Maximal Performance BRZ/FRS Oil Cooler Kit Install And Issues (Detailed Guide)
Вставка
- Опубліковано 2 сер 2024
- How to Install the Maximal Performance BRZ/FRS Kit
Link: maximalperformance.com/produc...
Oil pressure gauge install: • How To Wire/Install A ...
Gauge vent mount install: • How To Install A Vent ...
Bought an oil cooler kit from maximal performance. I go through the install and unfortunally all the issues I ran into as well. But overall I still happy with it. Would buy again.
IG: @ds.days - / ds.days
Playlists
BRZ/FRS/86: • Brz/frs/86
GC8/2.5rs: • 2.5RS/GC8 Project Car
WRX: • GD WRX
Chapters
0:00 - In The Box
1:54 - Mounting
4:48 - Mounting Problem
7:08 - Sandwich Plate
9:10 - Oil Hoses
9:44 - Hoses Too Short
14:10 - Cranking The Car
16:06 - Final Setup
17:13 - Drifting
17:40 - Final Thoughts/Review - Авто та транспорт
I got an ebay kit $150 Aud my temps are down and I am boosted overall I was pleasantly surprised at the results.
Great video bro thanks for all the little details included 🤘🏼
Mine is mounted to the side as well like that. I have it bolted down to my Verus front splitter that covers the entire bottom of the front end. My oil filter and my sandwich plate both have their own safety wires to keep it from loosening up. After many track days, the lines are rubbing away at the airbox beside it with some tough scratches so I'll need to check them.
Yea my airbox is getting scratched as well. I’m trying to see if I should get different fittings to angle it away from the air box. Makes it difficult to change the filter too.
Anybody know the brand of socket to get for 27mm bolt that holds down the sandwich plate? My car is just sitting rn cuz I can’t find a socket that will fit into that tiny space
For emergency just use an adjustable wrench. I used that a couple times now and just tightened as much as I could. And it held on track. Cause one you put the filter on it will also add tension to that bolt and will help lock it in. Otherwise I think if you search up thin wall sockets you may be able to track one down.
How much lower were your temps?
Honestly never paid attention to the max temps before the cooler. Got the cooler just for piece of mind. And now I just make sure it hits at least 170-180F operating temp before reving it hard. My guess is max temp dropped 10-20 deg. I am drifting this weekend, I will try to get some numbers.
Update: Highest I hit during a run was 112C (234F). That’s with reving 4.5k to 7k rpm for about 2-3min. Don’t have a reference for without an oil cooler. My guess is for sure drops it 10deg if not more. When I first put it on I noticed on highway driving it was 25deg cooler sometimes.
@@dSDays thanks for the info🤙🏻
Can you give me the link of where you got it from?
Just added it in the description
I order one. I will making a tutorial on how to make a different bracket position for it. I will send you the link once it’s finish.
@@dSDays do you have a oil pressure gauge in your car?
@@saulrubio7047yup, I have it mounted on the driver side vent. Added that before the cooler just incase the cooler lines failed or something
@@dSDays do you have a video about it? And if not do you mind explaining what your set up is please