This detailed video made me subscribe to your channel. Of all the other wrappers I've seen on UA-cam, this is by far the best and the most detailed steps for a wrap. Thanks for sharing this.
I have ordered a Model Y in white and I was thinking that I would wrap it myself. Then I changed my mind and paid Tesla for a color. I'm glad I did. That is a tough job. You made it look easy. It came out great too.
Looks good man I’m wrapping my 2012 sonata in the same color it’s my first wrap so it’s definitely a longer process so far got the hood and driver door done
Nice work. did you wrap the round cover, for the front pull rod, so its possible to remove it, if customer needs to get towed? i just got my car wrapped and he just covered the cover with wrap, so i cant use it now, he said, that if he did cut a hole in it and wrapped the round cover, it would not be nice to look at, and besides, no one tows a tesla in the front.
Great video, very informative thank you! I’ve got a white model Y and think about to wrap it in full to protect against scratches and get it matte... so I have some questions :) Which film do you advise? Color white matte or just transparent matte for my case? It seems that there are different technics for wrapping: for Xpel, it needs water and not for this one... do you prefer one of these technics and why? which parts did you remove finally, only plastic parts above wheels and side cameras? Can you post the links for the tools you use in the video? Why to make a seem on the mirrors, isn’t it possible to avid it and how? I’ve seen a video with Xpel with no seem on it, how to explain it? Thank you again...
Hey Lam I got a question if you don't mind. I have a model Y and I removed the trim around the door but I am having issues getting the rubber back in? It is the weather trim that covers the screws to the plastic trim. What is the trick to putting this back in correctly? Thank you for your time Aloha
I had trouble too. I either installed the rubber on the trim first and then tried to carefully install it back on the glass B pillar or I used a few of my trim tools to push and wiggle the rubber back in. It’s so tideous
@@KantstandlamGarage Thanks for the reply. Yeah it took a lot of patience and I know its not in 100% correctly but the door closes, just need to make sure it doesn't leak lol. I would put the side closer to me in first than use my squeegee to push in the back rubber over the ledge. Did a pillar delete, deciding on doing a full car. Really appreciate your video on it.
I found a 2 inch x 20ft. roll of Vivid gray carbon fiber wrap on Amazon. Going to try and wrap the chrome rails on the roof of my NX200T. Wish me luck!!! 🤞🏾😅
Tu es un veritable artiste , c'est un vrai beau boulot !!! Trop cher en France ( 4500 €) sur ma model 3 , je verrai l'année prochaine pour le model Y de madame
Hey, looking to wrap my Model Y in the satin psychedelic. What do you think is the minimum amount of roll(ft) I can get away with to wrap the entire car?
This detailed video made me subscribe to your channel. Of all the other wrappers I've seen on UA-cam, this is by far the best and the most detailed steps for a wrap.
Thanks for sharing this.
Agreed.
Did you wrap your car yourself? If so how did it go?
I have ordered a Model Y in white and I was thinking that I would wrap it myself. Then I changed my mind and paid Tesla for a color. I'm glad I did. That is a tough job. You made it look easy. It came out great too.
1k for a colour from Tesla and a wrap is probably 2.5-3k.
@@H0rseMac less than 1000 if you do it yourself. its not that bad if you aint lazy and have patience
Like $200 for a roll of vinyl
@@Kingkee777 it depends on exactly what wrap you’re using. Some of them get pretty expensive while others are more affordable. Still a ton of work.
so soothing to see the skills of another perfectionist
They way you did front bumper is really good
Beautiful job! 🔥 couldn’t think of any other word to describe ur work 😂. Make it look so easy. Subscribed!!!
Great look
Your attention to detail is superb.
Wooo 🥳 good job!
Really, really nice job - Very interesting to watch how it's done and just how much expertise is involved.
Many thanks...... All the way from London !
Looks good man I’m wrapping my 2012 sonata in the same color it’s my first wrap so it’s definitely a longer process so far got the hood and driver door done
True artist. 🙌
Wow! Looks so good!
Inspired me to wrap my 2024 MYP. Subbed. Thanks
NICE!
This is amazing! Loads of respect + mad skills. I've always wanted to try wrapping but i'll leave it to the professionals. Great job :)
Nice work man!
Dude! watched you sell your ISF and I was sad watching. But we now have same car again...I have a Blue/White MYP. Keep posting and thank you! :)
awsome !!!
Work quality!!
Nice job, but would the sensors still work when it is covered by the wrap?
Still have the skills. Nicely done 👌
Amazing job.. my favorite color
Dope color n good job
awesome job!
Nice work. did you wrap the round cover, for the front pull rod, so its possible to remove it, if customer needs to get towed? i just got my car wrapped and he just covered the cover with wrap, so i cant use it now, he said, that if he did cut a hole in it and wrapped the round cover, it would not be nice to look at, and besides, no one tows a tesla in the front.
Sick! Awesome job!
really nice work brother.
I need to see a cybertruck in desert sand camo so badly, with some jerry cans mounted on the back and maybe a 50 cal would be the sickest look yet
Very nice! Just like you said, a black emblem would finish it off
Nicely done! Looks great!
Great job. The hardest part is front bumper
Looks sick!
amazing video. what is the white tape underneath for?
The masking tape? It’s to help the vinyl not stick to the panels as you wrap or tuck the vinyl into certain spots
You have a video on wrapping the tailgate?
I subscribed after watching the video, where do you get the wrap? What kind of care it is needed after installing ?
Looks good! Great job
Nice Job! Looks great! What dimensions and how much vinyl is needed to complete this job? Thank you.
Great video, very informative thank you! I’ve got a white model Y and think about to wrap it in full to protect against scratches and get it matte... so I have some questions :)
Which film do you advise? Color white matte or just transparent matte for my case?
