My name is Brad Wilde I have been rebuilding automatic transmissions for over 30 years. I was factory trained at college and ASE certified in transmissions.
i give your presentation 10 out 10. for cleanliness of workshop, of work area, the riight toolsand really clear explanation of what you're doing, This work is not a walk in the park but you have made it easy to understand and appreciate what it is all about. Thank you so much.
Thanks, Brad, for a very informative set of vids. I'll never get inside an automatic transmission myself, but it's very helpful to watch you do it. I especially liked your explanations of assembly errors that can cause problems down the road. The more detail, the better.
I was watching another channel and when he started putting a new 3-4 piston in a filthy transmission full of burnt fluid and grit I stopped and found yours. This is the kind of instructional video I like. Thorough and done right. I'm not quite ready to attempt a rebuild by myself yet But I will definitely watch this build series again.
Thank you for let us watch a professional rebuilding a transmission with so much knowledge and the way you detail and inform the procedures to performed this job. Keep it up Brad.
Seen several videos of transmissions dismantled and reassembled, but you have earned my full respect, as you done the whole job proper way, especially lightly lubricate all the seals and bearing and using hand tools and advising never to use power tools on assembling most critical bolts, finishing with tightening the bolts to its recommended torque settings, really impressed by your work standard ,keep it up, all the very best....thanks for the video from start to finish.
Hi Brad, just wanted to Say thank you very much for your advice and your Videos, after a couple of months of slowly rebuilding my 4L60E (4WD) for my 99 Suburban I am happy to report that it works like a charm, no issues. I greatly appreciate all your knowledge transfer keep the videos coming, Thanks.
Congratulation Mr. Brad for having a very good skill like this it is potential and helpful indeed i wish to know more on how to rebuild the automatic transmission because in Africa especially in the united republic of Tanzania a person like you are very few. once more congratulation.
Hi Brad, watch both vides of rebuilt of 4L60E , its great help , quality, professional work , it was a major overhaul , also like your workshop , very neat n tidy place, great experience learn, imran
Man you are a perfectionist and know exactly what your doing ! I want to congratulate you sir on your skil and know how ! Would like to see you build more automatic transmission, maybe an older Toyota Corolla or something... Thank you for the video ! If you work for a company they're sure lucky to have you . Job well done !!!
Great video series, just finished watching all three, very detailed and informative thanks again!!! i supposed the geniuses with the down votes do not know what a transmission is.
Thank you so much, I have been trying to figure out how to get that 2-4 band in for 2 days now and no one has explained it as well as you did, I hope this helped me enough to get it!!!
Outstanding! Probably the most conscientious (or one of the most) rebuilds I have seen. And I have been watching them all. Getting ready to rebuild my 95 4L60e, which, unfortunately was a one-off year. Thank you for sharing your expertise.
Excellent series. I've built hundreds of these. I'm always on the lookout for better ways to do things. I picked up on a couple of things to make life easier, like the drill bit trick. Thank you
Brad! thank you for sharing this great video. One of the best seen on youtube. I am wondering if there is a way you can give as links or PDF doc. to the measurement and specification for various clutches, endplays, and etc. This will really help newbies like me to disassemble and assemble auto. trans. Thank you again
By the way. My 3T40 transmission failed in reverse. After disassembly it I found two out of four friccion plates worn to the bare metal in the L&R clutch pack. And I also have the L&R piston deteriorated from its outher lips, "a chunk missing and a vertical cut". When you apply air it escapes from the damaged seal. I think this is the major cause as you said:" Old piston seals need to be replaced". Wise words man.
I will use 2 old but resurfaced 0.092" steels to adjust 0.032" to 0.62" the clutch clearance. The cushion cone shaped steel is gone be installed pointing upwards I don´t know why but I´ve seen this practice in a pair of videos. Saludos amigo Brad.
Brad I take another low/reverse piston and flip it over on top of the one I'm installing in the case and use it as a driver and hit that one in with a dead blow. Works every time.
What is the item laying on your shop rag? I hate it when anything is left over when I have things put back together... ;) EXCELLENT tutorial, thank-you!!!
Brad's trana thank you for the video .i have a transmission zf 5hp 19 .the trans do not engage any gear ,fluid and filter was change ,help me please .thank you.
Great video. I got a quick question I hope you can answer. IF you have to take the pump back off (after you torqued it down) can you reuse to pump to case paper gasket?
