How to fix clutch with no pressure

Поділитися
Вставка
  • Опубліковано 15 січ 2025

КОМЕНТАРІ • 56

  • @P4qXD
    @P4qXD 10 місяців тому +35

    My clutch doesn’t stick to the floor it just has no stiffness or pressure to it I replaced my clutch and everything bled my master cylinder and now idk what to do.

    • @carsonedgington9409
      @carsonedgington9409 10 місяців тому +3

      Same boat, lmk if you find anything out

    • @thesepter77
      @thesepter77 9 місяців тому +1

      It might be your clutch pipe, that’s the problem with mine but that’s just an idea

    • @alvinsimon8095
      @alvinsimon8095 9 місяців тому

      Did you fix yours?

    • @P4qXD
      @P4qXD 9 місяців тому

      @@alvinsimon8095 yeah

    • @P4qXD
      @P4qXD 9 місяців тому +2

      @@carsonedgington9409 reverse bleed with a syringe, double check if you put the clutch on the right way aswell

  • @jonathanruiz8687
    @jonathanruiz8687 9 місяців тому +2

    I have the same issue, I replaced the slave cylinder and the master cylinder but there’s no pressure, I want to think after bypassing the clutch damper it will help but I’d like some tips if you have any, 1997 hardbody 2.4

  • @Shanno_k
    @Shanno_k Рік тому +3

    Thank u very informative ❤️🙏🙌

  • @Rodriguez105
    @Rodriguez105 Рік тому +2

    I have a 1994 ford ranger just got a complete rebuild on my transmission but I push the clutch and it starts but it won’t go into gear I need help how do I fix this problem I bleed it everything and nothing

  • @WindsorFirebear
    @WindsorFirebear Рік тому +2

    Awesome video

  • @The4thGens
    @The4thGens Рік тому +5

    My clutch on my 96 Camaro has no resistance. You can push it to the floor with a finger and it does return. We noticed it leaked fluid when we put more in. It leaked out of the transmission case, just under the flywheel where there are drain holes. Any idea what’s wrong?

    • @smokymountaingarage
      @smokymountaingarage  Рік тому +2

      I’d try replacing the clutch slave cylinder on your transmission.

    • @rolandolopez1595
      @rolandolopez1595 Рік тому +1

      ​@@smokymountaingaragehey having the same problem. Just had a rebuilt transmission and a new slave cylinder put into it. Clutch was good for a day. Now it stays on the floor. Would it be that it has air??

    • @sammyupload6245
      @sammyupload6245 Рік тому

      Your vehicle has diarrhea

  • @Reefer420
    @Reefer420 8 місяців тому +1

    I have an 04 RSX type s. Clutch sticks to the floor unless pulled back up. When driving though it will shift relatively okay with some sticking after driving. I’m torn between slave cylinder or clutch cable. I had the master slave cylinder replaced a few years back. What would you suggest?

    • @slactusjack7103
      @slactusjack7103 7 місяців тому

      Sounds like a clutch master cylinder issue. It doesn’t hurt to do both and are relatively easy to put on just time consuming. But id go master cylinder

  • @castrolkenya
    @castrolkenya Рік тому +1

    I have mazda 3 2014 has the same problem like that I have changed all of those clutch cylinders but no change what might be the problem

    • @B0B_J0HN
      @B0B_J0HN Рік тому

      If everything is bled correctly. Might have a bad clutch, just spitballing tho.

    • @smokymountaingarage
      @smokymountaingarage  Рік тому

      Sounds like the clutch cylinders need to be bled.

  • @leegorsy
    @leegorsy 5 місяців тому

    My car has the same problem during driving on the highway 6 weeks ago i take the turn off and the clutch has no pressure so unable to change gears. Then it went in gear again and no problems until yesterday it came back the same problem unable to shift the gear. And then all of a sudden it was ok again drove to few places car was ok no problem then this morning again the same problem. Is it possible the cylinder could be on its way out or would u think there could be an air pocket inside thats causing the clutch to stop working?

