Such a great outcome for you Tom, as much as this would've been utterly depressing, you found it, fixed it & you're now back on track. It's a never ending journey but your vehicle is mint. What a marathon this has been, but all credit to your skills & dedication mate 👏💪👌✌️
Hey, breaking on the dyno is better than breaking 100 kays in the bush somewhere. I didnt want to say anything in the last video because i know a video is hard to diagnose the cause of a sound. But i am so happy for you that it was just the flexplate and the engine is fine... for now. Big props to the guy at Desta with the truck hook up.
I don't know what you do for a job but I have been watching your videos for a while now in my eyes you are a mechanical genius to do what you have done keep up the good work cheers legend 😊
I had a similar issue with my Isuzu Trooper transmission and finally decided to purchase a special wrench from Capri Tools that would allow me to install those darn torque converter bolts without killing myself AND I used lock tight too! Shalom from Mesa, Arizona USA
If you did them anywhere near tight enough and then put stud locker on (you did it was in the video) it shouldn't come loose, you probably didn’t prime/degrease the hole well enough. I've had to melt the loctite in the past to undo bolts
hey mate those bolts will have lost a large percentage of their yield strength by machining off so much of their heads wouldn't surprise me if they come loose again keep an eye n them a bolt is only as strong as its smallest dimension
@@RoamLyfe its all good willing to help out whenever always help out mani with all his tows your car just gave me motivation to build my patrol once all the parts arrive to mani
Lot´s of talking about the auto. Which auto is in there? I assume it is a 4j. When you do a 12 minute Viedo just tell us what we are looking into. Takes just 1 sentence.
![6BT POWER Mods | GU Patrol Build [EP9]](http://i.ytimg.com/vi/h3oPOepiDHI/mqdefault.jpg)
Sqeaky bum time when you were reversing with the bonnet up 😂😂
So glad to see it's running dude
😆😆😆😆😆
Wouldn’t have these problems with a manual behind a 6BT😉
The problem would be the bank account
Or the ZD30💪
Once the kdp has been removed
Such a great outcome for you Tom, as much as this would've been utterly depressing, you found it, fixed it & you're now back on track. It's a never ending journey but your vehicle is mint. What a marathon this has been, but all credit to your skills & dedication mate 👏💪👌✌️
Great news man . Really felt for ya on the last video
Hey, breaking on the dyno is better than breaking 100 kays in the bush somewhere. I didnt want to say anything in the last video because i know a video is hard to diagnose the cause of a sound. But i am so happy for you that it was just the flexplate and the engine is fine... for now.
Big props to the guy at Desta with the truck hook up.
That’s right, least it’s over with now!
Desta automotive is amazing to deal with! Such a legend 🤘
I don't know what you do for a job but I have been watching your videos for a while now in my eyes you are a mechanical genius to do what you have done keep up the good work cheers legend 😊
Gday, can’t ask for a better outcome then that, looking forward to seeing this on the dyno, cheers
Stoked with the outcome! 🤘
Never ending with these bloody cars aye, all part of the fun though can’t wait too see you enjoy the rig 🤙
Yep all part of it! Safe to say I’ll be checking the flex plate first next time I hear a knock knock 😆
glad U uploaded build
Sounds sick mate, awesome.
I think the code would be the torque converter charge pressure solenoid sensor
I had a similar issue with my Isuzu Trooper transmission and finally decided to purchase a special wrench from Capri Tools that would allow me to install those darn torque converter bolts without killing myself AND I used lock tight too! Shalom from Mesa, Arizona USA
Awesome bro well done 🤙
Hey mate could you go through some of the pricing to achieve such a conversion as this at all? I'd be keen to see cheers.
If you did them anywhere near tight enough and then put stud locker on (you did it was in the video) it shouldn't come loose, you probably didn’t prime/degrease the hole well enough. I've had to melt the loctite in the past to undo bolts
Glad it was a good outcome for you mate.
How good is the flutter on the big girl 👍🏽
Such a great outcome and now we can stop worrying about that blood car and it’s motor problems hay mate.
How close was the clearance of the bonnet from the garage door?
Haha it’s got a bit! I’ve done it a few times so I know it clears! 😆
Love your work, what a relief hey
Thanks mate! Stoked 🤘
Sick video bud
Bet the sphincter was puckered - great outcome
It still hasn’t recovered properly 😆💀
Good evening sir, what is the offset of your rims?
Thats a good outcome, but are you not worried about breaking the crank anyway?
Probably in an older video but what brand and spec is the turbskies?
F55 48.5m wheel, smaller rear housing,
Flex boost turbo from modified explorer!
Good old gods motor 💪
very good find
🤘🤘🤘
Winner winner chicken dinner!!! I was correct haha glad it’s something simple.
But it’s still a stressful situation
You where onto it bro! 🤘
I’m sure you already have by now but call wholesale and speak to Jono. The compushift may need a setting changed.
hey mate those bolts will have lost a large percentage of their yield strength by machining off so much of their heads wouldn't surprise me if they come loose again keep an eye n them a bolt is only as strong as its smallest dimension
yep, I'd be looking for another way to do things there too
Man I wish my finance manager would let me spend the money to start working on my 4J that thing sounds sexy.
😆😆 how good does the flutter sound!
🎣
a bet the missus is also releaved lol. give Wholesale a ring and theyll sort you out.
Hahaha are they ever relieved? Hha
First comment awesome as .. ❤Ya mate 👍
first comment on tj and macs new vid and this one
Legend!
Mani called me to tow it came from the gc to make it happen for you
Bro!! You’re a legend, thank you so much for your help!! We appreciate it a lot!
If there’s anything I can do for you let me know!
@@RoamLyfe its all good willing to help out whenever always help out mani with all his tows your car just gave me motivation to build my patrol once all the parts arrive to mani
Seems like a lot of work to make the same power as a zd crd lol.
Not as cool tho 🤷♂️
The hand grenade zd30? Surely we arent talking about the same engine
@@Eamonn_kelly1 crd zd30 is no more a hand grenade than any other common rail Diesel. 280hp with a gturbo and bigger injectors on my crd zd.
Diesel engines also go stustustustuuu? Im sorry idk much about the new engine.
They certainly dooooooostttuuutuuuutuuuuuuuuuu
Lot´s of talking about the auto.
Which auto is in there?
I assume it is a 4j.
When you do a 12 minute Viedo just tell us what we are looking into. Takes just 1 sentence.
What went wrong? You swapped out a poorly designed motor with another just as shitty engine 😂
Oof early as
Two in one week 🤘🤘
absoultely frothing rn
Go The Patrol! lucky u got it sorted easy ! could have been worse ! 🛻📹😎🤙