Excellent video series! I really enjoyed watching it, and your experience really shows Im about to tackle the 4l60e in my 2007 gmc sierra 2wd What overhaul kits do you recommend? Last weekend after exiting the highway, i noticed that upon leaving the first set of lights at an intersection, my 1st to 2nd shift seems a bit delayed... Also 2nd to 3rd does what i believe is called shift flair? Weird thing is, after the truck sits over night, the first little bit of driving seems to be fairly normal... But after that, these 2 problems get worse. But only under heavy throttle. Ive been driving this week with a really light pedal, and its shifting fine... Not sure if maybe the forward pistons are leaking or possibly the accumulator pistons are leaking? Regardless, id like to order a decent kit and pull the trans apart. I will be going over your vids again once i get to this point! Thanks
Just look around on the internet. Remember get a good quality kit with pistons. that does not mean get the most expensive kit. I use Transtar Kits. remember cheep kit means cheep parts.
sir, we just tore a 95 4l60 down.. the only thing we found were REALLY cooked low/reverse clutches,, the guy we bought it from said it had no reverse, but didnt mention no low gear.. what would cause just the low/reverse clutches to burn,., I dont want to put new steels and clutches in and it burn again,, there was alot of clutch material in the 3rd acuumulator bore.. thanks
H Brad, I just took apart my 4L60E. I have 1999 Suburban 4x4, but now I can't decide if I should rebuild it or not. there were broken pieces of metal everywhere. The Outer Ring gear cracked, a big piece of the rear planetary gear set broke off. The broken pieces even got between the low reverse piston and the piston bore and caused deep scratches on both of them. the big question is should I rebuild this Transmission or just get a used one and rebuild that one? can I just sand out the imperfections? I would appreciate any feedback, I don’t want to waste all my work and order a master kit, plus parts for a case that might be a total loss. Thank you.?
great video, I intend to rebuild a 6l8oe soon, just for interest sake how much in us dollars would you pay for a 6l80e with moderate miles on it to rebuild. thanks mark in ( Australia ).
Great video Brad! Two questions though... the anti-clunk spring in the low reverse - I thought you wanted the snap ring to be installed over the flat part of the spring to hold it in place and second, when you install the pump and use a mallet to seat it down don't you worry that you will knock the plastic washer off from underneath and then have an issue with those two tabs not aligning? I know you use trans gel to hold it but I always use the pump bolts to gently move it down so I don't have to worry about the plastic washer coming loose. I don't have anywhere near your experience and expertise in rebuilding so your opinion would be greatly appreciated!
You don't need to have the snap ring over the flat of the anti clunk spring. But its ok if it is, just not over the wide part of the spring. No I never worry about the thrust washer falling off, never has happened in over thirty years of building. Thanks!!
I plan on replacing all of the electronic parts in my valve body this week. My 4l60e has 317k miles. It's never been torn apart. Can you use just new clean transmission fluid to coat the new solenoid o-rings before inserting them in the valve body. I noticed you used assembly gel to coat the o-rings.
Great video. Thanks! I. Want to make sure I understand where the full mark on the dipstick reads while it’s installed so I don’t make a deadly mistake. The full mark / second hole is about a tad more than 1/2” lower than the pan gasket. Is that correct?
I just finished building my 4l60e for my 2004 GMC Yukon. Installed it, and it will not shift out of 1st gear. I checked all the new solenoids with the scanner. They all are working properly. The scanner shows the computer is commanding the shifts right. I removed the valve body. Went thru everything again. Checked the 1-2 and 3-4 accumulator pistons they we're good. I checked the seals and springs on the service also. It still will not shift out of 1st. Even if you manually shift it. I'm all out of ideas at this point. I need someone with more experience to suggest what might be wrong.
Ok the only thing that comes to mind is the valve body. A lot of scanners have a shift transmission function. try that. see if you can hear the solenoids click on and off. Does your speedo work? Is it starting out in first?
I rebuilt my 4L60E, it now shifts great. Unfortunately, I have the same symptom as before, transmission or gear fluid slowly dripping from the extension housing/transfer case meeting point. I read somewhere that this was supposedly a 'dry' area. Any ideas? Could it be the transfer case fluid?
I have so many questions. I have overhauled 10 to 15 of theses so far, and have been successful more or less. I have books and have watched other videos as well but there are still things I get hung up on. I would really enjoy building one with a professional builder just once so I could ask questions. I am a Master L1 certified technician and have been repairing cars for a little over 30 years. If you don’t mind me asking where did you go to school and how much did your schooling help when you first started building? I’m not afraid to pay for knowledge and definitely don’t mind buying tools.
