unable to do so since unable to find firmware.
I only have a link to the latest North American (NA) version. There are links to an older version for other countries, but it may not be newer than the one you have.
I'm on 70.00.100A in a 2019 Mazda CX5 and I'm confused about the "firmware must be updated before installing the updated USB hub". Do I only need to update the firmware to 74 or is there something else I need to do?
I can see how that might be confusing. The updated USB hub is just the USB hub that supports CarPlay/AA. So if you already have CarPlay/AA just ignore that, you already have the updated USB hub. If your goal is to get CarPlay/AA, update the firmware first to a version that supports the updated USB hub (version 70.xx or higher, this latest version seems to work well), then you are good to install the updated hub. Hope that is more clear.
Hello, I have CX-5 2015 with AA/CarPlay. My OS version is 70.00.100 EU N (without A at the end) Is it okay to update to 74.00.324A? Or this SW is only for NA? I want to enable touchscreen during driving.
I've only got a link for the NA firmware 74.x version which is not the same as the EU version. If anyone has links for the other regions, please share.
@@mendozacsv amigo yo actualize ala versión 74.00.324 le instalo video player a hora no me funciona el carpley ni el Android auto si eres tan amable y me ayuda por fa q tengo q Acer gracias 🫂
@@tatomedianav9971 tienes que instalar el nuevo modulo de mazda, el cual trae cambios en los usb para mas amperaje y deja que funcione AA y CP en esa version
Updating to version 74 today, when connecting usb I noticed your system says “update package” and mine says “reinstallation package” did I copy a wrong file?
So, I think I can do this but I want to clarify that it is important to have the engine off during this process. I just don't trust my battery enough to last 20 minutes- up to 40 minutes. So I'd much rather have my car run the entire time, rather than have it shut off mid-update.
Can you do the upgrade with the car running? I've never tried it and I haven't heard of anyone else trying it. I don't know of a reason why it shouldn't work with the car running, as long as the car is not shutoff during the upgrade, but that doesn't mean there isn't a gotcha. With engine off, my suggestion is to have the battery fully changed at the minimum, connect a trickle charger if you have one (or can borrow one), and make sure there is nothing else draining the battery during the upgrade. You could also do a test run to see if your battery will last the full 40 minutes and then fully charge it again before doing the upgrade. Good luck!
Thank you for your quick response! I just wanted to be sure it wasn't something necessary to the steps, since you mentioned "press button only once without foot on gas" a couple times. I'm too scared to test my battery due to me draining it three times already. Darn car camping and dash cam :(. But if I get my hands on a trickle starter I will try that.
This video has full detailed info on upgrading your Mazda Connect: ua-cam.com/video/jYfH-ikZoUM/v-deo.html And this video shows you how to install the newer USB hub that supports CarPlay/AA, if you don't already have one.
I was too, I'm doing it now. I've got a 2017. As long as your current version is lower than this one, I'd say do it. I'll post again when it's finished.
Okay, this is excellent. Thank you for posting. I will upgrade my 19 (already running 70.something with CarPlay and AA support). Really want the touchscreen while driving. How do I enable that?
Oh my freaking God I did it! Woo hoo! That was terrifying. First install failed and I had to figure out where the room fuse was to follow the error process but I think my car just needed to be woken up sooner than 20 minutes. Oh my goodness that was scary but you just saved me $100!
On your Mazda Connect, go to Settings > System > About and it will show you what version and region you are running. I do this near the end of the video starting at 7:12.
It is my understanding that you would need to update to 70.00.100A first if you have 59.00.560A or older version. Then you can update to the newest version. Here is a link to my video on updating to 70.00.100A: ua-cam.com/video/jYfH-ikZoU/v-deo.html
Dose this works on 2016 mazda 3? I have old software (50.00.750)
Great question! It is my understanding that you would need to update to 70.00.100A first if you have 59.00.560A or older version. Then you can update to the newest version. This link writes it out well: mazdas247.com/forum/t/mazda-connect-firmware-74-00-230a-now-324a.123875753/
Here is a link to my video on updating to 70.00.100A: ua-cam.com/video/jYfH-ikZoUM/v-deo.html
@@Killobyte thanks i will try then inform you through this comment.
@@KillobyteIt works, my 2016 mazda 3 now have 74.00.324NA OS software version.
Thanks a lot man, god bless you.