    • @neolectric03
      @neolectric03 5 місяців тому

      Probly the clutch bearing in the transmission

  • @Flashbeat22
    @Flashbeat22 4 місяці тому

    05 Dodge stratttic goes into gear but doesn't move just jerks forward?

    • @smokymountaingarage
      @smokymountaingarage  2 місяці тому

      I’ve had a similar problem with a stuck brake before. Might also be your clutch. Is it automatic or manual?

  • @bobby.holsinger
    @bobby.holsinger Рік тому

    11 jeep compass clutch is good there was a little air in lines an I tried to get it out an my clutch pedal went away if u pump it like crazy it'll come back next day gone again u know what it could be it was fine up until I loosen the bleeder any tips on how i can get air all the way out an stay out would be much appreciated thanks

    • @smokymountaingarage
      @smokymountaingarage  Рік тому +3

      Maybe order a Bleeder pump or take to a shop to have it bled. Also I have had cheap slave cylinders that have leaked even when brand new.

  • @rayray-fk5zx
    @rayray-fk5zx 11 місяців тому

    I've got a 92 GMC manual,The shifter is floppy,I've replaced the shifter and still nothing. Any ideas anyone would be greatly appreciated

  • @shaylockwood4800
    @shaylockwood4800 Рік тому

    My clutch pedal does what yours does but the cylinder doesn’t move, the clutch just goes flat and then comes up again when you pull it but it’s not engaging the clutch, what’s the issue
    This is on my mg f

    • @smokymountaingarage
      @smokymountaingarage  Рік тому

      What do you mean “The cylinder doesn’t move”?

    • @It.Is.D
      @It.Is.D 6 місяців тому

      I’m assuming he means the slave cylinder doesn’t move at all when you engage the clutch pedal my car is doing the same thing

    • @It.Is.D
      @It.Is.D 6 місяців тому

      @@smokymountaingaragemy clutch pedal also just falls to the floor and does not return unless it is pulled up by hand

    • @blivandealkoholist
      @blivandealkoholist 5 місяців тому

      @@It.Is.Dfind a solution?

  • @fairfax_fran5109
    @fairfax_fran5109 Рік тому +1

    Haven’t drove my 2017 challenger in a month when I charged the battery and started it up the clutch was very soft not normal as it was very stiff only has 33,k

  • @gc3022
    @gc3022 Рік тому +1

    1992 chevy k1500 nv4500, changed master and slave cylinder, and clutch kit, throw-out bearing, pilot bushing, flywheel, clutch and pressure plate, blew out 2 slave cylinders, first one split on casing (plastic), the 2nd (Luk) one gave out replaced seals from the plastic one, built pressure, lasted 1 drive then gave out too, haven't seen where it's leaking from yet, any ideas, or any recommendations on a heavy-duty slave cylinder

  • @bujarvenhari5236
    @bujarvenhari5236 Рік тому

    My clutch is stuck to the floor with a burning smell and screeching noise. Any ideas what that could be?

    • @ghostmattic2118
      @ghostmattic2118 Рік тому

      Happened to me yesterday as well same exact thing screeching noise

  • @issiahamelse-pippenger1620
    @issiahamelse-pippenger1620 Рік тому

    How to fix a clutch master cylinder on a 2004 Dodge Dakota SLT 5 speed 4x4

  • @Cookhouse1000
    @Cookhouse1000 Рік тому

    2005 ford focus

  • @mohaibrahim5875
    @mohaibrahim5875 Рік тому

    What is the problem if I start air Ac the car is low the clutch

    • @smokymountaingarage
      @smokymountaingarage  Рік тому +3

      Could you please reword the question so I have a better understanding of what your asking? thx

    • @Sarcastic-weirdo2043
      @Sarcastic-weirdo2043 9 місяців тому +1

      I to need help. If I run fuel horn the engine beep exhaust

    • @smokymountaingarage
      @smokymountaingarage  8 місяців тому

      I’m having the same issue.

  • @jameslocklear6649
    @jameslocklear6649 Рік тому +1

    I did all this and still have no pressure on my pedal

  • @Cookhouse1000
    @Cookhouse1000 Рік тому

    It's 05