This video far surpasses anything that I've seen so far. Do you place the transmission on a dyno and check the pressures, shift points, look for leaks and all the electrical before you reinstall the transmission? It's a lot of work to put it back in the vehicle and then be disappointed.
No I don't. I cant afford a dyno for home use. In fact the place I work for doesn't have one either. I'm lucky I can't remember the last time I had to pull a transmission back out because it didn't work.
I've watched all 3 videos on the 4L60E rebuild. Good videos. I've lost 3rd and overdrive. I still have 1st and 2nd and reverse. They are still strong. What has failed on my transmission?
Hi Brad wonder which transmission parts should i get for full Rebuilt transmission ? i have 1998 Chevrolet pick up truck engine 5.0 4x4 1500 1/2 ton Cheyenne. and i need to get batter gas milage
Sorry I haven't gotten back to you until now. I don't get an alert with every comment. with that transmission it wont matter what parts you replace for gas mileage. It's all in the way you drive. Sorry>
Brad ~ I pulled up the driveway with my 98' Savana 4L60E & without warning lost all forward gears. I have reverse & it is solid. Do you what has happened? No metal in the pan. Everything clean. Checked fuses, linkage, lines, no a single drop anywhere. I am stranded at a friends house. I see no problems at all. Solenoids?
Thank you again Brad! I just replaced my broken sunshell. I put my trans together and noticed my input shaft play has almost no play at all. I can turn the shaft by hand but I have almost no play at all. Is this an issue or can I install the transmission?
Just did my 94 Astro. I seem to have a lot of side to side movement in my 4L60E output shaft. Is this normal. In and out end play is ok. It just seems sloppy to me....
You should have very little side to side movement. If so you need to replace some bushings and see if there is any worn out parts. replace as necessary.
Hello Brad, I just put up a 4l60E gear box on my blalzler 4.3l 2000 and when I tried to turm the engin on it would not start. With the old grear box the truck would start with one trun of the key. I do not have an idea what really happened. Can you advise on the matter.
the c clip has a slight bevel at the opening. put it so the pointed end is up, this will give the next person something to grab on to when getting the clip out.
@@bradstransmission3846 you are the master! I could not figure out why. Is that why it’s painted? What’s the significance of the yellow paint? I also saw 4 dabs of white paint on top of my planetary. Would you know?
I saw in another video somewhere abroad they rebuilt a 4L60E as well. Is there such a thing as an upgrade kit for one and if so how much more of an extra cost would you estimate it at?
I use ATF because it's easier and cheaper than lube. I use precision kits at work and home they come with Raybestos frictions and steels. There are a lot of friction manufactures out there, just do your homework.
nice job but why would you put the "chatter spring" back in a stock 4x4 instead of using the approved case saver upgrade part it is a better part and is very cheap it will indeed help the life of the 4x4 unit
Martin Caldera I don’t know if there any videos for a THM125 (3T40) in fact I don’t know if you can even get parts for them anymore. I haven’t built one in more then 10 years. Sorry.
Ok sir. After seiing the ATSG 3T40 manual it seems to me: easy to work on. I am making a attack plan to perform well. I also have found the most needed parts but then searched to buy new pistons but it´s been hard to find those. Thanks dear friend.
i give your presentation 10 out 10. for cleanliness of workshop, of work area, the riight toolsand really clear explanation of what you're doing,
This work is not a walk in the park but you have made it easy to understand and appreciate what it is all about.
Thank you so much.
Thanks, Brad, for a very informative set of vids. I'll never get inside an automatic transmission myself, but it's very helpful to watch you do it. I especially liked your explanations of assembly errors that can cause problems down the road. The more detail, the better.
I was watching another channel and when he started putting a new 3-4 piston in a filthy transmission full of burnt fluid and grit I stopped and found yours. This is the kind of instructional video I like. Thorough and done right. I'm not quite ready to attempt a rebuild by myself yet But I will definitely watch this build series again.
Thank you for let us watch a professional rebuilding a transmission with so much knowledge and the way you detail and inform the procedures to performed this job. Keep it up Brad.
Seen several videos of transmissions dismantled and reassembled, but you have earned my full respect, as you done the whole job proper way, especially lightly lubricate all the seals and bearing and using hand tools and advising never to use power tools on assembling most critical bolts, finishing with tightening the bolts to its recommended torque settings, really impressed by your work standard ,keep it up, all the very best....thanks for the video from start to finish.