I have new Mazda 3 2024 and I'm wondering will this update set touch screen for sat nav
Thank you! Worked great. Updated my 2020 CX5. Several days later I declare this a resounding success. Before the update, my screen would go black, disconnect from Android Auto, and often not even start when I would plug in and start the car up. It has run perfectly since the update with zero issues.
This just fixed the system in my 2017 CX-5 that was constantly rebooting, kicking me off bluetooth, etc. The only difference I experienced from the video is that the option I had to choose was "reinstallation" instead of "update" to get from the v59 to v74. The entire process took me less than a half hour. Can't thank you enough!
Thankyou so much for such a great "how to" video and most of all for sharing the files for v74, I directly updated the firmware on my Mazda 2018 from v59 to v74 using the files you shared in the link in the description.
It took about 25-30 minutes following your instructions in this video. Thankyou so much!! Truly grateful!!! 🙏🏼
Just updated from 59 to 74! Thanks for the simple guide 🙂
I went from version 59.00.441 straight to 74 without issues. I don't think it's necessary to get version 70 first but I guess it won't hurt anything. Thanks Killobyte!
Thank you so much!!!!! I've sent in complaints to Mazda for years as it is LESS SAFE to lock out the touch screen and have to toggle along through all of the options (i.e. using ways to get to routes, etc.) than it is to have the touch screen properly working and being able to simply hit the right buttons on the screen, where your eyes are not looking down at the console and up to the screen vs. watching the road to quickly glancing at the screen......ONLY WISH I HAD SEEN THIS LAST YEAR!!!!!
This is incredible! I can't thank you enough. I'll be trying this install next week. woo!
Thumb drive successfully loaded and confirmed. Really looking forward to taking care of this myself and not paying a hundred dollars for mazda to do it.
Mate you are a legend you deserve way more subs ❤ thank you I update mine and works perfectly ❤
I just updated from 59 to 74 excellente 😎🤙🏻
I still cant believe it worked. For so many years searching for this tweak. Thank you so much. So happy 🎉😊 Works on 70.00.367 EU N firmware version
That is awesome news!
Just did an update to the latest firmware for EU region 74.00.324A. Touchscreen lock disabled as on previous firmware. Awesome! Thanks again.
@@mrkeblys25hello. Could you please share the firmware file?
@@josuelapa2271 write down your email
Worked perfectly on my 2021 CX5. Thank you so much.
Thanks for the links, i will try it tomorrow
Great video, instructions worked flawlessly on the '20 MX-5 RF. I am interested in your comment on being able to enable touchscreen while moving. Waiting for that video!
Plan to publish a video on that this weekend.
Thanks so much for this. Used it for 2018 Mazda 3, as a video demonstration reference alongside the PDF guide provided in a Mazda forum (EU)!
I went from 59.00.540 EU N to 74.00.324 EU N in one go without needing the 70.00 update 😊 The guide said this is possible providing your firmware is no older than 56.00.100 EU N
Overall firmware install time took a whopping 55 mins to go from 0-100% 😵💫 Apparently the EU file takes longer to install than the NA version!
Thanks for the info!
how can i get the version 74.00.324 EU N?
Thanks for the link to the firmware. Upgraded from 74.00.230 NA because of the bug where the left speakers would go out when connected to Apple CarPlay.
Saved my bacon, thanks so much
Maybe a link to 74.00.324A EU version?
Can this work on a 2016 CX-5?
Does the file you provide have the modification to let the touch screen work when driving?
thanks for the video, all good.
Thank you for the instructions. I'll have to upgrade it. My 19 Mazda 6 is on firmware 70.00.200 ΝΑ N and it reboots itself pretty often and Android Auto doesn't always boot either
Just did the update this weekend. Worked flawlessly great instructions
@zonacat31 oh boy these are EXACTLY the issues I've been having, I really hope this version 74 fixes it for me
What is the reason of updating firmware before updating USB hub?
I have already updated USB hub, will i have problems when updating firmware?
Probably a stupid question but can’t find that info anywhere. Can I keep the car door open while the upgrade is in process? Or I have to be in the car with door closed when it’s doing it? When you said you washed your car while it’s doing it then I suppose you left the car, with keys inside and closed the door?
i donwloaded the EU version in the description. i have a mazda 2 the file says mazda 3 only. is there any mazda 2 firmware available?
Can I use this for my japanese Mazda (6) Atenza to upgrade to the latest 74 firmware?
My version in vehicle says 11026 so will this work for this?
Can you use that diagnostic test screen to give album art and music tag info priority over Gracenote?
Not that I'm aware of, but that sure would be nice.
