When I first got my go-cart my belt did the same thing and we could not find the right size so I just made my go-cart chain driven instead or belt to chain and it made it go faster.
@@andrewcooper3172 clearly said the belt slipped. If you converted it to chain driven which couldnt slip, it in fact would go faster because there is no belt to slip.
That chain setup is perfect for a comet or Max torque 20 series. Keyword: TWENTY series. Theyre symmetrical vs the asymmetrical 30 series. Shouldn't be too hard to install either!
I wouldn't sweat it with the lawnmower engines. What you want to put on it is a 140cc 4 speed manual pitbike engine. You'll have insane power and top speed. 16hp from a 140cc and only 6.5 from a 212
HAHAHAHA I think that's not a free go kart... for free means NO EXPENSE, NO MONEY SPENDED, NO MONEY ALLOTED. But yours is so amazing! Have watched all the videos about this free go kart and I can see that hardwork gives awesome result!
What you really need to do is take off the belt change it into a chain drive that way you can have different gear ratios more torque or crazy speed also can you please say what bolt pattern that is
Hello Migs. Really Nice Videoes you make... Do you have some Engines that can run really low at idle without stalling.. Maby you can make some video with that.... It sounds so Great. Regards J.
The belt is not supposed to slip at all so should be very tight and let the clutch do all the necessary slippage as it's designed to ok the belt can be nearly solid as it's not like those tension slip clutch belts like on some it's a constant drive belt that can only slip if it really has to if something goes wrong 😉
So I recently brought a I believe it * from the guy I brought it from * a 2002 murray go kart looks like it has a really old 212 predator engine in it but it doesn’t stay on , when I hit the gas while my dad sprays I think brake fluid or something it stays on but if he stops the kart turns off any who what it might be ?
You do know that V drive belts are supposed to be tight don't you? it's not like the chain or belt on a converter 😉 look at the belts on your truck water pump etc and also if the pulley on the engine is damaged at all your belts will not last and the old belts are harder than a new one will be so if the new belt is slipping (less likely to being softer) it will burn out twice as fast as the old one, awesome job and show bro cheers
I have a go karts like that something wrong with it and I need help at first it wouldn't start and then I changed the spark plug then it starts and then when I drive it it drives but then it stops driveing and it won't move I really need help please
Hi I’m wondering if u know how to fix a quad I recently got it fixed and it keeps cutting out and the electric start just got fixed but it’s git no power
When I first got my go-cart my belt did the same thing and we could not find the right size so I just made my go-cart chain driven instead or belt to chain and it made it go faster.
bittyamnate 1 I kinda doubt it made it go faster
@@andrewcooper3172 clearly said the belt slipped. If you converted it to chain driven which couldnt slip, it in fact would go faster because there is no belt to slip.
I just found your channel a few weeks ago and I actually love your content. I learned a lot from your repair videos hahaha
Noahh789 same
@@carlosplesca2133 check out channel you could learn more
Noahh789 same
froggers garage
Is gay
@Rip clixy is gay
hey migs, been watching your channel for not that long, but i love it! thanks for making great content!
Not sure if you realized but you can use the engine mounts to tension the belt and the 4 bolts on the jackshaft only to tension the chain
Its the rust on the clutch that eats the belt up
Keep it going on!. You are the best, hope you reach you goal. Viewers from the United Arab Emirates, Dubai🇦🇪
Love the vids migs. Keep up the great work .
Thanks man!!
That chain setup is perfect for a comet or Max torque 20 series. Keyword: TWENTY series. Theyre symmetrical vs the asymmetrical 30 series. Shouldn't be too hard to install either!
I wouldn't sweat it with the lawnmower engines. What you want to put on it is a 140cc 4 speed manual pitbike engine. You'll have insane power and top speed. 16hp from a 140cc and only 6.5 from a 212
If you love moto migs
👇👇
HAHAHAHA I think that's not a free go kart... for free means NO EXPENSE, NO MONEY SPENDED, NO MONEY ALLOTED.
But yours is so amazing! Have watched all the videos about this free go kart and I can see that hardwork gives awesome result!
I’m hyped im excited that u r finally riding it.
When she hasn't been used in 16 years but that's also her age 😳😳
Badgett 🤣🤣🤣🤣🤣
Underrated comment lmao
Sean i think he lives in new york
@@arberfilms2302 lmao
Loved the vid you gave me inspiration to buld my own i will update you and anyone elce that is interested
Let's goo I've been hyped since the 1st vid on it
Gokart vids are the best
Hey! Cool gokart. I have a question what is the size in diameter of the wheels ? 15, 16 or 17 " ?
“There’s the governor”
Where?! 🤣💀
What you really need to do is take off the belt change it into a chain drive that way you can have different gear ratios more torque or crazy speed also can you please say what bolt pattern that is
Also if you're going to present a on the road a white or put some more Roadie e tires Walmart you can get front lawn mower tires for cheap as $15
YAY WASSUP im here before 4 comments
First 30 minutes
Ok
Yay I'm here before we all die
You should lifted it and do a off road build with sum atv tires
Nice Video!
Great vids Man U realy inspire me to make my own stuff keeep up the great vids
Who else thinks migs should make a mudding mower
Meeeee
Found underrated creator
that paint has held up remarkably well for being that old
Right! I was amazed too
You have earned a new subscriber congratulations 🥳
Thanks!!