BEAUTIFUL JOB BRAD, IT IS NICE TO SEE A PROFESSIONAL.
Great instructional video Brad! Best one I've seen on any automatic transmission. Very good job.
Thank you for the great instructions! I am in the middle of my first my rebuild and you have been a great help!
Hi Brad, just wanted to Say thank you very much for your advice and your Videos, after a couple of months of slowly rebuilding my 4L60E (4WD) for my 99 Suburban I am happy to report that it works like a charm, no issues. I greatly appreciate all your knowledge transfer keep the videos coming, Thanks.
Your Welcome.
Did you have to purchase any special tools for this rebuild. Thanks
i have watched over 20 videos in last month and yours is the best thanks,im working on my 94 chevy pu
You deserve a professionalism award! Pat yourself on the back. Keep up the awesome work!
Congratulation Mr. Brad for having a very good skill like this it is potential and helpful indeed i wish to know more on how to rebuild the automatic transmission because in Africa especially in the united republic of Tanzania a person like you are very few. once more congratulation.
Thank You for your comment.
Hi Brad, watch both vides of rebuilt of 4L60E , its great help , quality, professional work , it was a major overhaul , also like your workshop , very neat n tidy place, great experience learn, imran
MASTER AT WORK SHOWING DETAILED NO BS REBUILD. THANK YOU SIR.
Man you are a perfectionist and know exactly what your doing !
I want to congratulate you sir on your skil and know how !
Would like to see you build more automatic transmission, maybe an older Toyota Corolla or something...
Thank you for the video !
If you work for a company they're sure lucky to have you .
Job well done !!!
Great video series, just finished watching all three, very detailed and informative thanks again!!! i supposed the geniuses with the down votes do not know what a transmission is.
Thank you for posting these really good videos on the 4L60e transmission. I’m planning to rebuild my first ever trans in the near future.
Thank you so much, I have been trying to figure out how to get that 2-4 band in for 2 days now and no one has explained it as well as you did, I hope this helped me enough to get it!!!
Good to see a pro see at work i wish here someone like you in the bahamas my guy had my tranmission for 4 weeks and fix it right
Outstanding! Probably the most conscientious (or one of the most) rebuilds I have seen. And I have been watching them all. Getting ready to rebuild my 95 4L60e, which, unfortunately was a one-off year. Thank you for sharing your expertise.
i have 94 pu but i put a 95 engine and trans in,my 94 trans has a12v tcc,the 95 has a pwm lockup solenoid.im still working on it.
just about finished rebuilding my4l60e. thanks to all of you that post how to videos.
Excellent series. I've built hundreds of these. I'm always on the lookout for better ways to do things. I picked up on a couple of things to make life easier, like the drill bit trick. Thank you
Excellent video series! Too many other videos are way to haphazard while yours was very Thorough. Thanks for sharing it!
Thank you I appreciate the lesson, confidence booster to say the least.
Great vid, thank you and keep up skilled work!
Brad excellent job ,especially for your first time.😉
Hahahaha Funny!
brad thank you for a great video part 1/2/3
Take off my hat bro!! You are a beast !!! God bless you,, you have a talent!!👌
Thank You!!!
Thank you very much!
Great video learned alot from it.
Brad! thank you for sharing this great video. One of the best seen on youtube. I am wondering if there is a way you can give as links or PDF doc. to the measurement and specification for various clutches, endplays, and etc. This will really help newbies like me to disassemble and assemble auto. trans. Thank you again
By the way. My 3T40 transmission failed in reverse. After disassembly it I found two out of four friccion plates worn to the bare metal in the L&R clutch pack. And I also have the L&R piston deteriorated from its outher lips, "a chunk missing and a vertical cut". When you apply air it escapes from the damaged seal. I think this is the major cause as you said:" Old piston seals need to be replaced". Wise words man.
Great work made me transmission man I am hanyman ,I do my own work thanks in advance
I am Iranian I every American
IamIranian I love every American spacily president Donold Trump
EXCELENTE EXPLICACION.....THANK YOU
My car is running fine again, I hope it will last longer, thanks a lot Dear Friend.
Martin Caldera you’re welcome. Glad to help.
Great video! Thanks.