It seems that there are different technics for wrapping: for Xpel, it needs water and not for this one... do you prefer one of these technics and why?
which parts did you remove finally, only plastic parts above wheels and side cameras?
Can you post the links for the tools you use in the video?
Why to make a seem on the mirrors, isn’t it possible to avid it and how? I’ve seen a video with Xpel with no seem on it, how to explain it?
Thank you again...
Great job Bro💯💯💯
Nice job 🙌🏻, is the bumper in one piece
Hey Lam Le, how many yards of the film you used for the wrap? Excellent video btw
Hey I used roughly 60ft or 20yds for this car, with no messing up. Should be enough
one of my favorite colors
Great job! Planning on buying a Tesla and get it wrapped. Where are you located?
This looks so damn good, awesome work.
Nice job! Congrats! Did you remove the spoiler or cut around it? Thank you
I removed it. It was a pain
How much vinyl was used to cover whole Tesla. Looking at buying 59” by however feet long. Thanks in advance
Awesome job, how much vinyl did you have to use for the whole car? Would you need more than 5ft x 75ft ??
No. 60 ft would easily do it.
Yeah 60 should be plenty for a Model Y
@@KantstandlamGarage would that be enough for a Toyota Camry 2018. I figure it would since the Tesla is sort of bigger.
Hey Lam I got a question if you don't mind. I have a model Y and I removed the trim around the door but I am having issues getting the rubber back in? It is the weather trim that covers the screws to the plastic trim. What is the trick to putting this back in correctly?
Thank you for your time
Aloha
I had trouble too. I either installed the rubber on the trim first and then tried to carefully install it back on the glass B pillar or I used a few of my trim tools to push and wiggle the rubber back in. It’s so tideous
@@KantstandlamGarage Thanks for the reply. Yeah it took a lot of patience and I know its not in 100% correctly but the door closes, just need to make sure it doesn't leak lol. I would put the side closer to me in first than use my squeegee to push in the back rubber over the ledge.
Did a pillar delete, deciding on doing a full car. Really appreciate your video on it.
Looks great apart from the Tesla sign being removed. But you can keep it, right?
Fresh
Nice vide! May I know how many feet of vinyl wrap did you use for the project?
WOOOOWW Great job 👍 Looks really fantastic 🧐 You can do my Tesla anytime 👌🏼👌🏼👌🏼
What camera is this? Came out great!
For the time lapse I believe I used my Sony a7iii with a tamron 28-75mm lens. The hand held parts are with a canon g7x mark 2
Awesome video!! What is the flooring in your garage?? I love it!
Theyre called Swisstrax. Love they way they look.
How do you line the decals back on the hood after removing??
How much material did you use ?
🔥🔥🔥
I found a 2 inch x 20ft. roll of Vivid gray carbon fiber wrap on Amazon. Going to try and wrap the chrome rails on the roof of my NX200T. Wish me luck!!! 🤞🏾😅
Tu es un veritable artiste , c'est un vrai beau boulot !!! Trop cher en France ( 4500 €) sur ma model 3 , je verrai l'année prochaine pour le model Y de madame
It's the same price in Norway too 👍 better to pay it I think 🤔 save you a lot of trouble 😀 and better price later if you will sell the car 🐿
🔥🔥🔥🔥🔥🔥🔥
awesome job and video! Any way that you can share the amount of vinyl used? I'd like to DIY my model Y. Thanks in advance!
Hey, looking to wrap my Model Y in the satin psychedelic. What do you think is the minimum amount of roll(ft) I can get away with to wrap the entire car?
60ft is plenty. Maybe even 50ft if you don’t mess up
Looks like you did 3 pieces or maybe 4 for the front bumper. Is there a way to do it in 2?
I did 2 I think. One straight across and one large one over the whole thing. It takes some finessing to get it clean without pull back overtime
What is the cost of such wrap?
How much wrap was needed to wrap model y?
Where did you get the 3M wrap materials from?
You did a great job. I’m in Florida too. Want to do my Tesla? Interested in more work?
How did you do the parking sensors though?
Wrap over them.. They still worked.
@@KantstandlamGarage it didn’t block the sensors? I heard the sensors would go crazy.
Do the senors still work good after wrapping them?
Yes they do. They wont work if you have something like Chrome Vinyl or maybe PPF.
🙌awesome job buddy 👏👏 how much do you charge to wrap a model Y ???
$2200-2500 for labor and materials
@@KantstandlamGarage really? Where are you located?
@@Kwabby1 south Florida
@@KantstandlamGarage do you know anyone near New Jersey that you would recommend?
👍🏾.. The details..
How much does it cost? I have white model x and thinking about wrap
Materials are around $400-600 on average. Labor all depends on the shop you take it too.
@@KantstandlamGarage thank you. Oh so you did your own car? Do you think how much is a fair price total cost including materials? I am clueless
3500
How do you wrap around the emblem?
How much did you end up charging him
Did you use glue on the edges? Thinking about doing this soon
Naw I dont. You shouldnt have to as long as its not overstretched and installed properly .
Hey man how many ft of vinyl do you need for a Model Y? Thanks
5x60ft
excellent très beau travail!
Commenting cause you my Idol
These plastic wraps are a good way to prevent accidentally getting other cars pregnant.
Cost?
thanks alot
Did you used to live in Ohio when you was about 3-4 years old?
Lol naw never.
Missing normal footage of final result outside... Came here only for that.
Car TPU transparent car coat car color change film Chinese manufacturers
Wechat
20 minutes of wrapping and not a good overview of the final result... dissapointing video.
Customer picked it up and hour after I finish so I couldn’t record a walk around
Car TPU transparent car coat car color change film Chinese manufacturers
Wechat