Hi! Can i install a north american firmware to mazda philippine car What will be the issue in case?thanks
Can i install this to mazda philippines version?
Can you use android auto with touch on this latest update? Thanx in advance and hoping for a response from you 🙏
What is real difrence vs 56.00.230 (no wont carplay) ?
I have 70.00.100 NA N, i am in canada and having issues with a 2019 cx3 where i follow all the steps and the usb is not recognized, im on fat32 and usb is a 32gb lexar and the hash matches
Sounds like you did it all right. Try a different thumb drive. They don't seem to like some of them.
@@Killobyte thanks, will try a few different drives then
@@Killobyte update worked, took less then 30 minutes, used a sandisk instead of a lexar usb, 2019 cx3 canada
can you upgrade from 51 to 74 directly?
Yes
Hi guys,
I tried the update got into service mode but was not able to go any further, because I couldn’t touch the screen to input the values. I am currently on version 70.00…
Not sure why I have no touch screen
I will really appreciate your help on this. Which one is the international version? Mine is a Japanese 2015 mazda CX-5. The Version is OS 51.00.400. How do I update firmware to have English instead of Japanese?
I've not tried to switch regions. I'm not sure if just installing the NA region would work or not.
Whre can y gep de filmware 74.00.324 EU N
Is it worth upgrading from version 70.00.100A? What are the main differences?
I believe it is only bug fixes. But the upgrade is pretty easy to do.
I have a mazda 3 2019, version 70.000.021 with Apple Car and AA installed. Can I directly install directo version 70.000.324?
Can you install this update afher installed a new media hub? Went through all of it just to find out its not the updated version.
As I understand it, you have to have installed version 70.x or newer before installing the USB hub that supports CarPlay/AA.
Excellent tutorial.
Have a 2018 japanes cx-5, with firmware 70.00.110 jp m.
After doing some checks for a while, have been unable to find update for it, only for other regions. Seems no one has japanese firmware or is willing to share it. Would like to update to latest, since have noticed a few bugs, however worrying that will be unable to do so since unable to find firmware.
If anyone knows of a link or can share, please let us know.
@@Killobyte I've read that Japanese versions are rare and hard to find as JDM Mazdas use a different GPS system than those in other markets.
Will this work on Scion ia
Hello, thanks for the video, I didn't understand if I can upgrade my 2021 ND 2.0 in Italy with the link in the description... thank you
I only have a link to the latest North American (NA) version. There are links to an older version for other countries, but it may not be newer than the one you have.
is it fine to use the North America to my car where the one now for Asia??
If anyone knows, please share the info. Thanks!
I'm on 70.00.100A in a 2019 Mazda CX5 and I'm confused about the "firmware must be updated before installing the updated USB hub". Do I only need to update the firmware to 74 or is there something else I need to do?
I can see how that might be confusing. The updated USB hub is just the USB hub that supports CarPlay/AA. So if you already have CarPlay/AA just ignore that, you already have the updated USB hub.
If your goal is to get CarPlay/AA, update the firmware first to a version that supports the updated USB hub (version 70.xx or higher, this latest version seems to work well), then you are good to install the updated hub. Hope that is more clear.
Hi, can you please share the last firmware file for EU region?
Thanks
If anyone has it, please share. Thanks!
The timer has me a bit worried. It has to be exactly 20 mins, or every 16-18 works?
Every time you do it, it resets the timer. So you can do it every 16-18 minutes no problem.
Hello, I have CX-5 2015 with AA/CarPlay. My OS version is 70.00.100 EU N (without A at the end)
Is it okay to update to 74.00.324A? Or this SW is only for NA?
I want to enable touchscreen during driving.
I've only got a link for the NA firmware 74.x version which is not the same as the EU version. If anyone has links for the other regions, please share.
@@Killobyte Is it possible to enable touchscreen on EU version?
@@jozefgrejtak5450 I would think so but I'm not sure if this version of the software will work or not.
Amigó q buen video yo tengo un Mazda 3 con la versión 59.00.545 lo puedo actualizar ala versión 74.00.324 gracias
Tienes que actualizar primero a la 70.00.100A y después a la 70.00.367A y ahora si puedes instalar la 74.00.324a
@@mendozacsv amigo yo actualize ala versión 74.00.324 le instalo video player a hora no me funciona el carpley ni el Android auto si eres tan amable y me ayuda por fa q tengo q Acer gracias 🫂
@@tatomedianav9971 tienes que instalar el nuevo modulo de mazda, el cual trae cambios en los usb para mas amperaje y deja que funcione AA y CP en esa version
Cambiaste el modulo?@@tatomedianav9971
My carplay randomly disconnects and starts looping. Any idea why?