I will use 2 old but resurfaced 0.092" steels to adjust 0.032" to 0.62" the clutch clearance. The cushion cone shaped steel is gone be installed pointing upwards I don´t know why but I´ve seen this practice in a pair of videos. Saludos amigo Brad.
great job
I very like it your video sir
Thanks bro loved the video bro...graet job...wish i could have you work on mine .lol asap...
Thank you.
I'm glad to hear you say rattle clip. Instead of clunk spring😛LRE. EDWARDS BROTHERS TRANSMISSIONS ROANOKE RAPIDS NC
speed handle rocks!
Muy agracido desde Panama excelente
English please.
Awesome video! Doing my 1st 60e. Im struggling to get my band in. Seems like the prongs aren't wide enough to fit in its slot in the case
Brad I take another low/reverse piston and flip it over on top of the one I'm installing in the case and use it as a driver and hit that one in with a dead blow. Works every time.
Awesome as usual do you have a video on a 5L60E. I have teardowned one 3 times and still have problem with 5th gear
A1 video...well trained and instructions.
Do you have a video 4L60E input housing? Especially talking about the forward housing
Vera Vacuum sorry no input housing. You can find them on line. And thanks for the comment about the video.
That would be a good video since everyone doing ls swap in old schools these days
otima apresentação
What is the item laying on your shop rag? I hate it when anything is left over when I have things put back together... ;) EXCELLENT tutorial, thank-you!!!
Brad's trana thank you for the video .i have a transmission zf 5hp 19 .the trans do not engage any gear ,fluid and filter was change ,help me please .thank you.
you ever resurface the pump side and VB?
really good share!
larry
grate video
i have one to do
Great video. I got a quick question I hope you can answer. IF you have to take the pump back off (after you torqued it down) can you reuse to pump to case paper gasket?
Thanks! As long as you don't rip the gasket your fine to reuse it.
Excellent video series! I really enjoyed watching it, and your experience really shows
Im about to tackle the 4l60e in my 2007 gmc sierra 2wd
What overhaul kits do you recommend?
Last weekend after exiting the highway, i noticed that upon leaving the first set of lights at an intersection, my 1st to 2nd shift seems a bit delayed...
Also 2nd to 3rd does what i believe is called shift flair?
Weird thing is, after the truck sits over night, the first little bit of driving seems to be fairly normal...
But after that, these 2 problems get worse. But only under heavy throttle. Ive been driving this week with a really light pedal, and its shifting fine...
Not sure if maybe the forward pistons are leaking or possibly the accumulator pistons are leaking?
Regardless, id like to order a decent kit and pull the trans apart.
I will be going over your vids again once i get to this point!
Thanks
Just look around on the internet. Remember get a good quality kit with pistons. that does not mean get the most expensive kit. I use Transtar Kits. remember cheep kit means cheep parts.
Brad's Transmission
Thank you!
sir, we just tore a 95 4l60 down.. the only thing we found were REALLY cooked low/reverse clutches,, the guy we bought it from said it had no reverse, but didnt mention no low gear.. what would cause just the low/reverse clutches to burn,., I dont want to put new steels and clutches in and it burn again,, there was alot of clutch material in the 3rd acuumulator bore.. thanks
Obrigada
H Brad,
I just took apart my 4L60E. I have 1999 Suburban 4x4, but now I can't decide if I should rebuild it or not. there were broken pieces of metal everywhere. The Outer Ring gear cracked, a big piece of the rear planetary gear set broke off. The broken pieces even got between the low reverse piston and the piston bore and caused deep scratches on both of them. the big question is should I rebuild this Transmission or just get a used one and rebuild that one? can I just sand out the imperfections? I would appreciate any feedback, I don’t want to waste all my work and order a master kit, plus parts for a case that might be a total loss.
Thank you.?
great video, I intend to rebuild a 6l8oe soon, just for interest sake how much in us dollars would you pay for a 6l80e with moderate miles on it to rebuild. thanks mark in ( Australia ).
Going to buy me this box at a wreckers yard.
Great video Brad! Two questions though... the anti-clunk spring in the low reverse - I thought you wanted the snap ring to be installed over the flat part of the spring to hold it in place and second, when you install the pump and use a mallet to seat it down don't you worry that you will knock the plastic washer off from underneath and then have an issue with those two tabs not aligning? I know you use trans gel to hold it but I always use the pump bolts to gently move it down so I don't have to worry about the plastic washer coming loose. I don't have anywhere near your experience and expertise in rebuilding so your opinion would be greatly appreciated!