You should use an old golf cart for the side by side
Hey migs grate job love the content
Thanks! Appreciate it!!
i have an identical cart, swapped a 30 series with a 7" driven and a 5.4:1 ratio. it only goes 30, but launches like a rocket.
🔥🔥
I'd convert the belt part of the drive to chain last longer than a belt
How Many HP is the engine?
6.5
Pretty cool, 1 question you used the old belt, but couldn't lube and reuse the old chain? Just wondering did you try an lube it? Chains die old
Used PB blaster spray to loosen those valves up in the old motor and let them soak inside that old motor
Tires for those are only like 75$. I had one kind of like that. But tires are cheap and worth it if you’re gonna sell it
It's cool to see that go kart because I have the exact same one with a torque converter
I love this kind of videos
i have the same gokart i love your chanle
Be careful for that seatbelt getting too close to the rear wheel
on of those high vis triangle flags would look great on that migs. and it would make it safer.
New engine New chain
Old belt 🤯
This looks so cool, i wanna get a go -kart now woooohooo
yessss i have been waiting!
after it stalls after riding it awhile try taking off the gas cap and looking in the tank before removing the float bowl. its just easier lol
Oh ya migs 🤟
👍🏻💪🏻
Moto Migs so did you get your 100 thousand subscriber UA-cam play button?
love ur vids
is it a live axel?
Do a video with Steve
Name that’s gone be a BADDDD CART do a few engine mods (simple) put some bigger tires on & she readyyyy
6:45 And there is your gf or sis 😊
Lion could be his mother 😁
Or he got friend zoned lol
Definitely his mom lol... He ain't getting none til he's at least 25-30
slayerfam2 😂😂😂😂😂😂
You can also dump the clutch in gas and it will clean it up
Keep it goin fella ..lovein the projects ya doin.....im doin my own littlel scooter build on youtube at mo..note as good as this thow 😎
U should put off-road golf cart tires on it
Pretty smart kid I need to know what size of tires for a Murray go cart
Lol it’d be great to do my go kart build with you, and have a race lol
Hey did you ever change the tires ?
Hello Migs. Really Nice Videoes you make... Do you have some Engines that can run really low at idle without stalling.. Maby you can make some video with that.... It sounds so Great. Regards J.
What GoPro do you have?
You should put a little race car body on the go cart
Where do you find all these free 4 wheelers and stuff I want one
Hi big fan
Fun fact carter brothers made go carts from 1967 till there factory burned down in 2010
I think you just invented a new tung twister
Best 👌
How bout gettin step through scooter from Honda and convertin it to chain drive cos belts zap your power
I think you should give this go-cart away because you really didn’t spend any money on it and you would be giving thanks to all your subscribers!
noti gang
Migs what's the engine on the work bench for?
Just an old one I had laying around I’ve been messing with
The belt is not supposed to slip at all so should be very tight and let the clutch do all the necessary slippage as it's designed to ok the belt can be nearly solid as it's not like those tension slip clutch belts like on some it's a constant drive belt that can only slip if it really has to if something goes wrong 😉
He need more subs, so do I
Haaaaa don’t lie, u had to cut 2 chains cause u cut the first one and it was short cause the belt wasn’t tight??? That would b my luck.
Carter go-karts started manufacturing in 1967 if that helps you at all.
Whats the update on that future car build
I'd like to know isn't being under its own power mean original motor?
I would name it the freego cart lol
So I recently brought a I believe it * from the guy I brought it from * a 2002 murray go kart looks like it has a really old 212 predator engine in it but it doesn’t stay on , when I hit the gas while my dad sprays I think brake fluid or something it stays on but if he stops the kart turns off any who what it might be ?
You do know that V drive belts are supposed to be tight don't you? it's not like the chain or belt on a converter 😉 look at the belts on your truck water pump etc and also if the pulley on the engine is damaged at all your belts will not last and the old belts are harder than a new one will be so if the new belt is slipping (less likely to being softer) it will burn out twice as fast as the old one, awesome job and show bro cheers
You can rotate that pull start to get to it easier
I have a go karts like that something wrong with it and I need help at first it wouldn't start and then I changed the spark plug then it starts and then when I drive it it drives but then it stops driveing and it won't move I really need help please
Nice
For mine I have a 4L290 belt on it works the best for me
I’ve always wanted a go cart
yo i do that all the time( when u took the carb apart and it was out of gas) lol
Hi I’m wondering if u know how to fix a quad I recently got it fixed and it keeps cutting out and the electric start just got fixed but it’s git no power
dude if you changed the gear ratio on that chain that thing would fly
yo that good as
You should repaint the whole kart black
good luck clearing grass going off road!!!!!!
What happened to the super moto pitbike?
please can i get the dimentions of the rod ends on it bc i have the same go kart but my rod ends arew broken
Are you going to sell the four-wheeler
how many gears does it have?
What tires u running on that
Hey where do u order ur parts from
I've been looking for one
Hi migs I have been watching since the start how Much do you thing a used quad is I think I am paying to much but it's in okay condition love vids 🛵🏍️
He thinks he’s so cool wanting to take it down the road lol
I am 13 and I just did my first engine build with a 5hp Briggs and stratton
Make pls more than 10 min videos like before.