Make sure your cable is good quality.
I realized my hub isn't oem do you think that matters @@Killobyte
@@JohnTasinas Its possible it's a bad hub, but I'd try a known good USB cable before trying to replace the hub.
how can I obtain this installed flash drive ?
You would want to download the latest version for your region and copy it to a flash drive. The flash drive should be formatted with FAT32.
After adding CarPlay hardware, will I be able to update software as new versions come out?
Yes, but they are saying this is the final version.
@@Killobyte thanks for the reply just did the install today
Updating to version 74 today, when connecting usb I noticed your system says “update package” and mine says “reinstallation package” did I copy a wrong file?
If i have a different region can i update it to NA region or will it be problematic?
I can't say for sure.
So, I think I can do this but I want to clarify that it is important to have the engine off during this process. I just don't trust my battery enough to last 20 minutes- up to 40 minutes. So I'd much rather have my car run the entire time, rather than have it shut off mid-update.
Can you do the upgrade with the car running? I've never tried it and I haven't heard of anyone else trying it. I don't know of a reason why it shouldn't work with the car running, as long as the car is not shutoff during the upgrade, but that doesn't mean there isn't a gotcha.
With engine off, my suggestion is to have the battery fully changed at the minimum, connect a trickle charger if you have one (or can borrow one), and make sure there is nothing else draining the battery during the upgrade. You could also do a test run to see if your battery will last the full 40 minutes and then fully charge it again before doing the upgrade. Good luck!
Thank you for your quick response! I just wanted to be sure it wasn't something necessary to the steps, since you mentioned "press button only once without foot on gas" a couple times. I'm too scared to test my battery due to me draining it three times already. Darn car camping and dash cam :(. But if I get my hands on a trickle starter I will try that.
I have a 2018 cx9. Can you help me please?
This video has full detailed info on upgrading your Mazda Connect: ua-cam.com/video/jYfH-ikZoUM/v-deo.html
And this video shows you how to install the newer USB hub that supports CarPlay/AA, if you don't already have one.
Hey would this work for a 2020 mazda 3? I am having problems with android auto and hoping this would help!
I was too, I'm doing it now. I've got a 2017. As long as your current version is lower than this one, I'd say do it. I'll post again when it's finished.
This version has all the fixes that Mazda plans to do, so hopefully it will fix your issue.
@@benjo4143 great vid, worked great. I just can't move my task bar to the side anymore, but that's an android issue. The update is working great tho
An 2021 ND2 need this update?
Need? If you aren't having any issues and don't care about enabling the Mazda touchscreen to be usable while driving, no you don't need it.
Okay, this is excellent. Thank you for posting. I will upgrade my 19 (already running 70.something with CarPlay and AA support). Really want the touchscreen while driving. How do I enable that?
Video on enabling touchscreen while driving should be published this weekend.
@@Killobyte Can't wait!
does this will work I have a Mazda 3 2018 OS version 70.00.367 4A N? please help me
Based on some other comments, it should work.
Europe ?
Someone can send me the link to install the version 70 please
Link to 70.00.100A is: onedrive.live.com/?authkey=%21ABy4c0jAjyzdeP8&id=8500E5FD85188F46%21128&cid=8500E5FD85188F46
Is it work for mazda6 2016 ?
Yes, if it has the display screen like shown in the video, it should work.
Do you have 74.00.324 eu? Thanks
I don't have it. If anyone does, please share. :)
Okay, big breath. Here I go. *please dont brick. Please dont brick* 🙏
Oh my freaking God I did it! Woo hoo! That was terrifying. First install failed and I had to figure out where the room fuse was to follow the error process but I think my car just needed to be woken up sooner than 20 minutes. Oh my goodness that was scary but you just saved me $100!
And it kept my presets hell yeah
Can you help, how to check the region and what version can I use for Mazda CX 3 2017 with V 59 to update? thanks 🫶
On your Mazda Connect, go to Settings > System > About and it will show you what version and region you are running. I do this near the end of the video starting at 7:12.
It is my understanding that you would need to update to 70.00.100A first if you have 59.00.560A or older version. Then you can update to the newest version. Here is a link to my video on updating to 70.00.100A: ua-cam.com/video/jYfH-ikZoU/v-deo.html
@@Killobyte Thanks 🫶 hope everything will go smoothly.