You don't need to have the snap ring over the flat of the anti clunk spring. But its ok if it is, just not over the wide part of the spring. No I never worry about the thrust washer falling off, never has happened in over thirty years of building. Thanks!!
Good to know - thanks Brad!
I plan on replacing all of the electronic parts in my valve body this week. My 4l60e has 317k miles. It's never been torn apart. Can you use just new clean transmission fluid to coat the new solenoid o-rings before inserting them in the valve body. I noticed you used assembly gel to coat the o-rings.
Yes you can.
Great video. Thanks! I. Want to make sure I understand where the full mark on the dipstick reads while it’s installed so I don’t make a deadly mistake. The full mark / second hole is about a tad more than 1/2” lower than the pan gasket. Is that correct?
There should be a crosshatch pattern on the stick. When the transmission is at operating temperature the fluid should be in that area.
good job my friend can you show mi a video of a4ld ford ranger 89
I just finished building my 4l60e for my 2004 GMC Yukon. Installed it, and it will not shift out of 1st gear. I checked all the new solenoids with the scanner. They all are working properly. The scanner shows the computer is commanding the shifts right. I removed the valve body. Went thru everything again. Checked the 1-2 and 3-4 accumulator pistons they we're good. I checked the seals and springs on the service also. It still will not shift out of 1st. Even if you manually shift it. I'm all out of ideas at this point. I need someone with more experience to suggest what might be wrong.
Ok the only thing that comes to mind is the valve body. A lot of scanners have a shift transmission function. try that. see if you can hear the solenoids click on and off. Does your speedo work? Is it starting out in first?
Does it matter what position the pasta discs go to?
I rebuilt my 4L60E, it now shifts great. Unfortunately, I have the same symptom as before, transmission or gear fluid slowly dripping from the extension housing/transfer case meeting point. I read somewhere that this was supposedly a 'dry' area. Any ideas? Could it be the transfer case fluid?
I have so many questions. I have overhauled 10 to 15 of theses so far, and have been successful more or less. I have books and have watched other videos as well but there are still things I get hung up on. I would really enjoy building one with a professional builder just once so I could ask questions. I am a Master L1 certified technician and have been repairing cars for a little over 30 years. If you don’t mind me asking where did you go to school and how much did your schooling help when you first started building? I’m not afraid to pay for knowledge and definitely don’t mind buying tools.
This video far surpasses anything that I've seen so far. Do you place the transmission on a dyno and check the pressures, shift points, look for leaks and all the electrical before you reinstall the transmission? It's a lot of work to put it back in the vehicle and then be disappointed.
No I don't. I cant afford a dyno for home use. In fact the place I work for doesn't have one either. I'm lucky I can't remember the last time I had to pull a transmission back out because it didn't work.
Having trouble finding any diagrams that help with where the thrust washers go. Any advice?
Not sure how much play I'm suppose to have on the sprag in the input drum, any suggestions ?
which side is the upside of the snap ring?
I've watched all 3 videos on the 4L60E rebuild. Good videos. I've lost 3rd and overdrive. I still have 1st and 2nd and reverse. They are still strong. What has failed on my transmission?
Sounds like you burnt up the 3-4 clutch's.
good shit
Thank You!
Great video mate I got a question though. What does the o ring on the input shaft do
It’s for the lockup.
@@bradstransmission3846 ok cool so if it wasn't installed what would a symptom be when in overdrive
@@JoJo-ns6fd Nothing, you would just not get lock up.
I don't get y gm didn't weld the sun shield to the inner planetary gear.
Hey good video ., i have a 2015 yukon that is making all kine of weird shifting , are u perhaps in the NYC area ??
Sorry no. Salt Lake City Utah.
Hi Brad wonder which transmission parts should i get for full Rebuilt transmission ? i have 1998 Chevrolet pick up truck engine 5.0 4x4 1500 1/2 ton Cheyenne. and i need to get batter gas milage
Sorry I haven't gotten back to you until now. I don't get an alert with every comment. with that transmission it wont matter what parts you replace for gas mileage. It's all in the way you drive. Sorry>
Brad ~ I pulled up the driveway with my 98' Savana 4L60E & without warning lost all forward gears. I have reverse & it is solid. Do you what has happened? No metal in the pan. Everything clean. Checked fuses, linkage, lines, no a single drop anywhere. I am stranded at a friends house. I see no problems at all. Solenoids?
no manual low? Forward Sprag?
Maybe band?
mr brad can you tell where to buy a good rebuild kits
OK.nice
8:45 About what is the distance the reverse input drum front face is below the pump land when input drum assembly is fully installed?
It is about 1/8 of an inch lower then the pump face.
La mía dejo de funcionar la reversa ,q me recomiendan repararla completamente o solo reversa
Sorry ?
Where is the input speed sensor ???
Thank you again Brad! I just replaced my broken sunshell. I put my trans together and noticed my input shaft play has almost no play at all. I can turn the shaft by hand but I have almost no play at all. Is this an issue or can I install the transmission?
You only need 0.030 end play so if you have a little your in good shape. Go ahead and reinstall the transmission.
@@bradwilde198het Brad. My end play is .025". What do you recommend?
@@jamesbarbasyou’re good to install the transmission.
Just did my 94 Astro. I seem to have a lot of side to side movement in my 4L60E output shaft. Is this normal. In and out end play is ok. It just seems sloppy to me....
You should have very little side to side movement. If so you need to replace some bushings and see if there is any worn out parts. replace as necessary.
+Brad's Transmission thanks man hopefully it will be ready soon
Hello Brad, I just put up a 4l60E gear box on my blalzler 4.3l 2000 and when I tried to turm the engin on it would not start. With the old grear box the truck would start with one trun of the key. I do not have an idea what really happened. Can you advise on the matter.
Maybe a bad PRNDL switch?
Hello Brad, Is that the neutral security switch. It cranks on P, but does nothing on N
Yes it sounds like the natural safety switch is bad. need to replace it.
I'm guessing he has done this once or twice before.
hi m8 r the clutchs all the same?
I have problem I and II interlace and the third and fourth does not respond؟
Not sure what your talking about. are you sure it's first and second? Not first and third? exactly what do you mean in 1 & 2 interlace?
Does it really matter which side the c clip is installed on the shaft. I have paint on both sides. Can you weigh in on this?
the c clip has a slight bevel at the opening. put it so the pointed end is up, this will give the next person something to grab on to when getting the clip out.
@@bradstransmission3846 you are the master! I could not figure out why. Is that why it’s painted? What’s the significance of the yellow paint? I also saw 4 dabs of white paint on top of my planetary. Would you know?
I saw in another video somewhere abroad they rebuilt a 4L60E as well. Is there such a thing as an upgrade kit for one and if so how much more of an extra cost would you estimate it at?
What kind of upgrade? there is a lot that you can do. "shift kit'' 5 pinion planets, beast shell and valves in the pump and valve body.
As far as some of the gears i saw him replace with carbon, some of the paper sided gears
Trevin Taylor
Maybe the Zpak 3/4 clutches?
Why dont you just use ATF instead of lube? Also, which gasket kit do you use? Also, which frictions and steels do you use? Thanks a bunch.
I use ATF because it's easier and cheaper than lube. I use precision kits at work and home they come with Raybestos frictions and steels. There are a lot of friction manufactures out there, just do your homework.
nice job but why would you put the "chatter spring" back in a stock 4x4 instead of using the approved case saver upgrade part it is a better part and is very cheap it will indeed help the life of the 4x4 unit
Where are u located at an what do u charge to rebuild a 4l60e
That VB plate was junk too, you can totally see where the 1-2 upshift ball has been slamming into the plate. Repair the hole man!
Brad what is this rebuild worth ????
Is there any way that you can install the 2-4 band wrong?
luke Shepherd I don’t know. I never have or seen it happen but hey there is always a chance.
Hello Brad, can you recommend a video to overhaul a 3T40, I am novice DYT and want to fix this transmission, thanks in advance.
Martin Caldera I don’t know if there any videos for a THM125 (3T40) in fact I don’t know if you can even get parts for them anymore. I haven’t built one in more then 10 years. Sorry.
Ok sir. After seiing the ATSG 3T40 manual it seems to me: easy to work on. I am making a attack plan to perform well. I also have found the most needed parts but then searched to buy new pistons but it´s been hard to find those. Thanks dear friend.
Pistons? they don't have molded pistons. Kit should come with new seals for all the pistons. Good luck!
how much are you charge to rebulding a 4l60e is for 1999 chevy tahoe 2wd
It all depends on what's wrong with the transmission. any where from $1200.00 to $2200.00
Never reuse plastic accumulator pistons
do you sell refurbished ones